求解水下纵向加肋无限长非圆柱壳声辐射问题的一种新的半解析方法

基于齐次扩容精细积分法和复数矢径虚拟边界谱方法，利用Fourier积分变换和稳相法，提出了一种具有较高效率和精度的新的求解水下纵向加肋无限长非圆柱壳声辐射问题的半解析方法．考虑了非圆柱壳和肋骨之间同时存在多种相互作用力和力偶矩，较已往很多学者仅计及法向相互作用力更加符合实际．不仅比较了该文方法和精确解计算纵向加肋圆柱壳在集中点力激励下的声辐射计算结果，同时还研究了肋骨数量、大小以及椭圆柱壳横截面椭圆度对声辐射特性的影响．数值计算结果表明该文方法较已有的混合FE-BE法更为有效．     

刚性角隅内圆柱壳结构声辐射特性研究

本文对流场中处于刚性角隅内圆柱壳结构振动-声辐射问题进行研究．基于双反射方法，推导了位于两个垂直刚性壁面角隅区内圆柱壳结构的振动-声辐射方程．以此为基础，开展受线环向激励力作用的圆柱壳结构的振动-声辐射特性的数值计算．研究了刚性角隅内圆柱壳结构布置位置及计算频率对声辐射功率、声指向性的影响．计算结果可为分析含复杂声学边界的结构声振问题提供技术支持．     

考虑结构损耗时水中圆柱壳的振动声辐射特性研究

基于圆柱壳的振动方程以及壳与流体边界上振速连续条件,推导了简支在刚性圆管上的有限长圆柱壳的低频声辐射的自辐射阻抗和互辐射阻抗计算公式,在考虑结构损耗情况下求解了圆柱壳的机械阻抗、表面振速、辐射声功率、辐射效率以及辐射声场的分布特征。结果表明:低阶模态自辐射阻抗大于互辐射阻抗,且自辐射阻随模态阶次增大迅速减小;当p、m同为偶数或奇数时模态辐射阻系数rpmqq大于零,反之小于零。模态辐射抗系数xpmqq在零值附近波动并当ka趋于无穷大时xpmqq都趋向零;p与m相差越大,rpmqq和xpmqq越小。当激励力频率较低时圆柱壳辐射声场指向性为"∞"和"8"叠加的形状;随频率增高,轴向模态和周向模态综合效果导致辐射声场指向性趋于复杂。计算简支圆柱壳的声辐射特征,必须要考虑结构的损耗。     

内部声激励下加筋圆柱壳的声辐射特性分析

从Flügge薄壳理论和Helmholtz波动方程出发,根据模态叠加原理推导了有限长加筋圆柱壳受机械力和内部声源简谐激励下的"内部声腔-加筋柱壳-外部声场"耦合方程.比较了点力和点声源作用时圆柱壳的声辐射特性以及传递损失.结果表明:在讨论的频率范围内,点声源对内场均方声压起主要作用;点声源作用下外场辐射声压分布较均匀,其传递损失较点力作用下的大,但壳体的外场声辐射效率较点声源作用下的高.分析结果对圆柱壳体结构的声学设计具有一定的参考价值.     

任意边界条件下环肋圆柱壳振动特性的建模与求解

边界条件对环肋圆柱壳的振动特性有重要影响。基于能量法,把环肋看作离散模型,构建了任意边界条件下加环肋圆柱壳的动力学模型。采用一种改进的傅里叶级数作为位移容许函数,通过瑞利里兹程序求解结构的拉格朗日方程,得到环肋圆柱壳的振动模态和频响特性。通过与实验和有限元(FEM)方法的计算结果进行对比,验证了论文方法的准确性,在此基础上分析了环肋偏心方式、截面尺寸、位置分布和边界弹簧刚度等参数对环肋圆柱壳振动特性的影响。     

多源激励下水中有限长加肋圆柱壳体声振特性研究

为了研究多源激励下水中有限长加肋圆柱壳体的声振特性，由Flügge壳体振动理论建立了单频多源激励下水中长度为2L 的有限长加环肋和纵肋壳体的声振耦合方程。将壳体结构位移、表面声压以及激励力展开为各阶模态与波形的组合形式，将肋骨作用表示为附加阻抗与各阶模态的叠加，导出了单频多源激励下加肋壳体振动和声辐射的解析表达式，并通过算例研究了肋骨、激励源相对位置对壳体声振特性的影响。计算结果表明：肋骨改变了壳体的共振特性，使共振频率处壳体的表面平均振速级降低，导致共振频率附近的辐射效率级增加3~5dB；将集中力转化为轴向分布的激振力可降低壳体的中高频处辐射声功率级，在频率f＞500Hz频段，轴向距离为L/4时的幅值比单点激励低3~5dB；将集中力转化为周向分布的激振力可降低壳体的低中频处辐射声功率级，在f＜150Hz频段，周向相距为π/2和π/3时的辐值比单点激励低7~9dB。本文研究结果可为水下结构的振动与噪声控制提供理论依据。     

静水压下加筋圆柱壳振动特性样条分析方法

本文用样条方法[1]分析了静水压下纵向加筋和环向加肋圆柱壳体的振动特性,文中导出的样条步长矩阵,将等步长样条推广为变步长样条,拓广了样条的使用。文中探讨了静水压对加筋圆柱壳振动特性的影响以及不同加筋对振动特性的影响,计算了几个模型,并与其它文献计算结果进行了比较。     

水下环向双周期加肋圆柱壳体的自由振动

以浸没于水中的弹性环向双周期加肋薄圆柱壳为研究对象，考虑介质与结构振动的耦合效应，研究流固耦合系统的自由振动。基于Kennard薄壳理论、Helmholtz方程以及壳壁外表面的运动协调条件，并借助Dirac-δ函数引进肋骨对壳体的作用，从而建立耦合系统的运动方程。通过富氏积分变换、引进算子，并利用算子的周期性，得到系统的频率方程。采用沿实波数轴搜索求根的方法，重点计算了水下无限长环向双周期加肋柱壳的自由传播波频率系数，并进一步研究了流场和肋参数对壳体固有频率的影响。     

静水压力下环加肋圆柱壳总体与局部失稳分析的复合有限…

本文提出了一种计算环加肋圆柱壳稳定性的新方法－复合有限条法。该方法能够在一个复合有限条元中计入若干个横向加肋的影响，并能考虑肋骨的偏心，是一种子结构方法。算例表明，复合有限条法具有很高的求解精度和效率，是一种分析加肋柱壳结构的较理想方法。该方法不仅能够计算环加肋圆柱壳的总体失稳临界载荷，而且可计算其局部失稳临界载荷。     

静水压力下环加肋圆柱壳总体与局部失稳分析的复合有限条法

本文提出了一种计算环加肋圆柱壳稳定性的新方法─—复合有限条法。该方法能够在一个复合有限条元中计入若干个横向加肋的影响，井能考虑肋骨的偏心，是一种子结构方法。算例表明，复合有限条法具有很高的求解精度和效率，是一种分析加肋柱壳结构的较理想方法。该方法不仅能够计算环加肋圆柱壳的总体失稳临界载荷，而且可计算其局部失稳临界载荷。     

VIBRO-ACOUSTIC BEHAVIOR OF SUBMERGED CYLINDRICAL SHELLS: ANALYTICAL FORMULATION AND NUMERICAL MODEL

We propose both an analytical formulation and a numerical model to study the hydroelastic or vibroacoustic behaviour of cylindrical thin shells immersed in an unbounded, inviscid and heavy fluid. The analytical solution allows us to calculate the dynamic response and the pressure radiated in the far field by a baffled cylinder. This formulation uses the truncated modal basis of the dry structure to expand the displacements of the submerged shell. The analytical model is used as a reference in order to validate a numerical model which couples the finite element method (FEM) to the boundary element method (BEM). As opposed to the analytical formulation which is dedicated to baffled circular cylinders only, the numerical model allows us to treat any axisymmetric shell, such as cylindrical and spherical shells, or more complex shells of revolution. The structure is idealized by two-node ring finite elements and the boundary equation is solved using the method of singularities.     

Sound radiation of a functionally graded material cylindrical shell in water by mobility method

Based on the fundamental dynamic equations of functionally graded material (FGM) cylindrical shell, this paper investigates the sound radiation of vibrational FGM shell in water by mobility method. This model takes into account the exterior fluid loading due to the sound press radiated by the FGM shell. The FGM cylindrical shell was excited by a harmonic line radial force uniformly distributing along the generator. The FGM shell equations of motion, the Helmholtz equation in the exterior fluid medium and the continuity equation at fluid-shell interface are used in this vibroacoustic problem. The expressions of sound radiation efficiency and sound field of the FGM shell have been derived by mobility method. Radiation efficiency, modal mobility and the directivity pattern of the sound field are solved numerically. In particular, radiation efficiency and directivity pattern with various power law index are analyzed.     

Transient radiation by a submerged fluid-filled cylindrical shell

The radiation by a submerged fluid-filled cylindrical shell in response to a transient external pressure pulse is considered, and a semi-analytical model based on the Reissner–Mindlin shell theory is employed to simulate the interaction numerically. Two types of radiated waves that have been previously seen in experimental images for a submerged evacuated cylindrical shell are observed in both the external and internal fluids, the symmetric Lamb waves S₀ and the antisymmetric Lamb (or pseudo-Rayleigh) waves A₀. The third type of radiated waves is also observed that has not been explicitly imaged either experimentally or numerically for a submerged evacuated cylindrical shell, and it is demonstrated that these waves are the Scholte–Stoneley waves A. The effect that the complex structure of the radiated field has on the wave phenomena in the internal fluid is analyzed for shells of several different thicknesses, and the results of this analysis are summarized in the form of diagrams suitable for the use at the pre-design stage.     

同轴圆柱壳流固耦合附加质量研究

论文根据堆本体内窄间隙同轴设备支承筒的结构特征、边界条件和窄间隙环腔内流体流速,将结构简化为一端固定一端自由的同轴圆柱壳,将圆柱壳内外的流体简化为无旋、无黏、不可压缩流体.同轴圆柱壳通过流体压力场实现耦合,其径向位移模态决定了窄间隙流体域的压力场,故采用级数形式的圆柱壳径向正交位移模态构建既满足一端固定一端自由边界条件...     

具脱层轴对称层合圆柱壳的振动模态分析

对具环向贯穿脱层的轴对称层合圆柱壳进行振动模态分析.首先,采用Heaviside阶梯函数,构造了一种适合于脱层壳的位移模式.通过对脱层壳的能量分析,应用瑞利--里兹法后,得到用时间函数表示的系统振动控制方程,然后对其求解,得到脱层壳模态分析的特征方程式.算例中,讨论了不同的脱层位置、脱层大小和脱层深度对脱层壳振动模态的影响.     

MECHANICAL AND ACOUSTIC RESPONSE OF AN UNDERWATER STRUCTURE SUBJECTED TO MECHANICAL EXCITATION

In this paper, an underwater structure is modeled as a cylindrical shell with internal bulkheads, and closed by a truncated conical shell, and it consists of metal substrate and sound absorbing coating, whose FGM core is considered. Suppose the inner cavity and outer space of the structure are filled with air and fluid mediums, the mechanical response of the underwater structure is calculated with Galerkin method while the acoustic response is investigated by means of the Helmholtz integral. Some numerical examples are given and the effect of geometrical size and material parameters on mechanical and acoustic response is discussed.     

黏弹性层合悬臂薄壁圆柱壳的模态特性研究

基于薄壳理论和黏弹性理论, 得出了黏弹性层合悬臂薄壁圆柱壳模态特性的半解析解. 根据乐甫薄壳理论, 建立了基层和黏弹性阻尼层薄壁圆柱壳的一阶状态微分方程, 结合黏弹性阻尼层的变形协调关系和层间作用力关系, 利用传递矩阵法得出了整体结构的传递矩阵, 采用高精度的精细积分法得出了固有频率、模态损耗因子和三维模态振型, 最后通过有限元法进行了比较, 通过算例验证了传递矩阵法对黏弹性层合薄壁圆柱壳模态特性研究的有效性.     

Acoustic radiation from a submerged hollow FGM sphere

An exact study based on the linear theory of elasticity is presented for the steady-state sound radiation characteristics of an arbitrarily thick radially inhomogeneous elastic isotropic hollow sphere, immersed in and filled with ideal compressible fluids, and subjected to an arbitrary axisymmetric time-harmonic driving force at its internal surface. A modal state equation with variable coefficients is set up in terms of appropriate displacement and stress functions and their spherical harmonics by means of the laminated approximation approach. Taylor’s expansion theorem is subsequently employed to solve the modal state equation, ultimately calculating a global transfer matrix. Numerical results are presented for a water-submerged/air-filled steel/zirconia FGM hollow sphere under an axisymmetric distributed internal pressure force. The effects of shell wall thickness, the material compositional gradient, frequency, and subtended polar angle of the internal pressure force on the far-field radiated pressure directivity patterns as well as the total radiated power are examined. It is demonstrated that the material gradient can significantly change the acoustical characteristics of hollow inhomogeneous sphere, especially for thick shells at high excitation frequencies. Limiting cases are considered and good agreements with available results as well as with the computations made by using a finite element package are obtained.     

An alternative procedure for the non-linear vibration analysis of fluid-filled cylindrical shells

Using Donnell non-linear shallow shell equations in terms of the displacements and the potential flow theory, this work presents a qualitatively accurate low dimensional model to study the non-linear dynamic behavior and stability of a fluid-filled cylindrical shell under lateral pressure and axial loading. First, the reduced order model is derived taking into account the influence of the driven and companion modes. For this, a modal solution is obtained by a perturbation technique which satisfies exactly the in-plane equilibrium equations and all boundary, continuity, and symmetry conditions. Finally, the equation of motion in the transversal direction is discretized by the Galerkin method. The importance of each mode in the proposed modal expansion is studied using the proper orthogonal decomposition. The quality of the proposed model is corroborated by studying the convergence of frequency–amplitude relations, resonance curves, bifurcation diagrams, and time responses. The parametric analysis clarifies the influence of the lateral and axial loads on the non-linear vibrations and stability of the liquid-filled shell. Finally, the global response of the system is investigated in order to quantify the degree of safety of the shell in the presence of external perturbations through the use of bifurcation diagrams and basins of attraction. This allows one to evaluate the safety and dynamic integrity of the cylindrical shell in a dynamic environment.     

Boundary Integral Equations Method for the Analysis of Acoustic Scattering from Line-2 Elastic Targets

The prediction of the acoustic scattering from elastic structures is a recurrent problem of practical importance as, for example, in underwater detection and target identification. We aim at setting out the diffraction problem of a transient acoustic wave by an axisymmetric shell composed of a cylinder bounded by hemispherical endcaps, called Line-2. Its time-dependent response is expanded in terms of the resonance modes of the fluid-loaded structure. The latter are well suited when the structure is submerged in a heavy fluid: it is an alternative to modal methods whose expansions as series of natural modes of the in vacuo shell are much better for describing the interaction between a structure and a light fluid. The resonance frequencies are defined as solutions of the nonlinear eigenvalue problem described by the set of homogeneous equations governing the structure displacement coupled to the acoustic radiated pressure. The resonance modes of the coupled system are the corresponding eigenvectors. Both hemisphere and cylinder equations are modeled by the approximation of Donnel and Mushtari which governs thin shells oscillations. The modeling of the sound pressure by a hybrid potential integral representation leads to a system of integro-differential equations defined on the surface of the structure only (boundary integral equations). The unknowns, the hybrid potential density as well as the shell displacement vector, are developed into Fourier series with respect to the natural cylindrical coordinate. Each angular component of the unknown functions is then expanded as series of Legendre polynomials, the coefficients of which are calculated thanks to a Galerkin method derived from the energetic form of the equations. The whole method can also be applied to predict the response of the coupled structure to a harmonic or a random excitation. This revised version was published online in July 2006 with corrections to the Cover Date.