基于参数曲面描述的层合壳体结构分析的分片Ritz法

为了对层合壳体结构进行准确和有效的分析，给出了基于分片参数曲面描述的适用于层合壳体结构分析的分片Ritz法。该方法首先将壳体结构的参考曲面进行分片处理，利用参数曲面来描述分片的壳体参考曲面并将分片按照C^0连续性进行拼接。构造壳体参考曲面分片上的具有参数曲面特征的Ritz法的试解函数，并得到相应问题的泛函和控制方程。最后给出了两个典型的层合壳体结构的数值算例，结果表明该方法准确有效。     

单层偏心圆柱薄壳的自由振动特性分析研究

本文从偏心圆柱壳截面的几何特性出发,将偏心圆柱壳问题转化为一个周向变厚度圆柱壳问题,随后利用其状态向量之间的传递矩阵将壳体的振动控制方程转化为矩阵微分方程形式,通过Magnus级数法求解传递矩阵得到频率方程。采用Lagrange插值法得到偏心圆柱壳体自由振动状态下的固有频率,并且与圆柱壳的固有频率进行了比较。对影响结构固有频率的主要参数进行了分析,得到了这些参数和固有频率之间的关系。本文不仅提出了一种有效求解偏心圆柱壳固有频率的新方法,同时亦可为检测偏心圆柱壳的偏心距提供一种新的思路和方法。     

一类生物流体力学模型的稳定性

在研究颅内压集中参数模型的基础上，改进自适应的龙格-库塔法对一类生物流体力学模型进行数值模拟。通过合理控制计算量，得到了微分方程近似解的局部截断误差的估计。使用矩阵特征值分析微分方程的稳定性，在实际生理范围内变化模型参数，得到特征值随参数变化的关系，指出模型中存在实部为正的特征值。文章还讨论了控制矩阵特征值的变化对数值方法稳定步长的影响，并得到步长的取值范围。通过理论分析。得到控制方程的解随时间的发展和模型中生理参数的选取相关。分析了特征值变化的稳定性和参数的关系，并对模型进行改进，讨论其稳定性的情况。     

正弦波纹扁球壳的非线性强迫振动

波纹壳是传感器弹性元件的一类重要形式,也是精密仪器仪表弹性元件中的一类重要形式。由于波纹壳形状复杂、参数众多、厚度薄,对其进行非线性分析非常重要同时也是十分困难的。本文考虑一种在传感器弹性元件中有重要应用价值的正弦波纹浅球壳体,将这种壳体视为结构上的圆柱正交异性扁球壳,根据Andryewa的思想,分别得到了正弦波纹壳径向、环向在拉伸、弯曲下的等价的四个各向异性参数;建立了正弦波纹扁球壳的非线性强迫振动微分方程;得到了正弦波纹扁球壳非线性强迫振动的共振周期解及幅频特性曲线。     

基于传递函数法的带多个外挂机翼颤振分析

基于带外挂机翼结构和气动特点，使用带有半解析半数值特性的传递函数方法进行处理．首先，通过机翼的运动微分方程、二元机翼非定常气动力Therdorson 模型、结合外挂挂载处的内力平衡与位移状态条件，得到了三维的带多个外挂大展弦比机翼的颤振微分方程．进而，使用传递函数方法，先将颤振计算方程整理成为状态空间方程形式，结合求解复特征值的方法，完成了带多个外挂大展弦比机翼的动气动弹性稳定性分析．对比已有文献的计算结果以及通过有限元方法进行的仿真结果，证实了文章所提计算方法的准确性和高效性，结合传递函数方法的优势，进一步将文章方法拓展到机翼的固有频率和发散速度求解．文章结尾，分析了外挂数量、外挂质量、转动惯量及位置分布等变量对带多个外挂大展弦比机翼的动气动弹性稳定性的影响．     

一类特殊四阶波动方程的分析解

本文采用合理的小参数利用摄动法，将４阶偏微分方程降阶，变成了可利用现有数学物理方法求解的２阶偏微分方程，得到了一类特殊波动方程的分析解．     

轴对称弹性圆锥扁壳非线性自由振动直接摄动解法

本文采用弹性圆锥扁壳中心无量纲振幅和壳体母线的倾角为参数，将挠度、应力函数的导数以及自由振动频率展开为双参量的幂级数形式，用直接摄动法获得各级递推线性偏微分方程，应用变分法求得各级递推方程的近似解答，从而给出弹性圆锥扁壳非线性自由振动频率的基本公式。     

轴向运动弦线横向振动的频域分析

轴向运动弦线是多种工程系统的模型。为明确轴向运动横向振动的频域特性，及探索频域方法的应用特点．本文用频域方法分析轴向运动弦线的横向振动。基于轴向运动弦线横向振动方程和边界条件．通过Laplace变换导出频率域中的控制方程，并将该控制方程和边界条件用状态变量表示。由状态空间中的控制方程导出特征方程，从而求出固有频率。由轴向运动弦线的矩阵函数计算得到系统的传递函数，然后用留数定理计算传递函数的Laplace逆变换．这样就可以得到时域响应。最后分析了轴向运动弦线的横向共振，若简谐外激励的频率与系统固有频率相同，系统响应将随时间无限增加。     

用优化方法确定桩基的荷载传递函数

传递函数法计算单桩沉降及轴力的关键在于确定桩身和桩端的传递函数本文提出了根据室内砼和岩土试验所得到的荷载传递函数的数学表达式，结合桩基静载荷试桩资料用改进的Ｐｏｗｅｌ法确定数学模型中的待定参数来获得桩基的荷载传递函数     

旋转壳的数值传递函数方法

应用数值传递函数方法建立一种用于分析旋转壳静力、动力响应的截锥壳单元,在本方法中,单元的位移在环向展开为Fourier级数的形式,应用薄壳理论可以得到解耦的微分方程,通过Laplace变换可以将方程转化为频域内的常微分方程,将其表示为状态空间形式后,可以应用数值传递函数方法求解,对复杂的系统可以应用与有限元类似的方法,划分多个单元组合求解,文中给出了几种旋转壳的动力、静力问题的数值算例,并与其它方法进行了比较,表明本文方法具有精度高,计算方便等特点。     

The displacement solution of conical shell and its application

In this paper,the displacement solution method of the conical shell is presented.Fromthe differential equations in displacement form of conical shell and by introducing adisplacement function,U(s,θ),the differential equations are changed into an eight-ordersoluble partial differential equation about the displacement function U(s,θ)in which thecoefficients are variable.At the same time,the expressions of the displacement and internalforce components of the shell are also given by the displacement function.As special casesof this paper,the displacement function introduced by V.Z.Vlasov in circular cylindricalshell,the basic equation of the cylindrical shell and that of the circular plate are directlyderived.Under the arbitrary loads and boundary conditions,the general bending problem of theconical shell is reduced to finding the displacement function U(s,θ),and the generalsolution of the governing equation is obtained in generalized hypergeometric function,Forthe axisymmetric bending deformation of the     

Structural and acoustic response of a finite stiffened conical shell

In this paper, a precise transfer matrix method is presented to calculate the structural and acoustic responses of the conical shell. The governing equations of conical shells are written as a coupled set of first order differential equations. The field transfer matrix of the shell and non-homogenous term resulting from the external excitation are obtained by precise integration method. After assembling the field transfer matrixes, the whole matrix describing dynamic behavior of the stiffened conical shell is obtained. Then the structural and acoustic responses of the shell are solved by obtaining unknown sound pressure coefficients. The natural frequencies of the shell are compared with the FEM results to test the validity. Furthermore, the effects of the semi-vertex angle, driving force directions and boundary conditions on the structural and acoustic responses are studied.     

The exact solution for the general bending problems of conical shells on the elastic foundation

The general bending problem of conical shells on the elastic foundation (Winkler Medium) is not solved. In this paper, the displacement solution method for this problem is presented. From the governing differential equations in displacement form of conical shell and by introducing a displacement function U(s,θ), the differential equations are changed into an eight-order soluble partial differential equation about the displacement function U(s,θ) in which the coefficients are variable. At the same time, the expressions of the displacement and internal force components of the shell are also given by the displacement function U(s θ). As special cases of this paper, the displacement function introduced by V.S. Vlasov in circular cylindrical shell^[5], the basic equation of the cylindrical shell on the elastic foundation and that of the circular plates on the elastic foundation are directly derived.Under the arbitrary loads and boundary conditions, the general bending problem of the conical shell on the elastic foundation is reduced to find the displacement function U(s,θ).The general solution of the eight-order differential equation is obtained in series form. For the symmetric bending deformation of the conical shell on the elastic foundation, which has been widely usedinpractice,the detailed numerical results and boundary influence coefficients for edge loads have been obtained. These results have important meaning in analysis of conical shell combination construction on the elastic foundation,and provide a valuable judgement for the numerical solution accuracy of some of the same type of the existing problem.     

Non-linear dynamic analysis of symmetric and antisymmetric cross-ply laminated orthotropic thin shells

In this paper, the governing equations for non-linear free vibration of truncated, thin, laminated, orthotropic conical shells using the theory of large deformations with the Karman-Donnell-type of kinematic nonlinearity are derived. Applying superposition principle and Galerkin’s method, these equations are reduced to a time dependent non-linear differential equation. The frequency-amplitude relationship for the laminated orthotropic thin truncated conical shell is obtained using the method of weighted residuals. In the particular case, we can obtain the similar relationships for the single-layer and laminated orthotropic cylindrical shells, also. The influence played by geometrical parameters of the conical shell and physical parameters of the laminate (i.e. material properties, staking sequences and number of layers) on the non-linear vibration behavior of the conical shell is examined. It is noticed that the non-linear vibration of shells is highly dependent on laminate characteristics and, from these observations, it is concluded that specific configurations of laminates should be designed for each kind of application. Present results are compared with available data for special cases.     

Three-dimensional free vibration analysis of rotating laminated conical shells: layerwise differential quadrature (LW-DQ) method

This paper focuses on the free vibration analysis of thick, rotating laminated composite conical shells with different boundary conditions based on the three-dimensional theory, using the layerwise differential quadrature method (LW-DQM). The equations of motion are derived applying the Hamilton’s principle. In order to accurately account for the thickness effects, the layerwise theory is used to discretize the equations of motion and the related boundary conditions through the thickness of the shells. Then, the equations of motion as well as the boundary condition equations are transformed into a set of algebraic equation applying the DQM in the meridional direction. This study demonstrates the applicability, accuracy, stability and the fast rate of convergence of the present method, for free vibration analyses of rotating thick laminated conical shells. The presented results are compared with those of other shell theories obtained using conventional methods and a special case where the angle of the conical shell approaches zero, that is, a cylindrical shell and excellent agreements are achieved.     

锥壳固有振动的精确解

本文从锥壳的Mushtari-Donnell型位移微分方程组出发,通过引入一个位移函数U(s,θ,τ)(在极限情况下,它将退化成对于圆柱壳引入的位移函数),将基本微分方程组化成为一个可解偏微分方程。这个方程的解用级数形式给出。     

功能梯度截顶圆锥壳的热弹性弯曲精确解

研究了功能梯度材料截顶圆锥壳在横向机械载荷与非均匀热载荷同时作用下的变形问题. 基于经典线性壳体理论推导出了以横向剪力和中面转角为基本未知量的功能梯度薄圆锥壳轴对称变形的混合型控制方程. 假设功能梯度圆锥壳的材料性质为沿厚度方向按照幂函数连续变化的形式. 然后采用解析方法求解,得到了问题的精确解. 分别就两端简支和两端固支边界条件,给出了圆锥壳的变形随其载荷、材料参数等变化的特征关系曲线,重点分析和讨论了载荷参数与材料梯度变化参数对变形的影响.      

Nonlinear natural frequency of shallow conical shells with variable thickness

IntroductionTheplatesandtheshellswithvariablethicknessarewidelyusedinengineering .Theproblemaboutstaticshasbeenstudiedbymanyscholars;therearemanyRefs .[1 -4 ]inthisfield .Papersaboutnonlineardynamicsaremuchless[5 ,6 ].Inthispaper,selectingthemaximumamplitudeinthecenterofshallowconicalshellswithvariablethicknessasperturbationparameter,thenonlinearnaturalfrequencyofshallowconicalshellswithvariablethicknessisobtainedbymethodgiveninRef.[7] .Thenonlinearnaturalfrequencyisnotonlyconnectedwiththeva…     

Free vibration and critical speed of moderately thick rotating laminated composite conical shell using generalized differential quadrature method

The generalized differential quadrature method (GDQM) is employed to consider the free vibration and critical speed of moderately thick rotating laminated composite conical shells with different boundary conditions developed from the first-order shear deformation theory (FSDT). The equations of motion are obtained applying Hamilton’s concept, which contain the influence of the centrifugal force, the Coriolis acceleration, and the preliminary hoop stress. In addition, the axial load is applied to the conical shell as a ratio of the global critical buckling load. The governing partial differential equations are given in the expressions of five components of displacement related to the points lying on the reference surface of the shell. Afterward, the governing differential equations are converted into a group of algebraic equations by using the GDQM. The outcomes are achieved considering the effects of stacking sequences, thickness of the shell, rotating velocities, half-vertex cone angle, and boundary conditions. Furthermore, the outcomes indicate that the rate of the convergence of frequencies is swift, and the numerical technique is superior stable. Three comparisons between the selected outcomes and those of other research are accomplished, and excellent agreement is achieved.