Effect of suspended particles on the stability of plane poiseuille flow

The behavior of the neutral stability curves is investigated for various values of the particle relaxation time and mass concentration 0 100 and 0 f 0.1. It is shown that as increases from zero the flow is at first destabilized and then at >6 becomes stable, while at >40 the stabilizing effect of the dispersed phase grows weaker. It is found that there is a certain interval 10< <40 on which the flow is most stable.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 46–53, January–February, 1986.     

Calculation of the pressure on the side surface of bodies consisting of a spherical segment joined to an inverted cone in a supersonic stream

The results of investigations of inviscid flow over inverted cones with nose consisting of a spherical segment were published for the first time in Soviet literature in [1–4]. In the present paper, a numerical solution to this problem is obtained using the improved algorithms of [5, 6], which have proved themselves well in problems of exterior flow over surfaces with positive angles of inclination to the oncoming flow. It is shown that the Mach number 2 M , equilibrium and nonequilibrium physicochemical transformations in air (H = 60 km, V = 7.4 km/sec, R₀ = 1 m), and the angle of attack 0 40° influence the investigated pressure distributions. A comparison of the results of the calculations with drainage experiments for M = 6, = 0-25° confirms the extended region of applicability of the developed numerical methods. Also proposed is a simple correlation of the dependence on the Mach number in the range 1.5 M of the shape of the shock wave near a sphere in a stream of ideal gas with adiabatic exponent = 1.4.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 178–183, January–February, 1981.     

Wärmeübergang bei erzwungener turbulenter Strömung in Ringspalten und örtlich beliebig veränderlichen Randbedingungen zweiter Art

Zusammenfassung Das Problem des Wärmeübergangs bei turbulenter Strömung in konzentrischen Ringspalten wird für den dreidimensionalen Fall theoretisch gelöst, wobei die Wandwärmestromdichte sowohl in azimutaler als auch in axialer Richtung beliebig variiert. Die Lösung der Energiegleichung erfolgt mit der klassischen Methode der Superposition und Trennung der Variablen, wobei das dabei auftretende Sturm-Liouvillesche Eigenwertproblem numerisch gelöst wird. Zur Lösung werden Verteilungen für die Geschwindigkeit und anisotropen turbulenten Austauschgrößen verwendet, die mit dem phänomenlogischen Turbulenzmodell von Ramm berechnet wurden. Ergebnisse werden über einen weiten Bereich der Reynolds-Zahl (10⁴ Re 10⁶), der Prandtl-Zahl (0 Pr 100) und für verschiedene Radienverhältnisse diskutiert.

---

Turbulent forced convection heat transfer in annuli with arbitrarily varying boundary conditions of second kind

The problem of turbulent flow heat transfer in concentric annuli is analysed for the general threedimensional case in which the wall heat flux varies arbitrarily in both the circumferential and axial directions. The energy equation is solved using the classical method of superposition and separating variables, where the resulting Sturm-Liouville problem are evaluated numerically. The solution is based on velocity profiles and anisotropic thermal turbulent transport properties evaluated by Ramm's phenomenological turbulence model. Results are discussed over a wide range of Reynolds number (10⁴ Re 10⁶), Prandtl number (0 Pr 100) and radius ratio.

---

Bezeichnungen a,b Fourierkoeffizienten - B geometrische Funktion, [s(1-r) + r]/(1–s) - C Koeffizienten - D hydraulischer Durchmesser, 2(r₂ – r₁) - E Energietransportfunktion - f axiale Wärmestromdichteverteilung - F azimutale Wärmestromdichteverteilung - g radiale Temperaturfunktion - l Kanallänge - L dimensionslose Kanallänge, 1/D - M axialer Temperaturgradient im thermisch ausgebildeten Bereich - n harmonischer Parameter - Nu Nusselt-Zahl - Pe Péclet-Zahl - Pr Prandtl-Zahl - q Wärmestromdichte - Q dimensionslose Wärmestromdichte, q/q₀ - r dimensionslose radiale Koordinate, (R-r₁)/(r₂-r₁) - r₁,r₂ innerer und äußerer Ringspaltradius - R radiale Koordinate - Re Reynolds-Zahl - s Ringspaltverhältnis, r₁/r₂ - T dimensionslose Temperatur, 2· · (-_E/(D· q₀ - u dimensionslose Geschwindigkeit, U/U_m - U Geschwindigkeit - x dimensionslose axiale Koordinate, X/D - X axiale Koordinate - Wärmeübergangskoeffizient - _un modifizierter Eigenwert - halber Segmentwinkel - turbulente Austauschgröe - Temperatur - dimensionslose Temperaturdifferenz, T - T_m - Wärmeleitfähigkeit - _un Eigenwerte - kinematische Viskosität - azimutale Koordinate - Eigenfunktionen Indizes e thermischer Einlauf - E Eintritt bei x=0 - H Wärme - i Bedingung an der i-ten benetzten Oberfläche (i=1 – Innenrohr, i=2 - Außenrohr) - j Bedingung, wenn nur an der j-ten Oberfläche des Ringspaltes die Wärme übertragen wird (j=1,2) - ij Bedingung an der i-ten Oberfläche, wenn nur an der j-ten Oberfläche des Ringspaltes die Wärme übertragen wird (ij=11, 12, 22, 21) - m mittel - n Ordnung der Harmonischen - r radiale Richtung - u Ordnung des Eigenwertproblems - azimutale Richtung - 0 umfangskonstant - thermisch ausgebildet     

Numerical investigation of laminar separation in the case of supersonic flow of viscous gas past spiked bodies

The complete Navier-Stokes equations for a compressible viscous perfect heat conducting gas have been used in a numerical investigation of laminar separation in the case of supersymmetric axisymmetric flow past cylinders with a conical nose and a spike at the front of finite thickness. The flow structure has been studied in its dependence on the length of the spike and the half-angle of the conical tip. For the considered free-stream parameters (2 M 6, 100 Re 500) and spike lengths, which do not exceed the diameter of the cylinder, the existence of steady flow regimes has been established and it has been shown that the spike in front of the body reduces its total drag and the heat flux to its surface.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 126–131, March–April, 1984.     

Classical limits for the coefficient of variation for the normal distribution

The exact classical limits for the coefficient of variation c for the normal distribution are derived. The hand-calculating approximated classical limits for c having high accuracy are given to meet practical engineering needs. Using Odeh and Owen's computational method and Brent's algorithm, the tables for the r-upper exact classical limits of coefficient of variation for normal distribution are calculated for the different confidence coefficient , the sample size n=1 (1)30,40,60,120, the sample coefficient of variation =0.01(0.01)0.20. It is shown that if n8, 0.20, then the -upper exact classical limits c_u for c are slightly higher than the exact fiducial limits c_u,F for c. if n>8, 0.20, then c_u–c_u,F<5×10^–6.     

The Thermodynamic Significance of the Local Volume Averaged Temperature

Since the temperature is not an additive function, the traditional thermodynamic point of view suggests that the volume integral of the temperature has no precise physical meaning. This observation conflicts with the customary analysis of non-isothermal catalytic reactors, heat pipes, driers, geothermal processes, etc., in which the volume averaged temperature plays a crucial role. In this paper we identify the thermodynamic significance of the volume averaged temperature in terms of a simple two-phase heat transfer process. Given the internal energy as a function of the point temperature and the density

A rotating hot-wire technique for spatial sampling of disturbed and manipulated duct flows

The documentation and control of flow disturbances downstream of various open inlet contractions was the primary focus with which to evaluate a spatial sampling technique. An X-wire probe was rotated about the center of a cylindrical test section at a radius equal to one-half that of the test section. This provided quasi-instantaneous multi-point measurements of the streamwise and azimuthal components of the velocity to investigate the temporal and spatial characteristics of the flowfield downstream of various contractions. The extent to which a particular contraction is effective in controlling ingested flow disturbances was investigated by artificially introducing disturbances upstream of the contractions. Spatial as well as temporal mappings of various quantities are presented for the streamwise and azimuthal components of the velocity. It was found that the control of upstream disturbances is highly dependent on the inlet contraction; for example, reduction of blade passing frequency noise in the ground testing of jet engines should be achieved with the proper choice of inlet configurations.List of symbols K _uv correlation coefficient= - P percentage of time that an azimuthal fluctuating velocity derivative dv/d is found - U streamwise velocity component U=U (, t) - V azimuthal or tangential velocity component due to flow and probe rotation V=V (, t) - mean value of streamwise velocity component - U _m resultant velocity from and - mean value of azimuthal velocity component induced by rotation - u fluctuating streamwise component of velocity u=u(, t) - v fluctuating azimuthal component of velocity v = v (, t) - u phase-averaged fluctuating streamwise component of velocity u=u(0) - v phase-averaged fluctuating azimuthal component of velocity v=v() - û average of phase-averaged fluctuating streamwise component of velocity (u()) over cases I-1, II-1 and III-1 û = û() - average of phase-averaged fluctuating azimuthal component of velocity (v()) over cases I-1, II-1 and III-1 - u fluctuating streamwise component of velocity corrected for non-uniformity of probe rotation and/or phase-related vibration u = u(0, t) - v fluctuating azimuthal component of velocity corrected for non-uniformity or probe rotation and/or phase-related vibration v=v (, t) - u ² rms value of corrected fluctuating streamwise component of velocity - rms value of corrected fluctuating azimuthal component of velocity - phase or azimuthal position of X-probe     

Analysis of melt spinning transients in Lagrangian coordinates

Transients in melt spinning of isothermal power law and Newtonian fluids were found to be governed by an extremely simple partial differential equation ² ( ^1/n )/() = 0 in Lagrangian coordinates where is the cross-sectional area,n the power law exponent, the time and the the time at which a fluid molecule constituting the spinline left the spinneret. The general integral ^1/n =f() +g () of the above governing equation containing two arbitrary functions represents physically attainable spinline transients. Hitherto unknown analytical transient solutions of the above governing equation were obtained for the response of isothermal constant tension spinlines to a stepwise change in tension, spinneret hole area, extrusion speed or extrusion viscosity and for the starting transient in gravitational spinning. Linearized perturbation solutions and the stability limit of the spinline derived from the above new found nonlinear solutions were in agreement with previous findings and the above nonlinear response of the spinline to a step increase in the spinneret hole area was found to be equivalent to Orowan's tandem cylinder model of dent growth in filament stretching.     

Calculation of heat transfer accompanying hypersonic three-dimensional flow of air over slender blunt-nosed cones

The effective length method [1, 2] has been used to make systematic calculations of the heat transfer for laminar and turbulent boundary layers on slender blunt-nosed cones at small angles of attack ( + 5° in a separationless hypersonic air stream dissociating in equilibrium (half-angles of the cones 0 20°, angles of attack 0 15°, Mach numbers 5 M 25). The parameters of the gas at the outer edge of the boundary layer were taken equal to the inviscid parameters on the surface of the cones. Analysis of the results leads to simple approximate dependences for the heat transfer coefficients.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 173–177, September–October, 1981.     

Nonlinear rheological behavior of a concentrated spherical silica suspension

Linear and nonlinear viscoelastic properties were examined for a 50 wt% suspension of spherical silica particles (with radius of 40 nm) in a viscous medium, 2.27/1 (wt/wt) ethylene glycol/glycerol mixture. The effective volume fraction of the particles evaluated from zero-shear viscosities of the suspension and medium was 0.53. At a quiescent state the particles had a liquid-like, isotropic spatial distribution in the medium. Dynamic moduli G^* obtained for small oscillatory strain (in the linear viscoelastic regime) exhibited a relaxation process that reflected the equilibrium Brownian motion of those particles. In the stress relaxation experiments, the linear relaxation modulus G(t) was obtained for small step strain (0.2) while the nonlinear relaxation modulus G(t, ) characterizing strong stress damping behavior was obtained for large (>0.2). G(t, ) obeyed the time-strain separability at long time scales, and the damping function h() (–G(t, )/G(t)) was determined. Steady flow measurements revealed shear-thinning of the steady state viscosity () for small shear rates (< ^–1; = linear viscoelastic relaxation time) and shear-thickening for larger (>^–1). Corresponding changes were observed also for the viscosity growth and decay functions on start up and cessation of flow, + (t, ) and _– (t, ). In the shear-thinning regime, the and dependence of ₊(t,) and _–(t,) as well as the dependence of () were well described by a BKZ-type constitutive equation using the G(t) and h() data. On the other hand, this equation completely failed in describing the behavior in the shear-thickening regime. These applicabilities of the BKZ equation were utilized to discuss the shearthinning and shear-thickening mechanisms in relation to shear effects on the structure (spatial distribution) and motion of the suspended particles.Dedicated to the memory of Prof. Dale S. Parson     

Heat transfer and equilibrium temperature of a sphere in a supersonic rarefied gas flow

Some results are presented of experimental studies of the equilibrium temperature and heat transfer of a sphere in a supersonic rarefied air flow.The notations D sphere diameter - u, , T,,l, freestream parameters (u is velocity, density, T the thermodynamic temperature,l the molecular mean free path, the viscosity coefficient, the thermal conductivity) - T₀ temperature of the adiabatically stagnated stream - T_e mean equilibrium temperature of the sphere - T_w surface temperature of the cold sphere (T_we) - mean heat transfer coefficient - _e air thermal conductivity at the temperature T_e - P Prandtl number - M Mach number     

A class of hypo-elastic non-elastic materials and their thermodynamics

Thermodynamics is developed for a class of thermo-hypo-elastic materials. It is shown that materials of this class obey the laws of thermodynamics, but are not elastic.

Table of Symbols

Latin Letters A _ijkl tensor-valued function of t _ij appearing in hypo-elastic constitutive relation - B _ijkl another tensor-valued function. See equation (4.2) - B the square of - d _ij rate of deformation tensor - d _ij deviator of rate of deformation - f, k functions of pressure, p - g, h functions of the invariant - p pressure - q _i heat flux vector - s _ij stress deviator - _ij co-rotational derivative of stress deviator - t time - t ₁ t ₂ specific values of time - t _ij stress tensor - t _ij ⁰ a specific value of stress - T Temperature - T ₀ a specific value of temperature - u _i velocity - V(t) a material volume as a function of time, t - V ₀ a material volume at a reference configuration - W work (W = work done in a deformation—section 5) Sript Letters Specific internal energy - Specific Helmholtz free energy - G Specific Gibbs function Greek Letters an invariant of the stress deviator—see eq. (2.4) - _ij kroneker delta - (W = work done in a deformation—section 5) - specific entropy - hypo-elastic potential - hypo-elastic potential - mass density - ₀ mass density in a reference configuration - specific volume = 1/ - a function of p - _ijkl a constant tensor—see eq. (2.5) - –G/ - _ij rate of rotation tensor This work is dedicated to Jerald L. Ericksen, without whose influence it would not have been possible     

Determination of the distributed parameters of a lossless wave supporting system from boundary measurements

A lossless wave supporting system is modelled by two linear partial differential equations with variable coefficients(x) and(x),x0, which represent the distributed parameters of the system. The problem of determining(x) and(x) from measurements performed at the boundaryx=0 is considered. It is shown that generally it is only possible to determine an impedance function (), where and depend on and. If some additional relationship is known between and, however, it may be possible to fully determine these parameters. This is the case if, for example, it is known that the wave speed is constant. The results are interpreted for sample cases from solid mechanics, fluid mechanics, acoustics, and electromagnetic theory, and solutions are given of specific problems. The paper generalizes work on determination of vocal tract shapes from acoustical measurements made at the lips.     

The value of the critical exponent for reaction-diffusion equations in cones

Let D R ^N be a cone with vertex at the origin i.e., D = (0, )x where S ^N–1 and x D if and only if x = (r, ) with r=¦x¦, . We consider the initial boundary value problem: u _t = u+u ^p in D×(0, T), u=0 on Dx(0, T) with u(x, 0)=u ₀(x) 0. Let ₁ denote the smallest Dirichlet eigenvalue for the Laplace-Beltrami operator on and let ₊ denote the positive root of (+N–2) = ₁. Let p ^* = 1 + 2/(N + ₊). If 1 < p < p ^*, no positive global solution exists. If p>p ^*, positive global solutions do exist. Extensions are given to the same problem for u _t=+¦x¦ u ^p .This research was supported in part by the Air Force Office of Scientific Research under Grant # AFOSR 88-0031 and in part by NSF Grant DMS-8 822 788. The United States Government is authorized to reproduce and distribute reprints for governmental purposes not withstanding any copyright notation therein.     

Buoyancy- and pressure-driven motion in a vertical porous layer: Effects of quadratic drag

The seepage velocity arising from pressure and buoyancy driving forces in a slender vertical layer of fluid-saturated porous media is considered. Quadratic drag (Forcheimer effects) and Brinkman viscous forces are included in the analysis. Parameters are identified which characterize the influence of matrix permeability, quadratic drag and buoyancy. An explicit solution is obtained for pressure-driven flow which illustrates the influence of quadratic drag and the strong boundary layer behavior expected for low permeability media. The experimental data of Givler and Altobelli [2] for water seepage through a high porosity foam is found to yield good agreement with the present analysis. For the case of buoyancy-driven flow, a uniformly valid approximate solution is found for low permeability media. Comparison with the pressure-driven case shows strong similarities in the near-wall region.Nomenclature B function of - d layer thickness - D discriminant defined by Equation (9) - modified Darcy number - F Forcheimer constant - g gravitational acceleration - k porous matrix permeability - m parameter defined by Equation (11) - p pressure - p modified pressure - pressure gradient - R buoyancy parameter - T ₀ nominal layer temperature - u seepage velocity - dimensionless seepage velocity - _c composite approximation - _i boundary layer velocity - _o outer or core flow approximation - _m midplane velocity - U matching velocity - V cross-sectional average velocity - w variable defined by Equation (12) - x, z Cartesian coordinates - , dimensionless Cartesian coordinates - inertia parameter - T layer temperature difference - larger root of cubic given by Equation (8) - fluid dynamic viscosity - _e effective viscosity of fluid saturated medium - variable defined by Equation (18) - 0 fluid density - smaller root of cubic given by Equation (8) - variable defined by Equation (18) - stretched inner coordinate - porosity - function of      

Transport in ordered and disordered porous media III: Closure and comparison between theory and experiment

In this paper we examine the closure problem associated with the volume averaged form of the Stokes equations presented in Part II. For both ordered and disordered porous media, we make use of a spatially periodic model of a porous medium. Under these circumstances the closure problem, in terms of theclosure variables, is independent of the weighting functions used in the spatial smoothing process. Comparison between theory and experiment suggests that the geometrical characteristics of the unit cell dominate the calculated value of the Darcy's law permeability tensor, whereas the periodic conditions required for thelocal form of the closure problem play only a minor role.Roman Letters A interfacial area of the- interface contained within the macroscopic region, m² - A _e area of entrances and exits for the-phase contained within the macroscopic system, m² - A interfacial area of the- interface associated with the local closure problem, m² - A _p surface area of a particle, m² - b vector used to represent the pressure deviation, m^–1 - B ⁰ B+I, a second order tensor that maps v _m ontov - B second-order tensor used to represent the velocity deviation - d _p 6V _p/A_p, effective particle diameter, m - d a vector related to the pressure, m - D a second-order tensor related to the velocity, m² - g gravity vector, m/s² - I unit tensor - K traditional Darcy's law permeability tensor calculated on the basis of a spatially periodic model, m² - K _m permeability tensor for the weighted average form of Darcy's law, m² - L general characteristic length for volume averaged quantities, m - L _p characteristic length for the volume averaged pressure, m - L characteristic length for the porosity, m - L _v characteristic length for the volume averaged velocity, m - characteristic length (pore scale) for the-phase - _i i=1, 2, 3 lattice vectors, m - weighting function - m(-y) , convolution product weighting function - m _v special convolution product weighting function associated with the traditional averaging volume - m _g general convolution product weighting function - m _V unit cell convolution product weighting function - m _C special convolution product weighting function for ordered media which produces the cellular average - n unit normal vector pointing from the-phase toward the -phase - p pressure in the-phase, N/m² - p _m superficial weighted average pressure, N/m² - p _m intrinsic weighted average pressure, N/m² - p traditional intrinsic volume averaged pressure, N/m² - p – p _m , spatial deviation pressure, N/m² - r ₀ radius of a spherical averaging volume, m - r _m support of the convolution product weighting function - r position vector, m - r position vector locating points in the-phase, m. - V averaging volume, m³ - B volume of the-phase contained in the averaging volume, m³ - V _cell volume of a unit cell, m³ - v velocity vector in the-phase, m/s - v _m superficial weighted average velocity, m/s - v _m intrinsic weighted average velocity, m/s - v traditional superficial volume averaged velocity, m/s - v – v _m , spatial deviation velocity, m/s - x position vector locating the centroid of the averaging volume or the convolution product weighting function, m - y position vector relative to the centroid, m - y position vector locating points in the -phase relative to the centroid, m Greek Letters indicator function for the-phase - Dirac distribution associated with the- interface - V /V, volume average porosity - _m m * , weighted average porosity - mass density of the-phase, kg/m³ - viscosity of the-phase, Ns/m²     

Lp-estimates for the nonlinear spatially homogeneous Boltzmann equation

This paper studies L^p-estimates for solutions of the nonlinear, spatially homogeneous Boltzmann equation. The molecular forces considered include inverse k^th-power forces with k > 5 and angular cut-off.The main conclusions are the following. Let f be the unique solution of the Boltzmann equation with f(v,t)(1 + ¦v²¦)^(s ₁ ^{+ /p)/2} L¹, when the initial value f ₀ satisfies f ₀(v) 0, f ₀(v) (1 + ¦v¦²)^(s ₁ ^{+ /p)/2} L¹, for some s₁ 2 + /p, and f ₀(v) (1 + ¦v¦²)^s/2 L^p. If s 2/p and 1 < p < , then f(v, t)(1 + ¦v¦²)^{(s s} ₁)^/2 L^p, t > 0. If s >2 and 3/(1+ ) < p < , thenf(v,t) (1 + ¦v¦²)^(s(s ₁ ^{+ 3/p))/2} L^p, t > 0. If s >2 + 2C₀/C₁ and 3/(l + ) < p < , then f(v,t)(1 + ¦v¦²)^s/2 L^p, t > 0. Here 1/p + 1/p = 1, x y = min (x, y), and C₀, C₁, 0 < 1, are positive constants related to the molecular forces under consideration; = (k – 5)/ (k – 1) for k^th-power forces.Some weaker conclusions follow when 1 < p 3/ (1 + ).In the proofs some previously known L-estimates are extended. The results for L^p, 1 < p < , are based on these L-estimates coupled with nonlinear interpolation.     

Quantitative analysis of flow visualizations in an unsteady channel flow

Quantitative results concerning the modulation of the ejection and bursting frequency in an unsteady channel flow obtained by flow visualizations are presented and compared with probe measurements. The frequency of the imposed velocity oscillations f covers a large range going from the quasi steady limit to the time mean bursting frequency in the corresponding steady flow. The imposed amplitudes of the velocity oscillations are 13% and 20% of the centerline velocity. The bursting process is identified by the intermittent lift up of the dye injected at the wall. Qualitative analysis of the flow visualizations show that the ejection activity at a given phase of the oscillation cycle is repetitive from one cycle to the other. The modulation amplitude of the ejection frequency f _e is sensitive to the imposed frequency. At low imposed frequency f _e is modulated as the wall shear stress, but the inner scaling does not hold when f ⁺ is high. Here, (+) corresponds to the quantities normalized with the inner variables, i.e. the friction velocity u and the viscosity . The grouping of the ejections into bursts show the coexistence of two categories of events which react differently to the forcing. The groups of ejections (Multiple Ejection Bursts) are governed by the modulation of the wall shear stress in the whole imposed frequency range. The solitary ejections (or the Single Ejection Bursts) have modulation amplitudes and phases which differ significantly from those of in the intermediate and high imposed frequency range. There is a good agreement between the flow visualization data and the probe measurements.     

Evaluation of the dynamic-mechanical properties of solids from a cooperative model for stress relaxation

For many solid materials the stress relaxation process obeys the universal relationF = – (d/d lnt)_max = (0.1 ± 0.01) ( ₀ — _i ), regardless of the structure of the material. Here denotes the stress,t the time, ₀ the initial stress of the experiment and _i the internal stress. A cooperative model accounting for the similarity in relaxation behaviour between different materials was developed earlier. Since this model has a spectral character, the concepts of linear viscoelasticity are used here to evaluate the corresponding prediction of the dynamic mechanical properties, i.e. the frequency dependence of the storageE () and lossE () moduli. Useful numerical approximations ofE () andE () are also evaluated. It is noted that the universal relation in stress relaxation had a counterpart in the frequency dependence ofE (). The theoretical prediction of the loss factor for high-density polyethylene is compared with experimental results. The agreement is good.     

Heteroclinic orbits in singular systems: A unifying approach

We consider singularly perturbed systems , such that=f(, _o, 0). _o ^m , has a heteroclinic orbitu(t). We construct a bifurcation functionG(, ) such that the singular system has a heteroclinic orbit if and only ifG(, )=0 has a solution=(). We also apply this result to recover some theorems that have been proved using different approaches.