Injection of ideal fluid from a slot into a free stream

A cold gas is injected from a slot into a free stream of hot gas. In a simple model this leads to a two-fluid free boundary problem with the jump relation |u^-|²–|u⁺|² = ( constant) on the free boundary {u=0}, where u is the stream function. We prove that for any (–1, ) there exists a unique solution (Q, u) where Q is the flux of the injected fluid. Various properties of the solution u and of the free boundary are established.     

Determination of the distributed parameters of a lossless wave supporting system from boundary measurements

A lossless wave supporting system is modelled by two linear partial differential equations with variable coefficients(x) and(x),x0, which represent the distributed parameters of the system. The problem of determining(x) and(x) from measurements performed at the boundaryx=0 is considered. It is shown that generally it is only possible to determine an impedance function (), where and depend on and. If some additional relationship is known between and, however, it may be possible to fully determine these parameters. This is the case if, for example, it is known that the wave speed is constant. The results are interpreted for sample cases from solid mechanics, fluid mechanics, acoustics, and electromagnetic theory, and solutions are given of specific problems. The paper generalizes work on determination of vocal tract shapes from acoustical measurements made at the lips.     

Existence of fast traveling waves for some parabolic equations: A dynamical systems approach

We study semilinear elliptic equationsu + cu _x =f(u,u) and ² u + cu _x =f(u,u, ² u) in infinite cylinders (x,y) × ⁿ⁺¹ using methods from dynamical systems theory. We construct invariant manifolds, which contain the set of bounded solutions and then study a singular limitc, where the equations change type from elliptic to parabolic. In particular we show that on the invariant manifolds, the elliptic equation generates a smooth dynamical system, which converges to the dynamical system generated by the parabolic limit equation. Our results imply the existence of fast traveling waves for equations like a viscous reactive 2d-Burgers equation or the Cahn-Hillard equation in infinite strips.     

Upper and Lower Bounds for the Kolmogorov Entropy of the Attractor for the RDE in an Unbounded Domain

The long-time behaviour of bounded solutions of a reaction-diffusion system in an unbounded domain ⁿ , for which the nonlinearity f(u, _x u) explicitly depends on _x u is studied. We prove the existence of a global attractor, fractal dimension of which is infinite, and give upper and lower bounds for the Kolmogorov entropy of the attractor and analyze the sharpness of these bounds.     

Chaos and integrability in a nonlinear wave equation

We consider the parametrized family of equations _tt ,u- _xx u-au+u ₂ ² u=O,x(0,L), with Dirichlet boundary conditions. This equation has finite-dimensional invariant manifolds of solutions. Studying the reduced equation to a four-dimensional manifold, we prove the existence of transversal homoclinic orbits to periodic solutions and of invariant sets with chaotic dynamics, provided that =2, 3, 4,.... For =1 we prove the existence of infinitely many first integrals pairwise in involution.     

Green's functions,bi-linear forms,and completeness of the eigenfunctions for the elastostatic strip and wedge

The bi-harmonic Green's functionG(r,r) for the infinite strip region -1y1, -<x<, with the boundary conditionsG=G/y ony=±1, is obtained in integral form. It is shown thatG has an elegant bi-linear series representation in terms of the (Papkovich-Fadle) eigenfunctions for the strip. This representation is then used to show that any function bi-harmonic in arectangle, and satisfying the same boundary conditions asG, has a unique representation in the rectangle as an infinite sum of these eigenfunctions. For the case of the semi-infinite strip, we investigate conditions on sufficient to ensure that is exponentially small asx. In particular it is proved that this is so, solely under the condition that be bounded asx.A corresponding pattern of results is established for the wedge of general angle. The Green's function is obtained in integral form and expressed as a bilinear series of the (Williams) eigenfunctions. These eigenfunctions are proved to be complete for all functions bi-harmonic in anannular sector (and satisfying the same boundary conditions as the Green's function). As an application it is proved that if an elastostatic field exists in a corner region with free-free boundaries, and with either (i) the total strain energy bounded, or (ii) the displacement field bounded, then this field has a unique representation as a sum of those Williams eigenfunctions whichindividually posess the properties (i), (ii).The methods used here extend to all other linear homogeneous boundary conditions for these geometries.On leave of absence at the University of British Columbia, Vancouver, B.C. Canada, during 1977–79. This work was supported in part by N.R.C. grants Nos. A9259 and A9117.     

On Perturbative Expansions to the Stochastic Flow Problem

When analyzing stochastic steady flow, the hydraulic conductivity naturally appears logarithmically. Often the log conductivity is represented as the sum of an average plus a stochastic fluctuation. To make the problem tractable, the log conductivity fluctuation, f, about the mean log conductivity, lnK _G, is assumed to have finite variance, _f ². Historically, perturbation schemes have involved the assumption that _f ²<1. Here it is shown that _f may not be the most judicious choice of perturbation parameters for steady flow. Instead, we posit that the variance of the gradient of the conductivity fluctuation, _f ², is more appropriate hoice. By solving the problem withthis parameter and studying the solution, this conjecture can be refined and an even more appropriate perturbation parameter, , defined. Since the processes f and f can often be considered independent, further assumptions on f are necessary. In particular, when the two point correlation function for the conductivity is assumed to be exponential or Gaussian, it is possible to estimate the magnitude of f in terms of _f and various length scales. The ratio of the integral scale in the main direction of flow ( _x ) to the total domain length (L^*), _x ²=_x/L^*, plays an important role in the convergence of the perturbation scheme. For _x smaller than a critical value _c, _x < _c, the scheme's perturbation parameter is =_f/_x for one- dimensional flow, and =_f/_x ² for two-dimensional flow with mean flow in the x direction. For _x > _c, the parameter =_f/_x ³ may be thought as the perturbation parameter for two-dimensional flow. The shape of the log conductivity fluctuation two point correlation function, and boundary conditions influence the convergence of the perturbation scheme.     

Two-phase flow in heterogeneous porous media II: Numerical experiments for flow perpendicular to a stratified system

In this work, we make use of numerical experiments to explore our original theoretical analysis of two-phase flow in heterogeneous porous media (Quintard and Whitaker, 1988). The calculations were carried out with a two-region model of a stratified system, and the parameters were chosen be consistent with practical problems associated with groundwater flows and petroleum reservoir recovery processes. The comparison between theory (the large-scaled averaged equations) and experiment (numerical solution of the local volume averaged equations) has allowed us to identify conditions for which the quasi-static theory is acceptable and conditions for which a dynamic theory must be used. Byquasi-static we mean the following: (1) The local capillary pressure,everywhere in the averaging volume, can be set equal to the large-scale capillary pressure evaluated at the centroid of the averaging volume and (2) the large-scale capillary pressure is given by the difference between the large-scale pressures in the two immiscible phases, and is therefore independent of gravitational effects, flow effects and transient effects. Bydynamic, we simply mean a significant departure from the quasi-static condition, thus dynamic effects can be associated with gravitational effects, flow effects and transient effects. To be more precise about the quasi-static condition we need to refer to the relation between the local capillary pressure and the large-scale capillary pressure derived in Part I (Quintard and Whitaker, 1990). Herep _c ¦_y represents the local capillary pressure evaluated at a positiony relative to the centroid of the large-scale averaging volume, and {p _c }¦_x represents the large-scale capillary pressure evaluated at the centroid.In addition to{p _c } ^c being evaluated at the centroid, all averaged terms on the right-hand side of Equation (1) are evaluated at the centroid. We can now write the equations describing the quasi-static condition as , , This means that the fluids within an averaging volume are distributed according to the capillary pressure-saturation relationwith the capillary pressure held constant. It also means that the large-scale capillary pressure is devoid of any dynamic effects. Both of these conditions represent approximations (see Section 6 in Part I) and one of our main objectives in this paper is to learn something about the efficacy of these approximations. As a secondary objective we want to explore the influence of dynamic effects in terms of our original theory. In that development only the first four terms on the right hand side of Equation (1) appeared in the representation for the local capillary pressure. However, those terms will provide an indication of the influence of dynamic effects on the large-scale capillary pressure and the large-scale permeability tensor, and that information provides valuable guidance for future studies based on the theory presented in Part I.Roman Letters A scalar that maps {}*/t onto - A scalar that maps {}*/t onto - A interfacial area between the -region and the -region contained within, m² - A interfacial area between the -region and the -region contained within, m² - A interfacial area between the -region and the -region contained within, m² - a vector that maps ({}*/t) onto , m - a vector that maps ({}*/t) onto , m - b vector that maps ({p}– g) onto , m - b vector that maps ({p}– g) onto , m - B second order tensor that maps ({p}– g) onto , m² - B second order tensor that maps ({p}– g) onto , m² - c vector that maps ({}*/t) onto , m - c vector that maps ({}*/t) onto , m - C second order tensor that maps ({}*/t) onto , m² - C second order tensor that maps ({}*/t) onto . m² - D third order tensor that maps ( ) onto , m - D third order tensor that maps ( ) onto , m - D second order tensor that maps ( ) onto , m² - D second order tensor that maps ( ) onto , m² - E third order tensor that maps () onto , m - E third order tensor that maps () onto , m - E second order tensor that maps () onto - E second order tensor that maps () onto - p _c =(), capillary pressure relationship in the-region - p _c =(), capillary pressure relationship in the-region - g gravitational vector, m/s² - largest of either or - - - i unit base vector in thex-direction - I unit tensor - K local volume-averaged-phase permeability, m² - K local volume-averaged-phase permeability in the-region, m² - K local volume-averaged-phase permeability in the-region, m² - {K } large-scale intrinsic phase average permeability for the-phase, m² - K –{K }, large-scale spatial deviation for the-phase permeability, m² - K –{K }, large-scale spatial deviation for the-phase permeability in the-region, m² - K –{K }, large-scale spatial deviation for the-phase permeability in the-region, m² - K ^* large-scale permeability for the-phase, m² - L characteristic length associated with local volume-averaged quantities, m - characteristic length associated with large-scale averaged quantities, m - I _i i = 1, 2, 3, lattice vectors for a unit cell, m - l characteristic length associated with the-region, m - ; characteristic length associated with the-region, m - l _H characteristic length associated with a local heterogeneity, m - - n unit normal vector pointing from the-region toward the-region (n =–n ) - n unit normal vector pointing from the-region toward the-region (n =–n ) - p pressure in the-phase, N/m² - p local volume-averaged intrinsic phase average pressure in the-phase, N/m² - {p } large-scale intrinsic phase average pressure in the capillary region of the-phase, N/m² - p local volume-averaged intrinsic phase average pressure for the-phase in the-region, N/m² - p local volume-averaged intrinsic phase average pressure for the-phase in the-region, N/m² - p –{p }, large scale spatial deviation for the-phase pressure, N/m² - p –{p }, large scale spatial deviation for the-phase pressure in the-region, N/m² - p –{p }, large scale spatial deviation for the-phase pressure in the-region, N/m² - P _c p –{p }, capillary pressure, N/m² - {p_c}^c large-scale capillary pressure, N/m² - r ₀ radius of the local averaging volume, m - R ₀ radius of the large-scale averaging volume, m - r position vector, m - , m - S /, local volume-averaged saturation for the-phase - S ^* {}*{}*, large-scale average saturation for the-phaset time, s - t time, s - u , m - U , m² - v -phase velocity vector, m/s - v local volume-averaged phase average velocity for the-phase in the-region, m/s - v local volume-averaged phase average velocity for the-phase in the-region, m/s - {v } large-scale intrinsic phase average velocity for the-phase in the capillary region of the-phase, m/s - {v } large-scale phase average velocity for the-phase in the capillary region of the-phase, m/s - v –{v }, large-scale spatial deviation for the-phase velocity, m/s - v –{v }, large-scale spatial deviation for the-phase velocity in the-region, m/s - v –{v }, large-scale spatial deviation for the-phase velocity in the-region, m/s - V local averaging volume, m³ - V volume of the-phase in, m³ - V large-scale averaging volume, m³ - V capillary region for the-phase within, m³ - V capillary region for the-phase within, m³ - V _c intersection of m³ - V volume of the-region within, m³ - V volume of the-region within, m³ - V () capillary region for the-phase within the-region, m³ - V () capillary region for the-phase within the-region, m³ - V () , region in which the-phase is trapped at the irreducible saturation, m³ - y position vector relative to the centroid of the large-scale averaging volume, m Greek Letters local volume-averaged porosity - local volume-averaged volume fraction for the-phase - local volume-averaged volume fraction for the-phase in the-region - local volume-averaged volume fraction for the-phase in the-region - local volume-averaged volume fraction for the-phase in the-region (This is directly related to the irreducible saturation.) - {} large-scale intrinsic phase average volume fraction for the-phase - {} large-scale phase average volume fraction for the-phase - {}* large-scale spatial average volume fraction for the-phase - –{}, large-scale spatial deviation for the-phase volume fraction - –{}, large-scale spatial deviation for the-phase volume fraction in the-region - –{}, large-scale spatial deviation for the-phase volume fraction in the-region - a generic local volume-averaged quantity associated with the-phase - mass density of the-phase, kg/m³ - mass density of the-phase, kg/m³ - viscosity of the-phase, N s/m² - viscosity of the-phase, N s/m² - interfacial tension of the - phase system, N/m - , N/m - , volume fraction of the-phase capillary (active) region - , volume fraction of the-phase capillary (active) region - , volume fraction of the-region ( + =1) - , volume fraction of the-region ( + =1) - {p }– g, N/m³ - {p }– g, N/m³     

Das erweiterte Korrespondenzgesetz für die dynamische Idealviskosität und die Idealwärmeleitfähigkeit reiner Stoffe

Zusammenfassung Zur Berechnung der dynamischen Idealviskosität Ideal (T) und der Idealwärmeleitfähigkeit ideal (T) benötigt man die kritische TemperaturT _kr, das kritische spezifische Volum _kr, die MolmasseM, den kritischen Parameter _kr und die molare isochore WärmekapazitätC _v(T). Sowohl das theoretisch, als auch das empirisch abgeleitete erweiterte Korrespondenzgesetz ergeben eine für praktische Zwecke ausreichende Genauigkeit für die Meßwertwiedergabe, die bei den assoziierenden Stoffen und den Quantenstoffen jedoch geringer ist als bei den Normalstoffen.

---

The extended correspondence law for the ideal dynamic viscosity and the ideal thermal conductivity of pure substances

For the calculation of the ideal dynamic viscosity Ideal (T) and the ideal thermal conductivity ideal (T) the critical temperatureT _kr, the critical specific volumev _kr, the molecular massM, the critical parameter _kr, and the molar isochoric heat capacityC _v(T) is needed. Not only the theoretically determined but also the empirically determined extended correspondence law gives for practical use a good representation of the measured data, which for the associating substances and the quantum substances is not so good as for the normal substances.

     

On the boundary conditions at the macroscopic level

We study the problem of the boundary conditions specified at the boundary of a porous domain in order to solve the macroscopic transfer equations obtained by means of the volume-averaging method. The analysis is limited to the case of conductive transport but the method can be extended to other cases. A numerical study enables us to illustrate the theoretical results in the case of a model porous medium. Roman Letters _sf interfacial area of the s-f interface contained within the macroscopic system m² - A _sf interfacial area of the s-f interface contained within the averaging volume m² - C _p mass fraction weighted heat capacity, kcal/kg/K - d _s , d _f microscopic characteristic length m - g vector that maps to _s, m - h vector that maps to _f , m - K _eff effective thermal conductivity tensor, kcal/m s K - l REV characteristic length, m - L macroscopic characteristic length, m - n _fs outwardly directed unit normal vector for the f-phase at the f-s interface - n _e outwardly directed unit normal vector at the dividing surface - T ^* macroscopic temperature field obtained by solving the macroscopic equation (3), K - V averaging volume, m³ - V _s , V _f volume of the considered phase within the averaging volume, m³ - volume of the macroscopic system, m³ - _s , _f volume of the considered phase within the volume of the macroscopic system, m³ - dividing surface, m² Greek Letters _s , _f volume fraction - ratio of thermal conductivities - _s , _f thermal conductivities, kcal/m s K - spatial average density, kg/m³ - microscopic temperature, K - ^* microscopic temperature corresponding to T ^* , K - spatial deviation temperature K - error on the temperature due to the macroscopic boundary conditions, K - spatial average - ^s , ^f intrinsic phase average     

The dynamic performance of the Weissenberg rheogoniometer III. Large amplitude oscillatory shearing — harmonic analysis

The harmonic content of the nonlinear dynamic behaviour of 1% polyacrylamide in 50% glycerol/water was studied using a standard Model R 18 Weissenberg Rheogoniometer. The Fourier analysis of the Oscillation Input and Torsion Head motions was performed using a Digital Transfer Function Analyser.In the absence of fluid inertia effects and when the amplitude of the (fundamental) Oscillation Input motion _I is much greater than the amplitudes of the Fourier components of the Torsion Head motion _Tn empirical nonlinear dynamic rheological propertiesG _n (, ⁰),G _n (, ⁰) and/or _n (, ⁰), _n (, ⁰) may be evaluated without a-priori-knowledge of a rheological constitutive equation. A detailed derivation of the basic equations involved is presented.Cone and plate data for the third harmonic storage modulus (dynamic rigidity)G ₃ (, ⁰), loss modulusG ₃ (, ⁰) and loss angle ₃ (, ⁰) are presented for the frequency range 3.14 × 10^–2 1.25 × 10² rad/s at two strain amplitudes, _CP ⁰ = 2.27 and 4.03. Composite cone and plate and parallel plates data for both the third and fifth harmonic dynamic viscosities ₃ (, ⁰), _S (, ⁰) and dynamic rigiditiesG ₃ (, ⁰),G ₅ (, ⁰) are presented for strain amplitudes in the ranges 1.10 _CP ⁰ 4.03 and 1.80 _PP ⁰ 36 for a single frequency, = 3.14 × 10^–1 rad/s. Good agreement was obtained between the results from both geometries and the absence of significant fluid inertia effects was confirmed by the superposition of the data for different gap widths.     

Existence theorem for a minimum problem with free discontinuity set

We study the variational problem Where is an open set in ⁿ ,n2gL ^q () L (), 1q<+, O<, <+ andH _n–1 is the (n–1)-dimensional Hausdorff Measure.     

Stability and Self‐Oscillations of a Rotor Containing a Conducting Liquid in a Magnetic Field

This paper considers the problem of the stability in the small of the steadystate spinning of a rotor with a cylindrical cavity partly filled with a viscous, incompressible, conducting liquid in a magnetic field. The responses of the buttend boundary layers and the resultant force exerted by the liquid on the rotor performing circular precession of small radius are determined. The plane of the viscoelastic restraint parameters of the rotor axis was Dpartitioned into regions with different degrees of instability is constructed. Steadystate spinning near the boundary of the region of stability in the space of parameters is studied assuming nonlinear responses of the supports. It is shown that passage through the boundary of the region of stability leads to bifurcation of the steadystate spinning regime, resulting in periodic motion of the type of circular precession. The origin ofperiodic motion from steadystate spinning can be subcritical or supercritical.     

Flow in porous media II: The governing equations for immiscible,two-phase flow

The Stokes flow of two immiscible fluids through a rigid porous medium is analyzed using the method of volume averaging. The volume-averaged momentum equations, in terms of averaged quantities and spatial deviations, are identical in form to that obtained for single phase flow; however, the solution of the closure problem gives rise to additional terms not found in the traditional treatment of two-phase flow. Qualitative arguments suggest that the nontraditional terms may be important when / is of order one, and order of magnitude analysis indicates that they may be significant in terms of the motion of a fluid at very low volume fractions. The theory contains features that could give rise to hysteresis effects, but in the present form it is restricted to static contact line phenomena.Roman Letters (, = , , and ) A interfacial area of the- interface contained within the macroscopic system, m² - A _e area of entrances and exits for the -phase contained within the macroscopic system, m² - A interfacial area of the- interface contained within the averaging volume, m² - A ^* interfacial area of the- interface contained within a unit cell, m² - A _e ^* area of entrances and exits for the-phase contained within a unit cell, m² - g gravity vector, m²/s - H mean curvature of the- interface, m^–1 - H area average of the mean curvature, m^–1 - H – H , deviation of the mean curvature, m^–1 - I unit tensor - K Darcy's law permeability tensor, m² - K permeability tensor for the-phase, m² - K viscous drag tensor for the-phase equation of motion - K viscous drag tensor for the-phase equation of motion - L characteristic length scale for volume averaged quantities, m - characteristic length scale for the-phase, m - n unit normal vector pointing from the-phase toward the-phase (n = –n ) - p _c p – P , capillary pressure, N/m² - p pressure in the-phase, N/m² - p intrinsic phase average pressure for the-phase, N/m² - p – p , spatial deviation of the pressure in the-phase, N/m² - r ₀ radius of the averaging volume, m - t time, s - v velocity vector for the-phase, m/s - v phase average velocity vector for the-phase, m/s - v intrinsic phase average velocity vector for the-phase, m/s - v – v , spatial deviation of the velocity vector for the-phase, m/s - V averaging volume, m³ - V volume of the-phase contained within the averaging volume, m³ Greek Letters V /V, volume fraction of the-phase - mass density of the-phase, kg/m³ - viscosity of the-phase, Nt/m² - surface tension of the- interface, N/m - viscous stress tensor for the-phase, N/m² - / kinematic viscosity, m²/s     

Nonlinear rheological behavior of a concentrated spherical silica suspension

Linear and nonlinear viscoelastic properties were examined for a 50 wt% suspension of spherical silica particles (with radius of 40 nm) in a viscous medium, 2.27/1 (wt/wt) ethylene glycol/glycerol mixture. The effective volume fraction of the particles evaluated from zero-shear viscosities of the suspension and medium was 0.53. At a quiescent state the particles had a liquid-like, isotropic spatial distribution in the medium. Dynamic moduli G^* obtained for small oscillatory strain (in the linear viscoelastic regime) exhibited a relaxation process that reflected the equilibrium Brownian motion of those particles. In the stress relaxation experiments, the linear relaxation modulus G(t) was obtained for small step strain (0.2) while the nonlinear relaxation modulus G(t, ) characterizing strong stress damping behavior was obtained for large (>0.2). G(t, ) obeyed the time-strain separability at long time scales, and the damping function h() (–G(t, )/G(t)) was determined. Steady flow measurements revealed shear-thinning of the steady state viscosity () for small shear rates (< ^–1; = linear viscoelastic relaxation time) and shear-thickening for larger (>^–1). Corresponding changes were observed also for the viscosity growth and decay functions on start up and cessation of flow, + (t, ) and _– (t, ). In the shear-thinning regime, the and dependence of ₊(t,) and _–(t,) as well as the dependence of () were well described by a BKZ-type constitutive equation using the G(t) and h() data. On the other hand, this equation completely failed in describing the behavior in the shear-thickening regime. These applicabilities of the BKZ equation were utilized to discuss the shearthinning and shear-thickening mechanisms in relation to shear effects on the structure (spatial distribution) and motion of the suspended particles.Dedicated to the memory of Prof. Dale S. Parson     

Singular solutions of some quasilinear elliptic equations

We study isolated singularities of the quasilinear equation in an open set of ^N , where 1 < p N, p -1 q < N(p — 1)/ (N -p). We prove that, for any positive solution, if a singularity at the origin is not removable then either or u(x)/(x) any positive constant as x 0 where is the fundamental solution of the p-harmonic equation: . Global positive solutions are also classified.     

Diffusion in anisotropic porous media

An experimental system was constructed in order to measure the two distinct components of the effective diffusivity tensor in transversely isotropic, unconsolidated porous media. Measurements were made for porous media consisting of glass spheres, mica particles, and disks made from mylar sheets. Both the particle geometry and the void fraction of the porous media were determined experimentally, and theoretical calculations for the two components of the effective diffusivity tensor were carried out. The comparison between theory and experiment clearly indicates that the void fraction and particle geometry are insufficient to characterize the process of diffusion in anisotropic porous media. Roman Letters A interfacial area between - and -phases for the macroscopic system, m² - A _e area of entrances and exits of the -phase for the macroscopic system, m² - A interfacial area contained within the averaging volume, m² - a characteristic length of a particle, m - b average thickness of a particle, m - c _A concentration of species A, moles/m³ - c _o reference concentration of species A, moles/m³ - c _A intrinsic phase average concentration of species A, moles/m³ - c _a c _A–c _A, spatial deviation concentration of species A, moles/m³ - C c _A/c ₀, dimensionless concentration of species A - binary molecular diffusion coefficient, m²/s - D _eff effective diffusivity tensor, m²/s - D _xx component of the effective diffusivity tensor associated with diffusion parallel to the bedding plane, m²/s - D _yy component of the effective diffusivity tensor associated with diffusion perpendicular to the bedding plane, m²/s - D _eff effective diffusivity for isotropic systems, m₂/s - f vector field that maps c _A on to c _a , m - h depth of the mixing chamber, m     

Lp-estimates for the nonlinear spatially homogeneous Boltzmann equation

This paper studies L^p-estimates for solutions of the nonlinear, spatially homogeneous Boltzmann equation. The molecular forces considered include inverse k^th-power forces with k > 5 and angular cut-off.The main conclusions are the following. Let f be the unique solution of the Boltzmann equation with f(v,t)(1 + ¦v²¦)^(s ₁ ^{+ /p)/2} L¹, when the initial value f ₀ satisfies f ₀(v) 0, f ₀(v) (1 + ¦v¦²)^(s ₁ ^{+ /p)/2} L¹, for some s₁ 2 + /p, and f ₀(v) (1 + ¦v¦²)^s/2 L^p. If s 2/p and 1 < p < , then f(v, t)(1 + ¦v¦²)^{(s s} ₁)^/2 L^p, t > 0. If s >2 and 3/(1+ ) < p < , thenf(v,t) (1 + ¦v¦²)^(s(s ₁ ^{+ 3/p))/2} L^p, t > 0. If s >2 + 2C₀/C₁ and 3/(l + ) < p < , then f(v,t)(1 + ¦v¦²)^s/2 L^p, t > 0. Here 1/p + 1/p = 1, x y = min (x, y), and C₀, C₁, 0 < 1, are positive constants related to the molecular forces under consideration; = (k – 5)/ (k – 1) for k^th-power forces.Some weaker conclusions follow when 1 < p 3/ (1 + ).In the proofs some previously known L-estimates are extended. The results for L^p, 1 < p < , are based on these L-estimates coupled with nonlinear interpolation.     

Injectivity and self-contact in nonlinear elasticity

Let be a bounded open connected subset of ³ with a sufficiently smooth boundary. The additional condition det dx vol () is imposed on the admissible deformations : ¯ of a hyperelastic body whose reference configuration is ¯. We show that the associated minimization problem provides a mathematical model for matter to come into frictionless contact with itself but not interpenetrate. We also extend J. Ball's theorems on existence to this case by establishing the existence of a minimizer of the energy in the space W ^1,p (;³), p > 3, that is injective almost everywhere.     

The secondary flow induced around a sphere in an oscillating stream of elastico-viscous liquid

The present paper is devoted to the theoretical study of the secondary flow induced around a sphere in an oscillating stream of an elastico-viscous liquid. The boundary layer equations are derived following Wang's method and solved by the method of successive approximations. The effect of elasticity of the liquid is to produce a reverse flow in the region close to the surface of the sphere and to shift the entire flow pattern towards the main flow. The resistance on the surface of the sphere and the steady secondary inflow increase with the elasticity of the liquid.Nomenclature a radius of the sphere - b ^ik contravariant components of a tensor - e contravariant components of the rate of strain tensor - F() see (47) - G total nondimensional resistance on the surface of the sphere - g _ik covariant components of the metric tensor - f, g, h secondary flow components introduced in (34) - k ₀ measure of relaxation time minus retardation time (elastico-viscous parameter) - K =k ₀ ²/V ₀ ² , nondimensional parameter characterizing the elasticity of the liquid - n measure of the ratio of the boundary layer thickness and the oscillation amplitude - N, T defined in (44) - p arbitrary isotropic pressure - p _ik covariant components of the stress tensor - p ^ik contravariant components of the stress tensor associated with the change of shape of the material - R =V ₀ a/v, the Reynolds number - S =a/V ₀, the Strouhall number - r, , spherical polar coordinates - u, v, w r, , component of velocity - t time - V(, t) potential velocity distribution around the sphere - V ₀ characteristic velocity - u, v, t, y, P nondimensional quantities defined in (15) - reciprocal of s - density - defined in (32) - defined in (42) - ₀ limiting viscosity for very small changes in deformation velocity - complex conjugate of - oscillation frequency - = ₀/, the kinematic coefficient of viscosity - , defined in (52) - (, y) stream function defined in (45) - =(NT/2n)^1/2 y - /t convective time derivative (1) _ik