3D打印模型在光弹性法教学中的应用研究

本文将3D打印技术引入光弹性法的教学中,解决了传统技术制作光弹模型时成型周期长、试样初始残余应力较大等问题.以圆盘为例,详细介绍了3D打印光弹模型的制备过程.基于光弹系统测量得到了对径受压模型内部的等倾线、等色线相位和条纹值.制备了含不同形状孔隙的教学模型,丰富了课堂内容.展示了数字模型设计、物理模型制备、光弹条纹图采...     

用TX—1型数字图象处理系统自动采集和处理光弹图象

本文介绍了 TX—1型光测图象自动采集和处理系统,以径向受压圆盘为例,用该系统采集了等倾线、等色线和等和线。采用跟踪法提取条纹中心线,微机进行自动处理,实验结果与理论计算进行了比较。     

一种通过改进Canny算子提取光弹条纹骨架线的方法

光弹性法是确定应力集中系数的有效手段，在实际工程中应力参数都是通过分析光弹干涉条纹图获得的，由于光弹干涉条纹图的复杂性，且影响成像质量的因素较多，因此如何从光弹干涉条纹图中撇开其复杂性，较高精度的提取骨架线，是一项较困难的工作，本文提出一种由改进的Canny算子对条纹方位图进行直接运算提取光弹条纹骨架线的算法，实验表明此方法对光弹条纹图很有效。     

彩色光弹性干涉影像分析系统

自行开发的“彩色光弹性干涉影像分析系统”首先利用CCD成像和图像采集设备,将光弹图像以数字图像的形式存储到计算机,然后通过对存储的光弹图像进行处理,得到物体边界、等差线、等倾线等数据。最后根据这些数据,绘制出主应力迹线,并进行二维的和三维的应力分析。本文着重介绍了系统整体设计以及系统研制的难点问题(彩色光弹图像处理、主应力迹线的绘制等)。系统可以通过对彩色图像进行分解,应用目前已经比较成熟的灰度光弹图像处理技术,来完成彩色图像的处理;也可以直接应用彩色信息来确定条纹级数,进行相关处理。彩色图像能够比灰度图像提供更精确的图像信息,以满足高精度测量的要求。     

动光弹求解应力分量的混合法

本文采用动光弹瞬态数据信息(等色线及等倾线)及以变形协调方程为依据导出的有限差分方程相结合的方法,求解动载荷作用下结构的全场应力分量。以型结构为例,在沙丁高速摄影设备上测取动光弹数据,用计算机分解该结构的全场应力分量,所得结果与电测值较为接近。     

三截面法在光弹图像处理中的应用

为了适应光弹图像自动处理的需要,本文采用 SHIBUYA 等人提出的一种计算方法——三截面法,将模型光弹应力分析程序化.这种方法只需利用等差线条纹,避开了等倾线,减少了误差来源,并且可以只求出某一指定截面上的应力,不必将全场应力求出,计算量小,速度快,对其提供的条纹级次精度愈高,计算结果的精确度愈好。为了获取较高精度的条纹级数,本文提出了一个用以确定整、半数级次的干涉条纹细化法,以及求取分数级条纹级次的曲线拟合法,方法简单,速度快,精度高。     

斜拉桥塔锚固区光弹性应力分析与等倾线图像处理

本文采用光弹性冻结应力法，对独塔斜拉桥塔锚固区进行了应力分析，给出了有关截面的边界应力分布及主应力迹线，从而为优化工程设计提供了重要的参考依据。本文还提出了一种新的提取等倾线的方法──图像对数增强相减法，实现了等倾线与等差线条纹的分离，同时使条纹得到了细化，提高了处理等倾线的速度与准确度。编制了自动绘制主应力迹线的程序，利用它绘制了桥塔截面的次主应力迹线。     

光弹性—数字散斑相关混合法在光弹条纹主应力分解中的应用

光弹性法是研究结构内部应力分布问题的一个有效方法.光弹性实验中,通常可以方便地得到等色线条纹图.确定了等色线条纹级数以后,为获得平面模型中任意点的应力完全解,需要借助其它方法给出一个补充方程.本文将光弹性法与数字散斑相关法相结合,提出一种用于光弹性法分离主应力的新方法:光弹性-数字散斑相关混合法.在理论研究的基础上,设计了光弹性-数字散斑相关混合法实验系统,并通过相应的三点弯曲实验对该方法和实验系统的有效性做出分析和论证.该研究为光弹全场应力分解以及动态光弹性-数字散斑相关混合法提供了理论和实验基础.     

提取等倾线的数字图象处理法

本文详细介绍了应用数字图象处理技术进行图象相除和图象相减,获取没有等色线干扰的、精确定位的和倍增信息的等倾线的全场分析方法,并作了典型验证实验,为光测弹性力学的改革提供了途径和理论依据。     

基于动态光弹性方法的冲击载荷作用下自由边界主应力研究

当物体在冲击载荷作用下,物体内部会产生应力波,研究应力波的传播过程及规律对研究物体受冲击载荷作用具有重大的意义.应力波在物体内传播时,在自由边界处产生的主应力状态对于理论求解和计算有着重要意义.采用动态光弹性方法,结合新型动光弹系统及相关实验设备采集物体在冲击载荷作用下的等倾线和等差线条纹图,通过分析等倾线的条纹,得出等倾线与自由边界相交所成角度不为0°或909,得出在物体自由边界处两个主应力均存在且不为零的结论.针对上述结果,采用电测方法进行验证,两试验结果相符合,方案可行且准确.     

Photoelastic Stress Analysis by Use of Hybrid Technique and Fringe Phase Shifting Method

0Introduction Photoelasticityisanopticalmeasurementmethodforstressanalysis.Itcanperformwhole field measurementduetotwo dimensionalsignalprocessingoflight.Alsoitcanperformnon contact measurementbecauseoftransmissionorreflectionoflightonaspecimen.Photoelast…     

Computerized image processing for whole-field determination of isoclinics and isochromatics

A new computerized method for the whole-field determination of isoclinic and isochromatic parameters in a stressed photoelastic model is presented. The intensity data obtained from the fringe pattern at three analyzer positions (0, 45, and 90 degrees) in a plane polariscope, are used for the computations. The relationships between the intensity values and the photoelastic parameters are derived using Stokes representation of polarized light. The experiments were carried out using a computer-based image-processing system. The accuracy achieved is assessed by comparing the theoretical and measured values. Accuracies of within ±3 degrees for isoclinics and ±0.05 fringe for isochromatics are shown to be possible.     

光弹性等倾线获取的图像处理技术

提出一种对数微分法,有效地解决了光弹性实验中等倾线的提取问题,不仅可消除平面偏振光场中等差线对等倾线的影响,而且能高精度地提取任意复杂受力模型等倾线.最后给出了等倾线提取及精度分析的两个实例,实验证明;本方法具有广阔的应用前景.     

Cyclic-stress studies by time-averaged photoelasticity

This paper describes an experimental method whereby the amplitude of cyclic stresses may be readily determined by time-averaged photoelasticity. Using an ordinary polariscope with a monochromatic-light source, ‘time-averaged isochromatics fringes’ are formed if the photographic film in the camera is exposed with an exposure time equal to one or several periods while the photoelastic model is undergoing steady-state cyclic loading. The fringe pattern depicts amplitudes of the oscillating stresses according to the zeroth-order Bessel function. These properties permit the determination of a time-averaged cyclic stress-optic law. It is also possible to use the method to determine time-averaged isoclinics. The method has great potentiality in the study of in-plane vibrations.     

A new method to increase the sensitivity of photoelasticity

A method is proposed to read the isochromatic-fringe order continuously as a function of position. It utilizes the fact that the fringe order is a continuous function of the light intensity, which is converted into the density of a photographic negative and then traced out either by a microdensitometer or isodensitracer. Explicit relationship between the fringe order and the film density is obtained. Hundreds of points can be read between a half and an adjacent integral order. The method is whole field in nature and offers the possiblity of direct computer processing of photoelastic information.     

A simple method for the digital determination of the photoelastic fringe order

A new and simple approach to the digital determination of a photoelastic fringe order using two different loads is proposed. The relationships between the intensity values of light and the isochromatic fringe orders generated from two different loads are derived. The scheme used for the automated determination of the total fringe orders of a full-field photoelastic fringe pattern is described. The usefulness of this method is demonstrated using two isochromatic fringe patterns under two different loads. Extra filters are not needed in the proposed method as in the case of the two-wavelength method.     

A neoteric interferometer for use in holographic photoelasticity

A shortcoming of the conventional holographic interferometer used in photoelasticity is that, for the double-exposure cases, the resulting fringe patterns are a complex combination of conventional isochromatic and isopachic fringes. This paper describes a holographic interferometer that may be used to obtain separate but simultaneous isochromatic- and isopachic-fringe patterns for photoelastic models in states of plane stress. The method requires a model with a partially reflecting front surface. Isopachics, which are proportional to the thickness change, are recorded using holographic interferometry from the transmitted light. The isochromatics are obtained from the transmitted light by conventional means. General equations relating the surface displacement of the specimen to the observed fringe patterns are developed, and examples of static and dynamic loadings are shown.     

Photoelastic and holographic analysis of a turbine-engine component

Isopachics obtained by holographic methods are combined with the isochromatics and isoclinics of a conventional photoelastic analysis to obtain a complete two-dimensional stress analysis of a highly critical region of a jet engine. The analysis of the disk/blade dovetail region of the third stage fan of a turbine engine shows a stress-concentration factor of 5.2 in the disk fillet and 4.8 in the blade fillet relative to the average stress in the neck section of the disk. The stress distribution along the edge of the blade fillet and on an interior line in the disk lug is also reported. Preliminary redesign of the disk fillet indicates that a 27-percent reduction in the fillet stress of existing third-stage disks is possible by remachining the relief area between the blade and disk lugs.     

Photoelastic experimental hybrid method for fracture mechanics of anisotropic materials

In this paper, the isotropic and anisotropic photoelastic experimental hybrid methods for fracture mechanics are developed. Using the photoelastic experimental hybrid method, it is demonstrated that one can precisely obtain stress intensity factors and separate the stress components of isotropic and anisotropic plate problems from the only isochromatics.