激光、激光技术 激光器件 气体激光器

TN248.2 2006031999一种新型TEA CO2激光器的实验研究=Experi mental re-search on a novel TEA CO2laser[刊,中]/张莉莉(哈尔滨工业大学光电子研究所.黑龙江,哈尔滨(150001)) ,任德明…∥光学技术.—2006 ,32(1) .—131-133设计了一种新型结构的激光器—双通道放电激励折叠腔TEA CO2激光器。该激光器通过提高脉冲能量输出水平来增加激光输出谱线和激光差分吸收雷达可探测的气体种类。它在增大激光器放电时间长度的同时保证了较小的激光器体积,更好地满足了激光差分吸收雷达光源体积小,重量轻,输出能量高的要求。得到激光器输出能量…     

激光器件 气体激光器

TN248.2 2006042983光栅选线TEA CO2激光快速调谐技术研究=Investigationon rapidly tunable technology of gratingline selection TEACO2laser [刊,中]/程永强(中科院北京电子所.北京(100080)) ,谭荣清…∥激光与红外.—2006 , 36(4) .—250-253研制了一种新型的采用直驱交流伺服电机的光栅选线TEA CO2激光器快速调谐系统,介绍了该系统的构建和设计,包括激光器快速调谐系统的硬件构成、软件设计及系统的运行流程,并进行了初步的实验研究。图6表1参6(杨妹清)TN248.2 2006042984脉冲快放电激励S2激光器电源的研究=Pulsed fast dis-…     

PCB板TEA脉冲CO2激光微孔研究

印刷电路板（PCB）微孔技术是实现高密度互联技术的关键,我国在这方面的研究还刚刚起步,所采用的激光器基本依赖进口,投资成本高,后期维护费用昂贵。研究了聚焦透镜焦距、激光腔内结构、外光阑、扩束系统及其组合方式对PCB激光微孔特性的影响,通过对国产的TEACO2脉冲激光器的激光光束输出模式进行改善、光学系统进行优化,得到了直径在φ170μm以下、孔形良好的微孔。     

激光稳频技术的新发展(Ⅲ)──脉冲激光器的稳频技术和激光波长测量

脉冲激光器的频率稳定和测量,一向是一个较棘手的问题.但近年来,随着脉冲激光器在激光化学、激光光谱、激光雷达和外差检测系统等方面应用的发展,迫使人们去探索稳定脉冲光频的方法.下面介绍的几种脉冲激光稳频方法. 一、长期稳腔式[1]; 稳腔长当然可以稳定光频,但脉冲的持续时间短,较难判断腔长是否已被稳定,故采用一种长期稳腔的方案.这个方案在TEA CO2激光器中得到较合理实施,系统如图1所示,将TEA激光头和连续CO2器件置于同一谐振腔内,以构成混合式TEA激光器,获得单纵模振荡.通过连续器件的光电流稳频系统,以某一谱线(P或R的某一支…     

200mJ光泵浦氨气太赫兹激光器北大核心CSCD

利用光栅选支调谐的TEA CO2激光器作为泵浦源设计了高能量脉冲光泵浦太赫兹激光器。太赫兹激光谐振腔由2m长的石英玻璃管、GaAs泵浦光输入窗和SiO2太赫兹光输出窗组成,氨气充入谐振腔内作为增益介质。太赫兹激光的波长由自主设计的金属线栅F-P干涉仪测量。实验中在多个波长处都获得了强烈的太赫兹光输出,其中151.5μm太赫兹光的输出脉冲能量高达204mJ,对应的泵浦光能量为32J。最后,还给出了利用151.5μm太赫兹光进行透视成像的实验结果。     

一种新型TEA CO_2激光器的实验研究

设计了一种新型结构的激光器———双通道放电激励折叠腔TEA CO2激光器。该激光器通过提高脉冲能量输出水平来增加激光输出谱线数目和激光差分吸收雷达可探测的气体种类。它在增大激光器放电时间长度的同时保证了较小的激光器体积,更好地满足了激光差分吸收雷达光源体积小,重量轻,输出能量高的要求。得到激光器输出能量与气体工作气压的关系曲线,获得了激光器内工作气压与输出脉宽关系曲线,发现脉冲宽度大约在50~70ns之间变化,研究了气体压强对激光器输出脉冲峰值功率的影响。     

TEA CO2激光器输出平顶模按厄米-高斯模的展开

TEA CO2激光器输出光束的能量密度分布一般为平顶型分布.为了给研究和分析TEA CO2激光器输出光束提供一种新的处理方法,采用FGB理论,对实验测量的一台TEA CO2激光器输出的实际平顶型光斑的能量密度分布按厄米-高斯函数进行了展开.根据展开结果,对TEA CO2激光器输出光束的空间分布特性进行了分析与讨论.初步证实了TEA CO2激光器输出光束的能量密度分布可以按厄米-高斯函数展开.     

小型多功能CO2激光器

研制了一种小型多功能CO2激光器。该激光器可以单脉冲、重频或连续方式输出,并可实现输出脉冲频率的编码及波长调谐。激光器谐振腔采用光栅一级振荡,零级输出的工作方式,分别利用声光调Q技术和脉冲放电技术实现了百ns至亚ms量级的脉冲激光输出。详细介绍了该激光器中基于光学角反射器原理设计的光栅调谐定向输出装置,并对其进行了理论计算和论证,实现了不同波长激光的定向、定位输出,获得调谐激光输出谱线超过60条,谱线分辨率优于0.01μm。激光器脉冲重复频率1Hz～10KHz连续可调,输出波长调谐范围9.2μm～10.8μm,激光器连续输出最大功率8W,重复频率1KHz时最小激光脉宽180ns,峰值功率4062W。该激光器在激光与物质相互作用科学领域,特别是激光对物质作用与破坏机理的研究方面具有重要的应用价值。     

具有空间重叠性和时间同步性的双波长TEA CO2激光器研究

提出了一种改进的双波长TEA CO2激光器,不仅具有良好的空间重叠性,而且具有比较理想的时间同步性.该激光器由两个空间上部分重叠的光栅和一个锗镜构成光栅-平面腔,两个光栅前后放置,相互利用,共同建立双频振荡,由锗镜输出双波长激光.通过改变两光栅的有效面积,对两输出脉冲空间重叠性进行调节;通过改变两光栅的角度形成的失谐缩小输出脉冲的时间间隔,达到时间同步性.实验表明,可以在空间重叠性的基础上使两输出脉冲的时间间隔由1 000 ns调整到200 ns.     

用于激光推进的高功率激光器的选择

 从激光推进的要求出发，阐述了用于激光推进的高功率激光器的选择原则，即激光器必须满足：（1）高的平均功率和峰值功率；（2）高的单脉冲能量；（3）高的重复频率；（4）优良的大气传输特性。主要分析了目前YAG固体激光器、自由电子激光器和TEA脉冲CO₂激光器的特点，通过上述4个方面性能的比较，认为在目前水平下，TEA脉冲CO₂激光器是进行激光推进的首选强激光源，其优点表现在：功率可达10kW量级，单脉冲能量可达0.5~1kJ，重复频率为20~40Hz；激光波长处于大气传输窗口，对大气变化不敏感；工作物质快速流动，不存在热透镜效应和破坏阈值；相关光学元件易于制造；光束质量较好；运行成本低。     

Self-organization of five species in a cyclic competition game

Cyclic competition game models, particularly the “rock–paper–scissors” model, play important roles in exploring the problem of multi-species coexistence in spatially ecological systems. We propose an extended “rock–paper–scissors” game to model cyclic interactions among five species, and find that two of the five can coexistent when biodiversity disappears, which is different from the “rock–paper–scissors” game. As the number of fingers is five, we named the new model the “fingers” game, where the thumb, forefinger, middle finger, ring finger, and little finger cyclically dominate their subsequent species and are dominated by their former species. We investigate the “fingers” model in two ways: direct simulations and nonlinear partial differential equations. An important finding is that the number of species in a cyclic competition game has an influence on the emergence of biodiversity. To be specific, the “rock–paper–scissors” model is in favor of maintaining biodiversity in comparison with the “fingers” model when the variables (population size, reproduction rate, selection rate, and migration rate) are the same. It is also shown that the mobility and reproduction rate can promote or jeopardize biodiversity.     

Experimental study on downstep in Chinese intonation

Downstep in pitch contour of Chinese Putonghua is examined using subtly designed sentences by controlling tone combinations. The results show both automatic and nonautomatic downstep phenomena exist in Chinese. In non-automatic downstep, low tones compress downwards the pitch range of the following syllables. and the main influence of downstep is on topline. Low tone not only lower the topline behind it, but also raise the high tones before it, the effects are compatible with each other. In automatic downstep, the topline of pitch contour in intonational phrase is presented as a linear downtrend, but it differs among speakers due to the effect of personal stress practice. In comparison with downstep phenomenon in other tone or non-tone languages, the downstep ratio in Chinese is not constant, and the domain of downstep is not limited within the adjacent tones.     

Contrastive analysis on tone between Putonghua and Taiwan Mandarin

The differences of the pitch and duration of Chinese syllables between Putonghua （PTH） and Taiwan Mandarin （TM） were studied. The speech materials to be used are not only isolated syllables, but also sentences. The results reveal that： For the isolated syllables, T1 and T2 in TM are influenced by Minnan dialect, therefore their pitch are lower than those in PTH. T3 is fall-rise in PTH, while it is fall in TM. Moreover, the syllable duration sequence for different tone is T3〉T2〉T1〉T4 in PTH, while it is T1〉T2〉T3〉T4 in TM. For the syllables in sentences, T2 is mid-rise in PTH, while it is mid-level in TM. And the T3 is longer than T4 but shorter than T1 or T2 in PTH, while it is the shortest in TM. Furthermore the effects of prosodic phrase boundary on duration for different tones are almost the same in PTH, but the lengthening part of T1 or T2 is longer than that of T3 or T4 in TM.     

Abelian-Higgs phase of SU(2) QCD and glueball energy

It is shown that SU(2) QCD admits an dual Abelian-Higgs phase, with a Higgs vacuum of a type-Ⅱ superconductor. This is done by using a connection decomposition for the gluon field and the random-direction approximation. Using a bag picture with soft wall, we presented a calculational procedure for the glueball energy based on the recent proof for wall-vortices [Nucl. Phys. B 741(2006)1].     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Signal generation in an isotropic medium in scanning electron acoustic microscope

Based on the research in Ref. [5][Materials Science and Engineering, 1989; A122： 57 63], an improved model of heat source is set up, the different modes of Lamb wave in an isotropic sample generated by a chopped electron beam at frequency f are obtained with integral transform and normal function expansion method, and the output signal of PZT coupled at the back surface of the sample is found out. The generation mechanism of SEAM （Scanning Electron Acoustic Microscopy） signal is discussed. It shows that the SEAM is a near field imaging technique with high spatial resolution and its best lateral spatial resolution is about 2√2α （α is the radius of the focused electron beam）. Some of experimental results of SEAM images are presented in the paper and it shows that the spatial resolution of SEAM is better than 0.5 μm and smaller than the thermal diffusion length of the sample. Therefore the character of near field imaging in SEAM is also proved experimentally.     

High efficiency filtering using two-dimensional photonic crystal coupled cavity structures

Transmission spectra of coupled cavity structures (CCSs) in two-dimensional (2D) photonic crystals (PCs) are investigated using a coupled mode theory, and an optical filter based on CCS is proposed. The performance of the filter is investigated using finite-difference time-domain (FDTD) method, and the results show that within a very short coupling distance of about 3λ, where λ is the wavelength of signal in vacuum, the incident signals with different frequencies are separated into different channels with a contrast ratio of 20 dB. The advantages of this kind of filter are small size and easily tunable operation frequencies.     

Real-time restoration of rotational blurred image using gradient-loading

The key to the restoration of rotational motion blurred image is how to restore the image under a low cost and to correct the irreversibility of the degradation function matrix.Based on the special qualities of degradation function matrix and precise deduction in space-domain, we present a new approach using gradient-loading for restoration of rotational blurred image.By easily adding a gradient operator, the irreversibility of the original matrix is corrected and can be applied for inverse filtering then.Gradientloading is the optimized approach which combines the advantages of both the approaches using constrained least square filtering and traditional diagonal-loading.Compared with the approach using least square filtering, its peak signal-to-noise ratio (PSNR) is improved from 3.18 to 6.46dB, while the computing time is reduced to 1/2-1/3.Experimental results demonstrate the effectiveness, noise-resistibility, robustness, and low complexity of this approach, which make it more suitable for real-time environment.     

All-Optical Logic Device Using Bent Nonlinear Tapered Y-Junction Waveguide Structure

We propose an all-optical logic device made of a bent tapered Y-junction waveguide with a Kerr-type nonlinear interface. It could provide an AND gate, OR gate, and exclusive-OR (XOR) gate. We could obtain different transmission results by adjusting the bending angle. The numerical simulation results show that the device functions as AND, OR, and XOR gates.