Evolution of the E structural unit during uniaxial and constrained tensile deformation

Molecular dynamics simulations are used to study the mechanisms by which Shockley partial dislocations are nucleated from 1 1 0 copper grain boundaries which contain the E structural unit. Simulations in this work indicate that the natural conformation of the interface porosity with respect to the primary dislocation slip systems is responsible for the easy emission of Shockley partial dislocations during a tensile deformation. Furthermore, it is found that tensile stresses parallel to the interface plane can diminish the severity of the E structural unit on the dislocation nucleation process.     

High-order LES of turbulent heat transfer in a rotor–stator cavity

The present work examines the turbulent flow in an enclosed rotor–stator system subjected to heat transfer effects. Besides their fundamental importance as three-dimensional prototype flows, such flows arise in many industrial applications but also in many geophysical and astrophysical settings. Large eddy simulations (LES) are here performed using a spectral vanishing viscosity technique. The LES results have already been favorably compared to velocity measurements in the isothermal case (Séverac, E., Poncet, S., Serre, E., Chauve, M.P., 2007. Large eddy simulation and measurements of turbulent enclosed rotor–stator flows. Phys. Fluids, 19, 085113) for a large range of Reynolds numbers 10⁵Re=Ωb²/ν10⁶, in an annular cavity of large aspect ratio G=(b-a)/H=5 and weak curvature parameter R_m=(b-a)/(b+a)=1.8 (a,b the inner and outer radii of the rotor and H the interdisk spacing). The purpose of this paper is to extend these previous results in the non-isothermal case using the Boussinesq approximation to take into account the buoyancy effects. Thus, the effects of thermal convection have been examined for a turbulent flow Re=10⁶ of air in the same rotor–stator system for Rayleigh numbers up to Ra=10⁸. These LES results provide accurate, instantaneous quantities which are of interest in understanding the physics of turbulent flows and heat transfers in an interdisk cavity. Even at high Rayleigh numbers, the structure of the iso-values of the instantaneous normal temperature gradient at the disk surfaces resembles the one of the iso-values of the tangential velocity with large spiral arms along the rotor and more thin structures along the stator. The averaged results show small effects of density variation on the mean and turbulent fields. The turbulent Prandtl number is a decreasing function of the distance to the wall with 1.4 close to the disks and about 0.3 in the outer layers. The local Nusselt number is found to be proportional to the local Reynolds number to the power 0.7. The evolution of the averaged Bolgiano length scale L_B with the Rayleigh number indicates that temperature fluctuations may have a large influence on the dynamics only at the largest scales of the system for Ra10⁷, since L_B remains lower than the thermal boundary layer thicknesses.     

Effect of dislocation structure on fracture toughness of strained BCC-metals

Mechanical properties of materials depend on their structure. Examined are the effects of dislocation structure on fracture toughness and mechanisms of fracture of BCC-metals. Fracture toughness was determined by depending specimens with cracks introduced into the plane perpendicular to the plane of rolling. Fracture toughness increases with decreasing yield stress (for =15–25%). This is due to instability of slightly misoriented cell structure under repeated loading. The peak of fracture toughness at the temperature 77 K was not observed. The increase of fracture toughness for high strained metals (>60% for Mo, and >85% for Cr) corresponds to cell size reduction and the change of fracture mechanisms.     

Radiation and hot electron temperature measurements of short-pulselaser driven hohlraums

We have performed measurements of the radiation and the hot electron temperature in sub-millimetre size hohlraums driven by a high intensity short-pulse laser. The results indicate that radiation temperatures 80 eV can be obtained with 20 J of laser energy delivered on target. Radiation-hydrodynamics simulations indicate an absorption into thermal X-rays of 1–2%, with peak temperatures similar to those measured experimentally.     

Dynamical stability of the response of oscillators with discontinuous or steep first derivative of restoring characteristic

The influence of factors which can lead to incorrect prediction of dynamical stability of the periodic response of oscillators which contain a non-linear restoring characteristic with discontinuous or steep first derivative is considered in this paper. For that purpose, a simple one degree-of-freedom system with a piecewise-linear force-displacement relationship subjected to a harmonic excitation is analysed. Stability of the periodic response obtained in the frequency domain by the incremental harmonic balance method is determined by using the Floquet–Liapounov theorem. Responses in the time domain are obtained by digital simulation. The accuracy of determining the eigenvalues of the monodromy matrix (in the considered example) significantly depend on the corrective vector norm r , the accuracy of numerical determination of the times when the system undergoes a stiffness change, and on the number of step functions M (used in the Hsu's procedure), only for r >1×10⁻⁵,>1×10⁻⁵ and M<2000. Otherwise, except if the maximum modulus of the eigenvalues of the monodromy matrix is very close to unity, their influence on estimation of dynamical stability is minor. On the contrary, neglecting very small harmonic terms of the actual time domain response can cause a very large error in the evaluation of the eigenvalues of the monodromy matrix, and so they can lead to incorrect prediction of the dynamical stability of the solution, regardless of whether the maximum modulus of the eigenvalues of the monodromy matrix is close to unity or not.     

Effective flow of a viscous liquid through a helical pipe

We study the flow of a viscous fluid through a pipe with helical shape parameterized with , where the small parameter stands for the distance between two coils of the helix. The pipe has small cross-section of size . Using the asymptotic analysis of the microscopic flow described by the Navier–Stokes system, with respect to the small parameter that tends to zero, we find the effective fluid flow described by an explicit formula of the Poisseuile type including a small distorsion due to the particular geometry of the pipe. To cite this article: E. Marušić-Paloka, I. Pažanin, C. R. Mecanique 332 (2004).

Résumé

On considère un écoulement dans un tube de section circulaire et de forme hélicoïdale paramétré par , où est la distance entre deux tours de la spirale. Le rayon de la section du tube est lui aussi supposé égal à . A partir de l'écoulement microscopique décrit par le système de Navier–Stokes et en utilisant l'analyse asymptotique par rapport à ce petit paramètre on obtient l'écoulemment effectif décrit par une formule explicite de type Poiseuille associée à une petite déviation due à la géometrie du tube. Pour citer cet article : E. Marušić-Paloka, I. Pažanin, C. R. Mecanique 332 (2004).     

On the rheology of a dilute suspension of rigid spheres in a weakly viscoelastic matrix fluid

The complete solution for the pressure and the velocity field up to O(De) of a dilute suspension of neutrally buoyant, non-Brownian rigid spheres suspended in an unbounded, weakly viscoelastic matrix fluid, where is the solid volume fraction and De is the Deborah number of the matrix fluid, is presented. The spheres are subjected to an arbitrary linear velocity profile at infinity. The analytical solution is used for the prediction of the bulk stress, and specifically for the calculation of the first and the second normal stress differences in simple shear and uniaxial elongational flows. A comparison of the results with available values reported in the literature is also offered. The final expressions for the bulk normal stress differences in shear and uniaxial elongational flow fully agree with those reported earlier by Greco et al., J. Non-Newton. Fluid Mech., 147 (2007) 1–10.     

Near-critical CO2 liquid--vapor flow in a sub-microchannel. Part II: Flow regimes

The mean-field free-energy LBM is used to investigate the liquid--vapor flow regimes in a two-dimensional 200 nm channel with near-critical CO₂ at temperature 25 ^oC and pressure 6.434 MPa as the working fluid. Flow regimes over vapor qualities ranging from 0.01x0.90, Weber numbers O(10⁻²)WeO(10³), and capillary numbers O(10⁻²)CaO(10) are investigated. Three major types of flow regimes are encountered -- dispersed flow, bubble/plug flow, and liquid strip flow, each of which encompasses variations of the basic flow regime. The three major flow regimes with all their variations can be further classified into two major categories – regular and irregular. Irregular flow regimes are characterized by a distorted interface, including distorted bubble/slug flow, intermittent strip flow, wavy strip flow, and wispy-strip flow. Flows in which the interface is ordered and symmetric such as bubble/plug and strip flows are classified as regular flow regimes. It is found that the transition from regular to irregular flow regimes occurs at Weber number between 500 and 1000, independent of the vapor quality. Although no experiments exist at the same conditions, comparison of the predicted transition between regular and irregular regimes shows the same qualitative trends as experiments found in the literature.     

Effects of inclination angle on natural convection in enclosures filled with Cu–water nanofluid

Effects of inclination angle on natural convection heat transfer and fluid flow in a two-dimensional enclosure filled with Cu-nanofluid has been analyzed numerically. The performance of nanofluids is tested inside an enclosure by taking into account the solid particle dispersion. The angle of inclination is used as a control parameter for flow and heat transfer. It was varied from  = 0° to  = 120°. The governing equations are solved with finite-volume technique for the range of Rayleigh numbers as 10³  Ra  10⁵. It is found that the effect of nanoparticles concentration on Nusselt number is more pronounced at low volume fraction than at high volume fraction. Inclination angle can be a control parameter for nanofluid filled enclosure. Percentage of heat transfer enhancement using nanoparticles decreases for higher Rayleigh numbers.