裂纹扩展过程中线性内聚力模型计算的半解析有限元法

提出了求解基于线性内聚力模型的平面裂纹扩展问题的半解析有限元法,利用弹性平面扇形域哈密顿体系的方程,通过分离变量法及共轭辛本征函数向量展开法,推导了一个环形和一个圆形奇异超级解析单元列式,组装这两个超级单元能准确地描述裂纹表面作用有双线性内聚力的平面裂纹尖端场。将该解析元与有限元相结合,构成半解析的有限元法,可求解任意几何形状和载荷的基于线性内聚力模型的平面裂纹扩展问题。典型算例的计算结果表明本文方法简单有效,具有令人满意的精度。     

A refined cohesive zone model that accounts for inertia of cohesive zone of a moving crack

Existing cohesive zone models assume that actual fracture zone of non-zero mass can be modeled by a line segment (cohesive zone) with no mass and inertia. In the present work, a simplified mass-spring model is presented to study inertia effect of cohesive zone on a mode-I steady-state moving crack. It is showed that fracture energy predicted by the present model increases dramatically when a finite limiting crack speed is approached. Reasonable agreement with known experiments indicates that the present model has the potential to catch the inertia effect of cohesive zone which has been ignored in existing cohesive zone models and better simulate dynamic fracture at high crack speed.     

CRACK PROPAGATION IN POLYCRYSTALLINE ELASTIC-VISCOPLASTIC MATERIALS USING COHESIVE ZONE MODELS

Cohesive zone model was used to simulate two-dimensional plane strain crack propagation at the grain level model including grain boundary zones. Simulated results show that the original crack-tip may not be separated firstly in an elastic-viscoplastic polycrystals. The grain interior's material properties (e.g. strain rate sensitivity) characterize the competitions between plastic and cohesive energy dissipation mechanisms. The higher the strain rate sensitivity is, the larger amount of the external work is transformed into plastic dissipation energy than into cohesive energy, which delays the cohesive zone rupturing. With the strain rate sensitivity decreased, the material property tends to approach the elastic-plastic responses. In this case, the plastic dissipation energy decreases and the cohesive dissipation energy increases which accelerates the cohesive zones debonding. Increasing the cohesive strength or the critical separation displacement will reduce the stress triaxiality at grain interiors and grain boundaries. Enhancing the cohesive zones ductility can improve the matrix materials resistance to void damage.     

Mode-3 spontaneous crack propagation along functionally graded bimaterial interfaces

The effects of combining functionally graded materials (FGMs) of different inhomogeneous property gradients on the mode-3 propagation characteristics of an interfacial crack are numerically investigated. Spontaneous interfacial crack propagation simulations were performed using the newly developed spectral scheme. The numerical scheme derived and implemented in the present work can efficiently simulate planar crack propagation along functionally graded bimaterial interfaces. The material property inhomogeneity was assumed to be in the direction normal to the interface. Various bimaterial combinations were simulated by varying the material property inhomogeneity length scale. Our parametric study showed that the inclusion of a softening type FGM in the bimaterial system leads to a reduction in the fracture resistance indicated by the increase in crack propagation velocity and power absorbed. An opposite trend of increased fracture resistance was predicted when a hardening material was included in the bimaterial system. The cohesive tractions and crack opening displacements were altered due to the material property inhomogeneity, but the stresses ahead of the cohesive zone remained unaffected.     

Inverse parameter identification of cohesive zone model for simulating mixed-mode crack propagation

Inverse analysis is widely applied to the identification of material properties or model parameters. In order to improve the computational efficiency of the inverse method based on the genetic algorithm, an interpolation scheme upon the response surface constructed by the finite element simulation has been adopted in this paper. Meanwhile, a gradual homogenization treatment scheme has also been presented to improve the convergence of the inverse method based on the Kalman filter algorithm. Both methods are proven effective in dealing with the single-objective inverse problem. However, literature studies show that the adoption of multiple types of experimental information is useful to improve the accuracy of inverse analysis. In this case, it turns into a multiple-objective inverse problem. Our practice proved that the above-mentioned two methods might not yield a proper result if the sensitivity issue of different types of information is not considered. Therefore, another multi-objective inverse method, in combination of the above two optimization algorithms and a weight-estimating scheme that can consider such sensitivity, has been further presented. Finally, by using a mixed-mode crack propagation simulation and two types of experimental information (loading-displacement response curve and crack path profile), the parameters of the cohesive zone model were inversely identified and its simulation results are in good agreement with the experiment.     

粘聚裂纹扩展的强化有限元h型网格自适应模拟

非连续变形分析和非规则节点处理是基于单元细划的粘聚裂纹扩展网格自适应模拟的关键。首先,利用强化有限单元法中数学单元和物理单元分离的特点,通过引入过渡单元,将适用于非连续变形描述的数学模式覆盖法和方便处理非规则节点的物理模式重构法结合,提出了强化有限单元法的统一关联法则,并导出了相应的单元列式。其次,基于数学裂纹尖端影响域和裂尖单元尺寸,提出了基于强化有限单元法的粘聚裂纹扩展过程模拟的h型网格自适应策略。最后,通过两个算例验证了本文方法的合理性和有效性。     

Steady growth of a crack with a rate and temperature sensitive cohesive zone

The steady-state dynamic propagation of a crack in a heat conducting elastic body is numerically simulated. Specifically, a mode III semi-infinite crack with a nonlinear temperature dependent cohesive zone is assumed to be moving in an unbounded homogeneous linear thermoelastic continuum. The numerical results are obtained via a semi-analytical technique based on complex variables and integral transforms. The relation between the thermo-mechanical properties of the failure zone and the resulting crack growth regime are investigated. The results show that temperature dependent solutions are substantially different from purely mechanical ones in that their existence and stability strongly depends on the cohesive zone thermal properties.     

Near-tip out of plane displacement fields for dynamic crack propagation in functionally graded materials

Asymptotic expansion for the out of plane displacement field around a crack propagating along the gradient in a functionally graded material is developed. The irregular behavior of one of the terms in the expansion at low crack speeds is further examined and a remedial solution, which is well behaved at low crack speeds, is proposed. The developed out of plane displacement field is used to estimate stress intensity factor from quasi-static finite element solution. The results indicate that inclusion of the proposed nonhomogeneity specific terms gives estimates of stress intensity factor, which are consistent with existing analytical predictions.     

Mixed-mode I/II fields around a crack with a cohesive zone ahead of the crack tip

Considering a cohesive zone ahead of the crack tip, the linear elastic crack problem under Mode I, Mode II or mixed-mode conditions is formulated in an elliptic coordinate system, so that the cohesive surfaces are conveniently represented by straight line segments. It is shown that the displacement and stress fields around the crack tip and the cohesive zone, expressed in terms of elliptic coordinates, have a simple mathematical form, which does not contain a stress singularity at the crack tip due to the existence of the cohesive zone.