Equations of viscous supersonic jets with a high degree of overexpansion

A complete system of equations determining a viscous laminar, strongly overexpanded jet is obtained; the system is formed by shortened Navier—Stokes equations, equations for the metric of a coordinate system related with the form of the jet, and equations of transition from curvilinear coordinates to Cartesian. The problem of calculating the jet is formulated as a Cauchy problem for this system. Two- and three-dimensional flows are examined. Possible swirling of the jet is taken into account.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 137–147, March–April, 1977.     

Interaction of a supersonic flow with a transverse jet injected through a circular aperture in a plate

A flow pattern created by the interaction of a supersonic flow with a transverse sonic or supersonic jet injected normally to the direction of the main flow through a circular aperture in a plate is considered. The pressure rises in front of the jet owing to the retarding action of the incident flow. The boundary layer building up on the wall in front of the injection nozzle is accordingly detached. The flow pattern in the region of interaction between the jet and the external flow is illustrated in Fig. 1. The three-dimensional zone of detachment thus formed deflects the incident flow from the wall, and in front of the jet a complicated system of sharp jumps in contraction develops. A three-dimensional system of jumps also develops in the jet itself.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No, 5, pp. 193–197, September–October, 1970.     

Impact of a figure of revolution in a stream of incompressible fluid with separation of a jet

The impact interaction of bodies with a fluid in a flow with jet separation has been considered in [1–3], for example. This investigation was in the two-dimensional formulation. The present paper considers the three-dimensional problem of impact of a figure of revolution in a stream of an ideal incompressible fluid with separation of a jet in accordance with Kirchhoff's scheme. A boundary-value problem is formulated for the impact flow potential and solved by the Green's function method. A method for constructing the Green's function is described. Expressions are given for the coefficients of the apparent masses. The results are given of computer calculations of these coefficients in the case of a cone using the flow geometry of the corresponding two-dimensional problem.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 176–180, November–December, 1980.     

Parameters of jets out of rectangular nozzles when they are free or near a screen

The results are given of an experimental determination of the parameters of jets out of rectangular nozzles. The distributions of the mean velocity and an impurity concentration were measured. The rearrangement of the jet flow associated with the three-dimensional structure of the jet and interaction of the jet and a screen was investigated. A model that describes the occurrence of a pressure difference and curvature of the jet trajectory when it interacts with a screen is proposed.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 39–48, July–August, 1979.     

Interaction of a transverse gas jet with supersonic flow in a dihedral

The results of an experimental investigation of supersonic flow at the Mach number M₁=3 past a transverse gas jet flowing from an orifice in the edge of a dihedral with a linear angle of 90° are presented. The Mach number of the jet was varied from 1 to 3, and the ratio of the total pressure in the jet to the free stream pressure from 90 to 760. Visualization of the flow near the faces of the dihedral revealed the existence of internal lines of flow convergence and divergence in the region of three-dimensional separated flow, which indicates the presence of complex vortex structures. The dependence of the dimensions of the separated flow zone and the characteristic pressures in it on the jet parameters is explored.Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 6, pp. 161–165, November–December, 1994.     

Flow in the zones of separation of a turbulent boundary layer in front of a subsonic jet injected through a circular nozzle

Flow taking place in the three-dimensional region of separation formed by the interaction of a subsonic stream with a single subsonic jet emerging from a circular hole in a plate perpendicular to the stream is considered. The aim of the investigation is to discover the physical characteristics of the flow in the three-dimensional separation zone in front of a subsonic jet obstacle and to determine the principal laws governing the geometrical and hydrodynamic characteristics of the flow as functions of the parameters of the driving stream and jet.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 34–41, May–June, 1973.     

Propagation of a turbulent jet impinging on a plane surface in an external stream

The results of an investigation of the three-dimensional vortex zone which forms near a plane surface when a turbulent jet impinges on it in an external stream are presented. Problems of this kind occur, for example, in a study of the effects of the entry of exhaust gases into the air intakes of engines when aircraft with thrust reversers turned on fly through an airport and when vertical-take-off-and-landing aircraft move near the earth [1–3]. The structure of the vortex zone and the temperature distribution in it are established.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 56–62, September–October, 1978.In conclusion, the author thanks A. N. Sekundov and S. Yu. Krasheninnikov for attention to the work and a discussion of its results.     

Three-dimensional interaction of a freely expanding jet with obstacles

A numerical scheme is proposed for calculating the steady three-dimensional flow in the subsonic and transonic regions of interaction of a freely expanding jet and an infinite flat obstacle at angles of attack up to 20 ° and the end of a cylinder placed relative to the jet axis at a distance up to ten nozzle radii. Results of calculations are given.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 22–27, January–February, 1981.We thank A. P. Zyuzin for making a number of calculations.     

Dynamical equations for a liquid jet

Equations are described for the three-dimensional motion of a thin jet of viscous liquid. The jet is a liquid body whose transverse dimensions are small compared with the other characteristic dimensions of the problem. The aim in the present paper is to establish a closed system of asymptotic equations for the dynamics of such a thin jet. A more detailed derivation of quasi-one-dimensional asymptotic equations for the dynamics of thin liquid jets and an analysis on the basis of them of the curved decay shape of the jet in the linear and nonlinear stages is contained in [1, 2].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 11–18, September–October, 1980.     

On the possibility of blowing a gas jet into a supersonic flow without formation of a three-dimensional boundary-layer separation zone

We consider the flow formed by the interaction of a supersonic flow and a transverse sonic or supersonic jet blown at right angles to the direction of the main flow through a nozzle whose exit section is in a flat wall. When a gas jet is blown through a circular opening [1] the pressure rises in front of the jet because of the stagnation of the oncoming flow. This leads to separation of the boundary layer formed on the wall in front of the blowing nozzle. The resulting three-dimensional separation zone leads to a sharp increase in the pressure and the heat fluxes to the wall in front of the blowing nozzle, which is undesirable in many modern applications. The aim of the present investigation was to find a shape of the exit section of the blowing nozzle for which there is no three-dimensional separation zone of the boundary layer in front of the blowing nozzle.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 162–165, May–June, 1979.     

Spread of jet from an annular slit around an air intake

The results of an experimental investigation of the flow created by a conical jet spreading from a narrow slit around the periphery of a suction intake are described. The reorganization of the jet flow associated with the resulting three-dimensional flow structure is investigated. A flow scheme is proposed.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 187–190, March–April, 1991.     

Three-dimensional laminar boundary layer on a permeable surface in the neighborhood of a symmetry plane

Analytical and numerical methods are used to investigate a three-dimensional laminar boundary layer near symmetry planes of blunt bodies in supersonic gas flows. In the first approximation of an integral method of successive approximation an analytic solution to the problem is obtained that is valid for an impermeable surface, for small values of the blowing parameter, and arbitrary values of the suction parameter. An asymptotic solution is obtained for large values of the blowing or suction parameters in the case when the velocity vector of the blown gas makes an acute angle with the velocity vector of the external flow on the surface of the body. Some results are given of the numerical solution of the problem for bodies of different shapes and a wide range of angles of attack and blowing and suction parameters. The analytic and numerical solutions are compared and the region of applicability of the analytic expressions is estimated. On the basis of the solutions obtained in the present work and that of other authors, a formula is proposed for calculating the heat fluxes to a perfectly catalytic surface at a symmetry plane of blunt bodies in a supersonic flow of dissociated and ionized air at different angles of attack. Flow near symmetry planes on an impermeable surface or for weak blowing was considered earlier in the framework of the theory of a laminar boundary layer in [1–4]. An asymptotic solution to the equations of a three-dimensional boundary layer in the case of strong normal blowing or suction is given in [5, 6].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 37–48, September–October, 1980.     

Analysis and reconstruction of a pulsed jet in crossflow by multi-plane snapshot POD

In this work, snapshot proper orthogonal decomposition (POD) is used to study a pulsed jet in crossflow where the velocity fields are extracted from stereoscopic particle image velocimetry (SPIV) results. The studied pulsed jet is characterized by a frequency f = 1 Hz, a Reynolds number Re _j  = 500 (based on the mean jet velocity ${\overline{U}_{j}}$  = 1.67 cm/s and a mean velocity ratio of R = 1). Pulsed jet and continuous jet are compared via mean velocity field trajectory and Q criterion. POD results of instantaneous, phase-averaged and fluctuating velocity fields are presented and compared in this paper. Snapshot POD applied on one plane allows us to distinguish an organization of the first spatial eigenmodes. A distinction between “natural modes” and “pulsed modes” is achieved with the results obtained by the pulsed and unforced jet. Secondly, the correlation tensor is established with four parallel planes (multi-plane snapshot POD) for the evaluation of volume spatial modes. These resulting modes are interpolated and the volume velocity field is reconstructed with a minimal number of modes for all the times of the pulsation period. These reconstructions are compared to orthogonal measurements to the transverse jet in order to validate the obtained three-dimensional velocity fields. Finally, this POD approach for the 3D flow field reconstruction from experimental data issued from planes parallel to the flow seems capable to extract relevant information from a complex three-dimensional flow and can be an alternative to tomo-PIV for large volume of measurement.     

Singularity in the solution of the equations of a three-dimensional boundary layer due to the collision of wall jets

The problem of the propagation of a three-dimensional jet of viscid incompressible fluid flowing from a narrow curved slot into a fluid-filled space along a rigid plane is considered within the framework of the equations of a steady laminar boundary layer. A class of initial conditions at the slot outlet which generates in the jet a velocity field without secondary flows is identified. Within this class the boundaryvalue problem for the three-dimensional boundary layer can be divided into two problems of lower dimensionality: a dynamic and a kinematic problem. As a result of the analysis of the kinematic problem the general structure of the regions of existence and uniqueness of the solution is determined. An investigation of the dynamic problem shows that as the boundaries of the region of existence are approached a singularity characterized by an infinite increase in the thickness of the jet is formed in the solution of the boundary layer equations.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 75–81, July–August, 1991.     

Calculation of interaction of a turbulent near-wake behind a step with a supersonic jet

Existing computational methods [1–5] do not enable one to calculate complex flows behind steps, accounting for nonuniformity of the incident supersonic flow and the effect of compression and expansion waves arriving in the near-wake region. For example, computational methods based on the methods of [1] or [2] are used mainly in uniform supersonic flow ahead of the base edge and, for the most part, cannot be used to calculate flow in annular nozzles with irregular conditions. An exception is reference [6], which investigated flow in an annular nozzle behind a cylindrical center-body. The present paper suggests a method, based on references [7, 8] for calculating the base pressure behind two-dimensional and three-dimensional steps, washed by a supersonic jet.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 6, pp. 43–51, November– December 1977.     

Development of finite-amplitude two-dimensional and three-dimensional disturbances in jet flows

The laminar-turbulent transition zone is investigated for a broad class of jet flows. The problem is considered in terms of the inviscid model. The solution of the initial-boundary value problem for three-dimensional unsteady Euler equations is found by the Bubnov-Galerkin method using the generalized Rayleigh approach [1–4]. The occurrence, subsequent nonlinear evolution and interaction of two-dimensional wave disturbances are studied, together with their secondary instability with respect to three-dimensional disturbances.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 8–19, September–October, 1985.     

Spatial interaction of jets propagating in an accompanying supersonic flow

A numerical method of calculating a three-dimensional laminar supersonic underexpanded jet escaping into an accompanying supersonic flow is developed. The simplified Navier-Stokes equations for a steady-state three-dimensional flow are employed. Numerical calculations are carried out for several cases relating the outflow of jets from a four-nozzle assembly into an accompanying supersonic flow, and a number of the characteristics of three-dimensional flows of this kind are presented.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 88–93, November–December, 1972.     

“Lateral” interaction of a supersonic underexpanded ideal-gas jet with surfaces of different shape

A numerical investigation is made of the interaction of an underexpanded jet of an inviscid and nonheat-conducting gas issuing from an axisymmetric conical nozzle with plane, cylindrical, and spherical surfaces. It is assumed that the flow turning angle for flow about a barrier is smaller than the critical angle, and subsonic regions are absent in the flow field studied. The effect of the characteristic parameters (Mach number at the nozzle exit, jet underexpansion) on the flow pattern and jet forces is analyzed. The results of numerical calculations are compared to the results of approximate theories and experimental data. A theoretical solution of the problem of the effect of a supersonic jet on a surface of given shape, even in the approximation of an inviscid, nonheat-conducting gas, is quite difficult. A reason for this is that the flow region contains shock waves interacting with each other, contact discontinuities, and zones of mixed sub-and supersonic flow. As far as is known to the authors, the results obtained for three-dimensional problems for the interaction of supersonic jets with each other or with barriers are primarily experimental (for example, [1–6]). A numerical analysis of the interaction of axisymmetric ideal-gas jets was carried out in [7–10]. In [7] a three-dimensional form of the method of characteristics was used to calculate the initial interaction region for two supersonic cylindrical jets (with Mach number M=10) intersecting at an angle of 60. The interaction of several jets has been considered in [8, 9], where the solution was obtained according to the Lax—Wendroff method without elimination of the discontinuity lines of flow parameters. In [10] the lateral interaction of axisymmetric supersonic jets with each other and with a plate is investigated by means of a straight-through calculationTranslated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 3–8, November–December, 1974.The authors thank A. N. Kraiko for useful discussions of the results, and A. L. Isakov and É. N. Gasparyan for kindly providing the experimental data.     

Control of a submerged jet in a thin rectangular cavity

An innovative method is presented for control of an oscillatory turbulent jet in a thin rectangular cavity with a thickness to width ratio of 0.16. Jet flow control is achieved by mass injection of a secondary jet into the region above the submerged primary jet nozzle exit and perpendicular to the primary nozzle axis. An experimental model, a 2-D and a 3-D computational fluid dynamics (CFD) model are used to investigate the flow characteristics under various secondary injection mass flow rates and injection positions. Two-dimensional laser Doppler anemometry (LDA) measurements are compared with results from the CFD models, which incorporate a standard k–ε turbulence model or a 2-D and 3-D realisable k–ε model. Experimental results show deflection angles up to 23.3° for 24.6% of relative secondary mass flow are possible. The key to high jet control sensitivity is found to be lateral jet momentum with the optimum injection position at 12% of cavity width (31.6% of the primary nozzle length) above the primary nozzle exit. CFD results also show that a standard k–ε turbulence closure with nonequilibrium wall functions provides the best predictions of the flow.     

Escape of a turbulent jet under the effect of acoustic perturbations

Results are presented of experimental investigations of the local effect of acoustic oscillations of different frequency and constant intensity on the root part of a nonisothermal axisymmetric subsonic turbulent jet escaping from a gas jet atomizer at a different velocity in the S = 0.053–3.84 range of Strouhaille numbers. Data have been obtained indicating the presence of unstable escape modes of a subsonic turbulent jet in an acoustic field; experimental dependences are presented of the relative aperture of the turbulent jet flowing in an acoustic field as a function of various parameters.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 1, pp. 58–62, January–February, 1972.The author is grateful to A. S. Ginevskii and B. S. Burikov for discussing the results of this paper, and also to A. S. Modnov and R. A. Arkhipova for assistance in conducting and processing the experiments.