多阶游程长度受限编码的光盘读出信号

多阶游程长度受限(ML-RLL)编码可以在保持原有记录符尺寸和记录单元数量的情况下将CD光盘存储容量提高2.4倍。借助标量衍射理论建立了多阶游程长度受限记录符的计算模型,对采用多阶游程长度受限编码的CD光盘的读出信号进行了仿真分析。结果表明,记录坑长度的变化对读出信号幅值影响较小,有利于将记录坑长度和记录坑的宽度两个参数进行分离检测,但在3T长度、不同宽度的记录坑相连的情况下,从读出信号中很难分辨出记录符的分界位置。     

一种4阶RLL(2,12)调制码的CPLD的实现

现有的光存储系统采用二值的记录模式,普遍使用的是游程长度受限(Run-length limited,RLL)的调制编码,并将信息编码记录在信息符的长度中。新型多阶RLL光存储采用多阶RLL编码方案,将信息同时记录在信息符的长度和信号幅值中,从而大幅度地提高了光盘的容量。为了研究多阶RLL编码的逻辑正确性和电路复杂度,设计了基于可编程逻辑器件的硬件平台。多阶RLL编码可以用有限数量逻辑门实现编码,有望用于未来高密度多阶光存储系统。     

光存储系统中的游程长度受限编码

游程长度受限编码广泛应用于光(磁)存储系统中,通过将用户数据转换为符合特定信道约束的码元序列,从而提高数据传输的效率与可靠性。较为系统的介绍了游程长度受限编码的基本理论,从原理上分析了有限状态编码器与滑块分组译码器模型,并对主要的编码构造方法进行了概述,展望了游程长度受限编码的发展方向。     

信息光学 光学记录、存储与器件

TP333.42006054289光存储系统中的游程长度受限编码=Run-length-li mitedcodes for optical storage system[刊,中]/胡华(清华大学精密仪器与机械学系,光盘国家工程研究中心.北京(100084)),徐端颐…//光学技术.—2006,32(3).—323-326,329游程长度受限编码广泛应用于光(磁)存储系统中,通过将用户数据转换为符合特定信道约束的码元序列,从而提高数据传输的效率与可靠性。介绍了游程长度受限编码的基本理论,从原理上分析了有限状态编码器与滑块分组译码器模型,并对主要的编码构造方法进行了概述,展望了游程长度受限编码的发展方向。图4参16(…     

光致变色多阶游程光存储研究

多阶游程存储是一种不改变光学系统而显著提高光存储容量和数据传输率的新方法.介绍了光致变色多阶游程存储原理和实验系统.提出了基于光致变色原理的多阶游程存储数学模型，该模型反映了记录符反射率与曝光功率、曝光时间之间的非线性关系，并在此基础上确定了光致变色多阶游程存储的写策略.基于650nm光致变色材料进行了4阶游程存储的动态实验.结果表明，实验中采用的650nm光致变色材料可用于多阶游程存储，采用的写策略能够有效地使记录信道线性化，利于采用适合线性系统的信号处理方法. 关键词： 多阶游程 光致变色 光存储 写策略     

高速电视图象数据实时压缩技术的研究

本文讨论以高速电视图象为对象的数据压缩技术，论述采用流水线法对图象数据实施变表游程长度编码，满足高速电视图象数据压缩实时，高速，无损的要求，并进行了实验验证。     

有序抖动半调图像的无损压缩算法

在分析不同有序抖动模板对所生成抖动半调图像的影响因素基础上,设计了尺度变化的分块及块间异或预处理策略,大大提高了二值游程长度.进而使用游程和哈夫曼相结合的编码思想提出了一种新的有序抖动半调图像无损压缩算法.仿真实验表明,该算法在编码效率上具有较大优势.     

用于多阶存储系统的3元(2,10)游程受限编码

提出了一种用于多阶光存储的3元游程受限的调制编码。给出的3元(2,10)游程受限编码可以由一个3状态的有限状态机表示,其记录密度为2.14(比特/最小记录符),高于已有的3元(2,10)编码。介绍了该编码的编码和解码步骤,并给出了控制编码后序列直流分量的方法。对不同游程受限编码的主要性能参数进行了比较。     

多阶光存储研究进展

多阶光存储是一种在不改变原有光路和机械系统的情况下,利用先进的信号处理与调制编码技术,显著提高存储容量和数据传输率的新型技术。综述了多阶光存储的发展历史及研究现状,并针对多阶光存储的两种类型(信号多阶和介质多阶),列举了几种典型的多阶光存储方案。从本质上分析了信号多阶技术和介质多阶技术的不同,展望了其发展方向。     

游程长度受限码RLL(4,18)的研究

介绍了一种新的用于高密度光盘存储的游程长度受限码。给出RLL(4,18)码的构造方法和编解码步骤。对RLL(4,18)码的编码器和解码器进行了CPLD实现。对不同游程长度受限码的主要性能参数进行了比较。     

多阶光盘系统中帧同步信号的自适应检测

多阶光存储是提高光盘存储容量和数据传输率的重要途径。帧同步信号在多阶光盘的重放系统中起着很重要的作用。分析了实际多阶存储系统中帧同步信号的特征和信号检测的特点,提出了一种自适应检测帧同步码的方法。实验结果表明,该方法的精度可以满足系统的需求。     

Multilevel read-only optical recording methods

The advantages of read-only storage is the predominance of optical recording relative to magnetic and other rewritable methods. Multilevel (ML) read-only technology has been a trend to improve the data capacity and transfer rate. Based on the principle and coding method of ML, this paper demonstrates some ML read-only recording methods, of which a new ML read-only recording is developed. This recording method integrates amplitude modulation achieved by the reaction mechanism of physics and chemistry of photoresist with the run-length-limited technology. The discs can be achieved using standard photoresist mastering and replication techniques with great compatibility to conventional binary read-only discs.     

Approximated Vector Diffraction Theory for Readout Signal of Multi-Level Run-Length-Limited Discs

Multi-level run-length-limited read-only optical storage is a kind of high density storage method. The width and height of recording marks are varied with different levels, which is the key technology for the optical storage. Then the readout signal of these discs with complex recording marks is computed by vector analysis method, it is very hard and time-consuming. Approximated vector computation combines the convenience of scalar method and precision of vector method, which is effective for multi-level run-length-limited read-only optical storage.     

Correction to: Generation of amplitude- and phase-modulated signal beam with a phase-only spatial light modulator and its detection by the transport of intensity equation method for holographic data storage

This study evaluates a novel holographic data storage (HDS) that uses a phase-only spatial light modulator (SLM) for the multilevel complex amplitude modulation of a signal beam and the transport of intensity equation (TIE) method to detect the signal beam without interferometry, to increase the capacity of the HDS, simplifying its optical system, and improving the stability of the signal beam modulation and detection. Both the amplitude and phase of the signal beam were modulated by a computer-generated hologram displayed in a phase-only SLM, a 4-f optical system, and a pinhole placed in the Fourier plane. The complex amplitude-modulated signal beam generated by this scheme does not always perfectly match the target complex amplitude, and deviations from the amplitude and phase of the target complex amplitude may exist. It is unclear whether the TIE method, which is sensitive to the state of the beam intensity and the phase distributions to be detected (such as zero-intensity points and phase discontinuities), can accurately detect a signal beam whose complex amplitude is modulated by the modulation scheme with a phase-only SLM. Here, we demonstrate via numerical simulations and experiments that several methods of complex amplitude generation using a phase-only SLM can achieve multilevel modulation of the amplitude and phase of a signal beam and are suitable for detection by the TIE method in HDS.

     

Transient two-wave mixing in a linear configuration of an adaptive interferometer based on Er-doped fiber with saturable absorption

We report results of transient two-wave mixing (TWM) in Er-doped fibers with saturable absorption in a linear configuration of an adaptive interferometric vibrometer with essentially different powers of recording waves. The TWM signal modulation depth detected in the weak (reflected) wave was shown to be twice as strong as in the symmetric configuration with equal recording powers. In accordance with theoretical predictions, the experimentally observed TWM signal amplitude grew continuously with the fiber optical density in the whole investigated range of alpha(0)L approximately 0.2-4. At the recording wavelength 1492 nm it proved to be quite close to the theoretical limit of approximately alpha(0)L/2 for weakly absorbing fibers, and in 1-m-long fiber of high optical density reached maximal value of approximately 0.8. The TWM response time went down with the recording light power and for P(0) approximately 10 mW was in the submillisecond region.     

近场记录光盘的写入能量的研究

近场记录光盘是一种新的光盘记录技术,它有二个特点：（１）极高的记录密度;（２）很高的寻道速度。本文介绍了近场光盘技术的特性;提出了近场光盘记录技术中动态条件下读写中的写入能量地头盘间的能量传输问题进行了仿真计算。     

Pit Depth and Width Modulation Multilevel Run-Length Limited Read-Only Optical Storage

When the techniques of integrating the variation of the conventional DVD,the high-density multilevel run-length pit depth and width simultaneously are adopted to limited read-only optical storage method is achieved. The dynamic range of readout signal is greatly enlarged in comparison with keeping one parameter varied, and the recording levels number can be obviously increased. The discs can be manufactured using standard photoresist mastering and replication techniques with great compatibility to conventional binary read-only discs. Experimental results show that eight-level read-only optical disc can be realized and the capacity can be increased to 20 GB.