准静态变形破坏的近场动力学分析

基于近场动力学理论,提出新的更能反映非局部长程力特性的物质点间作用力函数,并通过在物质点运动方程中引入局部阻尼、构造分级加载算法和系统失衡判断准则,实现了采用统一的近场动力学模型和算法进行从准静态变形、裂纹萌生和扩展直至结构破坏全过程的连续模拟和准确定量计算。     

Static, stability and dynamic analysis of gradient elastic flexural Kirchhoff plates

The governing equation of motion of gradient elastic flexural Kirchhoff plates, including the effect of in-plane constant forces on bending, is explicitly derived. This is accomplished by appropriately combining the equations of flexural motion in terms of moments, shear and in-plane forces, the moment–stress relations and the stress–strain equations of a simple strain gradient elastic theory with just one constant (the internal length squared), in addition to the two classical elastic moduli. The resulting partial differential equation in terms of the lateral deflection of the plate is of the sixth order instead of the fourth, which is the case for the classical elastic case. Three boundary value problems dealing with static, stability and dynamic analysis of a rectangular simply supported all-around gradient elastic flexural plate are solved analytically. Non-classical boundary conditions, in additional to the classical ones, have to be utilized. An assessment of the effect of the gradient coefficient on the static or dynamic response of the plate, its buckling load and natural frequencies is also made by comparing the gradient type of solutions against the classical ones.     

Stability analysis of functionally graded rectangular plates under nonlinearly varying in-plane loading resting on elastic foundation

In this research work, an exact analytical solution for buckling of functionally graded rectangular plates subjected to non-uniformly distributed in-plane loading acting on two opposite simply supported edges is developed. It is assumed that the plate rests on two-parameter elastic foundation and its material properties vary through the thickness of the plate as a power function. The neutral surface position for such plate is determined, and the classical plate theory based on exact neutral surface position is employed to derive the governing stability equations. Considering Levy-type solution, the buckling equation reduces to an ordinary differential equation with variable coefficients. An exact analytical solution is obtained for this equation in the form of power series using the method of Frobenius. By considering sufficient terms in power series, the critical buckling load of functionally graded plate with different boundary conditions is determined. The accuracy of presented results is verified by appropriate convergence study, and the results are checked with those available in related literature. Furthermore, the effects of power of functionally graded material, aspect ratio, foundation stiffness coefficients and in-plane loading configuration together with different combinations of boundary conditions on the critical buckling load of functionally graded rectangular thin plate are studied.     

热载荷作用下梯度多孔材料梁弯曲及过屈曲力学行为的研究

基于Bernoulli-Euler梁理论,引入物理中面解耦了复合材料结构的面内变形与横向弯曲特性,研究了梯度多孔材料矩形截面梁在热载荷作用下的弯曲及过屈曲力学行为．假设沿梁厚度方向材料的性质是连续变化的,利用能量法推导了矩形截面梁的控制微分方程和边界条件,并用打靶法对无量纲化的控制方程进行数值求解．利用计算得到的结果分析了材料的性质、热载荷、边界条件对矩形截面梁非线性力学行为的影响．结果表明,对称材料模型下,固支梁与简支梁均显示出了典型的分支屈曲行为特征,而其临界屈曲热载荷值均会随着孔隙率系数的增加而单调增加．非对称材料模型下,固支梁仍显示出分支屈曲行为特征,但其临界屈曲热载荷不再随着孔隙率系数的变化而单调变化;而对于两端简支梁,发生了弯曲变形,弯曲挠度随载荷的增大而增大．     

Buckling analysis of functionally graded arbitrary straight-sided quadrilateral plates on elastic foundations

As a first endeavor, the buckling analysis of functionally graded (FG) arbitrary straight-sided quadrilateral plates rested on two-parameter elastic foundation under in-plane loads is presented. The formulation is based on the first order shear deformation theory (FSDT). The material properties are assumed to be graded in the thickness direction. The solution procedure is composed of transforming the governing equations from physical domain to computational domain and then discretization of the spatial derivatives by employing the differential quadrature method (DQM) as an efficient and accurate numerical tool. After studying the convergence of the method, its accuracy is demonstrated by comparing the obtained solutions with the existing results in literature for isotropic skew and FG rectangular plates. Then, the effects of thickness-to-length ratio, elastic foundation parameters, volume fraction index, geometrical shape and the boundary conditions on the critical buckling load parameter of the FG plates are studied.     

Small-scale effects on the buckling of quadrilateral nanoplates based on nonlocal elasticity theory using the Galerkin method

The elastic buckling behavior of quadrilateral single-layered graphene sheets (SLGS) under bi-axial compression is studied employing nonlocal continuum mechanics. Small-scale effects are taken into consideration. The principle of virtual work is employed to derive the governing equations. The Galerkin method in conjunction with the natural coordinates of the nanoplate is used as a basis for the analysis. The buckling load of skew, rhombic, trapezoidal, and rectangular nanoplates considering various geometrical parameters are obtained. It is shown that nonlocal effects are very important in arbitrary quadrilateral graphene sheets and their inclusion results in smaller buckling loads. Also the effects of geometrical parameters such as aspect ratio, angle, and mode number on the buckling load decrease when scale coefficient increases, for all arbitrary quadrilateral SLGS.     

弹性地基上多孔功能梯度材料矩形板的自由振动与临界屈曲载荷分析

多孔功能梯度材料(FGM)构件的特性与孔隙率和孔隙分布形式有密切关系。本文基于经典板理论,考虑不同孔隙分布形式时修正的混合率模型,研究Winkler弹性地基上四边受压多孔FGM矩形板的自由振动与临界屈曲载荷特性。首先利用Hamilton原理和物理中面的定义推导Winkler弹性地基上四边受压多孔FGM矩形板自由振动的控制微分方程并进行无量纲化,然后应用微分变换法(DTM)对无量纲控制微分方程和边界条件进行变换,得到计算无量纲固有频率和临界屈曲载荷的代数特征方程。将问题退化为孔隙率为零时的FGM矩形板并与已有文献进行对比以验证其有效性。最后计算并分析了梯度指数、孔隙率、地基刚度系数、长宽比、四边受压载荷及边界条件对多孔FGM矩形板无量纲固有频率的影响以及各参数对无量纲临界屈曲载荷的影响。     

Three-dimensional stability of a rectangular plate under uniaxial tension

The paper studies the three-dimensional stability of an isotropic, linear elastic, rectangular plate under a uniform tensile load applied to its sides. The concept of free strains is used to reduce the three-dimensional problem to a two-dimensional one. It is solved using the three-dimensional linearized theory of stability. An approximate solution of the buckling problem is obtained by the finite-difference method. Numerical results are presented __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 7, pp. 116–123, July 2006.     

Nonlinear in-plane thermal buckling of rotationally restrained functionally graded carbon nanotube reinforced composite shallow arches under uniform radial loading

The nonlinear in-plane instability of functionally graded carbon nanotube reinforced composite (FG-CNTRC) shallow circular arches with rotational constraints subject to a uniform radial load in a thermal environment is investigated. Assuming arches with thickness-graded material properties, four different distribution patterns of carbon nanotubes (CNTs) are considered. The classical arch theory and Donnell’s shallow shell theory assumptions are used to evaluate the arch displacement field, and the analytical solutions of buckling equilibrium equations and buckling loads are obtained by using the principle of virtual work. The critical geometric parameters are introduced to determine the criteria for buckling mode switching. Parametric studies are carried out to demonstrate the effects of temperature variations, material parameters, geometric parameters, and elastic constraints on the stability of the arch. It is found that increasing the volume fraction of CNTs and distributing CNTs away from the neutral axis significantly enhance the bending stiffness of the arch. In addition, the pretension and initial displacement caused by the temperature field have significant effects on the buckling behavior.     

Thermoelastic buckling behavior of thick functionally graded rectangular plates

Thermoelastic buckling behavior of thick rectangular plate made of functionally graded materials is investigated in this article. The material properties of the plate are assumed to vary continuously through the thickness of the plate according to a power-law distribution. Three types of thermal loading as uniform temperature raise, nonlinear and linear temperature distribution through the thickness of plate are considered. The coupled governing stability equations are derived based on the Reddy’s higher-order shear deformation plate theory using the energy method. The resulted stability equations are decoupled and solved analytically for the functionally graded rectangular plates with two opposite edges simply supported subjected to different types of thermal loading. A comparison of the present results with those available in the literature is carried out to establish the accuracy of the presented analytical method. The influences of power of functionally graded material, plate thickness, aspect ratio, thermal loading conditions and boundary conditions on the critical buckling temperature of aluminum/alumina functionally graded rectangular plates are investigated and discussed in detail. The critical buckling temperatures of thick functionally graded rectangular plates with various boundary conditions are reported for the first time and can be served as benchmark results for researchers to validate their numerical and analytical methods in the future.