On the size of the hysteresis in pseudoelasticity

Pseudoelasticity is a phenomenon that occurs in alloys with shape memory: In a loading-unloading cycle a body will return to its original configuration, but its path in a load-deformation diagram will run through a hysteresis loop.Pseudoelastic behaviour can be modelled by statistical mechanics which produces a non-monotone load-deformation isotherm. Once such a nonmonotone curve has been calculated there is the possibility of a phase transition that is connected with a hysteresis loop.The paper describes a method for the calculation of the width of the hysteresis. It comes to the conclusion that this width is determined by the interfacial energy associated with domain boundaries between the phases. The bigger that energy is the bigger is the hysteresis loop.     

A SIMPLE CONSTITUTIVE MODEL FOR FERROELECTRIC CERAMICS UNDER ELECTRICAL/MECHANICAL LOADING

A simple phenomenological model is developed for describing the macroscopic constitutive response of ferroelectric materials based on consideration of the fact that domain switching is a progressive evolution process with loading. The volume fraction of domain switching is taken as an internal variable, which is derived from the domain nucleation theory. The proposed theory can simulate the dielectric hysteresis, reversed butterfly hysteresis, nonlinear strain-stress hysteresis, as well as electric displacement-stress relation of ferroelectric materials. Its comparison with experimental results and two other theoretical models reveals that the model presented can well predict the nonlinear hysteresis of ferroelectrics under electrical or mechanical loading.     

煤系页岩瓦斯吸附?解吸迟滞效应核磁共振谱实验研究

煤系页岩瓦斯主要以吸附态和游离态形式存在, 其解吸过程相对吸附过程具有普遍滞后现象, 因此从微细观角度定量研究其吸附?附解吸迟滞规律对页岩气井后期稳产增产具有重要意义. 在前人研究基础上结合核磁共振谱理论推导出能够准确表征煤系页岩瓦斯吸附?解吸迟滞效应微细观评价模型, 并采用核磁共振谱测试技术, 以双鸭山盆地东保卫煤矿三采区36# 煤层底板煤系页岩为研究对象, 进行煤系页岩瓦斯吸附?解吸迟滞效应核磁共振谱实验, 模拟不同储层原位应力状态煤系页岩瓦斯迟滞效应发生全过程, 进一步对吸附态瓦斯、游离态瓦斯以及微细观方法测定的宏观瓦斯迟滞规律进行定量化研究, 并对其发生机理以及其对深部煤系页岩瓦斯开采影响进行了初步探究. 结果表明: 应力状态下吸附态和游离瓦斯均有滞后效应; 瓦斯宏观迟滞系数与平均有效应力呈幂函数关系, 而瓦斯宏观迟滞效应中由吸附态或游离态瓦斯引起的迟滞系数与平均有效应力关系均可采用二次多项式拟合; 孔裂隙应力损伤和微孔隙瓦斯扩散受限耦合或许是煤系页岩瓦斯吸附?解吸迟滞效应产生根本原因之一.      

Numerical calculation of FSS/RSS transition in highly overexpanded rocket nozzle flows

Turbulent flow separation in over-expanded rocket nozzles is investigated numerically in a sub-scale parabolic nozzle fed with cold nitrogen. Depending upon the feeding to ambient pressure ratio either a free shock separation or a restricted shock separation is computed, with a significant hysteresis between these two flow regimes. This hysteresis was also found in experimental tests with the same nozzle geometry. The present study is mainly focused on the transition between the two shock separation patterns. The analysis of the numerical solutions aims to provide clues for the explanation of the hysteresis cycle.     

Hysteresis in shape-memory alloys

We present an overview of hysteresis phenomena in the martensitic transformation, and their relevance in the thermomechanical behaviour of shape-memory alloys. The first part of the paper introduces the concept of hysteresis, and the related phenomena of branching, dissipation and memory. The second part deals with revising some aspects of the thermomechanical behaviour of shape-memory alloys, emphasizing the hysteretic behaviour of single crystals and polycrystals under different driving conditions. The last part of the work is dedicated to the problem of modelling hysteresis phenomena in shape-memory alloys. Our focus is on phenomenological approaches which, as shown in the paper, account for the memory properties observed in hysteretic trajectories and open the possibility of deriving a generic energy balance for systems with hysteresis.     

超磁致伸缩材料的擦除特性和同余特性实验研究

超磁致伸缩材料在力磁耦合作用下具有复杂的迟滞响应。Preisach模型可有效描述物理过程中的滞后现象,它具有两个重要特性,即擦除特性和同余特性。擦除特性是指输入局部极大值擦除了加载过程中小于该值的所有极大值,或输入局部极小值擦除了加载过程中大于该值的所有极小值,同时,与这些历史极值相应的加载历史也被擦除,不再影响之后的输出。同余特性是指输入极大值与极小值相同的所有闭合曲线一致。本文通过实验系统地研究了超磁致伸缩材料在多轴力磁耦合场作用下的磁致伸缩曲线、磁滞回线和应力应变的迟滞行为,发现其在力磁耦合下的非线性滞后行为具有擦除特性和同余特性。这满足了Preisach模型描述滞后现象的两个基本要求,验证了利用Preisach模型描述超磁致伸缩材料迟滞行为的可行性,为超磁致伸缩材料的非线性理论和器件设计提供了依据。     

Adhesion and friction of an elastic half-space in contact with a slightly wavy rigid surface

The paper deals with the estimation of the pressure distribution, the shape of contact and the friction force at the interface of a flat soft elastic solid moving on a rigid half-space with a slightly wavy surface. In this case an unsymmetrical contact is considered and justified with the adhesion hysteresis. For soft solids as rubber and polymers the friction originates mainly from two different contributions: the internal friction due to the viscoelastic properties of the bulk and the adhesive processes at the interface of the two solids. In the paper the authors focus on the latter contribution to friction. It is known, indeed, that for soft solids, as rubber, the adhesion hysteresis is, at least qualitatively, related to friction: the larger the adhesion hysteresis the larger the friction. Several mechanisms may govern the adhesion hysteresis, such as the interdigitation process between the polymer chains, the local small-scale viscoelasticity or the local elastic instabilities. In the paper the authors propose a model to link, from the continuum mechanics point of view, the friction to the adhesion hysteresis. A simple one-length scale roughness model is considered having a sinusoidal profile. For partial contact conditions the detached zone is taken to be a mode I propagating crack. Due to the adhesion hysteresis, the crack is affected by two different values of the strain energy release rate at the advancing and receding edges respectively. As a result, an unsymmetrical contact and a friction force arise. Additionally, the stability of the equilibrium configurations is discussed and the adherence force for jumping out of contact and the critical load for snapping into full contact are estimated.     

弹簧-金属丝网橡胶组合减振器迟滞力学模型及实验研究

金属丝网橡胶材料是一种完全由金属丝编织成的多孔复合材料,与传统螺旋卷制金属橡胶材料相比,其改进了成型工艺,剔除了制备过程中大量的手工工艺干扰,提高机械化程度,重合度更高,拥有更稳定的力学性能.由于金属丝网橡胶材料具有承载能力高、阻尼大、耐高温、耐低温、耐老化、抗油抗腐蚀等优良特性,在很多方面强于传统橡胶,多用于航空航天、船舶、军事武器等军工工业.弹簧$\!$-$\!$-$\!$金属丝网橡胶组合减振器具有可设计刚度和较高承载能力,但因其具有复杂的非线性迟滞特性,目前相关材料的本构模型还难以准确描述其力学特性.本文在弹簧$\!$-$\!$-$\!$金属丝网橡胶组合减振器静态迟滞力学性能实验的基础上,结合其干摩擦阻尼迟滞特性,提出了一种迟滞力学性能理论模型.根据减振器迟滞实验恢复力$\!$-$\!$-$\!$位移曲线特点,利用参数分离的方法将迟滞曲线分解为弹性恢复力和干摩擦阻尼力,分别建模求解等效刚度和干摩擦阻尼系数,以此建立了组合减振器理论模型,并与实验结果进行对比及进行误差分析,验证了理论模型的准确性.      

Rheological properties of poly(dimethylsiloxane) filled with fumed silica: I. Hysteresis behaviour

The apparent viscosity and primary normal stress difference were measured for dispersions of fumed silica in poly(dimethylsiloxane). Dispersions with less than 4.75% by weight of filler exhibit hysteresis in both the viscosity and normal stress, when the shear rate was increased and then decreased in discrete steps. The shape of the hysteresis loops were sensitive to the details of the deformation history. By using the appropriate deformation history, the material properties determined during the increasing shear rate part of the hysteresis experiment compare favourably with the steady-state rheological properties. The rheological properties of the dispersion were quite sensitive to the age of the fluid with no hysteresis behaviou exhibited by dispersions less than three days old. For dispersions with at least 4.75% by weight of fumed silica, neither the apparent viscosity nor the primary normal stress coefficient exhibited significant hysteresis behaviour. The relationship between the observed rheological behaviour and the dispersion's microstructure is discussed.     

MODIFICATION OF ONE-DIMENSION COUPLED HYSTERESIS MODEL FOR GMM WITH THE DOMAIN FLEXING FUNCTION

This paper focuses on eliminating the unphysical negative susceptibility which ap- pears when magnetic field is at unsaturated excitation level and reduces from extremity of the hysteresis loop in one-dimension coupled hysteresis model. The domain flexing function c （H） is used to replace the domain flexing constant c in one-dimension coupled hysteresis model. The fea- sibility and rationality of proposed modification are convinced by comparing the magnetization and magnetostriction curves with experimental data and another typical modification results. The effects of pre-stress and temperature on magnetic-elastic-thermal coupling property and hysteresis behavior are investigated.     

Landau-Ginzburg model for a deformation-driven experiment on shape memory alloys

A Landau-Ginzburg model describing first order martensitic phase transitions in shape memory alloys is considered. The model developed by Falk is transformed in order to simulate deformation-driven experiments done by I. Müller and his co-workers. In these experiments, they do not only observe load-deformation hysteresis loops but also small loops inside these hysteresis loops. Numerical simulations for a CuZnAl single crystal show good agreement with the experiment. We find, for example, nucleation processes, moving phase boundaries, rate-independent hysteresis loops and interior loops. Received January 25, 1996     

Distributed adaptive fuzzy control approach for prescribed-time containment of uncertain nonlinear multi-agent systems with unknown hysteresis

Nonlinear Dynamics - Unknown hysteresis cannot be ignored in containment control, but the problem of prescribed-time containment for uncertain nonlinear multi-agent systems with unknown hysteresis...     

Identification and nonlinearity compensation of hysteresis using NARX models

This paper deals with two problems: the identification and compensation of hysteresis nonlinearity in dynamical systems using nonlinear polynomial autoregressive models with exogenous inputs (NARX). First, based on gray-box identification techniques, some constraints on the structure and parameters of NARX models are proposed to ensure that the identified models display a key feature of hysteresis. In addition, a more general framework is developed to explain how hysteresis occurs in such models. Second, two strategies to design hysteresis compensators are presented. In one strategy, the compensation law is obtained through simple algebraic manipulations performed on the identified models. In the second strategy, the compensation law is directly identified from the data. Both numerical and experimental results are presented to illustrate the efficiency of the proposed procedures. Also, it has been found that the compensators based on gray-box models outperform the cases with models identified using black-box techniques.

     

Theory of sorption hysteresis in nanoporous solids: Part II Molecular condensation

Motivated by the puzzle of sorption hysteresis in Portland cement concrete or cement paste, we develop in Part II of this study a general theory of vapor sorption and desorption from nanoporous solids, which attributes hysteresis to hindered molecular condensation with attractive lateral interactions. The classical mean-field theory of van der Waals is applied to predict the dependence of hysteresis on temperature and pore size, using the regular solution model and gradient energy of Cahn and Hilliard. A simple “hierarchical wetting” model for thin nanopores is developed to describe the case of strong wetting by the first monolayer, followed by condensation of nanodroplets and nanobubbles in the bulk. The model predicts a larger hysteresis critical temperature and enhanced hysteresis for molecular condensation across nanopores at high vapor pressure than within monolayers at low vapor pressure. For heterogeneous pores, the theory predicts sorption/desorption sequences similar to those seen in molecular dynamics simulations, where the interfacial energy (or gradient penalty) at nanopore junctions acts as a free energy barrier for snap-through instabilities. The model helps to quantitatively understand recent experimental data for concrete or cement paste wetting and drying cycles and suggests new experiments at different temperatures and humidity sweep rates.     

Analysis of spatially extended excitable Izhikevich neuron model near instability

The dynamic response and bifurcations of high-dimensional systems endowed with hysteretic restoring forces in all degrees of freedom are investigated. Two types of hysteresis models are considered, namely the Bouc–Wen model and a differential version of the so-called exponential model of hysteresis. The numerical technique tailored for tackling high-dimensional hysteretic systems is based on an enhanced pathfollowing approach based on the Poincaré map. In particular, a five-dof mass-spring-damper-like system, with each rheological element described by the Bouc–Wen or the exponential model of hysteresis enriched by cubic and quintic nonlinear elastic terms, is investigated and a rich variety of nonlinear responses and bifurcations is found and discussed.

     

INVESTIGATION ON FATIGUE HYSTERESIS LOOPS MODELS OF FIBRE-REINFORCED CERAMIC-MATRIX COMPOSITES

纤维增强陶瓷基复合材料初始加载到疲劳峰值应力时, 基体出现裂纹, 纤维/基体界面发生脱粘. 在疲劳载荷作用下, 纤维相对基体在界面脱粘区往复滑移使得陶瓷基复合材料出现疲劳迟滞现象. 建立了纤维陶瓷基复合材料疲劳迟滞回线细观力学模型, 采用断裂力学方法确定了初始加载纤维/基体界面脱粘长度、卸载界面反向滑移长度与重新加载新界面滑移长度, 分析了4种不同界面滑移情况的疲劳迟滞回线. 假设正交铺设与编织陶瓷基复合材料疲劳迟滞回线主要受0°铺层、轴向纱线内纤维/基体界面滑移的影响, 预测了单向、正交铺设与编织陶瓷基复合材料在不同峰值应力与不同循环的疲劳迟滞回线, 与试验结果吻合.     

Hysteresis modelling and chaos prediction in one- and two-DOF hysteretic models

In the present work hysteresis is simulated by means of internal variables. The analytical models of different types of hysteresis loops allow the reproduction of major and minor loops and provide a high degree of correspondence with experimental data. In models of this type adding an external periodic excitation or increasing the number of dimensions can lead to the occurrence of chaotic behaviour. Using an effective algorithm based on numerical analysis of the wandering trajectories [1–7], the evolution of the chaotic behaviour regions of oscillators with hysteresis is presented in various parametric planes. The substantial influence of a hysteretic dissipation value on the form and location of these regions, as well as the restraining and generating effects of hysteretic dissipation on the occurrence of chaos, are ascertained. Conditions for pinched hysteresis are defined. Furthermore, autonomous coupled hysteretic oscillators under sliding friction are investigated. Conditions for the occurrence of chaotic behaviour in a two-degree-of-freedom (two-DOF) hysteretic system are found in the plane of maximal static friction forces of both oscillators versus belt velocity.     

纤维增强陶瓷基复合材料疲劳迟滞回线模型研究

纤维增强陶瓷基复合材料初始加载到疲劳峰值应力时, 基体出现裂纹, 纤维/基体界面发生脱粘. 在疲劳载荷作用下, 纤维相对基体在界面脱粘区往复滑移使得陶瓷基复合材料出现疲劳迟滞现象. 建立了纤维陶瓷基复合材料疲劳迟滞回线细观力学模型, 采用断裂力学方法确定了初始加载纤维/基体界面脱粘长度、卸载界面反向滑移长度与重新加载新界面滑移长度, 分析了4种不同界面滑移情况的疲劳迟滞回线. 假设正交铺设与编织陶瓷基复合材料疲劳迟滞回线主要受0°铺层、轴向纱线内纤维/基体界面滑移的影响, 预测了单向、正交铺设与编织陶瓷基复合材料在不同峰值应力与不同循环的疲劳迟滞回线, 与试验结果吻合.      

Non-smooth predictive control for mechanical transmission systems with backlash-like hysteresis

This paper proposes a non-smooth predictive control approach for mechanical transmission systems described by dynamic models with preceded backlash-like hysteresis. In this type of system, the work platform is driven by a DC motor through a gearbox. The work platform is represented by a linear dynamic sub-model connected in series with a backlash-like hysteresis inherent in gearbox. Here, backlash-like hysteresis is modeled as a non-smooth function with multi-valued mapping. In this case, the conventional model predictive control for such system cannot be implemented directly since the gradients of the control objective function with respect to control variables do not exist at non-smooth points. In order to solve this problem, a non-smooth receding horizon strategy is proposed. Moreover, the stability of predictive control of such non-smooth dynamic systems is analyzed. Finally, a numerical example and a simulation study on a mechanical transmission system are presented for validating the proposed method.