Transient oscillatory and constantly accelerated non-Newtonian flow in a porous medium

This paper looks at the magnetohydrodynamic (MHD) analysis for transient flow of an Oldroyd-B fluid in a porous medium. The presented analysis takes into account the modified Darcy's law. The flow is induced due to constantly accelerated and oscillating plate. Expressions for the corresponding velocity field and the adequate tangential stress are determined by means of the Fourier sine transform. The influence of various parameters of interest on the velocity and tangential stress has been shown and discussed. A comparison for different kinds of fluids is also provided.     

Oscillating plate temperature effects on a flow past an infinite vertical porous plate with constant suction and embedded in a porous medium

 An approximate solution to the problem of flow of a viscous incompressible dissipative fluid past an infinite vertical porous plate embedded in a porous medium is presented here. The plate temperature is assumed to be oscillating about a constant mean temperature. Mean velocity and mean temperature, the transient velocity and temperature profiles are shown graphically. The mean skin-friction and the mean rate of heat transfer are also shown graphically. The expressions for the amplitude and the phase of the skin-friction and the rate of heat transfer are derived and their numerical values are listed in Tables. The effects of different parameters governing the unsteady flow are discussed. Received on 23 November 1998     

EXACT SOLUTIONS FOR MAGNETOHYDRODYNAMIC FLOW IN A ROTATING FLUID

An analytical solution is obtained for the flow due to solid-body rotations an oscillating porous disk and of a fluid at infinity. Neglecting the induced magnetic field, the effects of the transversely applied magnetic field on the flow are studied. Further, the flow confined between two disks is also discussed. It is found that an infinite number of solutions exist for the flow confined between two disks.     

Pressure drop and friction factor of steady and oscillating flows in open-cell porous media

Open-cell metal foams are often used in heat exchangers and absorption equipment because they exhibit large specific surface area and present tortuous coolant flow paths. However, published research works on the characteristics of fluid flow in metal foams are relatively scarce, especially for the flow oscillation condition. The present experimental investigation attempts to uncover the behavior of steady and oscillating flows through metal foams with a tetrakaidecahedron structure. In the experiments, steady flow was supplied by an auto-balance compressor and flow oscillation was provided by an oscillating flow generator. The pressure drop and velocity were measured by the differential pressure transducer and hot-wire sensor, respectively. The friction factor of steady flow in metal foam channel was analyzed through the permeability and inertia coefficient of the porous medium. The results show that flow resistance in the metal foams increases with increasing form coefficient and decreasing permeability. The empirical equation obtained by the present study indicates that the maximum friction factor of oscillating flow through the tested aluminum foams with specific structure is governed by the hydraulic ligament diameter-based kinetic Reynolds number and the dimensionless flow amplitude.     

The Opposing Effect of Viscous Dissipation Allows for a Parallel Free Convection Boundary-Layer Flow Along a Cold Vertical Flat Plate

External free convection boundary-layer flows are usually treated by neglecting the effect of viscous dissipation. This assumption always results in a non-parallel flow, besides a strong parallel component also a weak transversal component of the (steady) velocity field occurs. The present paper shows, however, that the weak opposing effect of the buoyancy forces due to heat release by viscous dissipation, can give rise along a cold vertical plate adjacent to a fluid saturated porous medium to a strictly parallel steady free convection flow. This boundary-layer flow is described by an algebraically decaying exact analytical solution of the basic balance equations.     

A note on unsteady unidirectional flows of a non-Newtonian fluid

Exact solutions are established for a class of unsteady unidirectional flows of an in compressible second grade fluid wherein inertial effects are not ignored. Amongst the several interesting flows which belong to this class are the flow due to a rigid plate oscillating in its own direction, the flow between two rigid boundaries one of which is suddenly started and the time-periodic Poiseuille flow due to an oscillating pressure gradient.     

New exact solutions of Stokes' second problem for an MHD second grade fluid in a porous space

We investigate a problem describing the oscillating flow of an incompressible magnetohydrodynamic (MHD) second grade fluid in a porous half space. Exact solutions for sine and cosine oscillations are developed by applying the Laplace transform method. The total obtained solution is a sum of steady and transient solutions. Particular attention is given to the effects of magnetic and porous medium parameters on the velocity. It is shown that previous results for a non-porous medium and hydrodynamic fluid are the limiting cases of the present problem. The results for velocity are plotted and discussed carefully.     

Unsteady hydromagnetic Couette flow through a porous medium in a rotating system

This paper investigates the unsteady hydromagnetic Couette fluid flow through a porous medium between two infinite horizontal plates induced by the non-torsional oscillations of one of the plates in a rotating system using boundary layer approximation. The fluid is assumed to be Newtonian and incompressible. Laplace transform technique is adopted to obtain a unified solution of the velocity fields. Such a flow model is of great interest, not only for its theoretical significance, but also for its wide applications to geophysics and engineering. Analytical expressions for the steady state velocity and shear stress on the plates are obtained, and the case of single oscillating plate is also discussed. The influence of pertinent parameters on the flow is delineated, and appropriate conclusions are drawn.     

Hydromagnetic oscillatory Couette flow in rotating system with induced magnetic field

This paper presents a study of hydromagnetic Couette flow of an incompress- ible and electrically conducting fluid between two parallel rotating plates, one of which is oscillating in its own plane. A uniform transverse magnetic field is used, and the induced magnetic field is taken into account. The exact solution to the governing equations is obtained in a closed form. The solution to the problem in the case of vanishing and small finite magnetic Prandtl numbers is also derived from the general solution. The asymp- totic behavior of the solution for large values of the frequency parameter is analyzed to gain some physical insights into the flow pattern. Expressions for the shear stress at both the oscillatory and stationary plates due to primary and secondary flows and mass flow rate in the primary and secondary flow directions are also obtained. The results of the fluid velocity and the induced magnetic field are presented. The shear stresses on the plates due to the primary and secondary flows and the corresponding mass flow rates are presented in a tabular form.     

The effect of magnetic fields on low frequency oscillating natural convection with pressure gradient

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｔｈｅｐｒｅｓｅｎｔｐａｐｅｒ,ａｃｏｍｐｕｔａｔｉｏｎａｌｓｔｕｄｙｏｆｔｈｅｅｆｆｅｃｔｏｆｍａｇｎｅｔｉｃｆｉｅｌｄｏｎｌｏｗｆｒｅｑｕｅｎｃｙｏｓｃｉｌｌａｔｉｎｇｎａｔｕｒａｌｃｏｎｖｅｃｔｉｏｎｗｉｔｈｐｒｅｓｓｕｒｅｇｒａｄｉｅｎｔｉｓｃａｒｒｉｅｄｏｕｔ.Ｔｈｅｒｅｈａｓｂｅｅｎａｒｅｃｅｎｔｉｎｔｅｒｅｓｔｉｎｅｘｐｌｏｒｉｎｇｔｈｅｍａｇｎｅｔｉｃｄａｍｐｉｎｇｅｆｆｅｃｔｓｔｏｓｕｐｅｒｉｍｐｏｓｅｏｖｅｒｍｉｃｒｏｇｒａｖｉｔｙｆｏｒａｆｕｒｔｈ…     

On two-dimensional laminar flows of a particulate suspension in the presence of gravity field

Three simple two-dimensional streaming motions of a mixture of solid particles with a continuous carrier fluid, or gas, in the presence of the gravity field are considered. These include flow of a mixture over an infinite stationary rigid plane perpendicular to the direction of the gravity field, flow near an oscillating rigid plane and flow in a mixture induced by a suddenly accelerated plane. The nature of the boundary conditions at the interface between a layer of sediment settling on the rigid boundary and the mixture above it suggests an introduction of the independent variables that enable simple analytical expressions for the solutions of the first two flows and a numerical solution by means of a Laplace transform in the last case.     

Unsteady flow of a fourth-grade fluid due to an oscillating plate

The governing non-linear high-order, sixth-order in space and third-order in time, differential equation is constructed for the unsteady flow of an incompressible conducting fourth-grade fluid in a semi-infinite domain. The unsteady flow is induced by a periodically oscillating two-dimensional infinite porous plate with suction/blowing, located in a uniform magnetic field. It is shown that by augmenting additional boundary conditions at infinity based on asymptotic structures and transforming the semi-infinite physical space to a bounded computational domain by means of a coordinate transformation, it is possible to obtain numerical solutions of the non-linear magnetohydrodynamic equation. In particular, due to the unsymmetry of the boundary conditions, in numerical simulations non-central difference schemes are constructed and employed to approximate the emerging higher-order spatial derivatives. Effects of material parameters, uniform suction or blowing past the porous plate, exerted magnetic field and oscillation frequency of the plate on the time-dependent flow, especially on the boundary layer structure near the plate, are numerically analysed and discussed. The flow behaviour of the fourth-grade non-Newtonian fluid is also compared with those of the Newtonian fluid.     

Radiation effect on forced convective flow and heat transfer over a porous plate in a porous medium

Heat transfer analysis has been presented for the boundary layer forced convective flow of an incompressible fluid past a plate embedded in a porous medium. The similarity solutions for the problem are obtained and the reduced nonlinear ordinary differential equations are solved numerically. In case of porous plate, fluid velocity increases for increasing values of suction parameter whereas due to injection, fluid velocity is noticed to decrease. The non-dimensional temperature increases with the increasing values of injection parameter. A novel result of this investigation is that the flow separation occurred due to suction/injection may be controlled by increasing the permeability parameter of the medium. The effect of thermal radiation on temperature field is also analyzed.     

Starting Darcy–Brinkman Flow in a Sector Duct Using the Method of Eigenfuction Superposition

The powerful method of eigenfunction superposition is applied to the starting flow in a sector duct filled with a porous medium. Using analytic eigenfunctions and eigenvalues of the Helmholtz equation, the solution can be expressed in a simple series. The properties of the velocity and the transient flow rate are found to depend on the sector geometry and a porous medium factor. The starting solution is then used to construct the solution to arbitrary unsteady flows.

     

Free-convection flow through an annular porous medium

This study addresses the Brinkman-extended Darcy model (Brinkman flow) of a laminar free-convective flow in an annular porous region. Closed form expressions for Velocity field, Temperature field, Skin-friction and Mass flow rate are given, under a thermal boundary condition of mixed kind at the outer surface of the inner cylinder while the inner surface of the outer cylinder is isothermal. The governing independent parameters are identified to be Darcy number (Da) and ratio of outer to inner radii (R). It is hoped that the study of such flows gives limiting conditions for developing flows and provides an analytical check on numerical solutions for more complex problems dealing with non-Darcian free-convection flow in an annular region.     

An Analysis of the Movement of Wetting and Nonwetting Fluids in Homogeneous Porous Media

The movement of wetting and nonwetting fluid flow in columns packed with glass beads is used to understand the more complicated flows in homogeneous porous media. The motion of two immiscible liquids (oil and water) is observed with different surfactants. Through dimensional analyses, fluid velocity is well correlated with interfacial tension and less dependent on particle size. In water–oil (W/O) experiments, finger pattern flows are observed if water is the displacing fluid that flows in an oil-filled porous media, whereas oil ganglia tend to form if oil is the displacing fluid in the water-wetted porous media. The results are well described by a simple model based on an earlier theory of flow in a tube.     

The PELskin project—part III: a homogenized model of flows over and through dense poroelastic media

In the context of the PELskin project, a homogenized model to study flows over and inside poroelastic media has been developed. It allows to simulate the fluid–structure interaction between a fluid and an extremely dense poroelastic medium, without limitations on physical and geometrical parameters such as the density of the elastic material, the porosity or the number of periodic microstructures which constitute the medium. The model is applied to the case of the flow in a channel driven by an oscillating pressure gradient, with half the channel covered by a carpet of flexible, densely packed fibers, connected to each other to allow for the propagation of the deformation field.     

Stokes flow past a porous spheroid embedded in another porous medium

A study is made with an analysis of an incompressible viscous fluid flow past a slightly deformed porous sphere embedded in another porous medium. The Brinkman equations for the flow inside and outside the deformed porous sphere in their stream function formulations are used. Explicit expressions are investigated for both the inside and outside flow fields to the first order in small parameter characterizing the deformation. The flow through the porous oblate spheroid embedded in another porous medium is considered as the particular example of the deformed porous sphere embedded in another porous medium. The drag experienced by porous oblate spheroid in another porous medium is also evaluated. The dependence of drag coefficient and dimensionless shearing stress on the permeability parameter, viscosity ratio and deformation parameter for the porous oblate spheroid is presented graphically and discussed. Previous well-known results are then also deduced from the present analysis.     

Effect of Time Periodic Boundary Conditions on Convective Flows in a Porous Square Enclosure with Non-Uniform Internal Heating

The problem of unsteady natural convection in a square region filled with a fluid-saturated porous medium having non-uniform internal heating and heated laterally is considered. The heated wall surface temperature varies sinusoidally with the time about fixed mean temperature. The opposite cold wall is maintained at a constant temperature. The top and bottom horizontal walls are kept adiabatic. The flow field is modelled with the Darcy model and is solved numerically using a finite difference method. The transient solutions obtained are all periodic in time. The effect of Rayleigh number, internal heating parameters, heating amplitude and oscillating frequency on the flow and temperature field as well as the total heat generated within the convective region are presented. It was found that strong internal heating can generate significant maximum fluid temperatures above the heated wall. The location of the maximum fluid temperature moves with time according to the periodically changing heated wall temperature. The augmentation of the space-averaged temperature in the cavity strongly depends on the heating amplitude and rather insensitive to the oscillating frequency.