首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 203 毫秒
1.
三维五向编织复合材料渐进损伤分析及强度预测   总被引:3,自引:0,他引:3  
基于五向编织复合材料连续体细观结构单胞,提出了材料的三维渐进损伤分析模型,采用非线性有限元方法并结合均匀化平均思想,建立了三维五向编织复合材料的强度预测胞元模型.经研究典型编织角材料在拉伸载荷作用下细观损伤的发生及演化过程,分析了材料的细观失效机理,获得了材料的宏观拉伸应力应变曲线和极限破坏强度,并详细探讨了工艺参数编织角对材料宏观力学性能的影响规律.  相似文献   

2.
三维编织复合材料渐进损伤的非线性模型及强度分析   总被引:1,自引:1,他引:0  
建立了考虑周期性位移边界条件的细观体胞模型,对三维编织复合材料的渐进损伤过程进行数值模拟。采用Eshelby-Mori—Tanaka方法计算含损伤裂纹的材料的剐度矩阵,并将有限元网格尺寸和单元裂纹尺寸引入损伤演化方程,有效地降低了模拟结果对有限元网格的依赖程度。通过计算得到了材料应力应变的非线性关系和失效时的极限强度,并分析了材料的破坏机理。结果表明,大编织角材料的破坏模式主要是基体失效与纤维横向拉剪破坏,模拟计算结果与文献中的实验值吻合较好。  相似文献   

3.
受有两级空洞损伤时韧性材料的力学行为   总被引:1,自引:0,他引:1  
本文利用大应变有限元方法研究了两级空洞对韧性材料的损伤作用.模型是以轴对称圆柱基体作为胞元,内含一初始的球型空洞.基体内的应力/应变随胞元外载的增大而达到临界状态,从而在围绕初级空洞的基体内将萌生次级空洞.后者是由空单元实现的.两级空洞的交互作用被证明将促进材料中的空洞化现象从而加速损伤并导至材料的总体弹性模量值在临近破断时急剧下降.  相似文献   

4.
三维编织复合材料渐进损伤的非线性数值分析   总被引:7,自引:0,他引:7  
徐焜  许希武 《力学学报》2007,39(3):398-407
基于考虑纤维束相互挤压的八边形纤维束截面单胞模型,引入周期性位移边界条件,采用 细观非线性有限元方法,建立了三维四向编织复合材料的渐进损伤拉伸强度模型. 该模型考 虑了增强体纤维束纵向非线性剪切应力-应变关系,采用Hashin型损伤失效准则定义了纤维 束的典型损伤类型,并根据纤维束和纯基体相应损伤类型所造成的材料性能退化,模拟了不 同编织角试件各类损伤产生、扩展及材料最终破坏的整个过程. 模型数值结果与实验数据吻 合较好,证明了该模型的合理有效性. 探讨了组分材料剪切非线性、损伤对材料宏观非线性 本构行为的影响,结果表明:随着编织角增大,纤维束剪切非线性效应和累积损伤对材料非 线性力学行为的影响明显增强.  相似文献   

5.
预估在非比例加载下薄金属板成型极限的损伤基力学模型   总被引:1,自引:0,他引:1  
探讨了用损伤基力学模型研究应变路径对薄金属板塑性失稳的影响,这种力学模型考虑了材料损伤作用.基于这种模型,在等效应变空问建立了考虑损伤的塑性失稳判据,并用以预估在比例或非比例加载下薄金属板成型极限曲线(FLC).借助这种理论模型和方法,预估薄金属板的理论成型极限曲线与Graf和Hosford的实验结果一致。  相似文献   

6.
张洁皓  段玥晨  侯玉亮  铁瑛  李成 《力学学报》2019,51(5):1411-1423
针对平纹编织复合材料低速冲击响应和损伤问题,提出了一种多尺度分析方法. 首先, 建立微观尺度单胞模型,引入周期性边界条件,采用最大主应力失效准则和直接刚度退化模型表征纤维丝和基体的损伤起始与演化,预测了纤维束的弹性性能和强度性能. 其次,将这些性能参数代入介观尺度单胞模型,基于Hashin和Hou的混合失效准则以及连续介质损伤模型对介观尺度单胞进行6种边界条件下的渐进损伤模拟.然后采用渐进均匀化方法,以介观尺度单胞为媒介预测了0$^\circ$和90$^\circ$子胞的性能参数,并建立平纹编织复合材料的子胞模型,进而扩展成为材料的宏观尺度低速冲击模型. 在此基础上,研究了平纹编织复合材料低速冲击下的力学响应与损伤特征.结果表明:宏观冲击仿真和试验吻合较好, 验证了多尺度方法的正确性;最大接触力、材料吸能和分层面积均随冲击能量的增大而增大,分层损伤轮廓逐渐从椭圆形向圆形转化;基体拉伸和压缩损伤的长轴方向分别与子胞材料主方向正交和一致,损伤面积前者远大于后者.   相似文献   

7.
多孔材料塑性极限载荷及其破坏模式分析   总被引:5,自引:1,他引:4  
运用塑性力学中的机动极限分析理论,研究韧性基体多孔材料的塑性极限承载能力和破坏模式。以多孔材料的细观结构为研究对象,将细观力学中的均匀化理论引入到塑性极限分析中,并结合有限元技术,建立细观结构极限载荷的一般计算格式,并提出相应的求解算法。数值算例表明:细观孔洞对材料的宏观强度影响明显;在单向拉伸作用下,孔洞呈现膨胀扩大规律;多孔材料破坏源于基体塑性区的贯通。  相似文献   

8.
唐炳涛 《力学学报》2016,48(1):146-153
为了应对节能减排及汽车安全性的双重要求,先进高强钢的开发和应用受到愈来愈高的重视.超高强度钢板热冲压成形技术是减轻车身重量、提高汽车抗冲击和防撞性能的重要途径,目前已经成为世界汽车制造行业的热门技术.成形极限是硼钢热冲压成形过程中一个非常重要的表征参数,但由于高温半球形凸模胀形试验(Nakazima)的复杂性造成实验测试面临诸多困难.针对硼钢热冲压成形过程特点,提出将韧性损伤模型与有限元数值模拟技术结合起来预测硼钢高温成形极限的方法.在连续体损伤力学基础上,建立了考虑有效应力和等效塑性应变对微孔损伤影响的勒迈特(Lemaitre)韧性损伤演化方程,在损伤耗散势函数中引入了等效塑性应变因子,从而寻找到能够准确反映硼钢在奥氏体状态下的成形特性的勒迈特耗散势函数.选取基于遗传算法的基于非支配排序的多目标优化算法(NSGA-II)与有限元分析软件"FORGETM"相结合的方法优化韧性损伤模型中材料的损伤因子,并利用优化后的损伤因子准确预测到板料成形过程的拉伸失稳和断裂现象.将建立的韧性损伤模型引入到硼钢高温半球形凸模胀形有限元仿真模型中,通过预测的成形极限与实验测定结果的比较,验证了所提韧性损伤模型预测硼钢高温成形极限的可靠性.  相似文献   

9.
基于均匀化理论韧性复合材料塑性极限分析   总被引:6,自引:0,他引:6  
运用细观力学中的均匀化方法分析了韧性复合材料的塑性极限承载能力.从反映复合材料细观结构的代表性胞元入手,将均匀化理论运用到塑性极限分析中,计算由理想刚塑性、Mises组分材料构成的复合材料的极限承载能力.运用机动极限方法和有限元技术,最终将上述问题归结为求解一组带等式约束的非线性数学规划问题,并采用一种无搜索直接迭代算法求解.为复合材料的强度分析提供了一个有效手段.  相似文献   

10.
颗粒增强复合材料的界面开裂与尺度效应   总被引:1,自引:1,他引:0  
采用基于Huang等提出的塑性应变梯度传统理论发展的有限元方法,模拟了颗粒增强金属基复合材料的界面开裂与颗粒尺度效应.分别针对考虑颗粒与基体间界面开裂和不开裂两种情况进行分析,并将考虑界面开裂的模拟结果与实验结果进行比较,证明了模型的有效性,同时也获得应变梯度理论中所包含的材料特征尺度参量的取值.  相似文献   

11.
This paper presents the application of anisotropic damage theory to the study of forming limit diagram of A12024T3 aluminum alloy sheet. In the prediction of limiting strains of the aluminum sheet structure, a finite element cell model has been constructed. The cell model consists of two phases, the aluminum alloy matrix and the intermetallic cluster. The material behavior of the aluminum alloy matrix is described with a fully coupled elasto-plastic damage constitutive equation. The intermetallic cluster is assumed to be elastic and brittle. By varying the stretching ratio, the limiting strains of the sheet under biaxial stretching have been predicted by using the necking criterion proposed. The prediction is in good agreement with the experimental findings. Moreover, the finite element cell model can provide information for understanding the microscopic damage mechanism of the aluminum alloy. Over-estimation of the limit strains may result if the effect of material damage is ignored in the sheet metal forming study.  相似文献   

12.
The effect of particle clustering on void damage rates in a ductile material under triaxial loading conditions is examined using three-dimensional finite element analysis. An infinite material containing a regular distribution of clustered particles is modelled using a unit cell approach. Three discrete particles are introduced into each unit cell while a secondary population of small particles within the surrounding matrix is represented using the Gurson-Tvergaard-Needleman (GTN) constitutive equations. Deformation strain states characteristic of sheet metal forming are considered; that is, deep drawing, plane strain and biaxial stretching. Uniaxial tensile stress states with varying levels of superimposed hydrostatic tension are also examined.The orientation of a particle cluster with respect to the direction of major principal loading is shown to significantly influence failure strains. Coalescence of voids within a first-order particle cluster (consisting of three particles) is a stable event while collapse of inter-cluster ligaments leads to imminent material collapse through void-sheeting.  相似文献   

13.
The Marciniak and Kuczynski (M–K) model for necking prediction in sheet metal forming was based on the in-plane forming. Bending which was resulted from out-of-plane forming was not considered in the M–K model. Whereas most of the sheet metal forming processes and also standard test of hemispherical punch for forming limit diagram are out-of-plane forming, it is important to consider bending effect in the M–K model. Therefore, in this study bending strain is added to stretching strain of M–K model and a new model is presented for forming limit diagram (FLD) prediction. This modified M–K (MM–K) model is written in the python programming language and it is used as a post-processing criterion for FLD prediction in the commercial software Abaqus. The MM–K model was used to predict FLD and weld line movement in the tailor welded blank forming. It was found that the predicted results by MM–K model are in a good agreement with experimental data.  相似文献   

14.
Summary  A criterion for ductile fracture is introduced in the finite element simulation of sheet metal forming. From the calculated histories of stress and strain in each element, the fracture initiation site and the critical stroke are predicted by means of the ductile fracture criterion. The calculations are carried out for axisymmetric stretch forming of various aluminium alloy sheets and their laminates clad by mild steel sheets. The predictions so obtained are compared with experimental observations. The results show that the combination of the finite element simulation and the ductile fracture criterion enables the prediction of forming limit in a wide range of sheet metals. Accepted for publication 11 August 1996  相似文献   

15.
Sheet metal forming processes generally involve large deformations together with complex loading sequences. In order to improve numerical simulation predictions of sheet part forming, physically-based constitutive models are often required. The main objective of this paper is to analyze the strain localization phenomenon during the plastic deformation of sheet metals in the context of such advanced constitutive models. Most often, an accurate prediction of localization requires damage to be considered in the finite element simulation. For this purpose, an advanced, anisotropic elastic–plastic model, formulated within the large strain framework and taking strain-path changes into account, has been coupled with an isotropic damage model. This coupling is carried out within the framework of continuum damage mechanics. In order to detect the strain localization during sheet metal forming, Rice’s localization criterion has been considered, thus predicting the limit strains at the occurrence of shear bands as well as their orientation. The coupled elastic–plastic-damage model has been implemented in Abaqus/implicit. The application of the model to the prediction of Forming Limit Diagrams (FLDs) provided results that are consistent with the literature and emphasized the impact of the hardening model on the strain-path dependency of the FLD. The fully three-dimensional formulation adopted in the numerical development allowed for some new results – e.g. the out-of-plane orientation of the normal to the localization band, as well as more realistic values for its in-plane orientation.  相似文献   

16.
The paper presents a study of the Marciniak and Kuczynski (MK for short) model for the prediction of limit strains of orthotropic sheet metal under in-plane proportional biaxial stretching. In two particular cases analytical results can be obtained if the groove of the MK model is oriented along one of the in-plane symmetry axes. The first case is the plane strain loading mode. Necessary and sufficient conditions are derived for the MK-predicted plane strain limit strain to match exactly the experimentally measured limit strain. An example of material, the AA5182-O aluminum alloy, that does not satisfy these conditions is discussed. It is shown then that if a power-law strain rate sensitivity is included in the hardening law then the MK-model can match exactly any target plane strain limit strain. The second case is the non-hardening case for positive strain ratios. This case allows for an insight into the way the MK-predicted limit strains depend upon the yield function. Based on the theory developed for the plane strain case, material heterogeneity as a possible cause for unstable plastic flow is further discussed. It is shown that such heterogeneities can be modeled by perturbing the rate of deformation with an eigenstrain. This allows for an extension of the MK-model to sheets of uniform thickness.  相似文献   

17.
A linked FEM-damage percolation model of aluminum alloy sheet forming   总被引:2,自引:0,他引:2  
A so-called damage percolation model is linked with a finite element model of a sheet forming process to offer a comprehensive study of ductile damage evolution. In the current study, a damage percolation code is linked with LS-DYNA, an explicit dynamic FEM code used to introduce local strain gradients and compliance effects due to damage-induced softening. The linked model utilizes a Gurson-based yield surface to account for the softening effects of void damage, while the local damage development and void linkage events are modeled using the damage percolation code. The percolation code accepts detailed second phase particle fields from image analysis of a 2.0×1.6 mm optical micrograph of AA5182 aluminum alloy sheet. The model is applied to a stretch-flange stamping process which is known to be a damage-sensitive operation. The critical conditions for fracture are predicted for various initial stretch flange hole sizes.  相似文献   

18.
The temperature-dependent Barlat YLD96 anisotropic yield function developed previously [Forming of aluminum alloys at elevated temperatures – Part 1: Material characterization. Int. J. Plasticity, 2005a] was applied to the forming simulation of AA3003-H111 aluminum alloy sheets. The cutting-plane algorithm for the integration of a general class of elasto-plastic constitutive models was used to implement this yield function into the commercial FEM code LS-Dyna as a user material subroutine (UMAT). The temperature-dependent material model was used to simulate the coupled thermo-mechanical finite element analysis of the stamping of an aluminum sheet using a hemispherical punch under the pure stretch boundary condition. In order to evaluate the accuracy of the UMAT’s ability to predict both forming behavior and failure locations, simulation results were compared with experimental data performed at several elevated temperatures. Forming limit diagrams (FLDs) were developed for the AA3003-H111 at several elevated temperatures using the M-K model in order to predict the location of the failure in the numerical simulations. The favorable comparison found between the numerical and experimental data shows that a promising future exists for the development of more accurate temperature-dependent yield functions to apply to thermo-hydroforming process.  相似文献   

19.
板材多点成形过程的有限元分析   总被引:8,自引:0,他引:8  
多点成形过程采用静力隐式格式进行数值模拟是比较合适的。本文建立了用于多点成形过程分析的静力隐式弹塑性大变形有限元方法 ,给出了对稳定迭代收敛过程效果较好的板壳有限单元模型、处理多点不连续接触边界的接触单元方法以及增量变形过程中应力及塑性应变计算的多步回映计算方法。基于这些方法编制了计算软件 ,应用该软件进行了矩形板的液压胀形过程及球形模具拉伸成形过程的有限元分析 ,数值计算结果与典型的实验结果及计算结果吻合很好。最后给出了球形、圆柱形目标形状的实际多点成形过程的数值模拟结果。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号