首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
Stress calculation formulae for a ring have been obtained by using Airy stress function of the plane strain field with the decomposition of the solutions for normal stresses of Airy biharmonic equation into two parts when it is loaded under two opposite inside forces along a diameter. One part should fulfill a constraint condition about normal stress distribution along the circumference at an energy valley to do the minimum work. Other part is a stress residue constant. In order to verify these formulae and the computed results, the computed contour lines of equi-maximal shear stresses were plotted and quite compared with that of photo-elasticity test results. This constraint condition about normal stress distribution along circumference is confirmed by using Greens’ theorem. An additional compression exists along the circumference of the loaded ring, explaining the divorcement and displacement of singularity points at inner and outer boundaries.  相似文献   

2.
The thermal properties of a nanostructured semiconductor are affected by multi-physical fields,such as stress and electromagnetic fields,causing changes in temperature and strain distributions.In this work,the influence of stress-dependent thermal conductivity on the heat transfer behavior of a GaN-based nanofilm is investigated.The finite element method is adopted to simulate the temperature distribution in a prestressed nanofilm under heat pulses.Numerical results demonstrate the effect of stress field on the thermal conductivity of GaN-based nanofilm,namely,the prestress and the thermal stress lead to a change in the heat transfer behavior in the nanofilm.Under the same heat source,the peak temperature of the film with stress-dependent thermal conductivity is significantly lower than that of the film with a constant thermal conductivity and the maximum temperature difference can reach 8.2 K.These results could be useful for designing GaN-based semiconductor devices with higher reliability under multi-physical fields.  相似文献   

3.
The aim of this study is to describe the main behavior of cement-based materials under large compression state based on the recent experimental research. In this paper, the strainstress relations are firstly analyzed and confining pressure state is regarded as low/medium/high state. A generalized cup modeling is introduced by a coupled deviatoric shearing, pore collapse and damage mechanism within thermodynamic framework. A series of numerical simulations are performed for the considered cement paste and concrete. Comparisons between numerical predictions and experimental results show that the proposed model is able to describe the main features of mechanical behavior under large range of compression state.  相似文献   

4.
The present work deals with the computation of the gas-solid two-phase flow pressure drop across thin and thick orifices for a vertically downward flow configuration at the higher limits of a dilute phase flow situation(0.01≤αs,in≤0.10).The Eulerian-Eulerian(two-fluid)model has been used in conjunction with the kinetic theory of granular flow with a four-way coupling approach.The validation of the solution process has been performed by comparing the computational result with the existing experimental data.It is observed that the two-phase flow pressure drop across the orifice increases with an increase in the thickness of the orifice,and the effect is more prominent at higher solid loading.The pressure drop is found to increase with an increase in the solid volume fraction.An increase in the Reynolds number or the area ratio increases the pressure drop.An increase in the size of the particles reduces the pressure drop across the orifice at both small and relatively large solid volume fractions.Finally,a two-phase multiplier has been proposed in terms of the relevant parameters,which can be useful to evaluate the gas-solid two-phase flow pressure drop across the orifice and can subsequently help to improve the system performance.  相似文献   

5.
6.
Open-sided draft tubes provide an optimal gas distribution through a cross flow pattern between the spout and the annulus in conical spouted beds.The design,optimization,control,and scale-up of the spouted beds require precise information on operating and peak pressure drops.In this study,a multi-layer perceptron(MLP)neural network was employed for accurate prediction of these hydrodynamic characteristics.A relatively huge number of experiments were accomplished and the most influential dimensionless groups were extracted using the Buckingham-pi theorem.Then,the dimensionless groups were used for developing the MLP model for simultaneous estimation of operating and peak pressure drops.The iterative constructive technique confirmed that 4-14-2 is the best structure for the MLP model in terms of absolute average relative deviation(AARD%),mean square error(MSE),and regression coefficient(R2).The developed MLP approach has an excellent capacity to predict the transformed operating(MSE=0.00039,AARD%=1.30,and R2=0.76099)and peak(MSE=0.22933,AARD%=11.88,and R2=0.89867)pressure drops.  相似文献   

7.
为了评估弹体飞行中产生的气动热对弹头引信的影响,采用计算流体动力学(CFD)方法对某火箭弹标准外形引信体在飞行条件下的气动加热过程进行了数值计算与分析.计算中,将获得的某火箭弹实际弹道参数进行了分段线性拟合,得到了计算域入口处的速度、温度、压强与时间的函数关系;结合分析对象的特点,采用结构化网格、远场压力边界条件、k-ε模型,利用有限体积法、耦合求解法模式、二阶迎风格式进行求解,得出了某火箭弹标准外形引信在弹道中不同时刻的温度场变化规律.计算结果与遥测试验结果的比较表明:两者变化的趋势及量值大小相吻合,两者的最大误差为13.0%,满足工程应用要求.  相似文献   

8.
Computational fluid dynamics(CFD)has become a valuable tool to study the complex gas-solid hydrodynamics in the circulating fluidized bed(CFB).Based on the two fluid model(TFM)under the Eulerian-Eulerian framework and the dense discrete phase model(DDPM)under the Eulerian-Lagrangian framework,this work conducts the comparative study of the gas-solid hydrodynamics in a CFB riser by these two different models.Results show that DDPM could be used to predict gas-solid hydrodynamics in the circulating fluidized bed,and there are differences between TFM and DDPM,especially in the radial distribution profiles of solid phase.Sensitivity analysis results show that the gas-solid drag model exhibits significant effects on the results for both the two models.The specularity coefficient and the restitution coefficient in the TFM,as well as the reflection coefficient and the parcel number in the DDPM,exhibit less impact on the simulated results.  相似文献   

9.
Hierarchical defects are defined as adjacent defects at different length scales.Involved are the two scales where the stress field distribution is interrelated.Based on the complex variable method and conformal mapping,a multiscale framework for solving the problems of hierarchical defects is formulated.The separated representations of mapping function,the governing equations of potentials,and the stress field are subsequently obtained.The proposed multiscale framework can be used to solve a variety of simplified engineering problems.The case in point is the analytical solution of a macroscopic elliptic hole with a microscopic circular edge defect.The results indicate that the microscopic defect aggregates the stress concentration on the macroscopic defect and likely leads to global propagation and rupture.Multiple micro-defects have interactive effects on the distribution of the stress field.The level of stress concentration may be reduced by the coalescence of micro-defects.This work provides a unified method to analytically investigate the influence of edge micro-defects within the scope of multiscale hierarchy.The formulated multiscale approach can also be potentially applied to materials with hierarchical defects,such as additive manufacturing and bio-inspired materials.  相似文献   

10.
The effect of particle shape modification on the segregation reduction of enzyme granules in laundry detergent powder mixtures was investigated,both experimentally and computationally using Deseret Element Method(DEM).The shape of modified enzyme particles was in such a way that the large and dense enzyme particles were layered by other fine particles in the detergent powder,by means of a process known in the literature as“seeded granulation”.It is found that the homogeneity of modified enzyme particles could be improved significantly comparing to the original spherical enzyme particles in powder mixtures.Overall,the results of this research demonstrated that the segregation-induced properties of the dense/spherical enzyme particles could be lowered by altering their shape,which could enable the enzyme particles to behave almost similar to other ingredients during the pile formation process.  相似文献   

11.
Flying and swimming in nature present sophisticated and exciting ventures in biomimetics, which seeks sustainable solutions and solves practical problems by emulating nature's time-tested patterns, functions, and strategies. Bio-fluids in insect and bird flight, as well as in fish swimming are highly dynamic and unsteady; however, they have been studied mostly with a focus on the phenomena associated with a body or wings moving in a steady flow. Characterized by unsteady wing flapping and body undulation, fluid-structure interactions, flexible wings and bodies, turbulent environments, and complex maneuver, bio-fluid dynamics normally have challenges associated with low Reynolds number regime and high unsteadiness in modeling and analysis of flow physics. In this article, we review and highlight recent advances in unsteady bio-fluid dynamics in terms of leading-edge vortices, passive mechanisms in flexible wings and hinges, flapping flight in unsteady environments, and micro-structured aerodynamics in flapping flight, as well as undulatory swimming, flapping-fin hydrodynamics, body–fin interac-tion, C-start and maneuvering, swimming in turbulence,collective swimming, and micro-structured hydrodynamics in swimming. We further give a perspective outlook on future challenges and tasks of several key issues of the field.  相似文献   

12.
双柱单锥型液-液旋流管内流场的激光诊断   总被引:2,自引:0,他引:2  
陆耀军  沈熊  周力行 《力学学报》1997,29(4):395-405
应用激光测速仪,对一种双柱单锥型液 液旋流管内的流动结构,进行了全场范围内的多工况流动诊断研究.揭示出其切向速度由内旋流区和外旋流区构成,其中内旋流区中的速度分布符合准强制涡关系,外旋流区中的速度分布符合准自由涡关系;轴向速度由上行流动区和下行流动区构成,两者之间在直管段以零速点作分界,在锥体段则以零速区作过渡并伴随有一定的回流出现,且该过渡区或回流区的大小随锥体截面的收缩而减小,直到进入直管段后消失;各湍流量的分布以管芯处最大向外逐渐减小,沿轴向是直管段中的湍流度大于锥体段中的湍流度,而且湍流度在旋流管内具有各向异性的特性.  相似文献   

13.
黄土构造节理研究及其应用   总被引:3,自引:0,他引:3  
作者发现大量不同力学性质的黄土构造节理后,识别了它们的区域性、系统性特征;认定其两组扭裂面代表新构造应力场最大剪切应力方向,利用黄土构造节理系及由其控制的土层沟槽网络恢复了相应地区Q3-4构造应力场;提出构造节理是黄土区地下水运移的主要通道和赋存的场所;发现构造节理是黄土区地裂缝、滑坡、崩塌和水土流失等地质灾害的构造基础之一,证实构造节理是黄土地层的软弱面,风化和继之而来的应力侵蚀就由此开始,进而逐步塑造黄土碟、穴、井、桥、柱、墙、沟等潜蚀地貌和部分侵蚀地貌。研究黄土构造节理对恢复新构造应力场、帮助预测地裂乃至地震活动、控制水土流失和滑塌灾害、进行工程乃至区域稳定性评价、重新认识黄土潜蚀地貌发育规律、指导干旱半干旱黄土区找水,既有理论意义又有实际意义。  相似文献   

14.
定床弯道内水沙两相运动的数值模拟   总被引:1,自引:0,他引:1  
在适体同位网格中采用非正交曲线坐标系下的三 维k-ε-kp固液两相双流体湍流模型研究弯道内水流和悬浮泥沙运动,主要计算了试验室S 型水槽内清水流动的三维流场、120°弯道内水沙两相流动中底沙与底流的运动轨迹以及 S型水槽内水沙两相流动的两相流场和泥沙浓度场. 对于S型水槽内清水流动,数值结果与 试验结果吻合良好. 120°弯道内水沙两相流动中固液两相的运动轨迹在弯道直线段基本 重合,在弯道内泥沙轨迹逐步偏离水体轨迹,其偏离程度随泥沙粒径增大而增大. 从S型水 槽内水沙两相流动计算结果中发现泥沙纵向流速在壁面附近比水流纵向速度大,在远离壁面 区域比水流纵向速度小;弯道内泥沙横向流速比水流横向流速小;垂向流速在直线段和泥沙 沉速相当,在弯道内受螺旋水流影响而变化;两相流速差别随泥沙粒径增大而变大;泥沙浓 度呈现下浓上稀的分布,在弯道内横向断面上呈现凸岸大凹岸小的分布,泥沙浓度随泥沙粒 径增大而减小.  相似文献   

15.
The performance of the Galerkin finite element method when applied to time-dependent convection involving rotation, self-gravitation and the normal gravity field in a horizontal cylinder is discussed in this paper. The governing equations, the parameters of the problem and our implementation of the numerical schemes are presented. The accuracy, spatial scale of resolution, flexibility and robustness of the resulting code show the element method as a valuable tool for research in this area or in related problems in astrophysical fluid dynamics. The numerical difficulties in large-amplitude flows are associated with an error-control scheme for time integration and the ‘short-time’ wiggles in transient Dirichlet problems. Coarse grids give the correct qualitative picture in most simulations, but the type of solution at short time (and hence grid refinement) presumably resolves the degeneracy in the azimuthal orientation of convection cells in flows driven by self-gravitation and (perhaps) centrifugal buoyancy. The final state in transient flows is a motionless isothermal fluid. However, residual motions can be nullified only in the limit of zero grid size in flows driven by centrifugal buoyancy (self-gravitation), while a fairly coarse grid is sufficient for this purpose in normal gravity-driven flows.  相似文献   

16.
为了解氢燃料爆震过程中压力波与火焰之间相互匹配的特性,在60mm60mm2000mm 方 爆震管内,用氢气和空气混合物进行了单爆震性能研究。在爆震转捩区内布置压力传感器与离子探针,用来 监控压力波和火焰的信号,同时利用高速摄影仪集中拍摄转捩区域。根据压力波和火焰面在爆震管不同时刻 的强度特性、速度特性及位置特性来分析爆震过程中波与火焰匹配的规律。结果表明:压力波和火焰的强度 呈现为相互正反馈匹配性质;缓燃向爆震转捩(DDT)过程中,压力波和火焰的速度表现为相互交替的变化过 程,且缓燃阶段中火焰速度的增幅大于压力波速度的增幅;当火焰面追赶上激波时,产生过爆,火焰面会临时 位于激波前面;在过爆衰减为正常爆震波的过程中,激波在火焰前面。  相似文献   

17.
混凝土破坏理论研究进展   总被引:25,自引:2,他引:23  
郭少华 《力学进展》1993,23(4):520-529
本文综述了混凝土的材料性质、破坏特点及机理,回顾了断裂力学与损伤力学在混凝土材料破坏研究中的应用,对当前混凝土破坏研究的主要问题和今后方向进行了讨论与展望。  相似文献   

18.
本文总结了近60 年来分层流动中湍流特性研究的成果. 主要从两个方面进行了综述:(1) 分层流动中湍流场的演变和混合. 在这方面主要分析稳定分层对湍流混合和湍流结构的影响, 以及混合层内湍流结构的特性和混合层的演化规律. (2) 分层流动中湍流的扩散和输运. 动量和标量的逆梯度输运特性是分层湍流研究的一个重要方向;分析分层对湍流扩散的影响. 并指出了一些值得今后进一步研究的方向.  相似文献   

19.
基于确定靶体中速度势和速度场的方法分析刚性卵形头部弹体对有限厚靶的侵彻问题。推导了靶体中速度场与应力场的计算方法,利用据此编制的计算程序,计算了卵形头部钢弹体对铝靶的侵彻与穿透问题,给出了侵彻深度与剩余速度同初始碰撞速度的关系。结果表明,在对实验参数不经过任何调整的情况下,得到了同试验曲线相吻合的结果。可以看出该方法的有效性。  相似文献   

20.
Using CALIPSO (cloud-aerosol lidar and infrared pathfinder satellite observation) vertical observation data during haze periods from January 2007 to December 2008, we analyzed differences in aerosol characteristics near the surface, as well as in the middle troposphere between the Beijing–Tianjin–Hebei metropolitan region (Area A) and the Yangtze River Delta region (Area B) in China. One significant difference was that haze pollution in Area A was related to local and non-local aerosols, while in Area B it was related to local anthropogenic sources. In all seasons apart from autumn, aerosol pollution in Area A was more severe than in Area B, both near the surface and at higher altitudes. In Area A, non-spherical aerosols were dominant from 0 to 4 km in spring, summer, and winter; while in autumn, there were considerably high numbers of non-spherical aerosols below 0.5 km, and near-spherical aerosols from 0.5 to 4 km. In Area B, both near-spherical and non-spherical aerosols were common in all seasons. Moreover, aerosols with attenuated color ratios of 0–0.2 were more common in all seasons in Area A than in Area B, indicating that fine particle pollution in Area A was more serious than in Area B. Finally, relatively large aerosols linked to gravity settling appeared more frequently near the surface in Area A than in Area B.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号