内浮顶油罐的地震反应分析

本文根据壳、板的变形理论,水弹性理论,应用有限元法和源汇法,分析计算了内浮顶油罐—壳-液-板耦联振动体系。本文着重计算和分析了刚性基础上的内浮顶油罐的固有频率、振型和水平地面加速度作用下的动力响应。分析和讨论了各种因素(液面幌动、浮板、顶盖)的综合效应。     

浅谈材料力学冲击应力分析的基本假设

在材料力学教材中,常采用能量法进行冲击应力分析.在教学过程中发现,学生对该理论的适用范围不够清晰,忽略或不能够准确理解基本假设在该问题中的重要性.本文以杆件承受轴向撞击为例,利用弹性动力学理论和有限元方法,给出了杆件受到冲击载荷时的实际动力学响应过程,对比了不同质量比撞击情况下材料力学能量法与弹性动力学理论和有限元方法...     

受冲击弹性圆板动应力集中的数值计算

1 引言在纵向冲击载荷作用下,圆柱体及圆板内产生的应力波经传播及在其自由表面上的反射,将使其某些局部产生动应力集中,进而导致脆性破坏.Kolsky 曾通过冲击实验对此问题进行了较为系统的研究.笔者曾通过数值计算分析了Kolsky 的试验中圆柱内产生的各应力成分的变化情况及动应力集中现象.求得的动应力集中的发生位置同Kolsky的试验结果基本一致.本文采用同样的数值计算方法,以立体图形表示了受冲击弹性圆板中发生动应力集中的部位,并研究了不同的冲击载荷及其作用范围,圆板的尺寸及材料特性等因素对动应力集中的发生及其发生部位的影响.     

采用精确化理论求解厚板任意形开孔动应力集中

摘要：本文基于复变函数与保角映射法,采用平板弯曲振动精确化方程[9],对含任意形开孔平板中弹性波散射与动应力集中问题进行了研究。利用正交函数展开的方法将待解的问题归结为对一组无穷代数方程组的求解。作为算例,计算了自由边界条件下圆孔和椭圆孔的动弯矩集中系数的数值结果,并对板厚与孔径比对动弯矩分布的影响做了分析研究。结果表明：入射波数、平板厚度和椭圆偏心率等参数对动弯矩的分布都有很大的影响。在较低频率和平板较薄的情况下,基于文献[9]的方程与基于Mindlin板的动弯矩结果在数值分布上是基本一致的;在较高频率和平板较厚的情况下,基于文献[9]的方程与基于Mindlin板的动弯矩结果在数值分布计算结果相差较大。由于文献[9]给出的平板振动精确化方程是在没有任何工程假设条件下得到的,因此本文的分析计算结果更精确一些。     

考虑水弹性影响的水下航行体结构动响应研究

考虑水弹性的影响,计及惯性力、水动力和弹性力之间的相互耦合作用,将水动力学方程和结构动力学方程联合求解,采用三维势流理论和边界元法推导并计算了水下航行体结构的附加质量矩阵,对带空泡水下航行体出水过程中的结构动响应问题进行了分析.      

厚圆板轴对称自由振动的三维理论解

本文用三维弹性动力学理论研究厚圆板在柱面约束ｕ＝τｒｚ＝０下的轴对称自由振动问题，给出位移和应力振型的解析表达式，求得固有频率的精确值。研究结果表明：在板的厚度方向存在着不同半波数的反对称形式和对称形式的位移振型，就是说介质之间在厚度方向具有不同的运动形式，这是各种厚板理论都无法反映的。但是对于圆板的轴对称基本振动来说，Ｈｅｎｃｋｙ、Ｒｅｉｓｓｎｅｒ和Ｍｉｎｄｌｉｎ理论求得的固有频率与本文的弹性动     

基于无网格法的非均匀弹性地基上变厚度加筋板弯曲与固有频率分析

采用基于移动最小二乘近似的无网格方法并结合一阶剪切变形理论,分析了非均匀弹性地基上变厚度加筋板的弯曲和固有频率问题.首先,用节点对变厚度板和筋条分别进行离散,导出变厚度板和筋条的势能;其次,利用筋条与变厚度板之间的位移协调条件将筋条的节点参数转换为板的节点参数,再将两者的势能进行叠加得到变厚度加筋板的总势能,并根据能量法得到其动能;最后,利用最小势能原理及Hamilton原理分别得到弯曲控制方程与振动控制方程.由于采用的方法不能直接施加位移边界,故采用完全转换法处理位移边界.本文先计算变厚度板的弯曲及非均匀弹性地基板的固有频率,与文献对比验证方法的有效性;然后对非均匀弹性地基上变厚度加筋板弯曲与 自由振动进行了计算,并将计算结果与有限元结果进行了对比.结果表明,本文方法计算所得结果与文献解及有限元结果之间的误差均小于5％,验证了该方法在计算非均匀弹性地基上变厚度加筋板弯曲与固有频率问题的有效性.     

功能梯度板条的热弹性力学解

本文利用推广后的Mian 和Spencer 功能梯度板理论,研究了功能梯度板条在非均布温度场作用下的热弹性问题．采用该理论中的位移展开公式,在板厚度方向上考虑热传导引起的稳态温度场,材料常数沿板厚方向可以任意连续变化,从而得到了基于弹性理论的功能梯度板条在温度场作用下的解析解．通过数值算例分析,验证了本文理论的正确性并讨论了边界条件和梯度变化程度对功能梯度板条热弹性响应的影响．     

飞机－道面－土基动力耦合系统有限元分析

本文将飞机－道面－土基作为一个相互作用的动力系统，对飞机滑行情况下，弹性半空间地基上刚性道面板的动响应，采用有限元法进行了计算分析。结果表明，本文计算结果与现场实测值吻合很好。由于考虑了飞机和道面之间的耦合作用，避免了实测飞机对道面作用荷载的繁琐工作，因此本文方法具有明显的实用意义。     

梯度密度黏弹性材料的波传播研究

梯度密度黏弹性材料中波的传播比较复杂。为了研究其在冲击载荷作用下黏弹性响应特征,基于控制方程的Euler形式,利用Laplace变换,得到了这种材料中的波传播规律的一个理论公式;并据此分析了双层周期性黏弹性介质中的应力情况。选择具有梯度密度特性的钛-硼化钛（Ti-TiB₂）材料和碳纤维树脂材料,采用不同的叠合方向和方式,利用分离式霍普金森压杆（split Hopkinson pressure bar,SHPB）加载装置进行了动态冲击实验,并用三波法对得到的实验结果进行处理。同时,采用数值Laplace逆变换方法,结合SHPB测得的入射波与透射波数据,使用推导的理论公式计算出理论解,并与实验结果进行了比较。结果表明:（1）梯度钛-硼化钛材料由于内界面和叠层界面的存在,表现出一定的黏性特性;单层Ti-TiB₂材料的计算结果和三波法分析得到的结果基本一致,双层Ti-TiB₂材料叠合后的计算结果与三波法分析结果存在一定的差异。（2）双层碳纤维树脂材料表现出较强的黏弹性特征,应力波的衰减幅度较大,三波法分析结果与该材料的冲击性能有较大的差异。由此可知,无论是细微观结构特征产生的黏性,还是材料本身的黏性,对材料动力学行为的影响都不可忽略。。     

Vibration reduction of floating elastic plates in surface waves

Based on dynamical theories of water waves and dynamics of Mindlin thick plates,the investigation of the wave-induced responses and the vibration reduction of an elastic floating plate are presented using the Wiener-Hopf technique.Without regard to the case of elastic connector,the calculated results obtained by the present method are in good agreement with those from the literature and the experiment.It can be shown that the present method is valid.Relations between the spring stiffness to be used to connect the sea bottom and the floating plate and the parameters of wave-induced responses of floating plates are investigated using the present method.Therefore, these results can be used as theoretical bases for the design stage of super floating platform systems.     

Reflection and transmission of regular water waves by a thin,floating plate

Measurements of the wave fields reflected and transmitted by a thin floating plastic plate are reported for regular incident waves over a range of incident periods (producing wavelengths comparable to the plate length) and steepnesses (ranging from mild to storm-like). Two different plastics are tested, with different densities and mechanical properties, and three different configurations are tested. The configurations include freely floating plates, loosely moored plates (to restrict drift), and plates with edge barriers (to restrict waves overwashing the plates). The wave fields reflected and transmitted by plates without barriers are shown to become irregular, as the incident waves become steeper, particularly for the denser plastic and the moored plate. Further, the proportion of energy transmitted by the plates without barriers is shown to decrease as the incident wave becomes steeper, and this is related to wave energy dissipation.     

Diffraction of surface waves by floating elastic plates

Based on the dynamical theories of water waves and Mindlin thick plates, the diffraction of surface waves by a floating elastic plate is presented by using the Wiener–Hopf technique. Firstly, the problem is related to a wave guide in water of finite depth, which is analysed to determine the poles. The resulting hybrid boundary value problem is reduced to solving an infinite system of linear algebraic equations. The results obtained are compared with those calculated by an alternative analysis, and with experimental data. Finally, the effects of the geometric and physical parameters on the distribution of deflection and bending moments in plates are analysed and discussed.     

Wave interaction with multiple articulated floating elastic plates

Flexural gravity wave scattering by multiple articulated floating elastic plates is investigated in the three cases for water of finite depth, infinite depth and shallow water approximation under the assumptions of two-dimensional linearized theory of water waves. The elastic plates are joined through connectors, which act as articulated joints. In the case when two semi-infinite plates are connected through a single articulation, using the symmetric characteristic of the plate geometry and the expansion formulae for wave-structure interaction problem, the velocity potentials are obtained in closed forms in the case of finite and infinite water depths. On the other hand, in the case of shallow water approximation, the continuity of energy and mass flux are used to obtain a system of equations for the determination of the full velocity potentials for wave scattering by multiple articulations. Further, using the results for single articulation and assuming that the articulated joints are wide apart, the wide-spacing approximation method is used to obtain the reflection coefficient for wave scattering due to multiple articulated floating elastic plates. The effects of the stiffness of the connectors, length of the elastic plates and water depth on the propagation of flexural gravity waves are investigated by analysing the reflection coefficient.     

Hydroelastic interaction between water waves and thin elastic plate floating on three-layer fluid

The wave-induced hydroelastic responses of a thin elastic plate floating on a three-layer fluid, under the assumption of linear potential flow, are investigated for two-dimensional cases. The effect of the lateral stretching or compressive stress is taken into account for plates of either semi-infinite or finite length. An explicit expression for the dispersion relation of the flexural-gravity wave in a three-layer fluid is analytically deduced. The equations for the velocity potential and the wave elevations are solved with the method of matched eigenfunction expansions. To simplify the calculation on the unknown expansion coefficients, a new inner product with orthogonality is proposed for the three-layer fluid, in which the vertical eigenfunctions in the open-water region are involved. The accuracy of the numerical results is checked with an energy conservation equation, representing the energy flux relation among three incident wave modes and the elastic plate. The effects of the lateral stresses on the hydroelastic responses are discussed in detail.     

Linear water wave propagation through multiple floating elastic plates of variable properties

We investigate the problem of linear water wave propagation under a set of elastic plates of variable properties. The problem is two-dimensional, but we allow the waves to be incident from an angle. Since the properties of the elastic plates can be set arbitrarily, the solution method can also be applied to model regions of open water as well as elastic plates. We assume that the boundary conditions at the plate edges are the free boundary conditions, although the method could be extended straightforwardly to cover other possible boundary conditions. The solution method is based on an eigenfunction expansion under each elastic plate and on matching these expansions at each plate boundary. We choose the number of matching conditions so that we have fewer equations than unknowns. The extra equations are found by applying the free-edge boundary conditions. We show that our results agree with previous work and that they satisfy the energy balance condition. We also compare our results with a series of experiments using floating elastic plates, which were performed in a two-dimensional wave tank.     

The coupling between ocean waves and rectangular ice sheets

This paper describes a semi-analytic approach to problems involving rectangular elastic plates of shallow draft floating on water. Specifically, two problems are considered: the scattering of plane monochromatic incident waves by a single elastic plate and the propagation/attenuation of waves through a periodic rectangular arrangement of plates. The approach combines Fourier methods with Rayleigh–Ritz methods for free modes of rectangular plates which reduces each problem to an algebraic system of equations which are numerically accurate and efficient to compute. A selection of results are given to illustrate the work. The approach can be applied to many problems in hydroelasticity including the seakeeping of large flat-bottomed marine vessels, deflections in very large floating structures such as offshore airports and wave propagation through areas of broken sea ice.     

A special solution of wave dissipation by finite porous plates

The reflection and transmission of water waves caused by a small amplitude incident wave through finite fine porous plates with equal spacing and permeability in an infinitely long open channel of constant water depth and zero slope are studied. A special solution is obtained when the distance between the two neighbouring plates is an integral multiple of the half-wavelength of the incident wave. It is found, that when the dimensionless porous-effect parameter G_0 is equal to half the total plate number, the wave dissipation reaches a maximum, and only 50% of the incident wave energy remains in the reflected and transmitted waves. Meanwhile, the reflected and transmitted waves have the same amplitude.     

A variational solution of coupled vibration for moderately thick floating plate seated on the sea floor with variable water depth

Based on Reissner's plate theory, a localized variational principle for the coupled vibrations of moderately thick floating plates seated on the sea floor with variable water depth is presented in this paper. It will be a powerful tool to formulate various approximate methods of moderately thick floating plates. By means of this variational principle a formula for calculating the natural frequencies of moderately thick floating plates is also obtained. A numerical example shows that high accuracy and computational time saving may be achieved in calculation.     

变水深环境下中厚度浮板耦振问题的一个变分解

本文从Reissner 板的理论出发,提出并论证了变水深环境下中厚度浮板耦振问题的一个局部变分原理,它是建立中厚度浮板各种近似分析方法的一个有力工具,借助这个变分原理,文中还导得了一个计算中厚度浮板固有频率的一个变分式,数值算例表明本文方法具有精度高和省机时的优点。