湍流对离轴列阵高斯光束相干与非相干合成的影响

研究了湍流对离轴列阵高斯光束相干与非相干合成的影响.推导出了相干合成光束的传输方程.采用二阶矩束宽、桶中功率和参数β作为光束质量评价参数比较了离轴列阵高斯光束通过湍流大气的相干与非相干合成,并对主要结果给予了合理的物理解释.研究表明：一方面,不论是相干合成还是非相干合成,湍流都使得合成光束扩展、峰值光强下降,并且子光束数越多,合成光束受湍流影响就越小.另一方面,非相干合成光束较相干合成光束受到湍流的影响要小. 关键词： 相干与非相干合成 湍流大气 离轴列阵高斯光束     

大气湍流对径向分布高斯列阵光束扩展和方向性的影响

采用积分变换的技巧,推导出了径向分布高斯列阵光束通过湍流大气传输的二阶矩束宽和远场发散角的解析公式,并详细研究了大气湍流对光束扩展和方向性的影响.研究表明,相干合成情况下,子光束数N越小、径向分布半径r₀越大,列阵光束扩展受湍流影响越小.相干较非相干合成时列阵光束的扩展小,但非相干合成时列阵光束扩展受湍流的影响比相干合成时的小.特别地,N足够小或r₀足够大时,相干与非相干合成列阵光束的远场束宽相等.另一方面,还给出了相干和非相干合成径向分布高斯列阵 关键词： 径向分布高斯列阵光束 大气湍流 相干和非相干合成 二阶矩束宽     

Incoherent and coherent master oscillator/power stimulated Brillouin beam combination for amplifier system with scattering mirror

In this paper, we studied incoherent and coherent beam combining for the master oscillator/power amplifier （MOPA） system with stimulated Brillouin scattering （SBS） mirror. Optic field intensity distributions in the near and far field are numerically calculated for the two kinds of system. The results show that good beam quality in the far field could be obtained. It provides a theoretical basis for experimental research in the future.     

Analysis of beam quality for the laser beams after spectral beam combining

The beam quality of the laser beams after spectral beam combining (SBC) has been analyzed in this paper. Based on the propagation model of the spectral beam combining system, the expression for the output field of an individual beam passing through the spectral beam combining system with lens aberration has been given and the intensity distribution of the combined beam has been studied by the principle of incoherent superposition. Consequently, according to the intensity second-order moments method, the M²-factor of the combined beam has been calculated and the effect of lens aberration on the characteristics of the combined beam has been analyzed quantitatively. It can be shown that the SBC system can improve the beam quality of laser array significantly, and the M²-factor of the combined beam passing through the ideal spectral beam combining system is almost the same as that of an individual beam. For the spectral beam combining system with lens aberration, the spherical aberration has greater effect on the off-axis beam than on the on-axis beam, and the beam quality of combined beam degrades with increase in lens aberration.     

Influence of turbulent atmosphere on the far-field coherent combined beam quality

Propagation of coherent combined laser beams in turbulent atmosphere is numerically studied based on the extended Huygens-Fresnel principle. By choosing beam propagation factor (BPF) and beam quality factor (BQ) to characterize the far-field irradiance distribution properties, the influence of turbulence on far-field coherent combined beam quality is studied in detail. The investigation reveals that with the coherence length decreasing, the irradiance distribution pattern evolves from typical non-Gaussian shape with multiple side-lobes into Gaussian shape which is seen in the incoherent combining case. In weak turbulent atmosphere, the far-field beam quality suffers less when the 1aser array gets more compact and operates at a longer wavelength. In strong turbulent atmosphere, the far-field beam quality degrades into the incoherent combining case without any relationship with the fill factor and laser wavelength.     

Comparative study on the propagation performance of coherently combined and incoherently combined beams

Taking phase error, turbulent atmosphere, jitter, vacancy factor and tilt error into consideration, we propose a general propagation formula for both coherent and incoherent combined beams with different kinds of aberrations. Comparative study on the propagation performance of coherent and incoherent combined beams is presented. Beam propagation factor (BPF) defined as laser output power in a specified far-field bucket divided by the total output power radiating from the effective near-field exit aperture of the laser beam is introduced as the beam quality factor to give a quantitative study. It is revealed that the coherent combined beam has great advantage when propagating in free-space compared with the incoherent combined beams. However, the coherent combined beam is more sensitive to the environmental aberrations, and the beam quality degrades faster with an increase in the aberrations’ intensity. Scintillation index as the high moments of the combined intensity field is also studied. It is revealed that both coherent and incoherent combined beams exhibit less scintillations compared with a single-aperture beam, and the incoherent combined beam demonstrates better scintillations reducing the performance. Our methodology offers an all-round performance evaluation on the two kinds of laser systems.     

非傍轴部分相干厄米-高斯光束的相干和非相干合成

推导出二维非傍轴部分相干厄米-高斯（H-G）光束相干合成和非相干合成的交叉谱密度和光强的解析公式,并分析了一些特例. 合成光束的光强不仅决定于f参数,f_σ参数,离轴参数,合成光束的束数和阶数以及传输距离z,而且还决定于合成方式. 对部分相干光的相干合成和非相干合成概念做了物理诠释,其正确性为数值计算例证实. 关键词： 部分相干光的相干和非相干合成 非傍轴部分相干厄米-高斯（H-G）光束 自由空间中的传输方程     

Beam quality factor of mixed modes emerging from a multimode step-index fiber

The beam quality factors (or M² parameter) of coherent and incoherent superposition of the several lower-order LP modes emerging from a step-index fiber have been calculated by using the second-order moment method. The results indicate that, for an individual LP mode, the M² parameter takes its maximum value when the normalized frequency V of the step-index fiber approaches the cut-off frequency, and it gradually becomes constant as V increases. In the case of incoherent superposition, the larger the fraction intensity carried by the higher-order mode, the larger the beam quality factor M². Under certain circumstances, the value of the M² parameter of the mixed mode that comprises several LP-modes contents may become even smaller and closer to the ideal Gaussian beam than that of the fundamental mode in a step-index fiber. However, in the case of the coherent superposition, the value of the M² parameter of the mixed mode may be greater than that of the higher-order constituent mode. The results reported here could be helpful for the application of the high-power fiber laser systems.     

Propagation characteristics of the Yb-doped fiber lasers after spectral beam combining by the VBGs

The propagation model for the spectral beam combining system of five Yb-doped fiber laser beams by the volume Bragg gratings (VBGs) has been built up. Considering the surface distortion by thermal effect, the intensity of an individual beam passing through the spectral beam combining system by the VBGs with deformation has been analyzed numerically and iteratively by using finite-different and sparse matrix methods, and the intensity of combined beam has been studied by the principle of incoherent superposition. Consequently, according to the intensity second-order moments method, the M²-factor of the combined beam has been calculated. The effects of deformation of the VBGs on the intensity, the combining efficiency, the M²-factor and the power in the bucket of the combined beam have been analyzed quantitatively. It can be shown that the effects of the deformation of the VBGs on the intensity distribution of combined beam become more and more obvious with the increasing of the deformation of the VBGs. The results show that the surface distortion of the VBGs due to high-power lasers dramatically degrades both the beam quality of the combined beam and the combining efficiency of the spectral beam combining system.     

双曲余弦高斯列阵光束在湍流大气中的光束传输因子

本文推导出了双曲余弦高斯(ChG)列阵光束在湍流大气中的光束传输因子( M ^{2因子)的解析公式,并采用相对 M 2因子研究了湍流对 M 2因子的影响.研究表明,在湍流大气中 M 2因子不再是一个传输不变量,湍流使得 M 2因子增大.非相干合成情况下, M 2因子随着传输距离、光束参数、相对子光束间距和子光束数目的增大而增大.相干合成情况下, M 2因子随光束参数和相对子光束间距的增大呈现振荡上升.相干合成情况下的 M 2因子比 关键词： M2因子)')" href="#">光束传输因子(M2因子) 光束质量 双曲余弦高斯列阵光束 大气湍流}