首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到18条相似文献,搜索用时 109 毫秒
1.
通过炸药单轴压缩实验,利用高速摄影和高速红外热像仪,对2种典型PBX炸药变形损伤过程和温升效应进行了实时观测。实验结果表明,2种典型PBX炸药的损伤以及温升效应表现出明显差别:低粘结剂含量的炸药表现出明显的脆性特征,材料应力应变曲线中的应变软化阶段是伴随着材料损伤的演化过程,最终的失稳破坏导致样品中贯穿裂纹的形成,非均匀的裂纹分布对应于局部高温带的出现; 高粘结剂含量的炸药表现出明显的韧性特征,材料应力应变曲线未出现应变软化现象,变形损伤分布较均匀,但剪切方向出现网络状的温升分布。  相似文献   

2.
通过对汽车用挡风玻璃进行不同温度、不同应力水平下的单轴拉伸蠕变实验,揭示了其非线性蠕变变形特性.实验发现,不同温度和载荷下的蠕变曲线形状类似,高温(550℃~590℃)下该材料的减速蠕变变形不很明显,主要表现为稳态和加速蠕变变形,且其断裂数据符合Monkman-Grant关系,应力和温度对其影响不显著.基于实验结果,本文建立了非线性高温蠕变本构方程.理论预测与实验数据进行了比较,结果表明所提出的本构方程能较好地描述汽车玻璃高温蠕变变形的全过程.  相似文献   

3.
SUS304材料的小冲孔蠕变试验研究   总被引:5,自引:0,他引:5  
陈玉新  凌祥  涂善东 《实验力学》2005,20(2):219-225
小冲孔蠕变试验技术是一种采用微小试样、近乎无损地评定材料高温力学性能的新方法,本文应用小冲孔蠕变试验技术评定SUS304材料的高温力学性能。在不同温度下,对SUS304奥氏体不锈钢进行载荷范围为443N~513N的小冲孔蠕变试验,得到材料在不同试验条件下的蠕变曲线,通过中断试样的扫描电镜观察分析了试样的变形过程,讨论了影响小冲孔蠕变试验的主要因素。试验结果表明,从小冲孔实验获得的蠕变曲线与传统单轴拉伸蠕变实验的蠕变曲线具有一致性,都具有三个明显的蠕变阶段,利用小冲孔蠕变试验技术测试材料的高温性能是可行的。试验载荷越大,试样瞬时变形挠度越大,蠕变第二阶段速率越快,断裂时间越短。载荷、温度、试样厚度、环境是小冲孔试验的主要影响因素,对试验结果影响很大。  相似文献   

4.
PBX炸药本构关系的实验研究   总被引:4,自引:0,他引:4  
在SHPB装置上开展了某典型PBX炸药的单轴压缩、间接拉伸实验。利用入射波整形技术,结合 半导体应变片和石英晶体联合测试的方法,实现了PBX炸药的应力平衡和恒应变率加载,得到了不同应变率 下某PBX炸药的压缩应力应变曲线,初步建立了该炸药的修正Sargin唯象模型;开展了3种PBX炸药的动 态巴西实验,通过高速摄影获得了炸药的破坏过程,结合数字相关技术,获得了试样裂纹附近的应变场分布, 初步建立了描述3种炸药动态拉伸行为的修正Johnson-Cook模型。模型曲线与实验结果符合较好。  相似文献   

5.
在圆盘试验的力学模型基础上 ,测定了JB90 14等七种TATB基PBX的间接拉伸性能 ,为进一步完善该方法做了初步研究。结果显示 :所有PBX均产生中心开裂现象 ,与该模型预测一致 ;同时该测试方法能有效地反映出JB90 14及其经不同改性后得到的三种PBX的整体力学性能变化趋势。这说明圆盘试验方法适用于PBX。通过比较这七种PBX拉伸性能 ,认为JB90 14及其改性的JB90 14 G1应值得注意。  相似文献   

6.
夏开文  余裕超  王帅  吴帮标  徐颖  蔡英鹏 《爆炸与冲击》2021,41(4):041403-1-041403-12
巴西圆盘实验是国际岩石力学与工程学会(ISRM)推荐的测量岩石静态拉伸强度的方法之一,也是该学会推荐的唯一测量岩石动态拉伸强度的方法。但是巴西圆盘实验得到的静态或者动态拉伸强度往往较真实值偏大,其中一个原因是所谓的过载现象,而且其相应的过载效应在动态巴西圆盘测试中尤为明显。为探究岩石材料动态劈裂拉伸强度的过载效应机理及其率相关性,利用SHPB实验装置开展了不同加载率条件下的动态巴西圆盘实验,对岩石材料劈裂拉伸强度的过载特性进行了定量分析;结合颗粒流程序进行了相关实验的数值模拟,得到了圆盘破裂的微观过程。结果表明:(1)动态巴西圆盘实验得到的岩石拉伸强度存在明显的过载现象,圆盘试样拉伸强度的过载比随加载率增加呈对数形式增加;(2)依据动态拉伸强度实验结果对模型参数引入率相关性后,模拟观察到的过载效应更加贴近实验观测。这些结果表明巴西圆盘实验中拉伸强度的过载现象是客观存在的,其机理与试样的圆盘构型以及测试方法有关。结合实验和数值结果,解释了巴西圆盘实验的过载机理,证明了动态巴西圆盘实验修正的必要性并给出了相应的方案,以获取岩石材料的真实动态拉伸强度。  相似文献   

7.
为合理描述人工冻结法施工的矿井土层力学特性,对某矿井土样的重塑土进行单轴抗压强度实验和单轴压缩蠕变实验,得到重塑冻结黏土在不同温度及载荷加载等级下的应力-应变曲线和蠕变曲线。实验结果表明:冻结温度越低,土样的单轴强度越大;相同冻结温度下,土样的蠕变变形随着应力水平的升高而增大。单轴压缩蠕变的等时应力-应变曲线随时间发展向应变轴靠拢;土样经历初始蠕变和等速蠕变两个阶段,在较高应力水平下有进入加速蠕变的趋势;对S--M模型中各参数的意义进行修正并考虑温度的影响,得到人工冻结黏土改进S--M蠕变显式模型,然后采用粒子群算法对人工冻结黏土S--M蠕变模型参数进行优化。改进S--M蠕变显式模型理论计算值与实验值吻合良好,表明改进S--M蠕变显式模型能较好模拟人工冻结黏土的蠕变特性。改进S--M蠕变显式模型为人工冻土蠕变计算提供一种新方法。  相似文献   

8.
为合理描述人工冻结法施工的矿井土层力学特性,对某矿井土样的重塑土进行单轴抗压强度实验和单轴压缩蠕变实验,得到重塑冻结黏土在不同温度及载荷加载等级下的应力-应变曲线和蠕变曲线。实验结果表明:冻结温度越低,土样的单轴强度越大;相同冻结温度下,土样的蠕变变形随着应力水平的升高而增大。单轴压缩蠕变的等时应力-应变曲线随时间发展向应变轴靠拢;土样经历初始蠕变和等速蠕变两个阶段,在较高应力水平下有进入加速蠕变的趋势;对S-M模型中各参数的意义进行修正并考虑温度的影响,得到人工冻结黏土改进S-M蠕变显式模型,然后采用粒子群算法对人工冻结黏土S-M蠕变模型参数进行优化。改进S-M蠕变显式模型理论计算值与实验值吻合良好,表明改进S-M蠕变显式模型能较好模拟人工冻结黏土的蠕变特性。改进S-M蠕变显式模型为人工冻土蠕变计算提供一种新方法。  相似文献   

9.
大理岩的高应变率动态劈裂实验   总被引:6,自引:0,他引:6  
首次把平台巴西圆盘试样引入动态劈裂试验。利用直径100mm的分离式Hopkinson杆对大理岩巴西圆盘和平台巴西圆盘试样进行了动态劈裂实验。结合有限元分析,得到了大理岩的动态劈裂破坏的拉伸强度。分析了巴西圆盘和平台巴西圆盘的典型破坏方式。结果表明,大理岩的动态拉伸强度随着应变率的提高而增加。利用圆盘中心粘贴的应变片来测大理岩等脆性材料的动态拉伸强度,是一种简便高效的试验方法。和巴西圆盘相比,平台巴西圆盘具有更大的优越性和更好的测量效果。  相似文献   

10.
论文研发了不锈钢短纤维(SSFs)填充聚丙烯(PP)的新型高聚物复合材料,开展了在不同的蠕变荷载下材料的蠕变行为研究.实验证实,在相同的持载时间条件下,蠕变变形与蠕变载荷之间呈非线性关系,这个现象用传统的线性粘弹性理论难以解释.论文采用延迟时间与蠕变荷载相关的观点,对蠕变变形-蠕变载荷的非线性现象进行分析,发现了在对数坐标下延迟时间与蠕变载荷之间存在线性关系,从而得到了延迟时间与蠕变载荷之间的幂律关系.进一步的分析指出,蠕变载荷提升导致延迟时间增加的机理主要由材料体系的损伤所诱发.  相似文献   

11.
Summary Transient creep recovery tests in simple tension were performed in a series of cross-linked high polymers in pure and plasticized states. A loading cycle was adopted according to which each specimen was loaded in creep for a time period of 16 followed by recovery for the same time period. This loading cycle was repeated for various steps of temperature from ambient temperature up to a temperature corresponding to the rubbery region of each polymer. It was shown that, while the 15 measurements of deformation after loading or unloading were approximately equal, recovery individual curves were always lagging in time the corresponding creep curves. Composite curves of creep or recovery deformation in semi-log time scale reduced to a temperature of 30 °C were plotted by applying the method of reduced variables. The creepdeformation composite curve was always advancing in time relatively to the respective recovery composite curve. This phenomenon was an accumulation of the partial difference of the corresponding individual curves.Time-shift factor versus temperature curves for creep and recovery were plotted and compared.It was established that the remaining deformation after 16 minutes of a 16 creep recovery normalized to the initial deformation at the beginning of recovery, if plotted versus temperature, presented the same shape of curves for all types of materials tested. The maxima of these curves were diminishing with addition of plasticizer according to a straight line.  相似文献   

12.
We present a model in this paper for predicting the inverse Hall–Petch phenomenon in nanocrystalline (NC) materials which are assumed to consist of two phases: grain phase of spherical or spheroidal shapes and grain boundary phase. The deformation of the grain phase has an elasto-viscoplastic behavior, which includes dislocation glide mechanism, Coble creep and Nabarro–Herring creep. However the deformation of grain boundary phase is assumed to be the mechanism of grain boundary diffusion. A Hill self-consistent method is used to describe the behavior of nanocrystalline pure copper subjected to uniaxial tension. Finally, the effects of grain size and its distribution, grain shape and strain rate on the yield strength and stress–strain curve of the pure copper are investigated. The obtained results are compared with relevant experimental data in the literature.  相似文献   

13.
为了了解深部软岩在冻结条件下的单轴力学性能,以东北地区的原状泥砂岩为试验对象,利用自行研制的WDT-100型人工冻土试验仪器,对其进行不同温度下的人工冻土单轴抗压强度试验和单轴蠕变试验,得到泥砂岩单轴压缩应力-应变关系曲线,各温度下试样的单轴抗压强度以及蠕变曲线.单轴压缩试验结果表明:试样在给定温度和加载速率条件下,单轴压缩应力-应变关系曲线都有较为明显的屈服点,并且都在屈服点后,强度有所提高,出现硬化现象.单轴蠕变试验结果表明:单轴压缩蠕变曲线有非线性特征,单轴压缩蠕变的等时应力-应变曲线向应变轴靠拢;单轴压缩时蠕变模量随时间的增长而降低.最后采用遗传算法优化模型参数,得出泥砂岩蠕变经验方程.与试验结果对比,发现拟合情况较好.  相似文献   

14.
The nonlinear strain rate sensitivity, multiple creep and recovery behavior of polyphenylene oxide (PPO), which were explored through strain rate-controlled experiments at ambient temperature by Khan [The deformation behavior of solid polymers and modeling with the viscoplasticity theory based overstress, Ph.D. Thesis, Rensselaer Polytechnic Institute, New York], are modeled using the modified viscoplasticity theory based on overstress (VBO). In addition, VBO used by Krempl and Ho [An overstress model for solid polymer deformation behavior applied to Nylon 66, ASTM STP 1357, 2000, p. 118] and the classical VBO are used to demonstrate the improved modeling capabilities of VBO for solid polymer deformation. The unified model (VBO) has two tensor valued state variables, the equilibrium and kinematic stresses and two scalar valued states variables, drag and isotropic stresses. The simulations include monotonic loading and unloading at various strain rates, multiple creep and recovery at zero stress. Since creep behavior has been found to be profoundly influenced by the level of the stress, the tests are performed at different stresses above and below the yield point. Numerical results are compared to experimental data. It is shown that nonlinear rate sensitivity, nonlinear unloading, creep and recovery at zero stress can be reproduced using the modified viscoplasticity theory based on overstress.  相似文献   

15.
大坝坝基的长期稳定性是大坝运营安全的重要保障, 而坝基岩体中的软弱夹层是影响其变形和稳定的重要因素. 为研究大岗山水电站坝基中辉绿岩脉软弱夹层在长期载荷作用下的变形机制, 在坝基边坡的试验平硐内垂直于软弱夹层进行了现场大型圆形刚性承压板压缩蠕变试验. 辨识得到可较准确表示其蠕变特性的5参量广义Kelvin模型, 克服了3 参量广义Kelvin模型收敛过快的缺陷. 基于弹性力学中的布辛涅斯克问题, 通过黏弹性理论中的拉普拉斯变换及逆变换, 推导出了刚性承压板下部岩体的5参量广义Kelvin模型表示的黏弹性变形公式, 并以此为基础反演得到流变参数.  相似文献   

16.
Different phenomenological equations based on plasticity, primary creep (as a viscoplastic mechanism), secondary creep (as another viscoplastic mechanism) and different combinations of these equations are presented and used to describe the material inelastic deformation in uniaxial test. Agreement of the models with experimental results and with the theoretical concepts and physical realities is the criterion of choosing the most appropriate formulation for uniaxial test. A model is thus proposed in which plastic deformation, primary creep and secondary creep contribute to the inelastic deformation. However, it is believed that the hardening parameter is composed of plastic and primary creep parts. Accordingly, the axial plastic strain in a uniaxial test may no longer be considered as the hardening parameter. Therefore, a proportionality concept is proposed to calculate the plastic contribution of deformation.  相似文献   

17.
The main goal of the paper is to compare predictive power of relaxation spectra found by different methods of calculations. The experimental data were obtained for a new family of propylene random copolymers with 1-pentene as a comonomer. The results of measurements include flow curves, viscoelastic properties, creep curves and rubbery elasticity of copolymer melts. Different relaxation spectra were calculated using independent methods based on different ideas. It lead to various distributions of relaxation times and their “weights”. However, all of them correctly describe the frequency dependencies of dynamic modulus. Besides, calculated spectra were used for finding integral characteristics of viscoelastic behaviour of a material (Newtonian viscosity, the normal stress coefficient, steady-state compliance). In this sense all approaches are equivalent, though it appears impossible to estimate instantaneous modulus. The most crucial arguments in estimating the results of different approaches is calculating the other viscoelastic function and predicting behaviour of a material in various deformation modes. It is the relaxation and creep functions. The results of relaxation curve calculations show that all methods used give rather similar results in the central part of the curves, but the relaxation curves begin to diverge when approaching the high-time (low-frequency) boundary of the relaxation curves. The distributions of retardation times calculated through different approaches also appear very different. Meanwhile, predictions of the creep curves based on these different retardation spectra are rather close to each other and coincide with the experimental points in the wide time range. Relatively slight divergences are observed close to the upper boundary of the experimental window. All these results support the conclusion about a rather free choice of the relaxation time spectrum in fitting experimental data and predicting viscoelastic behaviour of a material in different deformation modes. Received: 15 March 2000 Accepted: 18 September 2000  相似文献   

18.
为了克服传统元件组合模型不能描述岩石蠕变过程中非线性特征的缺陷,首先根据加速蠕变阶段的应变和应变率随蠕变时间急剧增大的特点,建立黏塑性应变与蠕变时间的指数函数关系并提出非线性黏塑性体.将该非线性黏塑性体与广义Burgers蠕变模型串联,建立可以描述岩石全蠕变过程的非线性黏弹塑性蠕变模型,根据叠加原理得到一维应力状态下的轴向蠕变方程.然后基于塑性力学理论指出岩石三维蠕变本构方程建立过程中的不足之处,并给出非线性黏弹塑性蠕变模型合理的三维蠕变方程.最后采用不同应力水平下砂岩轴向蠕变试验对模型合理性进行验证,结果表明:拟合曲线与试验曲线吻合度较高,所建蠕变模型能够很好地描述砂岩在不同应力水平下的蠕变变形规律,尤其对加速蠕变阶段的非线性特征描述效果很好,验证了模型的合理性.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号