首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到16条相似文献,搜索用时 109 毫秒
1.
复合材料尖劈和接头端部奇性场的反平面问题研究   总被引:2,自引:0,他引:2  
提出了一个基于位移的分析尖劈端部奇性位移场和应力场反平面问题的非协调元特征法.该方法与过去原有求解裂纹尖端近似场的有限元特征法有几点不同:(1)导出虚功原理的出发点为二维扇区的散度原理;(2)有限元的单元形式为非协调元;(3)尖劈端部邻域内的位移场假定没有采用奇异变换技术.运用该方法给出了求解正交各向异性复合材料尖劈端部附近奇性应力指数、奇性位移和应力角分布函数的算例.计算结果表明,该方法较原来的有限元特征法所用的单元少而且精度高.  相似文献   

2.
各向异性两相材料尖劈奇性场的非协调元分析   总被引:3,自引:1,他引:2  
提出了一个基于位移的、分析柱状各向异性两相材料尖劈端部邻域的奇性位移场和应力场问题的非协调元特征分析法. 该方法从柱状扇区的散度定理出发,将柱状扇区控制方程的弱式化为一个与虚功原理相同形式的方程,采用一种新的非协调元技术把所导出的``虚功原理'转化为标准一阶特征方程的求解问题. 非协调元法中,尖劈端部邻域的位移场假定没有采用奇异变换技术,有限元的单元形式是一维的. 将柱状各向异性两相材料尖劈视为``广义平面应变'问题,位移场与坐标z无关,只关注界面端的幂奇异性而不考虑对数奇异性. 运用该方法给出了柱状各向异性两相材料尖劈端部奇性应力指数、奇性位移角分布和应力角分布的算例. 所有的计算结果表明,该方法使用的单元少而且精度较高.  相似文献   

3.
提出了一个基于位移的、分析平面尖劈尖端奇性应力场和位移场问题的非协调FE特征分析法.该方法与过去原有求解裂纹尖端近似场的有限元特征分析方法导出公式的出发点不同,并且采用的单元形式为非协调元,尖劈尖端邻域内的位移场假定没有采用奇异变换技术,运用该方法处理了若干尖劈和接头的算例,所有的计算结果表明,该方法较原有方法使用的单元少而且精度高,具有应用广泛性。  相似文献   

4.
利用有限元特征分析法研究了平面各向异性材料裂纹端部的奇性应力指数以及应力场和位移场的角分布函数,以此构造了一个新的裂纹尖端单元。文中利用该单元建立了研究裂纹尖端奇性场的杂交应力模型,并结合Hellinger-Reissner变分原理导出应力杂交元方程,建立了求解平面各向异性材料裂纹尖端问题的杂交元计算模型。与四节点单元相结合,由此提出了一种新的求解应力强度因子的杂交元法。最后给出了在平面应力和平面应变下求解裂纹尖端奇性场的算例。算例表明,本文所述方法不仅精度高,而且适应性强。  相似文献   

5.
文章研究多材料接头并计算其应力奇性特征.通过引入接头端部位移场的渐近级数展开式,将应力平衡方程转化为关于奇性指数的特征常微分方程组,由插值矩阵法求解获得多材料接头应力奇性指数以及相应的位移特征函数,与已有的结果对照证实了本文方法的有效性.本文计算结果还表明了多材料接头结构在不同材料粘结界面处位移场特征函数的一阶导数发生了突变,导致应力场在接头粘结界面处不连续.  相似文献   

6.
为了对平面载荷作用下压电材料中切口或接头端部附近电弹性场奇异性问题进行分析,首先以应力平衡方程、Maxwell方程和和边界条件为基础,得到一种求解压电材料特征问题的弱式方程;其次,假定楔形切口或接头端部附近单元内位移和电势沿径向分布为指数形式,而周向方向分布则采用泡函数插值,将其代入弱式方程,建立一种只需对楔形切口或接头端部附近周边进行离散的一维简单有限元方法.压电材料的极化轴可以是任意方向.利用该有限元模型讨论了楔形切口角度、极化轴方向和边界条件对奇性场的影响.通过和其它特定情况下的现有解相比,证实了该文有限元数值方法的有效性,而且精度很高.  相似文献   

7.
不同材料组成的接头结构在实际工程中是很常见的,这些应力集中较高的接头常常是工程结构断裂失效所处的最关键位置。基于正交异性多材料接头端部物理场的幂级数渐近展开假设,由弹性力学理论导出了关于正交异性多材料接头端部应力奇性指数的特征微分方程组,并将接头端部的力学交界和边界条件表达为奇性指数和特征角函数的组合,从而将正交异性多材料接头端部应力奇性指数的计算转化为相应边界条件下常微分方程组特征值的求解问题,运用插值矩阵法求解可以获得多材料接头端部若干阶应力奇性指数和相应的特征角函数。数值计算结果与现有结果对比表明了该方法的有效性和具有较高的计算精度;同时计算结果还表明多材料接头结构发生断裂失效的主要原因是位移场特征角函数的一阶导函数在不同材料粘结界面发生了突变。  相似文献   

8.
研究了各向同性与各向异性三相材料接头的应力奇性指数,通过引入奇异点附近区域位移场渐近展开的典型项,将各向同性与各向异性组合材料接头的控制方程和径向边界条件转化为变系数常微分方程的特征值问题;再利用插值矩阵法求解所建立的特征方程,得到接头端部的应力奇性指数和特征角函数。对由两个各向异性材料和一个各向同性材料以任意楔形角组成的三相接头结构的奇异性进行了研究,并比较了它们的应力奇性指数。计算结果表明:对于粘结接头,各向同性材料刚度越大应力奇异性越强;对于剥离接头,各向同性材料楔形角或材料刚度越大,第一阶应力奇异性越弱。计算结果与已有文献的结果对比吻合良好,证明了本文方法的有效性。  相似文献   

9.
对各向异性双材料自由边界面端部奇异性场问题进行了研究,利用有限元分析法所得到的各向异性双材料自由边界面端部的应力奇异性指数以及角分布函数,构造了一个自由边界面端部单元,据此建立了自由边界面端部奇异性场的杂交应力模型,并结合Hellinger-Reissner变分原理导出应力杂交元方程,建立了求解平面各向异性材料裂纹尖端问题的杂交元计算模型.与四节点单元相结合,提出一种求解自由边界面端部广义应力强度因子的杂交元法.考核例结果表明:本文方法的数值解精度高,可应用于各向异性材料双材料自由边界面端部问题.  相似文献   

10.
提出一种计算广义平面应交状态下复合材料切口应力奇性指数的新方法.在切口尖端的位移幂级数渐近展开式被引入正交各向异性材料的物理方程后,将用位移表示的应力分量代入切口端部柱状邻域的线弹性理论控制方程,切口应力奇性指数的计算被转化为常微分方程组特征值的求解.采用插值矩阵法求解该常微分方程组,可一次性地获取切口尖端多阶应力奇性指数.本法适合平面和反平面应力场耦合或解耦的情形,并可退化计算裂纹或各向同性材料切口的应力奇性指数.算例表明,所提方法对分析复合材料切口应力奇性指数是一种准确有效的手段.  相似文献   

11.
基于一种特殊有限元特征分析方法获得两相材料界面端奇异性应力和位移场数值特征解, 据此开发了一种新型超级单元模型, 用于分析热载荷作用下两相材料界面端的应力场. 与机械载荷作用下超级单元模型的区别在于, 该模型在能量泛函中考虑了热-机耦合的影响, 将应力场分为奇异项和非奇异项, 而奇异性项又可分解为热致部分和力致部分. 模型的有效性通过了经验解和传统有限元方法的验证;模型可以避免在界面端邻域网格高度加密, 提高了计算速度, 对于分析多奇异性点应力干涉问题有重要意义.  相似文献   

12.
The antiplane shear deformation of a bi-material wedge with finite radius is studied in this paper. Depending upon the boundary condition prescribed on the circular segment of the wedge, traction or displacement, two problems are analyzed. In each problem two different cases of boundary conditions on the radial edges of the composite wedge are considered. The radial boundary data are: traction–displacement and traction–traction. The solution of governing differential equations is accomplished by means of finite Mellin transforms. The closed form solutions are obtained for displacement and stress fields in the entire domain. The geometric singularities of stress fields are observed to be dependent on material property, in general. However, in the special case of equal apex angles in the traction–traction problem, this dependency ceases to exist and the geometric singularity shows dependency only upon the apex angle. A result which is in agreement with that cited in the literature for bi-material wedges with infinite radii. In part II of the paper, Antiplane shear deformation of bi-material circular media containing an interfacial edge crack is considered. As a special case of bi-material wedges studied in part I of the paper, explicit expressions are derived for the stress intensity factor at the tip of an edge crack lying at the interface of the bi-material media. It is seen that in general, the stress intensity factor is a function of material property. However, in special cases of traction–traction problem, i.e., similar materials and also equal apex angles, the stress intensity factor becomes independent of material property and the result coincides with the results in the literature.  相似文献   

13.
采用一种新型的杂交元模型和一种单胞模型来解决周期分布多边形夹杂角部的奇异性应力相互干涉的问题。新型杂交元模型是基于广义Hellinger-Reissner变分原理建立的,其中奇异性应力场分量和位移场分量是采用有限元特征分析法的数值特征解得到的。使用当前的新型杂交元模型,只需要在夹杂角部邻域的周界上划分一维单元,避免了像传统有限元模型那样需要划分高密度二维单元。文中给出了代表奇异性应力场强度的夹杂角部广义应力强度因子数值解,并考虑材料属性、夹杂尺寸和夹杂位置关系的影响。算例中,考虑了夹杂和基体完全接合的情况,并给出了考核例。结果表明:当前模型能得到高精度数值解,且收敛性好;与传统有限元法和积分方程方法相比,该模型更具有通用性,为非均质材料的细观力学分析打下了基础。  相似文献   

14.
The antiplane stress analysis of two anisotropic finite wedges with arbitrary radii and apex angles that are bonded together along a common edge is investigated. The wedge radial boundaries can be subjected to displacement-displacement boundary condi- tions, and the circular boundary of the wedge is free from any traction. The new finite complex transforms are employed to solve the problem. These finite complex transforms have complex analogies to both kinds of standard finite Mellin transforms. The traction free condition on the crack faces is expressed as a singular integral equation by using the exact analytical method. The explicit terms for the strength of singularity are extracted, showing the dependence of the order of the stress singularity on the wedge angle, material constants, and boundary conditions. A numerical method is used for solving the resul- tant singular integral equations. The displacement boundary condition may be a general term of the Taylor series expansion for the displacement prescribed on the radial edge of the wedge. Thus, the analysis of every kind of displacement boundary conditions can be obtained by the achieved results from the foregoing general displacement boundary condition. The obtained stress intensity factors (SIFs) at the crack tips are plotted and compared with those obtained by the finite element analysis (FEA).  相似文献   

15.
This paper deals with the inplane singular elastic field problems of inclusion corners in elastic media by an ad hoc hybrid-stress finite element method. A one-dimensional finite element method-based eigenanalysis is first applied to determine the order of singularity and the angular dependence of the stress and displacement field, which reflects elastic behavior around an inclusion corner. These numerical eigensolutions are subsequently used to develop a super element that simulates the elastic behavior around the inclusion corner. The super element is finally incorporated with standard four-node hybrid-stress elements to constitute an ad hoc hybrid-stress finite element method for the analysis of local singular stress fields arising from inclusion corners. The singular stress field is expressed by generalized stress intensity factors defined at the inclusion corner. The ad hoc finite element method is used to investigate the problem of a single rectangular or diamond inclusion in isotropic materials under longitudinal tension. Comparison with available numerical results shows the present method is an efficient mesh reducer and yields accurate stress distribution in the near-field region. As applications, the present ad hoc finite element method is extended to discuss the inplane singular elastic field problems of a single rectangular or diamond inclusion in anisotropic materials and of two interacting rectangular inclusions in isotropic materials. In the numerical analysis, the generalized stress intensity factors at the inclusion corner are systematically calculated for various material type, stiffness ratio, shape and spacing position of one or two inclusions in a plate subjected to tension and shear loadings.  相似文献   

16.
基于新型裂尖杂交元的压电材料断裂力学研究   总被引:3,自引:1,他引:2  
提出了一种裂尖邻域杂交元模型,将其与标准杂交应力元结合来求解压电材料裂纹尖 端的奇性电弹场和断裂参数的数值解.裂纹尖端杂交元的建立步骤为:1) 利用高次内插有限元特征法求解特征问题,得到反映裂尖奇异性电弹场状况的特 征值和特征角分布函数;2) 利用广义Hellinger-Reissner变分泛函以及特征问题的解来建立裂尖邻域杂交元模型.该 方法求解电弹场时,摒弃了传统有限元方法中裂尖奇异性场需要借助解析解的做法,也避免 了单纯有限元方法中需要在裂尖端部进行高密度单元划分.采用PZT5板中心裂纹问题 作为考核例,数值结果显示了良好的精确性.作为进一步应用,求解了含中心界面裂纹 的PZT4-PZT5两相压电材料的应力强度因子和电位移强度因子.所有的算例都考虑 了3种裂纹面电边界条件.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号