Green synthesis and enhanced photocatalytic activity of Ce-doped TiO2 nanoparticles supported on porous glass

A facile and green method to prepare Ce-doped TiO₂ nanoparticles supported on porous glass beads is reported. An ion exchange process and subsequent calcination yielded Ce-doped TiO₂ nanoparticles with a mean size of 4.8 ± 0.3 nm. The nanoparticles were dispersed on the surface of porous glass beads. The addition of Ce enhanced the visible light absorption of the TiO₂ nanoparticles in the 400–500 nm spectral window. The band gap of the as-prepared catalyst was 2.80 eV. The Ce-doped TiO₂ nanoparticles immobilized on porous glass beads exhibited excellent photocatalytic activity for the visible-light-degradation of methyl orange (MO) and rhodamine B (RhB); with rate constants of 0.095 and 0.230 min⁻¹; respectively. The effects of Ce dosage; reaction duration; and initial solution pH on the conversion of MO and RhB dyes were investigated. The green synthesis and favorable photocatalytic activity makes the Ce-doped TiO₂ nanoparticles immobilized on porous glass an attractive alternative for the efficient degradation of organic pollutants.     

A novel method for fast and continuous preparation of superfine titanium dioxide nanoparticles in microfluidic system

Previously we had developed a microfluidic system that can be easily fabricated by bending a stainless-steel tube into large circular loops. In this study, a fast and continuous preparation method for superfine TiO₂ nanoparticles (TiO₂-NPs) was developed for the aforementioned microfluidic system. The proposed method can yield anatase TiO₂ in 3.5 min, in contrast to the traditional hydrothermal reaction method, which requires hours or even days. Different reaction conditions, such as reaction temperature (120–200 °C), urea concentration (20–100 g/L), and tube length (5–20 m) were investigated. X-ray diffraction and Brunauer–Emmett–Teller analysis indicate that the as-prepared TiO₂-NPs have crystalline sizes of 4.1–5.8 nm and specific surface areas of 250.7–330.7 m²/g. Transmission electron microscopy images show that these TiO₂-NPs have an even diameter of approximately 5 nm. Moreover, because of their small crystalline sizes and large specific surface areas, most of these as-prepared TiO₂-NPs exhibit considerably better absorption and photocatalytic performance with methylene blue than commercial P5 TiO₂ does.     

Highly dispersed Mn2O3 microspheres: Facile solvothermal synthesis and their application as Li-ion battery anodes

Nanostructured transition metal oxides are promising alternative anodes for lithium ion batteries. Li-ion storage performance is expected to improve if high packing density energy particles are available. Herein, Mn₂O₃ microspheres with a ca. 18 μm diameter and a tapped density of 1.33 g/cm³ were synthesized by a facile solvothermal–thermal coversion route. Spherical MnCO₃ precursors were obtained through solvothermal treatment and they decomposed and converted into Mn₂O₃ microspheres at an annealing temperature of 700 °C. The Mn₂O₃ microspheres consisted of Mn₂O₃ nanoparticles with an average 40 nm diameter. These porous Mn₂O₃ microspheres allow good electrolyte penetration and provide an ion buffer reservoir to ensure a constant electrolyte supply. The Mn₂O₃ microspheres have reversible capacities of 590 and 320 mAh/g at 50 and 400 mA/g, respectively. We thus report an efficient route for the fabrication of energy particles for advanced energy storage.     

Capture of phosphates in surface water by TiO2 nanoparticles under UV irradiation

The capture of orthophosphates and total phosphorus from the Pudong Canal river in the Pudong District of Shanghai by TiO₂ nanoparticles is studied using a rotating photoreactor and the nano-TiO₂ photocatalyst Degussa P25. The effects of UV irradiation intensity in a range of 20–74 mW/cm², the loading of the TiO₂ nanoparticles in a range of 0.05–0.1 g/L, irradiation time up to 4 h, and pH values in a range of 2–10.5 on the capture efficiency are investigated. The results show that the capture of orthophosphates and total P are significantly enhanced by UV irradiation; at a loading of 0.1 g/L and an irradiation intensity above 36 mW/cm², orthophosphates and total phosphorus are rapidly captured by TiO₂ nanoparticles, causing an observed reduction from 0.4 mg/L down to 0.02 mg/L. pH values in a range of 2–10.5 have little effect on the capture efficiency of orthophosphates and total phosphorus.     

SiO2-coated pure anatase TiO2 catalysts for enhanced photo-oxidation of naphthalene and anthracene

Our current efforts reveal the preparation of SiO₂@TiO₂ nanocomposites having different thicknesses of silica shell and the relationship to photocatalytic activity (PCA) for the photo-oxidation of naphthalene and anthracene. The presence of SiO₂ coating over TiO₂ surface was demonstrated by FT-IR analysis, with peaks corresponding to SiOSi (1081 cm⁻¹) and SiOTi (950 cm⁻¹) bonds observed. High-resolution transmission electron microscopy analysis confirmed the presence of SiO₂ in the as-prepared nanocomposites and the amount of Si, Ti, and O was determined by energy dispersive X-ray spectroscopy analysis. Increasing the SiO₂ shell thickness increases the surface area of the nanocomposites (69–235 m²/g), which enhances naphthalene/anthracene adsorption. However, the observed PCA trend presents an inverse correlation to the adsorption studies, where the as-prepared samples possessing the highest surface areas exhibited the least PCA, while catalysts having lower surface areas (among silica coated samples) displayed the highest PCA in the degradation of naphthalene and anthracene to CO₂. Despite complete degradation of naphthalene and anthracene, incomplete mineralization occurred, ascribed to the formation of various intermediates, identified by GC–MS analysis.     

Preparation of 3D micro/nanostructured CeO2: Influence of organic/inorganic acids

CeO₂ is an important porous material with a wide range of applications in the abatement of volatile organic compounds (VOCs). In this paper, we prepared a series of novel three-dimensional (3D) micro/nanostructured CeO₂ materials via a solvothermal method. Organic acid-assisted synthesis and inorganic acid post-treatment were used to adjust the CeO₂ microstructures. The size of the 3D micro/nanostructures could be controlled in the range from 180 nm to 1.5 μm and the surface morphology changed from rough to smooth with the use of different organic acids. The CeO₂ synthesized with acetic acid featured a hierarchical porosity and showed good performance for toluene catalytic combustion: a T₅₀ of 187 °C and a T₉₀ of 195 °C. Moreover, the crystallite size, textural properties, and surface chemical states could be tuned by inorganic acid modification. After treatment with HNO₃, the modified CeO₂ materials exhibited improved catalytic activity, with a T₅₀ of ∼175 °C and a T₉₀ of ∼187 °C. We concluded that the toluene combustion activity is related to the porosity and the amount of surface active oxygen of the CeO₂. Both these features can be tuned by the co-work of organic and inorganic acids.     

2D reduced graphene oxide–titania nanocomposites synthesized under different hydrothermal conditions for treatment of hazardous organic pollutants

Two-dimensional reduced graphene oxide–titania (RGO–TiO₂) composites were prepared using a single-step hydrothermal method under various hydrothermal reaction conditions. The morphological and surface characteristics of the RGO–TiO₂ composites and reference materials were determined. The RGO–TiO₂ composites showed photocatalytic activity for the decomposition of two target pollutants that was superior to both pure TiO₂ and RGO under fluorescent daylight lamp illumination. The photocatalytic activity of the RGO–TiO₂ composite increased as the hydrothermal treatment time increased from 1 to 24 h, but then it decreased as the time increased to 36 h, which indicated the presence of an optimal treatment time. RGO–TiO₂ composites activated by violet light-emitting diodes (LEDs) displayed lower decomposition efficiency than those activated by a daylight lamp, likely because of the lower light intensity of violet LEDs (0.2 mW/cm²) when compared with that of the daylight lamp (1.4 mW/cm²). However, the photocatalytic decomposition of the target pollutants using the RGO–TiO₂ composite was more energy-efficient using the violet LEDs. The photocatalytic reaction rates increased as the residence time decreased, whereas the reverse was true for the decomposition efficiency.     

Large-scale synthesis of hierarchical MnO2 for benzene catalytic oxidation

Hierarchical sea-urchin-shaped manganese oxide microspheres were synthesized via a facile method based on the reaction between KMnO₄ and MnSO₄ in HNO₃ solution at 50 °C. The average diameter of the microspheres is ∼850 nm. The microspheres consist of a core of diameter of ∼800 nm and nanorods of width ∼50 nm. The nanorods exist at the edge of the core. The Brunauer–Emmett–Teller surface area of the sea-urchin-shaped microspheres is 259.4 m²/g. A possible formation mechanism of the hierarchical sea-urchin-shaped microspheres is proposed. The temperature for 90% conversion of benzene (T_90%) on the hierarchical urchin-shaped MnO₂ microspheres is about 218 °C.     

Observation and analysis of near-surface atmospheric aerosol optical properties in urban Beijing

Year-round measurements of the mass concentration and optical properties of fine aerosols (PM_2.5) from June 2009 to May 2010 at an urban site in Beijing were analyzed. The annual mean values of the PM_2.5 mass concentration, absorption coefficient (Ab), scattering coefficient (Sc) and single scattering albedo (SSA) at 525 nm were 67 ± 66 μg/m³, 64 ± 62 Mm⁻¹, 360 ± 405 Mm⁻¹ and 0.82 ± 0.09, respectively. The bulk mass absorption efficiency and scattering efficiency of the PM_2.5 at 525 nm were 0.78 m²/g and 5.55 m²/g, respectively. The Ab and Sc showed a similar diurnal variation with a maximum at night and a minimum in the afternoon, whereas SSA displayed an opposite diurnal pattern. Significant increases in the Ab and Sc were observed in pollution episodes caused by the accumulation of pollutants from both local and regional sources under unfavorable weather conditions. Aerosol loadings in dust events increased by several times in the spring, which had limited effects on the Ab and Sc due to the low absorption and scattering efficiency of dust particles. The frequency of haze days was the highest in autumn because of the high aerosol absorption and scattering under unfavorable weather conditions. The daily PM_2.5 concentration should be controlled to a level lower than 64 μg/m³ to prevent the occurrence of haze days according to its exponentially decreased relationship with visibility.     

Fabrication of nano-sized Ca(OH)2 with excellent adsorption ability for N2O4

Uniform nano-sized calcium hydroxide (Ca(OH)₂) monocrystal powder was synthesized from calcium oxide in a surfactant solution via a digestion method by decreasing the surface tension of the reaction system to control the growth of crystalline Ca(OH)₂. The Ca(OH)₂ monocrystal powder samples were characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), and Fourier transform-infrared spectroscopy (FT-IR). The NO_x adsorption ability of the samples was evaluated, and the influence of various types and concentrations of surfactants on powder agglomeration and then the specific surface area in the precipitation process were studied. The specific surface area of the samples was found as high as 58 m²/g and 92 m²/g and the particle size, 300–400 nm and 200–300 nm in the presence of 10 wt% PEG600 and 0.086 mL/L SDS at a reaction time of 5 h, respectively. The product has an exceptionally strong adsorption ability for NO_x, which makes it a highly promising adsorbent for emission control and air purification.     

Analysis of the causes of heavy aerosol pollution in Beijing,China: A case study with the WRF-Chem model

The causes and variability of a heavy haze episode in the Beijing region was analyzed. During the episode, the PM_2.5 concentration reached a peak value of 450 μg/kg on January 18, 2013 and rapidly decreased to 100 μg/kg on January 19, 2013, characterizing a large variability in a very short period. This strong variability provides a good opportunity to study the causes of the haze formation. The in situ measurements (including surface meteorological data and vertical structures of the winds, temperature, humidity, and planetary boundary layer (PBL)) together with a chemical/dynamical regional model (WRF-Chem) were used for the analysis. In order to understand the rapid variability of the PM_2.5 concentration in the episode, the correlation between the measured meteorological data (including wind speed, PBL height, relative humidity, etc.) and the measured particle concentration (PM_2.5 concentration) was studied. In addition, two sensitive model experiments were performed to study the effect of individual contribution from local emissions and regional surrounding emissions to the heavy haze formation. The results suggest that there were two major meteorological factors in controlling the variability of the PM_2.5 concentration, namely, surface wind speed and PBL height. During high wind periods, the horizontal transport of aerosol particles played an important role, and the heavy haze was formed when the wind speeds were very weak (less than 1 m/s). Under weak wind conditions, the horizontal transport of aerosol particles was also weak, and the vertical mixing of aerosol particles played an important role. As a result, the PBL height was a major factor in controlling the variability of the PM_2.5 concentration. Under the shallow PBL height, aerosol particles were strongly confined near the surface, producing a high surface PM_2.5 concentration. The sensitivity model study suggests that the local emissions (emissions from the Beijing region only) were the major cause for the heavy haze events. With only local emissions, the calculated peak value of the PM_2.5 concentration was 350 μg/kg, which accounted for 78% of the measured peak value (450 μg/kg). In contrast, without the local emissions, the calculated peak value of the PM_2.5 concentration was only 100 μg/kg, which accounted for 22% of the measured peak value.     

Hydrothermal preparation of nanocrystalline ZnO2

A green hydrothermal method was proposed for the synthesis of nanocrystalline ZnO₂, using Zn₅(CO₃)₂(OH)₆ powder and 6 vol% H₂O₂ aqueous solution as the starting materials. Characterization results from X-ray diffraction, Raman, high resolution transmission electron microscopy and selected area electron diffraction revealed that the products synthesized at 80–120 °C for 6–18 h were pure cubic phase ZnO₂ nanocrystals. Room temperature photoluminescence spectra of the as-synthesized ZnO₂ nanocrystals displayed a wide and strong emission band in the visible region of about 525–570 nm upon laser excitation at 325 nm, which may have originated from their surface state and other crystal defects.     

Hydrothermal synthesis of ultrathin hexagonal nickel hydroxide nanosheets

Nickel hydroxide, Ni(OH)₂ is widely used in electrodes of nickel-based alkaline secondary batteries. Ultrathin hexagonal Ni(OH)₂ nanosheets of space group P-3m1 were hydrothermally prepared at 200 °C for 10 h. Their diameter and thickness were 200–300 and 3–5 nm, respectively. Their formation was attributed to the oriented assembly of growing particles, which was assisted by surfactant molecules. The specific surface area of the Ni(OH)₂ nanosheets was 8.66 m²/g. Their magnetization curve exhibited linear paramagnetic behavior across the entire measurement region.     

Chemical characteristics of PM2.5 during dust storms and air pollution events in Chengdu,China

Daily fine particulate (PM_2.5) samples were collected in Chengdu from April 2009 to February 2010 to investigate their chemical profiles during dust storms (DSs) and several types of pollution events, including haze (HDs), biomass burning (BBs), and fireworks displays (FDs). The highest PM_2.5 mass concentrations were found during DSs (283.3 μg/m³), followed by FDs (212.7 μg/m³), HDs (187.3 μg/m³), and BBs (130.1 μg/m³). The concentrations of most elements were elevated during DSs and pollution events, except for BBs. Secondary inorganic ions (NO₃^?, SO₄^2?, and NH₄⁺) were enriched during HDs, while PM_2.5 from BBs showed high K⁺ but low SO₄^2?. FDs caused increases in K⁺ and enrichment in SO₄^2?. Ca²⁺ was abundant in DS samples. Ion-balance calculations indicated that PM_2.5 from HDs and FDs was more acidic than on normal days, but DS and BB particles were alkaline. The highest organic carbon (OC) concentration was 26.1 μg/m³ during FDs, followed by BBs (23.6 μg/m³), HDs (19.6 μg/m³), and DSs (18.8 μg/m³). In contrast, elemental carbon (EC) concentration was more abundant during HDs (10.6 μg/m³) and FDs (9.5 μg/m³) than during BBs (6.2 μg/m³) and DSs (6.0 μg/m³). The highest OC/EC ratios were obtained during BBs, with the lowest during HDs. SO₄^2?/K⁺ and TCA/SO₄^2? ratios proved to be effective indicators for differentiating pollution events. Mass balance showed that organic matter, SO₄^2?, and NO₃^? were the dominant chemical components during pollution events, while soil dust was dominant during DSs.     

Liquid phase heterogeneous photocatalytic ozonation of phenol in liquid–solid fluidized bed: Simplified kinetic modeling

The isotherms of original AC (activated carbon) and photocatalysts (TiO₂-AC) calcined at 500 °C for phenol were measured. The results showed a reversible adsorption of phenol onto both kinds of particles at 25 °C, and could be fitted well to the Freundlich adsorption equation for the dilute solution. Five oxidation processes, namely O₃, O₃/UV, O₃/UV/AC, O₂/UV/TiO₂ and O₃/UV/TiO₂, for phenol degradation in fluidized bed were evaluated and compared, and the photocatalytic ozonation was found to give the highest phenol conversion because of the combined actions of homogenous ozonation in the liquid phase, heterogeneous ozonation on the surface of the catalyst support, i.e. activated carbon, and heterogeneous photocatalytic oxidation on the TiO₂ catalyst surface. With the simplified kinetic model, photolytic ozonation was confirmed to predominantly take place on the particle surface in comparison with the heterogeneous and homogeneous photolytic ozonation. Additionally, the heterogeneous photocatalytic oxidation constant was found to be enhanced by 3.73 times in photocatlaytic ozonation process with ozone as the scavenger compared to the photocatalytic oxidation process with oxygen as the scavenger.     

In situ synthesis of CNTs/Fe–Ni/TiO2 nanocomposite by fluidized bed chemical vapor deposition and the synergistic effect in photocatalysis

Carbon nanotube (CNTs)/Fe–Ni/TiO₂ nanocomposite photocatalysts have been synthesized by an in situ fluidized bed chemical vapor deposition (FBCVD) method. The composite photocatalysts were characterized by XRD, Raman spectroscopy, BET, FESEM, TEM, UV–vis spectroscopy, and XPS. The results showed that the CNTs were grown in situ on the surface of TiO₂. Fe(III) in TiO₂ showed no chemical changes in the growth of CNTs. Ni(II) was partly reduced to metal Ni in the FBCVD process, and the metal Ni acted as a catalyst for the growth of CNTs. The photocatalytic activities of CNTs/Fe–Ni/TiO₂ decreased with the rise of the FBCVD reaction temperature. For the sample synthesized at low FBCVD temperature (500 °C), more than 90% and nearly 50% of methylene blue were removed under UV irradiation in 180 min and under visible light irradiation in 300 min, respectively. The probable mechanism of synergistic enhancement of photocatalysis on the CNTs/Fe–Ni/TiO₂ nanocomposite is proposed.     

Preparation of nano-sized Al2O3–2SiO2 powder by sol–gel plus azeotropic distillation method

Nano-sized amorphous Al₂O₃–2SiO₂ powder was prepared by a sol–gel method coupled with azeotropic distillation. The structure of the powder was investigated by DTS, BET, TEM, FT-IR, TG-DTA and XRD, showing that n-butanol azeotropic distillation could effectively remove water from the aluminosilicate gels and prevent the formation of hard agglomerates in the drying process. The average particle diameter of the powder was about 70 nm. The largest BET specific surface area of the powder was 669 m²/g. To examine the alkali-activation reactivity of the powder, alkali-activation tests were performed with the powder reacting with sodium silicate solution. The synthetic powder was found to be highly reactive.     

Visible light-driven photocatalysis of W,N co-doped TiO2

W, N co-doped TiO2 nanoparticles were synthesized by a sol-gel method. The prepared samples were characterized by X-ray diffraction （XRD）, field emission scanning electron microscopy （FE-SEM）, trans- mission electron microscopy （TEM）, Fourier transform infrared spectroscopy （FT-1R）, X-ray photoelectron spectroscopy （XPS） and diffuse reflectance spectrophotometry （DRS）. The results showed that the co- doped photocatalysts were essentially uniform spherical particles with the smallest particle size of 22.5 nm. Compared to un-doped TiO2, N-TiO2 and P-25, the absorption edge of the W, N co-doped TiO2 shifted to longer wavelength and its photocatalytic activity for degradation of methyl orange （MO） under Xe-lamp （350W） was higher.     

Drag reduction for liquid flow through micro-apertures

Pressure drops in the flow through micro-orifices and capillaries were measured for silicone oils, aqueous solutions of polyethylene glycol (PEG), and surfactant aqueous solutions. The diameter of micro-orifices ranged from 5 μm to 400 μm. The corresponding length/diameter ratio was from 4 to 0.05 and capillary diameters were 105 μm and 450 μm. The following results were obtained: silicone oils of 10^?6 m²/s and 10^?5 m²/s in kinematic viscosity generated a reduction of pressure drop (RPD), that is, drag reduction, similar to the RPD of water and a glycerol/water mixture reported in the previous paper by the present authors. When RPD occurred, the pressure drop (PD) of silicone oils of 10^?6 m²/s and 10^?5 m²/s had nearly the same magnitude. Namely, the difference in viscosity did not influence RPD. A 10³ ppm aqueous solution of PEG20000 provided almost the same PD as that of PEG8000 for the 400 μm to 15 μm orifices, but a greater PD than that of PEG8000 for the 10 μm to 5 μm orifices. A non-ionic surfactant and a cationic surfactant were highly effective in RPD compared with anionic surfactants: the non-ionic and cationic surfactant solutions had PD one order of magnitude lower than that of water under some flow conditions in the concentration range from 1 ppm to 10⁴ ppm, but the anionic surfactant solutions did not generate RPD except in the case of the smallest orifice of 5 μm in diameter. The PD of the non-ionic surfactant solution showed a steep rise at a Reynolds number (Re_t) for 400 μm to 15 μm orifices. The Re_t provides the relationship Re_t = K/D, where D is the orifice diameter, and K is a constant of 2 × 10^?2 m for the 100–20 μm orifices irrespective of liquid concentration. Capillary flow experiment revealed that the PEG, non-ionic and cationic surfactant solutions generated RPD also in a laminar flow through the capillary of 105 μm in diameter, but not in the flow through the capillary of 450 μm in diameter. In order to clarify the cause of RPD, an additional experiment was carried out by changing the orifice material from metal to acrylic resin. The result gave a different appearance of RPD, suggesting that RPD is related to an interfacial phenomenon between the liquid and wall. The large RPDs found in the present experiment are very interesting from both academic and practical viewpoints.     

Hydrothermal synthesis and physicochemical characterization of CuO/ZnO/Al2O3 nanopowder. Part I: Effect of crystallization time

A hydrothermal method was successfully used for synthesis of CuO/ZnO/Al₂O₃ (CZA) nanopowder with atomic ratio of 6:3:1. The effect of crystallization time (3, 6, 9, and 12 h) on physicochemical properties of nanopowder was investigated. Nanopowders were characterized using XRD, FESEM, EDX, FTIR, TG, and BET techniques. The XRD patterns confirmed metal oxides formation and their good crystallinity with average crystallite size of 20 nm as obtained by the Scherrer equation. Relative crystallinity was shown to increase with increasing crystallization time. In agreement with XRD results, FESEM images also illustrated nanosized particles. EDX mapping indicated homogenous dispersion of elements. BET specific surface area analysis showed acceptable surface area for CZA nanopowder. FTIR spectroscopy confirmed metal oxides formation during hydrothermal and calcination processing. TG results illustrated high thermal stability of the synthesized nanopowders. TG-DTG and FTIR analyses were used to propose a reaction mechanism for nanopowder formation during processing. Physicochemical characterization showed optimal crystallization time to be 6 h.