Effet dispersif de la loi d'Exner menant à l'équation de Benjamin–Ono : ondulations d'un sol meubleExner's law dispersive effects leading to Benjamin–Ono equation: waves over an erodible bed

The flow over an erodible bed is revisited supposing that the flux of sediments is proportional to the slip velocity of the potential flow. This gives a linear Benjamin–Ono equation which is numerically solved, this solution is favorably compared to a selfsimilar approached solution. To cite this article: P.-Y. Lagrée et al., C. R. Mecanique 331 (2003).     

On particle–particle interactions in solid,non-conducting impurity removalSur l'interaction particule–particule lors de l'extraction d'impuretés solides isolantes

A whole boundary-integral formulation is proposed to determine the rigid-body motions of two solid and insulating particles, freely-suspended in a metal liquid and subject to uniform ambient electric and magnetic fields. As revealed by our numerical results, particle–particle interactions may become significant for close enough bodies. To cite this article: A. Sellier, C. R. Mecanique 331 (2003).     

Instabilité et particularités de l'évolution d'une nappe tourbillonnaireInstability and features of vortex sheet evolution

The instability and the features of vortex sheet evolution are studied. We consider the self-organization of localized vortices (in two-dimensional flows) into clusters-like and spiral-like structures and show that quasi-final states do not ‘forget’ conditions of their initial origin. We discuss the physical significance of the obtained results. To cite this article: V. Pavlov et al., C. R. Mecanique 330 (2002) 757–762.     

Effet de l'orientation d'un champ magnétique horizontal sur la stabilité de l'écoulement de HadleyEffet of the orientation of a horizontal magnetic field on the stability of Hadley flow

A numerical study based on the linear stability analysis is undertaken, in order to determine the influence of a horizontal magnetic field on the marginal modes occuring in a fluid layer subjected to a horizontal temperature gradient. A particular interest is devoted to the influence of the magnetic field orientation on both nature and critical values of the unstable modes. Calculations show, that when it is subjected to such a magnetic field, this type of flow, known as Hadley flow, can present oblique waves, hitherto non-existent when no magnetic field is applied and even when a vertical, a transverse or a longitudinal magnetic field is imposed. A new asymptotic behavior is also observed for the stabilizing effects. To cite this article: S. Kaddeche et al., C. R. Mecanique 331 (2003).     

Stress equivalence principle for saturated porous mediaPrincipe d'équivalence en contrainte pour milieux poreux saturés

The stress equivalence principle for saturated porous media is studied in the plastic domain using a homogenization approach. The skeleton is composed of a micro-isotropic and micro-homogeneous material. The stress localization law in saturated porous media is first obtained. This makes it possible to define an appropriate effective stress tensor in the sense of the stress equivalence principle. The form of the effective stress tensor is examined for two particular yield functions of skeleton material. To cite this article: D. Lydzba, J.-F. Shao, C. R. Mecanique 330 (2002) 297–303.     

Homogenization of an elastic medium reinforced by anisotropic fibersHomogénéisation d'un milieu élastique renforcé par des fibres anisotropes

We present results in this Note concerning a vector version in the framework of linearized elasticity (see A. Sili, Homogenization of an elastic medium reinforced by anisotropic fibers, in press), of our previous work in which we have studied the homogenization of a scalar nonlinear monotone problem posed on a fibered medium (see A. Sili, Homogenization of a nonlinear monotone problem in an anisotropic medium, in press). Here, we assume that parallel elastic anisotropic fibers, periodically distributed with a period of size ε in a cube $\text{Ω}$, are surrounded by a soft elastic material, the elasticity coefficients of this material being in the ratio ε² with those of the fibers. We prove that the homogenized problem is nonlocal and involves variables linked together with the anisotropy of the fibers. To cite this article: A. Sili, C. R. Mecanique 331 (2003).     

Characterization of the flow for a single fluid in an excavation damaged zoneCaractérisation de l'écoulement d'un fluide monophasique en zone endommagée

The aim of this Note is to quantify the change of characteristics of the media of an Excavated Damaged Zone (EDZ) affected by several fractures. For this, we consider Darcy flow through matrix blocks and fractures with permeability of order ε²δ^θ and 1 respectively. ε is the size of a typical porous block, δ representing the relative size of the fracture and θ is a parameter characterising the permeability ratio. We derive the global behavior from the limit as ε and δ tend to zero. The resulting homogenized equation is of dual-porosity type for θ=2, but it is a simple-porosity model with effective coefficients for θ>2, and there is no flow at the macroscopic level when 0<θ<2. To cite this article: B. Amaziane et al., C. R. Mecanique 332 (2004).     

Instabilités à l'interface entre fluides miscibles par forçage oscillant horizontalInstabilities at the interface between miscible fluids under a horizontal oscillating forcing

Experiments were performed in order to study the instability at the interface between miscible fluids placed in a closed tank when submitted to a horizontal and sinusoidal oscillating forcing. For a given amplitude a, the frequency f was progressively increased untill a threshold frequency above which a stationnary relief can be observed in the reference frame of the tank. The difference of density involves an oscillating shear which lead to a Kelvin–Helmholtz type instability. An experimental stability curve was determined and confirms the physical mecanism. The capillar effects which could be expected at the interface between such fluids can be neglicted. To cite this article: M. Legendre et al., C. R. Mecanique 331 (2003).     

Artificial boundary conditions on polyhedral truncation surfaces for three-dimensional elasticity systemsConditions aux limites artificielles sur des surfaces polyhédrales de troncature pour des systèmes d'élasticité tridimensionalle

For a three-dimensional exterior problem in the framework of anisotropic elasticity, artificial boundary conditions are constructed on a polyhedral truncation surface. These conditions do not need an explicit formula for the fundamental matrix. An approach to adapt the shape of truncation surfaces to the shape of the enclosed cavity is discussed. To cite this article: S. Langer et al., C. R. Mecanique 332 (2004).     

Chargements axisymétriques d'un bicouche transversalement isotropeAxisymmetric loading on a transversely isotropic two-layered medium

An exact three-dimensional analysis is developped for an axisymmetric loading acting on the surface of a semi-infinite medium composed by two transversely isotropic materials. The loading is assumed to be parallel to the elastic symmetry axis of the upper layer. The solutions of a concentrated force and a uniform loading distributed on a circle are obtained by exact integral expressions. The numerical results are performed to show the anisotropic effect with isovalue curves of stress. To cite this article: C. Ruimy, M. Dahan, C. R. Mecanique 330 (2002) 469–473.     

On the stability of a Bingham fluid flow in an annular channelSur la stabilité de l'écoulement d'un fluide de Bingham dans une conduite annulaire

Linear stability of a fully developed Bingham fluid flow between two coaxial cylinders subject to infinitesimal axisymetric perturbations is investigated. The analysis leads to two uncoupled Orr–Sommerfeld equations with appropriate boundary conditions. The numerical solution is obtained using fourth order finite difference scheme. The computations were performed for various plug flow dimensions and radii ratios. Within the range of the parameters considered in this paper, the Poiseuille flow of Bingham fluid is found to be linearly stable. To cite this article: N. Kabouya, C. Nouar, C. R. Mecanique 331 (2003).     

On the optimization of higher eigenvaluesSur l'optimisation de valeurs propres supérieures

A new approach is proposed for the study of the classical Lagrange problem on the optimal form of a column with clamped ends and a fixed volume. It is proved that there exists a column with the maximal possible value of the kth eigenvalue and that such a column is unique. A method for the numerical solution is proposed. The method is based on the analysis of the critical points of a non-linear functional related to the Lagrange problem. To cite this article: Y.V. Egorov, C. R. Mecanique 332 (2004).     

Modélisation thermodynamique du frottement interne et de l'hystérésis d'un élastomèreThermodynamics modelling of internal friction and hysteresis of elastomers

The study of the physical structure of filled elastomers makes us able to identify the state variables needed to model the behavior of elastomeric materials. We build a thermodynamics potential (written for finite strains and in 3D) which accounts for the nonlinearity of the behavior, for a hysteresis independent of the time and of the loading rate and for Mullins effect, this without introducing damage. The model can be coupled with damage to predict the crack initiation conditions under monotonic and/or cyclic loading. To cite this article: S. Cantournet, R. Desmorat, C. R. Mecanique 331 (2003).     

Asymptotics at infinity of solutions to the Neumann problem in a sieve-type layerComportement asymptotique à l'infini d'un problème de Neumann dans une couche perforée

The Neumann problem is considered in a domain $\text{Ω}$, which can differ from a periodic layer inside a compact set. We prove the Fredholm property of the corresponding operator in step-weighted Sobolev spaces and determine its kernel and cokernel. All these results are based on the obtained asymptotic representation of solutions at infinity. To cite this article: S.A. Nazarov, G. Thäter, C. R. Mecanique 331 (2003).     

Experimental observation of the straining field responsible for vortex ring instabilityObservation expérimentale du champ responsable de l'instabilité du tourbillon torique

The aim of this work is to show experimentally the straining field responsible for the vortex ring instability. To do so, the velocity field in the neighbourhood of the core is measured with Particle Image Velocimetry. This field is compared with the one coming from theoretical work on a thin vortex ring in an ideal fluid. Theoretical and experimental data fit well. This indicates that the linear phase of the instability is weakly influenced by viscosity. To cite this article: A. Dazin et al., C. R. Mecanique 332 (2004).     

An advanced design method for propellers behind bodies of revolutionCalcul de l'hélice fonctionnant en arrière d'un corps à symétrie axiale

The flow around the unshrouded marine propellers operating in the wake of an axisymmetric body is rotational and tridimensional. An inverse method based on the model of inviscid and rotational fluid and coupling two complementary steps (axisymmetric computation + 3D panel method) is proposed for the design of the marine propellers. The meridional flow computation leads to the determination of axisymmetrical stream sheets as well as the approximate camber surface of the blades and gives a good estimation of the surface of the free vortex wake. The new aspects developed in this method are the involvement of the contraction and the stretching of the free vortex wake, the rotational character of the incoming flow in the axisymmetric computation with tridimensional effects due to 3D panel method. To cite this article: N. Settou, B. Viney, C. R. Mecanique 331 (2003).     

Matrix-fracture exchange in a fractured porous medium: stochastic upscalingCoefficient d'échange matrice-fracture en milieu poreux fracturé : changement d'échelle par approche stochastique

We present in this Note a stochastic approach to the matrix-fracture exchange in a heterogeneous fractured porous medium. We introduce an intermediate scale, called the unit-scale, between the local-scale (fracture-scale) and the large-scale characteristic of the reservoir mesh (reservoir block). This paper focuses on the problem of upscaling fluid exchange phenomena from the unit scale to the reservoir mesh or block scale. Simplifying the Darcian flow terms enables us to obtain a probabilistic solution of the dual continuum problem, in continuous time, in the case of a purely random exchange coefficient. This is then used to develop several upscaling approaches to the fluid exchange problem, and to analyze the so-called ‘effective’ exchange coefficient. The results are a first contribution to the more general problem of upscaling multidimensional flow-exchange processes in space and time, in randomly heterogeneous dual continua. To cite this article: M. Kfoury et al., C. R. Mecanique 332 (2004).     

Self adjoint extensions of differential operators in application to shape optimizationExtensions autoadjointes d'opérateurs différentiels et application à l'optimisation de forme

Two approaches are proposed for the modelling of problems with small geometrical defects. The first approach is based on the theory of self adjoint extensions of differential operators. In the second approach function spaces with separated asymptotics and point asymptotic conditions are introduced, and the variational formulation is established. For both approaches the accuracy estimates are derived. Finally, the spectral problems are considered and the error estimates for eigenvalues are given. To cite this article: S.A. Nazarov, J. Sokolowski, C. R. Mecanique 331 (2003).     

Effects of conductivity jumps in the envelope of a kinematic dynamo flowInfluence des discontinuités de conductivité dans l'enveloppe de l'écoulement d'une dynamo cinématique

This Note reports on numerical simulations of the kinematic dynamo action in a test flow modeling the Von Kármán Sodium (VKS) experiment performed at CEA-Cadarache. We show that the conductivity of the vessel greatly influences the critical magnetic Reynolds number. These effects are dramatically amplified as the ratio of the conductivity of the vessel to that of the sodium increases from 1 to 5. To cite this article: R. Laguerre et al., C. R. Mecanique 334 (2006).     

Instabilités de l'écoulement produisant le bruit de fenteFlow instabilities producing the slot-tone

The nature of the instability governing the self-sustained tones produced by a low Mach number plane jet impinging on a slotted plate, known as slot-tone, is identified experimentally. For a given Reynolds number, the natural shear-layer and the jet column mode frequencies of the free jet delimit the values of the measured slot-tone operating frequencies. The oscillations at lower frequencies are the result of the amplification of the jet column mode, and those at higher frequencies correspond to the shear layer instabilities. To cite this article: A. Billon et al., C. R. Mecanique 332 (2004).