空间机械臂柔性捕获机构建模与实验研究

柔性捕获机构是空间机械臂的关键性部件, 对空间在轨服务过程中的抓捕操作起着至关重要的作用. 捕获机构的原理分析与仿真建模工作对在轨捕获工况预测分析和任务规划有着重要的应用价值. 本文以空间机械臂的末端柔性捕获机构为研究对象, 建立了柔性捕获机构软捕获过程的动力学仿真模型. 考虑了软捕获过程中柔性绳索的空间构型和大变形特性, 采用绝对节点坐标方法建立了三维空间柔性绳索单元, 并通过引入一圆柱参考坐标系来建立柔性绳索与目标适配器端刚性捕获杆的接触碰撞模型. 为满足三维运动工况验证, 搭建了纯被动边界条件的悬吊实验, 通过对比软捕获过程中被捕获目标的运动信息和受力信息, 验证了模型的准确性. 实验结果表明该模型能够有效地模拟在轨捕获任务中柔性机构软捕获阶段的动力学行为, 可以用于后续与空间机械臂联合仿真任务预测以及作为地面气浮台二维试验的必要补充. 此外, 针对在轨任务中的舱外状态巡检和漂浮目标捕获两种典型工况, 进行了机械臂捕获动力学联合仿真分析, 在给定条件下成功完成软捕获阶段的操作.      

基于Clamped B样条的空间非合作目标抓捕策略研

空间机械臂技术是未来实施在轨服务与维护任务的关键技术之一. 利用机械臂对空间非合作目标, 特别是翻滚目标的抓捕仍然存在巨大的挑战. 本文提出一种基于Clamped B样条的空间非合作目标抓捕策略方案. 在对非合作目标与空间机械臂运动学与动力学分析的基础上, 结合非合作目标被空间机械臂抓捕后的动静态对偶性分析, 构建抓捕后的力可操作度椭球作为抓捕策略设计的优化指标. 其次, 考虑目标的运动预测和空间机械臂的抓捕能力图谱构建, 确定空间机械臂应对目标的最优抓捕时机与抓捕终端状态. 基于Clamped B样条对空间机械臂各关节轨迹进行时间归一化参数描述, 并对抓捕过程中的机械臂关节角、速度、避撞、抓捕走廊等约束进行数学变换, 最终将抓捕策略转换为多约束、多目标的非线性优化问题, 利用自适应惯性权重的粒子群优化算法进行求解. 将所设计的抓捕策略应用于空间七自由度运动学冗余机械臂, 实现了对空间中翻滚目标的成功捕获, 验证了所提抓捕策略的可行性与有效性.      

Impact dynamics analysis of free-floating space manipulator capturingsatellite on orbit and robust adaptive compound controlalgorithm design for suppressing motion

The impact dynamics, impact effect, and post-impact unstable motion sup- pression of free-floating space manipulator capturing a satellite on orbit are analyzed. Firstly, the dynamics equation of free-floating space manipulator is derived using the sec- ond Lagrangian equation. Combining the momentum conservation principle, the impact dynamics and effect between the space manipulator end-effector and satellite of the cap- ture process are analyzed with the momentum impulse method. Focusing on the unstable motion of space manipulator due to the above impact effect, a robust adaptive compound control algorithm is designed to suppress the above unstable motion. There is no need to control the free-floating base position to save the jet fuel. Finally, the simulation is proposed to show the impact effect and verify the validity of the control algorithm.     

空间机械臂捕获卫星过程的碰撞动力学模拟及镇定运动的鲁棒控制

讨论了漂浮基空间机械臂捕获未知运动目标卫星的接触碰撞动力学建模和接触碰撞后系统镇定运动的控制问题。利用第二类拉格朗日方法和牛顿-欧拉法分别建立了接触碰撞前漂浮基空间机械臂和目标卫星两分体系统的动力学模型;以此为基础借助于空间机械臂与目标卫星接触点间的运动几何关系、力传递关系,计算了接触碰撞所产生的影响效应;捕获卫星后,联立空间机械臂与卫星接触碰撞前的动力学模型,建立了接触碰撞后两系统组合体动力学模型;并设计了增广鲁棒控制算法,以对受碰撞冲击后处于不稳定的组合体系统进行镇定运动控制。上述控制方法能应用于空间机械臂载体位置不受控情况,并能使组合体系统控制方程关于卫星不确定参数呈线性化关系。最后,利用数值仿真模拟捕获过程系统运动状态,验证了上述鲁棒控制镇定运动的效果。     

Motion control of the flexible manipulator via controllable local degrees of freedom

In order to improve motion accuracy of the flexible manipulator, an idea of using its topological characteristics to suppress vibration is suggested. The concept of controllable local degree of freedom is proposed and introduced to the topological structure of the flexible manipulator. It is shown that the arbitrary motion provided by the controllable local degrees of freedom plays an important role in eliminating undesired effects of the flexibility. On this basis, a method for reducing motion error of the flexible manipulator is put forward. By planning the motion of controllable local degrees of freedom, the appropriate control force can be constructed to increase the damping force and eliminate the exciting force of the flexible manipulator, thereby improving the end-effector accuracy. The results, demonstrated by the numerical simulations, are highly promising and suggest that controllable local degrees of freedom can be a useful tool in combating the undesired vibration deformation of the flexible manipulator.     

Order-N Formulation and Dynamics of Multi-Unit Flexible Space Manipulators

As robotic manipulators gain more importance in space operations, it is becoming imperative to understand their distinctive dynamics and control characteristics. With the increasing complexity of space robots, efficient algorithms are now required for their simulation. The present study uses an order-N algorithm, based on the Lagrangian approach and velocity transformations, to simulate the planar dynamics of a novel orbiting manipulator with arbitrary number of slewing and deployable flexible links. The relatively general formulation accounts for interactions between orbital, librational, slewing, deployment, and vibrational degrees of freedom, and thus is applicable to a large class of manipulator systems of contemporary interest. A parametric analysis of the system dynamics is carried out to investigate the effects of initial disturbances, variation of system parameters and maneuver profiles. The study suggests significant coupling between the rigid body motion and structural vibrations. As a result, the system's flexibility can significantly affect the manipulator's performance.     

在轨组装空间结构面向主动控制的动力学建模

在轨组装是未来超大型空间结构最有发展潜力的构建方式之一, 组装过程中空间结构尺寸逐渐增长、动力学特性也随之改变, 给结构主动控制任务带来了新的挑战. 针对这一问题, 提出一种在轨组装空间结构面向主动控制的动力学建模方法. 首先, 建立不同类别组装模块的基础模型库, 以用于后续直接调用; 然后, 定义模块的邻接关系矩阵以描述在轨组装过程中空间结构的变化, 并根据在轨组装任务特点, 设计了面向分布式控制的智能组件结构形式; 在有限元建模方法的基础上提出"节点自由度加载"方法, 利用模块的基础模型库与邻接关系矩阵, 分别建立智能组件和空间结构整体的动力学模型, 该模型可随组装的进行同步自适应更新; 最后, 以在轨组装桁架结构为例, 给出组装碰撞冲击下动力学建模与分布式主动控制数值仿真. 结果表明, 在轨组装过程中桁架结构整体的动力学特性有明显的变化, 主动控制非常必要; 基于提出的建模方法, 可高效地建立构型多样的在轨组装空间结构动力学模型; 智能组件的动力学模型在组装过程中可进一步根据邻接关系矩阵限定更新范围, 适用于在轨组装过程中的分布式主动控制系统设计.      

Solving time-varying inverse kinematics problem of wheeled mobile manipulators using Zhang neural network with exponential convergence

A mobile manipulator is a robotic device composed of a mobile platform and a stationary manipulator fixed to the platform. The forward kinematics problem for such mobile manipulators has a mathematical analytic solution; however, the inverse kinematics problem is mathematically intractable (especially for satisfying real-time requirements). To obtain the accurate solution of the time-varying inverse kinematics for mobile manipulators, a special class of recurrent neural network, named Zhang neural network (ZNN), is exploited and investigated in this article. It is theoretically proven that such a ZNN model globally and exponentially converges to the solution of the time-varying inverse kinematics for mobile manipulators. In addition, the kinematics equations of the mobile platform and the manipulator are integrated into one system, and thus the resultant solution can co-ordinate simultaneously the wheels and the manipulator to fulfill the end-effector task. For comparison purposes, a gradient neural network (GNN) is developed for solving time-varying inverse kinematics problem of wheeled mobile manipulators. Finally, we conduct extensive tracking-path simulations performed on a wheeled mobile manipulator using such a ZNN model. The results substantiate the efficacy and high accuracy of the ZNN model for solving time-varying inverse kinematics problem of mobile manipulators. Besides, by comparing the simulation results of the GNN and ZNN models, the superiority of the ZNN model is demonstrated clearly.     

大型柔性航天器动力学与振动控制研究进展

随着航天重大工程的逐步实施,航天器正朝着超高速、超大尺度、多功能的方向发展,其面临的发射和运行环境也更加恶劣.航天器发射过程中的振动及其主/被动控制、在轨运行中大型柔性航天器动力学建模与动态响应分析、结构振动与飞行器姿态的混合控制等问题越来越复杂且难于处理;航天器结构的大型化和柔性化(如大阵面天线和太阳翼等)也对其地面试验和半实物仿真提出了挑战.本文着重介绍大型柔性航天器涉及到的动力学与振动控制问题,包括航天器发射过程中的整星隔振,大型柔性结构动力学建模与振动响应分析,大型柔性航天器的结构振动与姿轨控耦合动力学及其混合控制等.提炼出航天动力学与控制领域中亟待解决的若干基础科学问题,包括:多刚柔体系统动力学建模与模型降阶(涉及大变形柔性体动力学建模、多求解器合作仿真、模型降阶、组合结构动力学建模的解析方法等);复杂结构状态空间模型构建方法与能控性(涉及状态空间模型构建的理论与实验方法、复杂结构振动控制系统的能观性与能控性等);航天器姿态运动与大型柔性结构振动的混合控制律设计(涉及姿态机动与结构振动的鲁棒混合控制、执行机构与压电控制器的协同控制等).      

软体连续机械臂动力学建模与仿真

由于软体机械臂的质量是沿臂的长度连续分布,因此采用拉格朗日方法建立软体机械臂的动力学模型时,涉及计算复杂的积分运算,采用离散化的集中质量模型降低了计算的复杂性,但准确性不足.为了提高软体机械臂动力学建模与仿真的准确度和计算效率,本文采用模态方法对软体机械臂进行运动学描述,并从能量的角度分析软体机械臂动力学特性,研究发现...     

基于自然坐标的自由浮动空间机械臂动力学分析

利用一种新方法研究自由浮动空间机械臂动力[学问题,这种方法基于一种称为“自然坐标”的新坐标体系,导出用自然坐标表示的无力矩状态下空间机械臂初积分形式动力学方程,根据臂端设计轨迹,对空间机械臂进行逆动力学仿真计算,结果表明该方法是一种简便,高效的可行方法。     

Nonlinear adaptive task space control for a 2-DOF redundantly actuated parallel manipulator

A nonlinear adaptive (NA) controller in the task space is developed for the trajectory tracking of a 2-DOF redundantly actuated parallel manipulator. The dynamic model with nonlinear friction is established in the task space for the parallel manipulator, and the linear parameterization expression of the dynamic model is formulated. Based on the dynamic model, a new control law including adaptive dynamics compensation, adaptive friction compensation and error elimination items is designed. After defining a quadratic performance index, the parameter update law is derived with the gradient descent algorithm. The stability of the parallel manipulator system is proved by the Lyapunov theorem, and the convergence of the tracking error and the error rate is proved by the Barbalat’s lemma. The NA controller is implemented in the trajectory tracking experiments of an actual 2-DOF redundantly actuated parallel manipulator, and the experiment results are compared with the APD controller.     

带有姿态的绳系航天器混沌运动实验研究

利用地面物理仿真平台研究了绳系航天器的混沌动力学行为. 首先, 根据天地动力学相似原理, 通过对卫星仿真器施加喷气力和动量轮力矩来模拟空间动力学环境, 提出了两种等效方案, 给出了它们各自适用的实验工况. 数值结果表明, 在轨绳系航天器在一定的参数条件下系绳摆动为周期或概周期运动、航天器姿态发生混沌运动. 物理仿真验证了等效方案的有效性, 揭示了绳系航天器的混沌运动特征, 表明在阻尼力矩的作用下可以避免绳系航天器混沌运动的发生.      

自由漂浮空间机器人路径优化的Legendre伪谱法

基于Legendre 伪谱法研究自由漂浮空间机器人非完整路径规划的最优控制问题. 自由漂浮是空间机器人执行任务常用的工作模式,其路径优化是空间机器人完成复杂空间任务的基础. 由于空间机器人不具有固定基座,机械臂和载体之间存在非完整约束,使得自由漂浮空间机器人路径规划完全不同于地面机器人而变得具有挑战性. 本文提出自由漂浮空间机器人路径规划的最优控制伪谱方法. 首先,利用多体动力学理论建立自由漂浮空间机器人动力学模型,给定系统的初始和目标位形,选取机械臂关节耗散能最小为性能指标,并考虑实际控制输入受限,建立其路径规划的Bolza 问题. 然后,应用Legendre 伪谱法,将状态和控制变量在Legendre-Gauss-Lobatto (LGL) 点上离散,并构造Lagrange 插值多项式逼近系统状态和控制变量,将连续路径优化问题离散化为非线性规划问题求解. 最后通过数值仿真表明,应用Legendre 伪谱法求解自由漂浮空间机器人非完整路径规划问题,得到的机械臂和载体最优运动轨迹,较好地满足各种约束条件,且计算精度高、速度快,并具有良好的实时性.      

Control and Parameter Optimization of Flexible Robots*

A hierarchical control concept for flexible robot manipulators is presented. The equations of motion are derived using the multibody system method, incorporating flexible links equipped with surface bonded actuating and sensing devices. Exploiting the structure of the dynamic model, the control concept allows combination of any joint level control for the gross motion of the manipulator with decentralized linear control of the elastic deformation of each flexible link. Therefore, the approach is capable of solving both the problem of fast and precise point-to-point motion, with acceptable vibration characteristics, and the problem of accurate trajectory tracking of the end-effector. Control parameters are found through parameter optimization. In order to verify the proposed control strategy, a SCARA robot with one flexible link is considered.     

浮动基座空间机械臂系统的动力学建模与惯性轨迹跟踪的滑模控制

本文利用多刚体系统动力学方法对载体位置、姿态均不受控制的浮动基空间机械臂系统的运动学、动力学作了分析,并结合系统的动量与动量矩守恒关系建立了系统的动力学方程及运动的广义Jacobi关系。以此为基础,对空间机械臂末端抓手追踪惯性空间期望轨迹的控制问题作了研究。考虑到空间机械臂系统的结构复杂性及某些参数（如液体控制燃料的数量）的变动性,根据具有较强鲁棒性的变结构滑模控制理论,设计了轨迹跟踪控制的变结构滑模控制方案。此控制方案的优点在于：在操作过程中不需要对空间机械臂载体的位置、姿态进行主动控制,因此将大大减少位置、姿态控制装置的燃料消耗。通过对平面三杆自由浮动空间机械臂系统的仿真计算,证实了文中提出的变结构滑模控制方案的有效性。     

Dynamic modeling and wind vibration control of the feed support system in FAST

The Feed Support System (FSS) addressed here is the receiver carrier of the Five-hundred-meter Aperture Spherical radio Telescope (FAST) in China. The FSS is a complex hybrid manipulator, which consists of a cable-driven Stewart manipulator, an A–B rotator and a rigid Stewart manipulator. The cable-driven Stewart manipulator, which is a long-span flexible cable structure, is sensitive to the wind disturbance and induces the FSS vibration. The rigid Stewart manipulator is designed to suppress the vibration and improve the terminal accuracy of the FSS. In the paper, the elastic dynamic model of the cable-driven Stewart manipulator is deduced by simplifying the flexible cable as the spring damping model, while the rigid-body dynamic model of the A–B rotator and the rigid Stewart manipulator is obtained in detail, using the Newton–Euler method. The internal coupling forces of the FSS are figured out. The wind disturbance model is established according to the Davenport spectrum. By adopting the kinematic and dynamic parameters of the FAST prototype, the simulation model of the FSS is completed. Kinematic and dynamic vibration control strategies are evaluated with simulations. Results show that the dynamic vibration suppression strategy well satisfies the FSS terminal accuracy requirement, keeps the rigid Stewart manipulator working with reasonable driving forces, and should be adopted in the control system of the FAST prototype.     

BUFFER AND COMPLIANT DYNAMIC SURFACE CONTROL OF SPACE ROBOT CAPTURING SATELLITE BASED ON COMPLIANT MECHANISM$^{\bf 1)}$

研究了空间机器人在轨捕获非合作卫星过程避免关节受碰撞冲击破坏的缓冲从顺控制问题, 为此在机械臂与关节电机之间配置了一种柔性机构, 其作用在于: (1)在接触、碰撞阶段可通过其内置弹簧的变形来吸收被捕获卫星对空间机器人关节产生的冲击力矩; (2)在镇定运动阶段, 结合与之配合的缓冲从顺控制策略来适时开、关关节电机, 以保证关节受到的冲击力矩受限在安全范围. 首先, 利用多刚体系统理论获得配置柔性机构空间机器人及目标卫星分体系统动力学方程; 之后, 结合整个系统动量守恒关系, 捕获操作后系统运动几何关系及力的传递规律, 建立了两者形成联合体系统的动力学方程, 并计算了碰撞过程的冲击效应与冲击力. 为了实现失稳联合体系统的镇定控制, 提出了一种基于动态面的缓冲从顺控制方案. 上述控制方案可在实现吸收捕获操作产生的冲击力矩的同时, 还能在冲击力矩过大时适时开启、关闭关节电机, 以避免关节电机发生破坏; 此外, 动态面的引入避免了反演法存在的计算膨胀问题, 有效减少了计算量. 基于Lyapunov函数法证明了系统的稳定性, 并通过系统数值仿真结果验证了上述缓冲从顺控制策略的正确性.     

基于柔性机构捕捉卫星的空间机器人动态缓冲从顺控制

研究了空间机器人在轨捕获非合作卫星过程避免关节受碰撞冲击破坏的缓冲从顺控制问题, 为此在机械臂与关节电机之间配置了一种柔性机构, 其作用在于: (1)在接触、碰撞阶段可通过其内置弹簧的变形来吸收被捕获卫星对空间机器人关节产生的冲击力矩; (2)在镇定运动阶段, 结合与之配合的缓冲从顺控制策略来适时开、关关节电机, 以保证关节受到的冲击力矩受限在安全范围. 首先, 利用多刚体系统理论获得配置柔性机构空间机器人及目标卫星分体系统动力学方程; 之后, 结合整个系统动量守恒关系, 捕获操作后系统运动几何关系及力的传递规律, 建立了两者形成联合体系统的动力学方程, 并计算了碰撞过程的冲击效应与冲击力. 为了实现失稳联合体系统的镇定控制, 提出了一种基于动态面的缓冲从顺控制方案. 上述控制方案可在实现吸收捕获操作产生的冲击力矩的同时, 还能在冲击力矩过大时适时开启、关闭关节电机, 以避免关节电机发生破坏; 此外, 动态面的引入避免了反演法存在的计算膨胀问题, 有效减少了计算量. 基于Lyapunov函数法证明了系统的稳定性, 并通过系统数值仿真结果验证了上述缓冲从顺控制策略的正确性.