Exact analytic solutions of three-dimensional boundary-value problems of the statics of a transversely isotropic body of canonical form (Survey)

Conclusion Thus, we have described some of the approaches used to solve three-dimensional problems of the statics of isotropic and transversely isotropic bodies, and we have systematized results from the construction of analytic general solutions to problems of the theory of elasticity of transversely isotropic bodies of canonical form. These solutions have in turn been used to solve numerous specific problems on stress concentration near notches, cavities, inclusions, and cracks, as well as problems concerning the contact interaction of an elastic half-space with elliptical and parabolic dies. Translated from Prikladnaya Mekhanika, Vol. 33, No. 10, pp. 3–30, October, 1997.     

Influence of a thin isotropic coating on the edge effect zone in isotropic and transversely isotropic materials

The effect of a thin isotropic coating on the edge effect zone in a representative element of a coated material is examined. Isotropic and transversely isotropic materials are considered. The transversely isotropic material has the elastic properties of unidirectional glass-fiber-reinforced plastic. The decay of the edge effect in the directions perpendicular to the coating plane and to the plane of isotropy is studied. A boundary-value problem of elasticity for piecewise-homogeneouse orthotropic bodies and a quantitative edge effect decay criterion for normal stresses are used as a design model. The problem is solved using the finite-difference method and base schemes. The results of evaluation of the edge effect zone in homogeneous and inhomogeneous materials are presented. It is shown that the presence of a thin isotropic coating blocks the edge effect, that is, decreases the edge effect zone in both isotropic and transversely isotropic materials __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 12, pp. 61–67, December 2007.     

Stationary heat conduction in a macro- and microperiodically layered solid

Summary This paper deals with the stationary heat conduction in a solid consisting of planar, isotropic or transversely isotropic layers. The following cases are considered: (1) arbitrarily layered solid, (2) macroperiodically layered solid, consisting of equal pairs of different basic layers with finite thicknesses, (3) microperiodically layered solid, consisting of equal layer groups of two or more different basic layers of infinitesimal thicknesses. Assuming a perfect contact between the layers, exact solutions for the plane, the axisymmetric and the general three-dimensional problem of macro- and microperiodically layered semispaces, respectively, are derived using integral transforms and the transfer-matrix method. It is proved that the microperiodically layered solid with isotropic or transversely isotropic basic layers is equivalent to a homogeneous transversely isotropic solid. Received 31 March 1999; accepted for publication 21 May 1999     

Indentation of a smooth axisymmetric punch into a transversely isotropic layer

We consider an axisymmetric contact problem for a transversely isotropic layer on a rigid base. The problem is reduced to a Fredholm integro-differential equation of the first kind for the contact pressure under the punch. The integral equation is solved by the collocation method [1]. Some numerical results are presented.     

Contact interaction of two compressed electroelastic half-spaces

The contact interaction of two compressed electroelastic transversely isotropic half-spaces with different properties is studied. One of the half-spaces has an axisymmetric notch of special shape. The contact plane coincides with the plane of isotropy of the half-spaces. Explicit formulas for the contact pressure, displacements, and the size of the gap between piezoelectric half-spaces are derived. These contact characteristics for transversely isotropic and isotropic elastic half-spaces are obtained as special cases     

Orientation-dependent adhesion strength of a rigid cylinder in non-slipping contact with a transversely isotropic half-space

Recently, Chen and Gao [Chen, S., Gao, H., 2007. Bio-inspired mechanics of reversible adhesion: orientation-dependent adhesion strength for non-slipping adhesive contact with transversely isotropic elastic materials. J. Mech. Phys. solids 55, 1001–1015] studied the problem of a rigid cylinder in non-slipping adhesive contact with a transversely isotropic solid subjected to an inclined pulling force. An implicit assumption made in their study was that the contact region remains symmetric with respect to the center of the cylinder. This assumption is, however, not self-consistent because the resulting energy release rates at two contact edges, which are supposed to be identical, actually differ from each other. Here we revisit the original problem of Chen and Gao and derive the correct solution by removing this problematic assumption. The corrected solution provides a proper insight into the concept of orientation-dependent adhesion strength in anisotropic elastic solids.     

The elliptical Hertzian contact of transversely isotropic magnetoelectroelastic bodies

First, the general solution for transversely isotropic magnetoelectroelastic media is given concisely in form of five harmonic functions. Second, the extended Boussinesq and Cerruti solutions for the magnetoelectroelastic half-space are obtained in terms of elementary functions by utilizing this general solution. Third, the coupled fields for elliptical Hertzian contact of magnetoelectroelastic bodies are solved in smooth and frictional cases. At last, the graphic results are presented.     

Thermoelastic State of a Transversely Isotropic Layer between Two Annular Punches

A technique is developed to solve contact problems for annular punches interacting with a transversely isotropic layer. The contact problem for two heated annular punches interacting with a layer is solved. The formulas for the contact stresses under the punches are derived, and the effect of the shape of the punches on the magnitude and distribution of these stresses is analyzed     

The contact problem for a class of orthotropic elastic solids

The contact problem between two orthotropic solids is examined. The problem is solved by using Lodge's method, which permits the transformation of the boundary-value problem of an anisotropic solid to a form identical with the corresponding problem of an isotropic medium. The proposed solution is then compared with known results of certain cases and it is observed that it producesHertz's solution when used for an isotropic case,Lodge's solution when applied to contact between an orthotropic solid and a rigid plane and, finally,Love's solution if the solid is transversely isotropic with the axis of material symmetry perpendicular to the rigid plane of contact.     

Indentation of a Rigid Sphere into an Elastic Half-Space in the Direction Orthogonal to the Axis of Material Symmetry

In this work a contact problem for a transversely isotropic half-space indented by a rigid sphere is considered. The axis of symmetry of the half-space is orthogonal to the axis of the applied contact load, which makes the problem fully three-dimensional. An exact solution to this contact problem is constructed. Stresses and strains are obtained in the form of contour integrals in the complex plane with explicitly determined dimensionless integrands. As an illustrative application of the constructed solution, failure beneath the indenter in a unidirectional composite is analyzed.     

Non-slipping JKR model for transversely isotropic materials

A generalized plane strain JKR model is established for non-slipping adhesive contact between an elastic transversely isotropic cylinder and a dissimilar elastic transversely isotropic half plane, in which a pulling force acts on the cylinder with the pulling direction at an angle inclined to the contact interface. Full-coupled solutions are obtained through the Griffith energy balance between elastic and surface energies. The analysis shows that, for a special case, i.e., the direction of pulling normal to the contact interface, the full-coupled solution can be approximated by a non-oscillatory one, in which the critical pull-off force, pull-off contact half-width and adhesion strength can be expressed explicitly. For the other cases, i.e., the direction of pulling inclined to the contact interface, tangential tractions have significant effects on the pull-off process, it should be described by an exact full-coupled solution. The elastic anisotropy leads to an orientation-dependent pull-off force and adhesion strength. This study could not only supply an exact solution to the generalized JKR model of transversely isotropic materials, but also suggest a reversible adhesion sensor designed by transversely isotropic materials, such as PZT or fiber-reinforced materials with parallel fibers.     

Application of generalized images method to contact problems for a transversely isotropic elastic layer on a smooth half-space

The idea, first used by the author for the case of crack problems, is applied here to solve a contact problem for a transversely isotropic elastic layer resting on a smooth elastic half-space, made of a different transversely isotropic material. A rigid punch of arbitrary shape is pressed against the layer’s free surface. The governing integral equation is derived; it is mathematically equivalent to that of an electrostatic problem of an infinite row of coaxial charged disks in the shape of the domain of contact. The case of circular domain of contact is considered in detail. As a comparison, the method of integral transforms is also used to solve the problem. The main difference of our integral transform approach with the existing ones is in separating of our half-space solution from the integral transform terms. It is shown that both methods lead to the same results, thus giving a new interpretation to the integral transform as a sum of an infinite series of generalized images.     

Exact Analytical Solutions of Static Electroelastic and Thermoelectroelastic Problems for a Transversely Isotropic Body in Curvilinear Coordinate Systems

An approach to the solution of three-dimensional static problems for a transversely isotropic (rectilinear anisotropy) body is expounded and the solutions for piezoceramic canonical bodies are systematized. The result of the study is explicit analytical solutions of three-dimensional problems. Bodies are examined whose boundary surface is the coordinate surfaces in coordinate systems that permit the separation of the variables in the three-dimensional Laplace equation. The stress concentration in bodies near necks, cavities, inclusions, and cracks is investigated. The stress intensity factors of the force field and electric induction near elliptic and parabolic cracks are determined. The contact interaction of a piezoceramic half-space with elliptic and parabolic dies is studied. The bodies are under various mechanical, thermal, and electric loads     

Non-axisymmetrical vibration of elastic circular plate on layered transversely isotropic saturated ground

The non-axisymmetrical vibration of elastic circular plate resting on a layered transversely isotropic saturated ground was studied.First,the 3-d dynamic equations in cylindrical coordinate for transversely isotropic saturated soils were transformed into a group of governing differential equations with 1-order by the technique of Fourier ex- panding with respect to azimuth,and the state equation is established by Hankel integral transform method,furthermore the transfer matrixes within layered media are derived based on the solutions of the state equation.Secondly,by the transfer matrixes,the general solutions of dynamic response for layered transversely isotropic saturated ground excited by an arbitrary harmonic force were established under the boundary conditions, drainage conditions on the surface of.ground as well as the contact conditions.Thirdly, the problem was led to a pair of dual integral equations describing the mixed boundary- value problem which can be reduced to the Fredholm integral equations of the second kind solved by numerical procedure easily.At the end of this paper,a numerical result concerning vertical and radical displacements both the surface of saturated ground and plate is evaluated.     

Interaction of a die with a layered elastic foundation

Plane and axisymmetric contact problems for a three-layer elastic half-space are considered. The plane problem is reduced to a singular integral equation of the first kind whose approximate solution is obtained by a modified Multhopp-Kalandiya method of collocation. The axisymmetric problem is reduced to an integral Fredholm equation of the second kind whose approximate solution is obtained by a specially developed method of collocation over the nodes of the Legendre polynomial. An axisymmetric contact problem for an transversely isotropic layer completely adherent to an elastic isotropic half-space is also considered. Examples of calculating the characteristic integral quantities are given. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 3, pp. 165–175, May–June, 2006.     

The rotation of a rigid elliptical disc inclusion embedded in a transversely isotropic elastic solid

This paper examines the problem of asymmetric rotation of a rigid elliptical disc inclusion embedded in bonded contact with a transversely isotropic elastic solid of infinite extent. The moment-rotation relationship for the embedded inclusion is evaluated in explicit closed form.     

Stresses in a long hollow cylindrically aeolotropic circular cylinder with plane ends subjected to surface forces

In this paper the stress distribution at a point in a long hollow cylindrically aeolotropic circular cylinder whose plane ends are subjected to systems of forces each of which is statically equivalent to a couple and a longitudinal force, and whose curved surface is subjected to a uniform normal pressure has been studied. The solution of this static mixed Saint-Venant type problem provides results from which the corresponding results of isotropic, transversely isotropic circular cylindrical bodies can be readily deduced. In the end a simple practical application has been made with regard to a similar problem of a long hollow wood pole made up of species walnut.     

A general solution and the application of space axisymmetric problem in piezoelectric material

ＡＧＥＮＥＲＡＬＳＯＬＵＴＩＯＮＡＮＤＴＨＥＡＰＰＬＩＣＡＴＩＯＮＯＦＳＰＡＣＥＡＸＩＳＹＭＭＥＴＲＩＣＰＲＯＢＬＥＭＩＮＰＩＥＺＯＥＬＥＣＴＲＩＣＭＡＴＥＲＩＡＬＷａｎｇＺｉ－ｋｕｎｇ（王子昆）ＣｈｅｎＧｅｎｇ－ｃｈａｏ（陈庚超）（ＸｉａｎＪｉａｏ...     

Modeling of forming of wing panels of the SSJ-100 aircraft

Problems of inelastic straining of three-dimensional bodies with large displacements and turns are considered. In addition to the sought fields, surface forces and boundary displacements have also to be determined in these problems. Experimental justification is given to the proposed constitutive equations of steady creep for transversely isotropic materials with different characteristics under tension and compression. Algorithms and results of the finite-element solution of the problem are presented for these materials.     

An asymptotic model of a multimaterial with a thin piezoeletric interphase

We study the electromechanical behavior of a multimaterial constituted by a linear piezoelectric transversely isotropic plate-like body with high rigidity embedded between two generic three-dimensional piezoelectric bodies by means of the asymptotic expansion method. After defining a small real dimensionless parameter ε, which will tend to zero, we characterize the limit model and the associated limit problem. Moreover, we identify the non-classical electromechanical transmission conditions between the two three-dimensional bodies.