Plastic buckling analysis of thick plates using p-Ritz method

This paper is concerned with the application of the p-Ritz method for the plastic buckling analysis of thick plates. In order to allow for the effect of transverse shear deformation in thick plates, the Mindlin plate theory is adopted. The plastic buckling behaviour of the plate is captured by using the incremental and deformation theories of plasticity. The material property of the plate is assumed to obey the Ramberg–Osgood stress–strain relation. The p-Ritz method will be applied to obtain the governing eigenvalue equation for the plastic buckling analysis of uniformly stressed plates with edges defined by polynomial functions. In the p-Ritz method, the displacement functions of the plate are approximately represented by the product of mathematically complete two-dimensional polynomial functions and boundary equations raised to appropriate powers that ensure the satisfaction of the geometric boundary conditions. The validity, convergence and accuracy of the method were demonstrated for various plate shapes such as rectangular, triangular and elliptical shapes. A parametric study was also undertaken to study the plastic buckling behaviour and the effect of transverse shear deformation.     

Secondary buckling of a flat plate under uniaxial compression: Part 2. Analysis of clamped plate by F.E.M. and comparison with experiments

In Part 1, a theoretical analysis was used to study the secondary buckling of a simply supported plate. In Part 2, a clamped plate is analysed by the finite element method. The stability criterion for a non-linear post-buckling equilibrium state is evaluated by the sign of the determinant of the stiffness matrix. It should be noted that the secondary buckling loads of clamped plates are unexpectedly smaller than those of simply supported plates and are only one and a half times the primary buckling loads. In previous analyses, only a quarter segment of the plate was considered by assuming a stable equilibrium state with symmetrical mode. However, instability can also be predicted by considering the unsymmetrical mode over the whole plate. Results of experimental analysis of secondary instability of clamped square plates under uniaxial compression agreed with the numerical results.     

A comprehensive analysis of functionally graded sandwich plates: Part 2—Buckling and free vibration

The sinusoidal shear deformation plate theory, presented in the first part of this paper, is used to study the buckling and free vibration of the simply supported functionally graded sandwich plate. Effects of rotatory inertia are considered. The critical buckling load and the vibration natural frequency are investigated. Some available results for sandwich plates non-symmetric about the mid-plane can be retrieved from the present analysis. The influences of the transverse shear deformation, plate aspect ratio, side-to-thickness ratio and volume fraction distributions are studied. In addition, the effect of the core thickness, relative to the total thickness of the plate, on the critical buckling load and the eigenfrequencies is investigated.     

梯度弹性基础上正交异性薄板的屈曲分析

基于双参数弹性基础模型,研究了梯度弹性基础上正交异性薄板的屈曲问题. 首先,基于能量法与变分原理,给出了梯度弹性基础上正交异性薄板的屈曲控制方程,并得到了梯度弹性基础刚度系数K₁ 与K₂的计算式;进而,通过将位移函数采用三角函数展开的方法,给出了单向压缩载荷作用下、四边简支正交异性弹性基础板屈曲载荷的计算式;在算例中,通过将该文的解退化到单纯的正交异性板,并与经典弹性解比较,证明了理论的正确性;最后,求解了弹性模量在厚度方向上呈幂律分布的梯度基础上的薄板屈曲问题,分析了基础上下表层材料弹性模量比与体积分数指数对屈曲载荷的影响.     

An analytical solution for buckling of moderately thick functionally graded sector and annular sector plates

In this article, an analytical solution for buckling of moderately thick functionally graded (FG) sectorial plates is presented. It is assumed that the material properties of the FG plate vary through the thickness of the plate as a power function. The stability equations are derived according to the Mindlin plate theory. By introducing four new functions, the stability equations are decoupled. The decoupled stability equations are solved analytically for both sector and annular sector plates with two simply supported radial edges. Satisfying the edges conditions along the circular edges of the plate, an eigenvalue problem for finding the critical buckling load is obtained. Solving the eigenvalue problem, the numerical results for the critical buckling load and mode shapes are obtained for both sector and annular sector plates. Finally, the effects of boundary conditions, volume fraction, inner to outer radius ratio (annularity) and plate thickness are studied. The results for critical buckling load of functionally graded sectorial plates are reported for the first time and can be used as benchmark.     

Imperfection sensitivity of ultimate buckling strength of elastic-plastic square plates under compression

The mechanism of imperfection sensitivity of elastic-plastic plates under compression is complex as they undergo elastic and/or plastic buckling, dependent on their width-thickness ratio. For elastic buckling, the Koiter power law is an established means to describe the imperfection sensitivity. Yet, for plastic buckling, there is no such an established way to describe it. In this paper, the quadratic power law is advanced to describe imperfection-insensitive plastic buckling behavior. The Koiter power law is extended by implementing the quadratic law so as to describe the elastic and plastic buckling in a synthetic manner. The finite-displacement, elastic-plastic analysis was conducted on simply-supported square plates under compression by varying the plate thickness and the initial deflection of a sinusoidal form. In association with an increase of the plate slenderness parameter (decrease of plate thickness), the predominant buckling is shown to change from (1) plastic buckling to (2) unstable elastic-plastic buckling and to (3) elastic stable bifurcation followed by a maximum point of load. In accordance with the change of the mechanism of buckling, the power law is changed pertinently to describe the complex imperfection sensitivity of the compression plates in a synthetic manner. The extended imperfection sensitivity law is thus advanced as a simple and strong tool to describe the ultimate buckling strength of elastic-plastic plates.     

开孔平板的剪切稳定性实验

对四边简支和四周边受均匀剪切力的矩形薄平板的屈曲失稳,作了实验分析及数值计算.用作者所设计的剪切试验装置,对一组开孔及开孔后加强的薄平板进行了剪切稳定性试验,求得薄平板失稳时的载荷——挠度曲线及失稳波形,由曲线上拐点来确定平板失稳临界载荷,并将实验结果与有限元数值计算结果作了比较.     

Thermoelastic buckling behavior of thick functionally graded rectangular plates

Thermoelastic buckling behavior of thick rectangular plate made of functionally graded materials is investigated in this article. The material properties of the plate are assumed to vary continuously through the thickness of the plate according to a power-law distribution. Three types of thermal loading as uniform temperature raise, nonlinear and linear temperature distribution through the thickness of plate are considered. The coupled governing stability equations are derived based on the Reddy’s higher-order shear deformation plate theory using the energy method. The resulted stability equations are decoupled and solved analytically for the functionally graded rectangular plates with two opposite edges simply supported subjected to different types of thermal loading. A comparison of the present results with those available in the literature is carried out to establish the accuracy of the presented analytical method. The influences of power of functionally graded material, plate thickness, aspect ratio, thermal loading conditions and boundary conditions on the critical buckling temperature of aluminum/alumina functionally graded rectangular plates are investigated and discussed in detail. The critical buckling temperatures of thick functionally graded rectangular plates with various boundary conditions are reported for the first time and can be served as benchmark results for researchers to validate their numerical and analytical methods in the future.     

Photoelastic analysis of a thick plate with an elliptical hole subjected to simple out-of-plane bending

A three-dimensional photoelastic analysis using the stress freezing and slicing techniques was employed to study the stress distribution and the stress-concentration factors around an elliptical hole in a plate of finite thickness. The plate was subjected to simple out-of-plane bending. A special bending device was designed to produce uniform bending moment at the two opposite free edges of the plate. Six plates with various elliptical holes were studied. The stress variation across the plate thickness at the periphery of the elliptical hole was also investigated. The experimental results were correlated with the existing theoretical solutions.     

Thermal post-buckling analysis of imperfect laminated plates using a higher-order shear deformation theory

Thermal post-buckling analysis is presented for a simply supported, composite laminated plate subjected to uniform or non-uniform tent-like temperature loading. The initial geometrical imperfection of the plate is taken into account. The formulations are based on the Reddy's higher-order shear deformation plate theory, and include thermal effects. The analysis uses a mixed Galerkin-perturbation technique to determine thermal buckling loads and post-buckling equilibrium paths. Numerical examples cover the performances of perfect and imperfect, antisymmetrically angle-ply and symmetrically cross-ply laminated plates. The effects played by transverse shear deformation, thermal load ratio, plate aspect ratio, total number of plies, fiber orientation and initial geometrical imperfections are studied. Typical results are presented in dimensionless graphical form.     

Stability analysis of functionally graded rectangular plates under nonlinearly varying in-plane loading resting on elastic foundation

In this research work, an exact analytical solution for buckling of functionally graded rectangular plates subjected to non-uniformly distributed in-plane loading acting on two opposite simply supported edges is developed. It is assumed that the plate rests on two-parameter elastic foundation and its material properties vary through the thickness of the plate as a power function. The neutral surface position for such plate is determined, and the classical plate theory based on exact neutral surface position is employed to derive the governing stability equations. Considering Levy-type solution, the buckling equation reduces to an ordinary differential equation with variable coefficients. An exact analytical solution is obtained for this equation in the form of power series using the method of Frobenius. By considering sufficient terms in power series, the critical buckling load of functionally graded plate with different boundary conditions is determined. The accuracy of presented results is verified by appropriate convergence study, and the results are checked with those available in related literature. Furthermore, the effects of power of functionally graded material, aspect ratio, foundation stiffness coefficients and in-plane loading configuration together with different combinations of boundary conditions on the critical buckling load of functionally graded rectangular thin plate are studied.     

Thermal buckling analysis of truss-core sandwich plates

Truss-core sandwich plates have received much attention in virtue of the high values of strength-to-weight and stifness-to-weight as well as the great ability of impulseresistance recently. It is necessary to study the stability of sandwich panels under the influence of the thermal load. However, the sandwich plates are such complex threedimensional(3D) systems that direct analytical solutions do not exist, and the finite element method(FEM) cannot represent the relationship between structural parameters and mechanical properties well. In this paper, an equivalent homogeneous continuous plate is idealized by obtaining the efective bending and transverse shear stifness based on the characteristics of periodically distributed unit cells. The first order shear deformation theory for plates is used to derive the stability equation. The buckling temperature of a simply supported sandwich plate is given and verified by the FEM. The efect of related parameters on mechanical properties is investigated. The geometric parameters of the unit cell are optimized to attain the maximum buckling temperature. It is shown that the optimized sandwich plate can improve the resistance to thermal buckling significantly.     

Buckling strength analysis of adhesively bonded aluminum hat sections

This paper provides an analytical solution for the critical buckling stress of adhesively bonded aluminum hat sections under static axial compression. The governing rectangular plate member of the structure is treated based on the differential equation for out-of-plane deflections of thin plates. Finite element eigenvalue buckling analysis is performed to verify the assumed simply supported boundary conditions for common edges between adjacent plate elements. Elastic restraint is applied to the two loaded edges of the rectangular plate, and the relative critical buckling stress is computed according to the transcendental equations. It is found from experiments that there is no adhesive bonding failure in the elastic buckling stage. The analytical solution yields buckling stress predictions which are in reasonable agreement with measured values.     

Compressive strength of edge-loaded corrugated board panels

Postbuckling strength of simply supported corrugated board panels subjected to edge compressive loading has been studied experimentally using a specially developed test fixture. Although the load versus out-of-plane displacement response was highly sensitive to the presence of initial imperfections in the panels, the collapse loads did not vary much, which is attributed to the stable postbuckling behavior of the plates. Thin plates collapsed at nearly twice the buckling load, while thick panels collapsed at loads below the elastic critical buckling load. Local buckling of the facing on the concave side of the buckled plate was observed at load levels close to the collapse load. The plate collapse was triggered by compressive failure of the facings that initiated at the unloaded edges. A simplified design analysis was derived based on approximate postbuckling analysis and compared with an existing design formula for corrugated board panels and boxes.     

Postbuckling of long unsymmetrically laminated composite plates under axial compression

An approximate solution is given for the postbuckling of infinitely long and unsymmetrically laminated composite plates. This solution is obtained by superposing a polynomial transverse displacement given by bending due to unsymmetric laminate configurations and a simple functional representation for the buckling mode in conjunction with the Galerkin method. Nondimensional parameters are used to express the approximate solution in a very simple and clear formulation. The results given by this solution for axial compression in the longitudinal direction are compared with the results given by the nonlinear finite element method (FEM) for finite length rectangular long plates. The influence of the boundary conditions on postbuckling response is also studied. For the FEM analysis, two different simply supported boundary conditions on the long edges of the plate are considered. It is found that these two sets of boundary conditions give different results for the buckling and postbuckling finite element analysis. In most cases the FEM analysis overestimate and, respectively, underestimate the approximate closed form solution, depending on the type of simply supported boundary condition considered. Thus, the approximate solution appears useful for design purposes as an averaged quantity between the two FEM analyses. Also, it is found that the reduced bending stiffness method can be successfully used for determining the approximate solution.     

Axial buckling of perforated plates reinforced with strips and middle tubes

Global buckling of perforated plates reinforced with circumferential strip or short tube is investigated. Effects of the hole radius, width of the strip, thickness and radius of the tube and boundary conditions are studied numerically and experimentally. Axial buckling loads of the holed plates decrease versus the hole radius. By using the strip or tube, the buckling strength increases significantly. In some cases, the stiffened plate has buckling load greater than the perfect plate. Numerical studies showed that the increasing restraints at the boundaries increase the buckling strength in any case and geometry of the plate.     

基于新修正偶应力理论的Mindlin层合板稳定性分析

基于新的各向异性修正偶应力理论提出一个Mindlin复合材料层合板稳定性模型。该理论包含纤维和基体两个不同的材料长度尺度参数。不同于忽略横向剪切应力的修正偶应力Kirchhoff薄板理论,Mindlin层合板考虑横向剪切变形引入两个转角变量。进一步建立了只含一个材料细观参数的偶应力Mindlin层合板工程理论的稳定性模型。计算了正交铺设简支方板Mindlin层合板的临界载荷。计算结果表明该模型可以用于分析细观尺度层合板稳定性的尺寸效应。     

Shear buckling of infinite plates resting on tensionless elastic foundations

The buckling problem of an infinite thin plate resting on a tensionless Winkler foundation and subjected to shearing loads is investigated. The infinite plate is simplified to a one-dimensional mechanical model by assuming a lateral buckling mode function and a borderline function between contact and non-contact regions. After the governing differential equations for the plate sections in the contact and non-contact regions have been solved, the problem reduces to two nonlinear algebraic equations. Buckling coefficients for plates with simply supported edges and clamped edges are determined for a range of relative foundation stiffness factors. Comparison of the results with existing theory and finite element analyses shows good agreement.     

基于新修正偶应力理论的Mindlin层合板热稳定性分析

以新修正偶应力理论为基础,首次提出了机械载荷与热载荷共同作用下的微尺度Mindlin层合板热稳定性模型,该模型只引入一个材料尺度参数,通过虚功原理推导出了控制方程和边界条件,以四边简支方板为例,进行了热稳定性分析,应用纳维叶解法得到解析解。结果表明,所建模型可以捕捉到尺度效应。材料尺度参数值越大,屈曲临界温度越高;当跨厚比增大时,屈曲临界温度下降;随着板几何参数的增大,模型将退化为宏观模型;温度变化量越大,考虑热载荷作用下的屈曲临界载荷越大,尺度效应体现越显著。