复变量移动最小二乘法及其应用

提出了复变量移动最小二乘法，并详细讨论了基于正交基函数的复变量移动最小二乘 法. 然后，将复变量移动最小二乘法和弹性力学的边界无单元法结合，提出了弹性力学的复 变量边界无单元法，推导了相应的公式，并给出了数值算例. 基于正交基函数的复变量移动 最小二乘法的优点是不形成病态方程组、精度高，所形成的无网格方法计算量小. 复变量边 界无单元法是边界积分方程的无网格方法的直接列式法，容易引入边界条件，且具有更高的 精度.     

三维弹性动力学的改进的无单元Galerkin方法

基于改进的移动最小二乘法建立三维弹性动力学问题的形函数,结合三维弹性动力学的Galerkin积分弱形式,采用罚函数法施加位移边界条件,并引入隐式时间积分,建立了三维弹性动力学的改进的无单元Galerkin方法。该方法由于引入了改进的移动最小二乘法,避免了病态或奇异方程,在保证计算精度的同时提高了传统的无单元Galerkin方法的计算效率。最后通过数值算例对收敛性进行了分析,并证明了该方法比传统的无单元Galerkin方法计算效率提高了15%。     

用局部Petrov-Galerkin法分析薄板自由振动

利用薄板振型方程的等效积分弱形式和对振型函数采用移动最小二乘近似函数进行插值，本文进一步研究了无网格局部Petrov-Galerkin方法在薄板自由振动问题中的应用。它不需要任何形式的网格划分，所有的积分都在规则形状的子域及其边界上进行。在插值近似时，采用虚拟-实际节点值变换方法直接引入本质边界条件。通过数值算例和与其他方法的结果进行比较，表明无网格局部Petrov-Galerkin法求解弹性薄板自由振动问题具有收敛性好、精度高等一系列优点。     

弹性力学问题的局部边界积分方程方法

提出了弹性力学平面问题的局部边界积分方程方法。这种方法是一种无网格方法,它采用移动最小二乘近似试函数,且只包含中心在所考虑节点的局部边界上的边界积分。它易于施加本质边界条件。所得系统矩阵是一个带状稀疏矩阵。它组合了伽辽金有限元法、整体边界元法和无单元伽辽金法的优点。该方法可以容易推广到求解非线性问题以及非均匀介质的力学问题。计算了两个弹性力学平面问题的例子,给出了位移和能量的索波列夫模,所得计算结果证明：该方法是一种具有收敛快、精度高、简便有效的通用方法。     

无单元Galerkin法和边界元耦合法

无网格方法与有限元法或边界元法耦合是无网格方法处理边界条件的方法之一,在无网格方法中研究无网格方法与有限元法或边界元法耦合的研究显得非常重要.本文在无单元Galerkin法和边界元法的基础上,基于无单元Galerkin法子域和边界元法子域的界面上位移连续和面力平衡条件,提出了一种新的无单元Galerkin法和边界元法的直接耦合方法,对弹性力学问题详细推导了在整个求解域上的耦合公式.与以往的耦合法相比,这种方法简单直观,不需要增加新的耦合区域,也不需要建立新的逼近函数来保证界面位移的连续性.算例结果表明,该方法具有较好的计算精度.     

弹性静力问题的无网格弱-强形式结合法

基于改进的移动最小二乘(MLS)二阶导数近似,建立了一种求解弹性静力问题的无网格弱-强形式结合法(MLS-MWS)。该方法采用节点离散求解域,通过MLS构造形函数,将求解域划分为边界域和内部域,并分别使用控制方程的局部弱形式和强形式来建立离散系统方程。对强形式中涉及的近似函数二阶导数计算,提出了一种将其转化为求两次一阶导数的方法,与传统方法相比,该方法计算简单、精度高。MLS-MWS法结合了弱、强形式无网格法的优点,Neumann边界条件容易满足,并且只需在边界区域进行积分。文中应用该方法分析了两个弹性力学平面问题,分析结果表明本文方法具有良好的精度和收敛性。     

弹性力学的复变量无网格流形方法

为克服无网格流形方法配点过多、计算速度慢、容易形成病态方程组等缺点,将复变量移动最小二乘法与无网格流形方法相结合,提出了弹性力学的复变量无网格流形方法。分别采用线性基本与二次基进行计算,并与无网格流形方法相比。研究表明该方法计算量小、精度高。     

改进的移动最小二乘法

近年来发展的无网格方法大多采用移动员小二乘法来构造试函数，而应用移动最小二乘法形成的方程组有时会是病态的甚至奇异的，从而限制了它的发展和应用。本文采用带权正交函数作为基函数对移动最小二乘法做了改进，避免出现病态方程组，且在计算过程中不需要进行短阵求逆运算，提高了计算速度。之后，借鉴牛顿法、平衡法和摄动法对由移动最小二乘法得到的非线性代数方程组提出了新的求解方法。     

无网格局部强弱法求解不规则域问题

无网格局部彼得洛夫-伽辽金(meshless local Petrov-Galerkin,MLPG)法是一种具有代表性的无网格方法,在计算力学领域得到广泛应用.然而,这种方法在边界上需执行积分运算,通常很难处理不规则求解域问题.为了克服MLPG法的这种局限性,提出了无网格局部强弱(meshless local strong-weak,MLSW)法.MLSW法采用MLPG法离散内部求解域,采用无网格介点(meshless intervention-point,MIP)法施加自然边界条件,并采用配点法施加本质边界条件,避免执行边界积分运算,可适用于求解各类复杂的不规则域问题.从理论上讲,这种结合式方法,既保持了MLPG法稳定而精确计算的优势,同时兼备配点型方法在处理复杂结构问题时简洁而灵活的优势,实现了弱式法和强式法的优势互补.此外,MLSW法采用移动最小二乘核(moving least squares core,MLSc)近似法来构造形函数,是对传统移动最小二乘(moving least squares,MLS)近似法的一种改进.MLSc使用核基函数代替通常的基函数,有利于数值求解的精确性和稳定性,而且其导数近似计算变得更为简单.数值算例结果初步表明:这种新方法实施简单,求解稳定、精确,表现出适合工程运用的潜力.     

带源参数的二维热传导反问题的无网格方法

利用无网格有限点法求解带源参数的二维热传导反问题，推导了相应的离散方程. 与 其它基于网格的方法相比，有限点法采用移动最小二乘法构造形函数，只需要节点信息，不 需要划分网格，用配点法离散控制方程，可以直接施加边界条件，不需要在区域内部求积分. 用有限点法求解二维热传导反问题具有数值实现简单、计算量小、可以任意布置节点等优点. 最后通过算例验证了该方法的有效性.     

Analyzing the 2D fracture problems via the enriched boundary element-free method

In this paper, the enriched boundary element-free method for two-dimensional fracture problems is presented. An improved moving least-squares (IMLS) approximation, in which the orthogonal function system with a weight function is used as the basis function, is used to obtain the shape functions. The IMLS approximation has greater computational efficiency and precision than the existing moving least-squares (MLS) approximation, and does not lead to an ill-conditioned system of equations. Combining the boundary integral equation (BIE) method and the IMLS approximation, a boundary element-free method (BEFM), for two-dimensional fracture problems is obtained. For two-dimensional fracture problems, the enriched basis function is used at the tip of the crack, and then the enriched BEFM is presented. In comparison with other existing meshless boundary integral equation methods, the BEFM is a direct numerical method in which the basic unknown quantity is the real solution of the nodal variables, and the boundary conditions can be implemented easily, which leads to a greater computational precision. When the enriched BEFM is used, the singularity of the stresses at the tip of the crack can be shown better than that in the BEFM. For the purposes of demonstration, some selected numerical examples are solved using the enriched BEFM.     

势问题的重构核粒子边界无单元法

将重构核粒子法和势问题的边界积分方程方法结合,提出了势问题的重构核粒子边界无单元法. 推导了势问题的重构核粒子边界无单元法的公式,研究其数值积分方案,建立了重构核粒子边界无单元法的离散化边界积分方程,并推导了重构核粒子边界无单元法的内点位势的积分公式. 重构核粒子法形成的形函数具有重构核函数的光滑性,且能再现多项式在插值点的精确值,所以该方法具有更高的精度. 最后给出了数值算例,验证了所提方法的有效性和正确性. }      

断裂力学问题的杂交边界点方法

提出了一种求解断裂力学的新的边界类型无网格方法-杂交边界点法.以修正变分原理和移动最小二乘近似为基础,同时具有边界元法和无网格法的优良特性,求解时仅仅需要边界上离散点的信息.该文将杂交边界点方法应用到弹性断裂问题中,将移动最小二乘方法中的基函数扩充,能更好的模拟裂纹尖端应力场的奇异性,推导了求解断裂力学的杂交边界点法方程,与传统的元网格方法相比,文中方法具有后处理简单,计算精度高的优点.数值算例表明了该方法的稳定性和有效性.     

局部彼得洛夫-伽辽金法分析各向异性板屈曲

基于Kirchhoff板理论和对挠度函数采用移动最小二乘近似函数进行插值，进一步研究无网格局部Petrov-Galerkin(MLPG)方法在各向异性板稳定问题中的应用．分析中，本质边界条件采用罚因子法施加，离散的特征值方程由板稳定控制方程的局部积分对称弱形式中得到．通过数值算例并与其他方法的结果进行比较，表明MLPG法求解各向异性薄板稳定问题具有收敛性好、精度高等一系列优点．     

A meshless method of a thin plate

A meshless approach to analysis of arbitrary Kirchhoff plates by the local boundary integral equation(LBIE) method is presented. The method combines the advantageous features of, all the three methods: the Galerkin finite element method (GFEM), the boundary element method (BEM) and the element-free Galerkin method (EFGM). It is a truly meshless method, which means that the discretization is independent of geometric subdivision into elements or cells, but is only based on a set of nodes (ordered or scattered) over a domain in question. It involves only boundary integration, however, over a local boundary centered at the node in question; It poses no difficulties in satisfying the essential boundary conditions while leading to banded and sparse system matrices using the moving least square (MLS) approximations. It is shown that high accuracy can be achieved for arbitrary geometries for clamped and simply-supported edge conditions. The method is found to be simple, efficient, and attractive. Project supported by the National Science Foundation of China (No. 19972019).     

Meshless acoustic analysis using a weakly singular Burton-Miller boundary integral formulation

The Burton-Miller boundary integral formulation is solved by a complex variable boundary element-free method (CVBEFM) for the boundary-only meshless analysis of acoustic problems with arbitrary wavenumbers. To regularize both strongly singular and hypersingular integrals and to avoid the computation of the solid angle and its normal derivative, a weakly singular Burton-Miller formulation is derived by considering the normal derivative of the solid angle and adopting the singularity subtraction procedures. To facilitate the implementation of the CVBEFM and the approximation of gradients of the boundary variables, a stabilized complex variable moving least-square approximation is selected in the meshless discretization procedure. The results show the accuracy and efficiency of the present CVBEFM and reveal that the method can produce satisfactory results for all wavenumbers, even for extremely large wavenumbers such as k = 10 000.     

Application of the Local Boundary Integral Equation Method to Boundary-Value Problems

A review of the meshless formulations based on local boundary integral equation (LBIE) methods is presented. Physical quantities are approximated by the moving least-squares method. A summary of recent developments in the application of the LBIE method to potential problems, elastostatics, elastodynamics, thermoelasticity, and plate bending problems is given. The efficiency and generality of the present formulation in a wide class of engineering problems are confirmed.     

Meshless Galerkin analysis of Stokes slip flow with boundary integral equations

This paper presents a novel meshless Galerkin scheme for modeling incompressible slip Stokes flows in 2D. The boundary value problem is reformulated as boundary integral equations of the first kind which is then converted into an equivalent variational problem with constraint. We introduce a Lagrangian multiplier to incorporate the constraint and apply the moving least‐squares approximations to generate trial and test functions. In this boundary‐type meshless method, boundary conditions can be implemented exactly and system matrices are symmetric. Unlike the domain‐type method, this Galerkin scheme requires only a nodal structure on the bounding surface of a body for approximation of boundary unknowns. The convergence and abstract error estimates of this new approach are given. Numerical examples are also presented to show the efficiency of the method. Copyright © 2009 John Wiley & Sons, Ltd.