Modelling the behaviour of polycrystalline austenitic steel with twinning-induced plasticity effect

A micromechanical model using the scale transition method in elastoviscoplasticity has been developed to describe the behaviour of those austenitic steels that display a TWIP effect. A physically based constitutive equation at the grain scale is proposed considering two inelastic strain modes: crystallographic slip and twinning. The typical organizations of microtwins observed in electron microscopy are considered, and the twin–slip as well as the twin–twin interactions are accounted for. The parameters for slip are first fitted on the uniaxial tensile response obtained at intermediate temperatures (when twinning is inhibited). Then, the parameters associated with twinning are identified using the stress–strain curve at room temperature. The simulated results in both macro and micro scales are in good agreement with experimentally obtained results.     

Incorporation of twinning into a crystal plasticity finite element model: Evolution of lattice strains and texture in Zircaloy-2

A crystal plasticity finite element code is developed to model lattice strains and texture evolution of HCP crystals. The code is implemented to model elastic and plastic deformation considering slip and twinning based plastic deformation. The model accounts for twinning reorientation and growth. Twinning, as well as slip, is considered to follow a rate dependent formulation. The results of the simulations are compared to previously published in situ neutron diffraction data. Experimental results of the evolution of the texture and lattice strains under uniaxial tension/compression loading along the rolling, transverse, and normal direction of a piece of rolled Zircaloy-2 are compared with model predictions. The rate dependent formulation introduced is capable of correctly capturing the influence of slip and twinning deformation on lattice strains as well as texture evolution.     

A cyclic plasticity model for single crystals

The Armstrong–Frederick type kinematic hardening rule was invoked to capture the Bauschinger effect of the cyclic plastic deformation of a single crystal. The yield criterion and flow rule were built on individual slip systems. Material memory was introduced to describe strain range dependent cyclic hardening. The experimental results of copper single crystals were used to evaluate the cyclic plasticity model. It was found that the model was able to accurately describe the cyclic plastic deformation and properly reflect the dislocation substructure evolution. The well-known three distinctive regimes in the cyclic stress–strain curve of the copper single crystals oriented for single slip can be reproduced by using the model. The model can predict the enhanced hardening for crystals oriented for multislip, showing the model's ability to describe anisotropic cyclic plasticity. For a given loading history, the model was able to capture not only the saturated stress–strain response but also the detailed transient stress–strain evolution. The model was used to predict the cyclic plasticity under a high–low loading sequence. Both the stress–strain responses and the microstructural evolution can be appropriately described through the slip system activation.     

Micromechanical modelling of the effect of plastic deformation on the mechanical behaviour in pseudoelastic shape memory alloys

Except for the recoverable strain induced by phase transformation, NiTi alloys are very ductile even in the martensite phase. The purpose of the present paper is to study the influence of permanent deformation, which results from plastic deformation of martensite, on the mechanical behaviour of pseudoelastic NiTi alloys. Based on phenomenological theory of martensitic transformation and crystal plasticity, a new three dimensional micromechanical model is proposed by coupling both the slip and twinning deformation mechanisms. The present model is implemented as User MATerial subroutine (UMAT) into ABAQUS/Standard to study the influences of plastic deformation on the stress and strain fields, and on the evolution of martensite transformation. Results show that with the increasing of plastic deformation the residual strain increases and the phase transformation stress–strain curves from the martensite to austenite become steeper and less obvious. Both characteristics, stabilisation of martensite and impedance of the reverse transformation, due to plastic deformation are captured.     

A dislocation-based constitutive law for pure Zr including temperature effects

In this work, a single crystal constitutive law for multiple slip and twinning modes in single phase hcp materials is developed. For each slip mode, a dislocation population is evolved explicitly as a function of temperature and strain rate through thermally-activated recovery and debris formation and the associated hardening includes stage IV. A stress-based hardening law for twin activation accounts for temperature effects through its interaction with slip dislocations. For model validation against macroscopic measurement, this single crystal law is implemented into a visco-plastic-self-consistent (VPSC) polycrystal model which accounts for texture evolution and contains a subgrain micromechanical model for twin reorientation and morphology. Slip and twinning dislocations interact with the twin boundaries through a directional Hall–Petch mechanism. The model is adjusted to predict the plastic anisotropy of clock-rolled pure Zr for three different deformation paths and at four temperatures ranging from 76 K to 450 K (at a quasi-static rate of 10⁻³ 1/s). The model captures the transition from slip-dominated to twinning-dominated deformation as temperature decreases, and identifies microstructural mechanisms, such as twin nucleation and twin–slip interactions, where future characterization is needed.     

A finite strain elastic-viscoplastic self-consistent model for polycrystalline materials

A large strain elastic-viscoplastic self-consistent (EVPSC) model for polycrystalline materials is developed. At single crystal level, both the rate sensitive slip and twinning are included as the plastic deformation mechanisms, while elastic anisotropy is accounted for in the elastic moduli. The transition from single crystal plasticity to polycrystal plasticity is based on a completely self-consistent approach. It is shown that the differences in the predicted stress-strain curves and texture evolutions based on the EVPSC and the viscoplastic self-consistent (VPSC) model proposed by Lebensohn and Tomé (1993) are negligible at large strains for monotonic loadings. For the deformations involving unloading and strain path changes, the EVPSC predicts a smooth elasto-plastic transition, while the VPSC model gives a discontinuous response due to lack of elastic deformation. It is also demonstrated that the EVPSC model can capture some important experimental features which cannot be simulated by using the VPSC model.     

Micromechanical quantification of elastic,twinning, and slip strain partitioning exhibited by polycrystalline,monoclinic nickel–titanium during large uniaxial deformations measured via in-situ neutron diffraction

We draw upon existing knowledge of twinning and slip mechanics to develop a diffraction analysis model that allows for empirical quantification of individual deformation mechanisms to the macroscopic behaviors of low symmetry and phase transforming crystalline solids. These methods are applied in studying elasticity, accommodation twinning, deformation twinning, and slip through neutron diffraction data of tensile and compressive deformations of monoclinic NiTi to ~18% true strain. A deeper understanding of tension–compression asymmetry in NiTi is gained by connecting crystallographic calculations of polycrystalline twinning strains with in situ diffraction measurements. Our analyses culminate in empirical, micromechanical quantification of individual elastic, accommodation twinning, deformation twinning, and slip contributions to the total macroscopic stress–strain response of a monoclinic material subjected to large deformations. From these results, we find that 20–40% of the total plastic response at high strains is due to deformation twinning and 60–80% due to slip.     

A dislocation density based crystal plasticity finite element model: Application to a two-phase polycrystalline HCP/BCC composites

We present a multiscale model for anisotropic, elasto-plastic, rate- and temperature-sensitive deformation of polycrystalline aggregates to large plastic strains. The model accounts for a dislocation-based hardening law for multiple slip modes and links a single-crystal to a polycrystalline response using a crystal plasticity finite element based homogenization. It is capable of predicting local stress and strain fields based on evolving microstructure including the explicit evolution of dislocation density and crystallographic grain reorientation. We apply the model to simulate monotonic mechanical response of a hexagonal close-packed metal, zirconium (Zr), and a body-centered cubic metal, niobium (Nb), and study the texture evolution and deformation mechanisms in a two-phase Zr/Nb layered composite under severe plastic deformation. The model predicts well the texture in both co-deforming phases to very large plastic strains. In addition, it offers insights into the active slip systems underlying texture evolution, indicating that the observed textures develop by a combination of prismatic, pyramidal, and anomalous basal slip in Zr and primarily {110}〈111〉 slip and secondly {112}〈111〉 slip in Nb.     

Characterization of yielding behavior of polycrystalline metals with single crystal plasticity based on representative characteristic length

Single crystal plasticity based on a representative characteristic length is proposed and introduced into a homogenization approach based on finite element analyses, which are applied to characterization of distinctive yielding behaviors of polycrystalline metals, yield-point elongation, and grain size strengthening. The computational manner for an implicit stress update is derived with the framework of a standard multi-surface plasticity at finite strain, where the evolution of the characteristic lengths are numerically converted from the accumulated slips of all of slip systems by exploiting the mathematical feature of the characteristic length as the intermediate function of the plastic internal variables. Furthermore, a constitutive model for a single crystal reproduces the stress–strain curve divided into three parts. Using two-scale finite element analysis, the macroscopic stress–strain response with yield-point elongation under a situation of low dislocation density is reproduced. Finally, the grain size effect on the yield strength is analyzed with modeling of the grain boundary in the context of the proposed constitutive model and is discussed from both macroscopic and microscopic views.     

Crystal plasticity finite element modeling of mechanically induced martensitic transformation (MIMT) in metastable austenite

A new crystal plasticity model incorporating the mechanically induced martensitic transformation in metastable austenitic steel has been formulated and implemented into the finite element analysis. The kinetics of martensite transformation is modeled by taking into consideration of a nucleation-controlled phenomenon, where each potential martensitic variant based on Kurdjumov–Sachs (KS) relationship has different nucleation probability as a function of the interaction energy between externally applied stress and lattice deformation. Therefore, the transformed volume fractions are determined following selective variants given by the crystallographic orientation of austenitic matrix and applied stress in the frame of the crystal plasticity finite element. The developed finite element program is capable of considering the effect of volume change by the Bain deformation and the lattice-invariant shear during the martensitic transformation by effectively modifying the evolution of plastic deformation gradient of the conventional rate-dependent crystal plasticity finite element. The validation of the proposed model has been carried out by comparing with the experimentally measured data under simple loading conditions. Good agreements with the measurements for the stress–strain responses, transformed martensitic volume fractions and the influence of strain rate on the deformation behavior will enable the model to be promising for the future applications to the real forming process of the TRIP aided steel.     

On the coupling of plastic slip and deformation-induced twinning in magnesium: A variationally consistent approach based on energy minimization

The present paper is concerned with the analysis of the deformation systems in single crystal magnesium at the micro-scale and with the resulting texture evolution in a polycrystal representing the macroscopic mechanical response. For that purpose, a variationally consistent approach based on energy minimization is proposed. It is suitable for the modeling of crystal plasticity at finite strains including the phase transition associated with deformation-induced twinning. The method relies strongly on the variational structure of crystal plasticity theory, i.e., an incremental minimization principle can be derived which allows to determine the unknown slip rates by computing the stationarity conditions of a (pseudo) potential. Phase transition associated with twinning is modeled in a similar fashion. More precisely, a solid-solid phase transition corresponding to twinning is assumed, if this is energetically favorable. Mathematically speaking, the aforementioned transition can be interpreted as a certain rank-one convexification. Since such a scheme is computationally very expensive and thus, it cannot be applied to the analysis of a polycrystal, a computationally more efficient approximation is elaborated. Within this approximation, the deformation induced by twinning is decomposed into the reorientation of the crystal lattice and simple shear. The latter is assumed to be governed by means of a standard Schmid-type plasticity law (pseudo-dislocation), while the reorientation of the crystal lattice is considered, when the respective plastic shear strain reaches a certain threshold value. The underlying idea is in line with experimental observations, where dislocation slip within the twinned domain is most frequently seen, if the twin laminate reaches a critical volume. The resulting model predicts a stress-strain response in good agreement with that of a rank-one convexification method, while showing the same numerical efficiency as a classical Taylor-type approximation. Consequently, it combines the advantages of both limiting cases. The model is calibrated for single crystal magnesium by means of the channel die test and finally applied to the analysis of texture evolution in a polycrystal. Comparisons of the predicted numerical results to their experimental counterparts show that the novel model is able to capture the characteristic mechanical response of magnesium very well.     

孪生诱发塑性对V-5Cr-5Ti合金应变硬化行为的影响

钒合金(V-Cr-Ti)作为潜在重要的聚变反应堆用结构材料, 近年来受到广泛的关注. 为了研究 V-5Cr-5Ti 合金不同应变率压缩下的应变硬化行为, 特别是孪生对塑性变形的影响, 以位错密度和孪晶演化为基础, 建立了该合金的应变硬化模型. 模型中考虑了孪晶中的位错滑移对材料塑性应变的贡献. 模拟结果表明, 由于孪生诱发塑性, 从而使动态压缩时的位错密度小于准静态加载时的, 这使得 V-5Cr-5Ti 合金在动态压缩时的应变硬化率比准静态加载时的小. 当孪晶形成后, 位错滑移引起的塑性应变率随应变增大而增大, 并逐渐接近加载应变率, 而孪生引起的塑性应变率则随应变增大而减小.      

Orientation evolution in Hadfield steel single crystals under combined slip and twinning

The tensile deformation response and texture evolution of aluminum alloyed Hadfield steel single crystals oriented in the 〈1 6 9〉 direction is investigated. In this material, the strain hardening response is governed by the high-density dislocation walls (HDDWs) that interact with glide dislocations. A microstructure-based visco-plastic self-consistent model was modified to account for mechanical twinning in addition to the prevailing contribution of the HDDWs. Simulations revealed the contribution of twinning to the overall work hardening at the later stages of deformation. Moreover, both the deformation response and the rotation of the loading axis associated with plastic flow are successfully predicted even at the high-strain levels attained (0.53). Predicting the texture evolution serves as a separate check for validating the model, motivating its utilization in single and polycrystals of other alloys that exhibit combined HDDWs and twinning.     

Continuum modeling of the response of a Mg alloy AZ31 rolled sheet during uniaxial deformation

Lightweight magnesium alloys, such as AZ31, constitute alternative materials of interest for many industrial sectors such as the transport industry. For instance, reducing vehicle weight and thus fuel consumption can actively benefit the global efforts of the current environmental industry policies. To this end, several research groups are focusing their experimental efforts on the development of advanced Mg alloys. However, comparatively little computational work has been oriented towards the simulation of the micromechanisms underlying the deformation of these metals. Among them, the model developed by Staroselsky and Anand [Staroselsky, A., Anand, L., 2003. A constitutive model for HCP materials deforming by slip and twinning: application to magnesium alloy AZ31B. International Journal of Plasticity 19 (10), 1843–1864] successfully captured some of the intrinsic features of deformation in Magnesium alloys. Nevertheless, some deformation micromechanisms, such as cross-hardening between slip and twin systems, have been either simplified or disregarded. In this work, we propose the development of a crystal plasticity continuum model aimed at fully describing the intrinsic deformation mechanisms between slip and twin systems. In order to calibrate and validate the proposed model, an experimental campaign consisting of a set of quasi-static compression tests at room temperature along the rolling and normal directions of a polycrystalline AZ31 rolled sheet, as well as an analysis of the crystallographic texture at different stages of deformation, has been carried out. The model is then exploited by investigating stress and strain fields, texture evolution, and slip and twin activities during deformation. The flexibility of the overall model is ultimately demonstrated by casting light on an experimental controversy on the role of the pyramidal slip 〈c + a〉 versus compression twinning in the late stage of polycrystalline deformation, and a failure criterion related to basal slip activity is proposed.     

Numerical modeling of formability of extruded magnesium alloy tubes

In this paper, a constitutive framework based on a rate-dependent crystal plasticity theory is employed to simulate the large strain deformation phenomena in hexagonal closed-packed (HCP) metals such as magnesium. The new framework is incorporated into in-house codes. Simulations are performed using the new crystal plasticity model in which crystallographic slip and deformation twinning are the principal deformation mechanisms. Simulations of various stress states (uniaxial tension, uniaxial compression and the so-called ring hoop tension test) for the magnesium alloy AM30 are performed and the results are compared with experimental observations of specimens deformed at 200 °C. Numerical simulations of forming limit diagrams (FLDs) are also performed using the Marciniak–Kuczynski (M–K) approach. With this formulation, the effects of crystallographic slip and deformation twinning on the FLD can be assessed.     

A continuum model for initiation and evolution of deformation twinning

Within continuum dislocation theory the plastic deformation of a single crystal with one active slip system under plane-strain constrained shear is investigated. By introducing a twinning shear into the energy of the crystal, we show that in a certain range of straining the formation of deformation twins becomes energetically preferable. An energetic threshold for the onset of twinning is determined. A rough analysis qualitatively describes not only the evolving volume fractions of twins but also their number during straining. Finally, we analyze the evolution of deformation twins and of the dislocation network at non-zero dissipation. We present the corresponding stress-strain hysteresis, the evolution of the plastic distortion, the twin volume fractions and the dislocation densities.     

Spatio-temporal characteristics of the Portevin–Le Châtelier effect in austenitic steel with twinning induced plasticity

An experimental investigation of spatio-temporal characteristics of the Portevin–Le Châtelier (PLC) effect in austenitic steel with twinning induced plasticity (TWIP) is presented. Post-processing of high resolution digital images captured from specimens in quasi-static, room temperature tensile tests was conducted with a digital image correlation (DIC) method. This provided direct measurement of strain fields during all stages of the tests. Variable rate digital image capture, enabled with a custom image acquisition algorithm, guaranteed a suitable number of images recorded during serrations in load–time records. Nucleation, propagation, and morphology of individual PLC bands in both straight gage and tapered specimens were quantified with strain rate contours computed with a backward differentiation scheme. Time histories of strain evolution in the PLC band wakes were extracted from cumulative strain contours. Of the three types of PLC bands, only the continuously propagating Type A bands were observed. Band nucleation, which occurred at serration crests in flow curves derived from the DIC results, was not limited to regions of geometry-induced stress concentrations. Due to its importance in finite element springback predictions and to support theoretical model development of inelastic behavior in TWIP steel, we measured Young’s modulus variation with strain in periodic loading–unloading tests. Implications of the experimental results for theoretical modeling of the PLC effect in TWIP steel are discussed.