首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献,搜索用时 93 毫秒
1.
Three-dimensional direct numerical simulations of a solid-body rotation superposed on a uniform axial flow entering a rotating constant-area pipe of finite length are presented. Steady in time profiles of the radial, axial, and circumferential velocities are imposed at the pipe inlet. Convective boundary conditions are imposed at the pipe outlet.The Wang and Rusak(Phys. Fluids 8:1007–1016, 1996.doi:10.1063/1.86882) axisymmetric instability mechanism is retrieved at certain operational conditions in terms of incoming flow swirl levels and the Reynolds number. However, at other operational conditions there exists a dominant,three-dimensional spiral type of instability mode that is consistent with the linear stability theory of Wang et al.(J. Fluid Mech. 797: 284–321, 2016). The growth of this mode leads to a spiral type of flow roll-up that subsequently nonlinearly saturates on a large amplitude rotating spiral wave. The energy transfer mechanism between the bulk of the flow and the perturbations is studied by the Reynolds-Orr equation. The production or loss of the perturbation kinetic energy is combined of three components: the viscous loss, the convective loss at the pipe outlet, and the gain of energy at the outlet through the work done by the pressure perturbation. Theenergy transfer in the nonlinear stage is shown to be a natural extension of the linear stage with a nonlinear saturated process.  相似文献   

2.
The present work is an experimental study of the evolutioncharacteristics of swirl in the flow in a pipe at a moderately highReynolds number and over a wide range of swirl numbers characterisingthe swirl strength. The measurements are done by 3D LDV in a speciallydesigned facility that works on the principle of refractive-indexmatching. Swirl with the well-defined distribution of a constant angularvelocity is introduced into the test section of this facility by a swirlgenerating device in which a tube bundle in the pipe rotates about thepipe axis. The measurements have been processed to yield themean-velocity vector and the Reynolds stress tensor in this flow. Ananalysis of the measured evolution characteristics brings out a dominanteffect of swirl with a solid body rotation as the annihilation ofReynolds shear streses.  相似文献   

3.
The evolution of Görtler vortices with wavelength smaller than the thickness of the boundary layer on a concave surface is modelled asymptotically at high Reynolds and Görtler numbers. It is known that in the initial linear stage of their evolution such vortices have the largest increment of amplitude growth. Numerical results demonstrate that taking the nonlinear interaction of the flow parameters into account considerably reduces the growth rate and leads to the forming of a perturbed vortex region core; profiles of the flow characteristics in the different stages of vortex evolution are presented.  相似文献   

4.
Atmospheric low swirl burner flow characterization with stereo PIV   总被引:1,自引:0,他引:1  
The lean premixed prevaporized (LPP) burner concept is now used in most of the new generation gas turbines to reduce flame temperature and pollutants by operating near the lean blow-off limit. The common strategy to assure stable combustion is to resort to swirl stabilized flames in the burner. Nevertheless, the vortex breakdown phenomenon in reactive swirling flows is a very complex 3D mechanism, and its dynamics are not yet completely understood. Among the available measurement techniques to analyze such flows, stereo PIV (S-PIV) is now a reliable tool to quantify the instantaneous three velocity components in a plane (2D–3C). It is used in this paper to explore the reactive flow of a small scale, open to atmosphere, LPP burner (50 kW). The burner is designed to produce two distinct topologies (1) that of a conventional high swirl burner and (2) that of a low swirl burner. In addition, the burner produces a lifted flame that allows a good optical access to the whole recirculation zone in both topologies. The flow is studied over a wide range of swirl and Reynolds numbers at different equivalence ratios. Flow statistics are presented for 1,000 S-PIV snapshots at each configuration. In both reactive and cold nonreactive flow, stability diagrams define the domains of the low and high swirl topologies. Due to the relatively simple conception of the physical burner, this information can be easily used for the validation of CFD computations of the burner flow global structure. Near field pressure measurements reveal the presence of peaks in the power spectra, which suggests the presence of periodical coherent features for almost all configurations. Algorithms have been developed to identify and track large periodic traveling coherent structures from the statistically independent S-PIV realizations. Flow temporal evolution is reconstructed with a POD-based method, providing an additional tool for the understanding of flow topologies and numerical codes validation.  相似文献   

5.
Nonlinear instability and breakup of an annular liquid sheet has been modeled in this paper. The liquid sheet is considered to move axially and is exposed to co-flowing inner and outer gas streams. Also, the effect of outer gas swirl on sheet breakup has been studied. In the developed model a perturbation expansion method has been used with the initial magnitude of the disturbance as the perturbation parameter. This is a comprehensive model in that other geometries of planar sheet and a coaxial jet can be obtained as limiting cases of very large inner radius and inner radius equal to zero, respectively. In this temporal analysis, the effect of liquid Weber number, initial disturbance amplitude, inner gas-to-liquid velocity ratio, outer gas-to-liquid velocity ratio and outer gas swirl strength on the breakup time is investigated. The model is validated by comparison with earlier analytical studies for the limiting case of a planar sheet as well as with experimental data of sheet breakup length available in literature. It is shown that the linear theory cannot predict breakup of an annular sheet and the developed nonlinear model is necessary to accurately determine the breakup length. In the limiting case of a coaxial jet, results show that gas swirl destabilizes the jet, makes helical modes dominant compared to the axisymmetric mode and decreases jet breakup length. These results contradict earlier linear analyses and agree with experimental observations. For an annular sheet, it is found that gas flow hastens the sheet breakup process and shorter breakup lengths are obtained by increasing the inner and the outer gas velocity. Axially moving inner gas stream is more effective in disintegrating the annular sheet compared to axially moving outer gas stream. When both gas streams are moving axially, the liquid sheet breakup is quicker compared to that with any one gas stream. In the absence of outer gas swirl, the axisymmetric mode is the dominant instability mode. However, when outer gas flow has a swirl component higher helical modes become dominant. With increasing outer gas swirl strength, the maximum disturbance growth rate increases and the most unstable circumferential wave number increases resulting in a highly asymmetric sheet breakup with shorter breakup lengths and thinner ligaments.  相似文献   

6.
Studying the evolution of 3D disturbances is of crucial theoretical importance for understanding the transition process. The present study concerns the nonlinear evolution of second mode unstable disturbances in a supersonic boundary layer by the numerical simulation, and discusses the selectivity of 3D disturbances and possibility to transition. The results indicate that a Klebanoff type nonlinear interaction between 2D and 3D disturbances with the same frequency may amplify a band of 3D disturbances centered at a finite spanwise wavenumber. That is, certain 3D disturbances can be selectively and rapidly amplified by the unstable 2D disturbances, and certain small-scale 3D structures will appear.  相似文献   

7.
We investigate the singularity formation of a nonlinear nonlocal system. This nonlocal system is a simplified one-dimensional system of the 3D model that was recently proposed by Hou and Lei (Comm Pure Appl Math 62(4):501–564, 2009) for axisymmetric 3D incompressible Navier–Stokes equations with swirl. The main difference between the 3D model of Hou and Lei and the reformulated 3D Navier–Stokes equations is that the convection term is neglected in the 3D model. In the nonlocal system we consider in this paper, we replace the Riesz operator in the 3D model by the Hilbert transform. One of the main results of this paper is that we prove rigorously the finite time singularity formation of the nonlocal system for a large class of smooth initial data with finite energy. We also prove global regularity for a class of smooth initial data. Numerical results will be presented to demonstrate the asymptotically self-similar blow-up of the solution. The blowup rate of the self-similar singularity of the nonlocal system is similar to that of the 3D model.  相似文献   

8.
Large-scale vortical structures and associated mixing in methane/air swirling coaxial jets are actively controlled by manipulating the outer shear layer of the outer swirling coaxial jet with miniature flap actuators. In order to investigate the control mechanisms, stereoscopic particle image verocimetry (stereo-PIV) and plannar laser-induced fluorescence (PLIF) techniques are employed. It is found that intense vortex rings are produced in the outer shear layer in phase with the periodic flap motion regardless of the swirl number examined. The vortical structures in the inner shear layer, however, are strongly dependent on the swirl rate. This is because the central methane jet is accelerated by the negative axial pressure gradient, of which strength is determined by the swirl. As a result, the inner vortex formation is significantly suppressed at a higher swirl rate. On the other hand, at a relatively low swirl rate, the inner vortices are shed continuously and the methane jet is pinched off. This particular mode promotes the mixing of methane and air, so that the flammable mixture can be formed at an earlier stage of the jet flow development. In addition, the evolution of secondary streamwise vortices is prompted by the combination of the periodic vortex ring shedding and the swirl. They also contribute to the mixing enhancement in the downstream region.  相似文献   

9.
The generation of mode-2 nonlinear internal waves (IWs) by the evolution of a mode-1 IW in a two-dimensional stratification is investigated. A generation model accounting for intermodal interaction is derived based on a multi-modal approach in a weakly nonlinear and non-hydrostatic configuration. The generation model is numerically solved to simulate the evolution of mode-1 and mode-2 IWs in an inhomogeneous pycnocline. The numerical experiments confirm that mode-2 IWs are generated due to linear and nonlinear intermodal interaction. The mode-2 IW continues growing and gradually separates with the mode-1 IW during the generation process. The numerical results suggest that the pycnocline strength or thickness prominently affects the generation of mode-2 IWs, followed by pycnocline depth. A weakening or thinning pycnocline favors the generation of mode-2 IWs by evidently enhancing linear and nonlinear intermodal interaction, whereas a shoaling pycnocline favors a rapid growth rate mainly by enhancing linear intermodal interaction. The wave amplitude of an initial mode-1 IW strongly affects the generation of mode-2 IWs and increasing it can noticeably enlarge mode-2 IWs.  相似文献   

10.
经典唯象强度理论适用于正交各向异性线弹性体.对于非线性纤维增强复合材料,通过加卸载试验和损伤力学的分析方法,可以得到一种虚拟的线性化应力-应变关系;依据损伤等效假设,针对线性损伤和非线性损伤,对基于应力的经典二次失效准则进行变换,建立了一种基于损伤的强度理论,即"D失效判据",这一强度理论可以作为经典判据的补充和扩展.针对平纹编织C/SiC复合材料的拉/剪组合试验,进行了实例计算,结果表明:利用D失效判据预测的失效包络线比蔡-希尔准则的预测曲线低,而且,失效曲线的形式与材料的损伤演化规律相关.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号