首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
FRP-混凝土界面剥离损伤的探测是界面力学分析的一个难点。基于三个标准试件探讨了红外检测方法对FRP-混凝土界面剥离探测的精度、可行性以及剥离判断的标准,并对常幅疲劳荷载下FRP加固钢筋混凝土(RC)梁界面的疲劳行为进行了跟踪记录,分析了界面的疲劳破坏过程。试验结果表明,FRP加固RC梁界面存在初始的未粘结区,在疲劳加载的初期界面剥离快速增加,随后在大部分疲劳寿命期内保持稳定,在最后数千次加载循环内界面损伤失稳发展导致整个加固构件的破坏。文中基于红外数据给出了每个阶段的疲劳加载次数和界面剥离损伤的面积。  相似文献   

2.
以10根采用钢板-混凝土组合加固技术加固的钢筋混凝土梁的试验为基础,建立了钢板-混凝土组合加固钢筋混凝土梁的非线性有限元模型.沿用了钢板-混凝土组合梁有限元分析中栓钉的荷载-滑移曲线及断裂模型,提出了新老混凝土界面的剪切-滑移模型,可以较好地模拟界面受力性能.采用有限元软件ABAQUS,模拟了一次加固、不同损伤加固及持载加固等加载情况下加固构件受力全过程和受弯破坏以及新老混凝土剥离破坏等破坏形态下加固试件的受力性能.在验证了有限元模型的准确性后,分析了钢板厚度、加固部分高度及长度等参数对加固构件承载能力及刚度的影响.最后提出了几点对钢板-混凝土组合加固RC梁的设计建议.  相似文献   

3.
纤维复合材料(FRP)加固混凝土梁跨中可能发生剥离破坏,研究者已提出几种计算FRP-混凝土粘结界面剪应力τ的方法,但所得结果有较大的差异.本文先通过典型的FRP-混凝土界面的粘结-滑移本构关系和FRP加固梁实验结果,评估既有计算方法存在的问题.进而提出一个简单的"梁段"有限元计算模型,并证实其合理性和可靠性.再用此模型计算讨论了多种参数影响下的FRP-混凝土界面剪应力τ分布特征.基于实验研究和有限元计算结果,指出FRP-混凝土界面剪应力最大值τu不适合作为剥离破坏准则,并建议考虑将滑移量最大值δ作为FRP-混凝土界面的剥离破坏准则.  相似文献   

4.
为了探究节点加强后RC梁柱节点的抗剪承载力、延性提高以及节点破坏模式由剪切破坏转变为梁弯曲破坏的实质,本文在RC节点的三维有限元分析的基础上探讨RC梁柱节点加强后的破坏机理。通过详细考察加固前后节点内部不同位置混凝土的应力-应变发展规律,探讨加强前后节点混凝土的宏观损伤发展过程;同时,通过考察核心混凝土的应力-应变关系及发展过程定量探讨加强钢板、梁柱主筋及箍筋对核心混凝土的约束作用。基于上述混凝土损伤过程的宏观分析,可以得出由于梁主筋的粘结加强、加强钢板以及箍筋对混凝土约束作用,使节点核心混凝土的实际强度增大、损伤延迟,RC节点由加强前的节点剪切破坏模式转变成梁端的弯曲破坏模式,从而提高RC梁柱节点的抗剪承载力和延性。  相似文献   

5.
预应力CFRP加固混凝土结构技术由于具有显著优势,越来越多地被应用在桥梁加固中,本文针对冻融循环作用下预应力CFRP板加固钢筋混凝土梁的耐久性能进行了实验研究。通过12片加固梁试件的实验研究了不同次数冻融循环作用下预应力CFRP板加固梁的破坏形态和承载性能,分析了混凝土强度等级、冻融循环次数、CFRP初始应力水平等因素对加固梁耐久性能的影响。实验结果表明:经历冻融循环后试件的开裂荷载和极限承载能力都有了不同程度的下降,冻融侵蚀对CFRP加固混凝土结构产生了明显的不利影响;随着冻融循环次数的增加,加固试件的破坏模式逐渐由混凝土保护层剥离转变为界面剥离的破坏形态;冻融循环作用对预应力加固试件的整体不利影响要大于非预应力试件;混凝土强度为C60的预应力CFRP加固试件在冻融侵蚀作用下的退化要较强度为C30的加固试件显著。  相似文献   

6.
为了研究纤维增强聚合物(fiber reinforced polymer, FRP) 加固梁的FRP-混凝土界面脱胶破坏过程,本文将混凝土梁和FRP 板均视为线弹性的欧拉-伯努利梁(Euler-Bernoulli beams), 且两者通过粘结层胶结在一起. 对于FRP-混凝土结构,有两种形式的脱胶破坏:板端脱胶破坏和跨中裂缝导致的脱胶破坏.对于FRP-混凝土梁,利用合理的粘结模型按第2 种脱胶失效形式,详细讨论了FRP-混凝土界面的脱胶过程,得到了不同阶段的胶结滑移、界面剪应力和FRP 轴向力的解析解. 实验研究验证了理论分析的结果,参数研究进一步探讨了胶结长度和粘结层厚度对于FRP-混凝土界面脱胶行为的影响.  相似文献   

7.
不同于混凝土材料,钢筋混凝土(RC)构件的破坏模式与机制更为复杂,采用混凝土材料尺寸效应理论难以描述构件的尺寸效应行为。我国相关规范中并没有系统考虑构件尺寸及纵筋率对RC梁抗剪承载力的影响。为研究剪跨比及纵筋率对无腹筋RC梁剪切破坏及抗剪强度尺寸效应的影响,采用三维细观数值模拟方法,建立了RC梁剪切破坏力学分析模型,研究了剪跨比及纵筋率对RC梁剪切破坏及抗剪强度尺寸效应的影响机制与规律。研究结果表明,RC梁抗剪强度表现出极为显著的尺寸效应现象;RC梁抗剪强度随剪跨比的增大而减小,随纵筋率的增大而增大;剪跨比较小时,纵筋率对抗剪强度的影响尤为显著。此外,基于Ba■ant材料层次尺寸效应律,提出了考虑剪跨比及纵筋率影响的RC梁抗剪强度尺寸效应理论公式。对比试验结果,验证了所提公式的准确性与合理性。  相似文献   

8.
采用解析和数值方法研究FRP-混凝土杂交梁的界面应力问题。提出了杂交梁的新的力学模型和假设,克服了以往的分析模型中界面应力表达式非常复杂和界面应力的解析解与数值解相差较大的缺点,本文得到的FRP板加固梁的界面剪应力表达式与数值结果符合很好,并且具有简捷的表达式。利用有限元法研究了杂交梁各物理参数对界面剪应力的影响。研究表明,界面剪应力在FRP板的端部存在应力集中或应力奇性,这是造成杂交梁界面破坏的主要原因。这项研究对进行杂交结构的工程设计具有理论指导和参考价值。  相似文献   

9.
纤维布抗弯加固梁跨中剥离应力的近似计算   总被引:2,自引:0,他引:2  
首先综述了纤维复合材料(FRP)抗弯加固梁中防剥离破坏的各种措施,分析了跨中混凝土保护层的剥离破坏机理,提出一个近似计算跨中保护层剥离应力上限的方法,可供防剥离设计参考。  相似文献   

10.
选取典型的钢筋混凝土(RC)深梁受剪试验,开发并运用三维刚体弹簧元法(3D RBSM)模拟了大尺寸截面深梁的受剪破坏过程,以及箍筋对深梁抗剪性能的影响。结果表明,3D RBSM不仅能够较准确地计算RC深梁的开裂荷载、名义抗剪强度以及箍筋的增强作用,而且能够模拟裂缝的开展以及构件的破坏。相比于有限元法,3D RBSM具有以下优势:大幅度提高了名义抗剪强度的计算精度,实现了散布裂缝模拟的可视化以及混凝土裂缝宽度的直观、定量评价;能够更好地捕捉峰值荷载后的软化行为。因此,3D RBSM为大尺寸截面深梁的受剪破坏模拟、明晰抗剪性能尺寸效应机理和完善大尺寸RC构件设计提供了有效研究手段。  相似文献   

11.
韩文娟  刘海 《力学与实践》2010,32(4):109-111
对《力学》中的物体自由度进行多方面分析,以深化教学、提高学生正 确分析物理问题的能力.使用实际教学分析的研究方法,在《力学》范围内讨论自由度与坐标、 自由与约束的关系并得以下结论: (1) 同一物体的自由度随其所在的``空间'不同而不同, 不因坐标系的选取不同而 异, 在同类参考系中不因参考系的动静而有别;(2)自由度遵循叠加原理. 讨论了质点系的总自由度及相关计算问题,并指出研究《力学》中自由度的意义.  相似文献   

12.
The present paper deals with development and design of new methods utilizing Wiedemann's effect for determination of state of strain in building structures. Wiedemann's effect and some features of torsional strain of magnetic field are the basis of new experimental method. Especially the point electromagnetic strain gages using the effect of pure torsion of electromagnetic field to enable universal examination. For strain-gage measurements, almost all physical quantities are used which can be related to the variation in length of the structures. From the electric strain measurements, the most commonly used methods are the measurements by resonance-wire strain gages or by electric-resistance strain gages. In this paper, electromagnetic strain gages are discussed using the Wiedemann effect, and the author describes some new measuring equipment and his own suggestions and methods based on an application of this effect.  相似文献   

13.
14.
15.
16.
It is well known that the problem on nonseparating potential flow of an incompressible fluid about an array of profiles reduces to an integral equation for a certain real function, determined on the contours of the profiles of the array. As such a function one can take, as was done, for instance, in [1–5], the relative velocity of the fluid on the profiles of the array. For arrays of profiles of arbitrary shape it is necessary to solve the corresponding integral equation numerically. In the particular examples of the calculation of aerodynamic arrays that are available [1–3] the numerical methods used were based on the approximate evaluation of contour integrals by rectangle formulas. As investigations showed, sizeable errors arose thereby in the approximate solution obtained, these being especially significant in the case of curved profiles of relatively small bulk. In the present paper a method for the numerical solution of the integral equation obtained in [5] is proposed. The method is based on the replacement of a profile of the array with an inscribed N polygon, the length of whose sides is of the order N–1 and whose internal angles are close to . Convergence with increasing N of the numerical solution to an exact solution of the integral equations at the reference points is demonstrated. Examples of the calculation are given.Novosibirsk. Translated from Izvestiya Akademii Nauk SSSR. Mekhanika Zhidkosti i Gaza, No. 2, pp. 105–112, March–April, 1972.  相似文献   

17.
18.
The exact solutions of the nonlinear equations of filtration of an aerated liquid have been obtained in [1–3]. In [4] the system of equations of an aerated liquid have been reduced to the heat-conduction equation under certain assumptions. An approximate method of computing the nonsteady flow of an aerated liquid is given in [5], where the real flow pattern is replaced by a computational scheme of successive change of stationary states. In [6] the same problem is solved by the method of averaging. In the present article estimates of the solution of the equations for nonstationary filtration of an aerated liquid in one-dimensional layer are constructed under certain conditions imposed on the desired functions. These estimates can be used as approximate solutions with known error or for the verification of the accuracy of different approximate methods. We note that the use of comparison theorem for the estimate of solutions of equations of nonlinear filtration is discussed in [7–9]. The methods of constructing estimates of solutions of various problems of heat conduction are given in [10, 11]  相似文献   

19.
20.
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号