多孔硅／激光染料复合体的发光

将激光染料分子有效地嵌入多孔硅中，获得多孔硅／染料分子复合体，嵌入微量梁料分子时，复合体的发光兼有多孔硅和激光染料两者的发光特征，增加染料分子的嵌入量，复合体的发光增强，荧光的时间响应快、脉宽窄，主要表面为激光染料的发光特性。     

多孔硅银淀积表面RhB染料分子的表面增强Raman散射

我们采用多孔硅和多孔硅银淀积表面作为衬底研究了ＲｈＢ染料分子的表面增强Ｒａ ｍａｎ散射。在多孔硅表面,ＲｈＢ染料分子的Ｒａｍａｎ散射有大约１０倍的表面增强效果;而在多孔硅的银淀积表面,表现出超过１０４表面增强。通过多孔硅表面银颗粒对ＲｈＢ染料分子荧光的抑制和对Ｒａｍａｎ散射的表面增强,我们获得了谱峰清晰的ＲｈＢ染料分子Ｒａｍａｎ散射谱     

重复脉冲闪光灯抽运的染料激光器

调频激光器,特别是染料激光器,作为光谱光源,在激光光谱学中起十分重要的作用。染料激光器的抽运方式很多。其中闪光灯抽运的染料激光器,由于装置较简单和总效率较高而被广泛地应用。本文报道一台重复脉冲闪光灯抽运的染料激光器的初步实验结果。 一、激发机理 虽然染料分子是由许多原子组成的,但是它的能级以及吸收和发射过程可以模仿简单的双原子分子而画成如图1所示的能级图[1].染料激光器的吸收和发射过程与染料分子的四个能态有关:分子吸收抽运辐射后,从基态激发到第一(或第二)激发单态S1(或S2)的较高振动能级,并很快地通过非辐射跃迁…     

黄腐酸对菁染料超分子组装及手性调控研究

利用菁染料超分子作为分子探针对黄腐酸进行标记,检测黄腐酸和药效机制,对于生命科学和药物化学领域的发展具有重要意义。采用紫外-可见吸收光谱和圆二色谱研究黄腐酸作为模板对不同结构菁染料超分子的组装及手性调控。结果表明:黄腐酸能诱导三种菁染料J-聚集体解聚为单体并伴有体系表观颜色的变化,并与菁染料单体之间具有很高亲和力。黄腐酸作为模板不仅可以诱导MTC形成具有一定手性的H-聚集体,而且能使MTC的H-聚集体的手性出现两次反转;还可以诱导ETC的J-聚集体发生分子间的重排,最终形成具有左手螺旋性的J-聚集体。除此之外,黄腐酸还对PTC的J-聚集体圆二色谱信号有显著的影响。同时,菁染料中位取代基影响到相互作用的能力:中位取代基越小,菁染料聚集体与黄腐酸的作用越强。菁染料与黄腐酸的结合能力大小为MTC>ETC>PTC。菁染料超分子可作为一类优良的分子探针对黄腐酸进行特异性识别并可达到可视化的检测效果。     

利用带模型探讨染料环形腔系统的光学双稳特性

利用染料分子带模型，探讨了染料环形腔系统的光学双稳特性，得到光学双稳可在一个比较大的频率范围内实现；其双稳区域是染料分子带结构参数（带宽及偶极分布的Ｌｏｒｅｎｔｚｉａｎ宽度等）的函数． 关键词：     

激光单分子探测技术的研究

文中介绍利用激光激发分子荧光的方法探测液体中单个染料分子的新技术，以及作者自行设计和研制的激光单分子探测谱仪。通过探测“光子爆发”，把单个染料分子的荧光同很强的背景杂散光区别开来。进一步用８２ＭＨｚ高重复频率的锁模激光器和时间门符合技术，成功地消除了Ｒａｍａｎ散射光。目前该谱仪达到的检测限为灵敏区内仅有～７个Ｒ６Ｇ分子。     

取代效应对脂滴检测NAPBr染料分子的双光子吸收和激发态性质影响的理论探究

双光子荧光染料分子在生物医学成像中具有广阔的应用前景,但取代效应对分子结构以及光物理性质影响的探求相对匮乏. 本文设计并研究了一系列脂滴检测染料分子,分析了分子的光学性质以及无辐射跃迁等. 通过分子内弱相互作用和电子- 空穴布居分析,阐述了其内在机理. 结果表明,所研究的分子均具有优良的光物理性能、高效荧光量子产量、大的斯托克斯位移以及显著的双光子吸收截面等. 本工作合理地解释了实验现象并阐述了取代效应对脂滴检测NAPBr染料分子的双光子吸收和激发态性质的影响,这为设计新型的高效有机分子提供了理论指导.     

表面增强能量转移效应的研究

通过分析2、2′菁染料水溶液、银胶体以及2、2′菁染料吸附于银胶表面时的吸收光谱得知,2、2′菁染料吸附于银胶表面时,有J聚集体出现,通过分析基频及高阶线性Raman光谱,证实了一些低波数的Raman信号是由J聚集体产生的,从而进一步证实了吸附于银胶表面的2、2′菁染料以单体和J聚集体形式共存.同时,由吸收光谱还可以看出,2、2′菁染料分子及其J聚集体分子的吸收带都处于银胶吸收带的半高宽范围内,满足共振条件,当用不同激发波长(514.5 nm和488 nm)的光激发吸附于银胶表面的2、2′菁染料时,观察到了J聚集体的敏化荧光,而用此激发光激发2、2′菁染料水溶液时,就没有观察到J聚集体的敏化荧光,从而说明了银胶表面的存在,加速了单体2、2′菁染料分子与其J聚集体分子之间的能量转移速率.     

溶胶凝胶介孔AlPO_4玻璃镶嵌香豆素102的光学性质

运用新型溶胶凝胶法制备了高比表面积介孔AlPO4玻璃,并通过浸渍法将香豆素102染料镶嵌入该玻璃中。利用激发光谱和荧光光谱方法研究了香豆素102染料镶嵌浓度对光学性质和染料分子的形态的影响。激发光谱结果表明,香豆素102单体分子在介孔AlPO4玻璃中的激发带主要在366 nm处。随着染料摩尔分数从5×10-6mol/L增加到5×10-3mol/L,激发峰分裂并逐渐增宽,说明染料分子在介孔玻璃中逐渐聚集成J-二聚体。荧光光谱结果显示,随着染料摩尔分数从5×10-6mol/L增加到5×10-3mol/L,主要荧光峰从459 nm红移到479 nm。在浓度5×10-3mol/L时,可调谐宽度达135 nm。浸析实验证明染料在介孔AlPO4玻璃中稳定性很好。     

多孔硅吸附染料分子的荧光增强效应

报道了利用多孔硅独特的表面特性,吸附染料分子后,使得染料的荧光得到很大的增强,并观察到了这种吸附过程中彼此间的能量转移过程。对染料的荧光增强机理及实验结果进行了讨论。     

Energy transfer in flashlamp pumped organic dye lasers

The pumping characteristics of dye lasers using multiple dyes are discussed. It turns out that varying the dye concentration may change considerably the portion of the pump light spectrum which is effective in creating population inversion. Thus the effect of an energy transfer dye depends strongly on the concentration of the lasing dye. Multiple dye systems are shown to have larger tuning ranges than single dye systems, and should exhibit improved tuned linewidth as well as better dye stability. Experimental results are presented for a common dye combination (Rhodamine 6G and Coumarin 6). Measurements were made both by directly mixing the auxiliary dye with the lasing dye, and also by using the auxiliary dye as a fluorescent spectral filter placed between the pump light source and the laser cell; the results are compared.     

Laser dye mixtures

Properties necessary to obtain efficient laser action from laser dyes are reviewed. It is concluded that the dye added (booster dye) to a laser dye (active dye) solution to increase its efficiency need not necessarily be a laser dye. This is illustrated by considering different spectral locations of a triplet-triplet absorption band present in the booster dye relative to the location of the laser action region (part of the fluorescence spectrum) of the active laser dye. Conditions required for booster dyes to form efficient dye mixtures are given. These observations are used to explain why specific well known laser dye mixtures show efficient, little, or no laser action at all.     

含氟碳菁染料聚集行为的研究

本文对五种不同结构的含氟碳菁染料的甲醇溶液及吸附在碘溴化银T 颗粒表面的聚集行为进行了研究 ,测定了照相性能 ,计算了增感倍率。Dye1 ,Dye2 ,Dye3在甲醇溶液中测得的单分子态吸收曲线 ,当取代基从C2 H5→CH3→无取代基时 ,最大吸收峰对应的波长向短波方向移动 ;乙基取代基的增感染料 (Dye1 )吸附在碘溴化银表面形成的J 聚集态峰值较高 ,对应的增感倍率也高。没有取代基的增感染料 (Dye3)不形成J 聚集 ,增感倍率低 ,有减感作用。Dye4与Dye5相比 ,Dye4具有尖而窄的J 聚集反射光谱 ,增感倍率高。结果表明 :不同结构的增感染料吸附在卤化银颗粒上形成的J 聚集态不同 ,吸收谱带窄的J 聚集态增感染料具有较高的增感倍率。     

高分子添加剂对激光染料荧光的增强效应

本文研究以水作溶剂的Rh-6G激光染料中加入高分子添加剂——聚乙二醇(分子量为6000)引起的染料荧光的增强效应。通过荧光光谱,吸收光谱与染料浓度,添加剂含量的关系的实验研究,定量地给出了不同添加剂量对荧光的增强作用。表明了荧光增强效应的机理主要是添加剂抑制了二聚物的形成。     

Dual-wavelength operation of two coupled dye lasers

The analysis of the influence of an intracavity absorbing dye cell on the spectral characteristics of a free running dye laser leads to the operation of two coupled dye lasers. A powerful flashlamp-pumped dye ring laser pumps a secondary intracavity dye laser with a conversion efficiency of 30 %. Both wavelengths are independently tunable and cover the spectral range from 580 nm to 652 nm in the case of the dye combination rhodamine 6G and cresyl violet.     

Undamped relaxation oscillations due to self-gain-switching of laser dye mixtures

Undamped relaxation oscillations were observed from a short, simple dye laser using a laser dye mixture which was pumped at 337 nm using ns pulses. The dye solution contained Rh101 as first laser dye, together with DTDCI in double function as saturable absorber and second laser dye. Two trains of intense laser pulses were generated near 619 and 685 nm, with pulse durations of ca. 4 and 2 times the resonator transit time, respectively. This method of short-pulse generation is related to double mode-locking of dye lasers. Model calculations are used to describe the pulse generation by self-gain-switching, and to estimate radiative and nonradiative contributions towards saturation of the absorber dye.     

Study of concentration-dependent quantum yield of Rhodamine 6G by gold nanoparticles using thermal-lens technique

Tailoring optical properties of the dye molecules using metal nanoparticles is a burgeoning area of research. In this work, we report our results on the studies of how the absorption and emission behavior of Rhodamine 6G dye is tailored using gold nanoparticles. Furthermore, the influence of dye concentration on these properties for a given concentration of nanoparticles in the dye-nanoparticle mixture is investigated. In addition, the difference between the concentration-dependent fluorescence quantum yield of the dye molecules is measured in the absence and presence of nanoparticles using the dual-beam thermal-lens technique. Our absorption spectral studies show additional spectral features due to nanoparticle aggregation on interaction with cationic Rhodamine 6G dye. Dye concentration-dependent steady-state fluorescence studies in the presence of nanoparticles indicate a blue shift in peak fluorescence emission wavelength. The quantum yield value measured using thermal-lens technique exhibit a non-monotonic behavior with dye concentration with substantial quenching for lower dye concentrations. The results are interpreted in terms of dye–nanoparticle interaction and the formation of dye shell around the nanoparticle.     

Comparative photophysical and energy transfer studies of C480:C535 binary dye mixture in solid and liquid environments

The spectral behaviour of the individual dyes (C480 and C535) is discussed. The absorption and fluorescence spectral profiles of the dyes, in solid and liquid environments, are identical. Dye doped polymer rods of donor dye (C480) without the acceptor dye (C535), acceptor dye (C535) without the donor dye (C480) and donor dye with acceptor dye at different acceptor concentrations are synthesized. Energy transfer technique is studied, in detail, using these rods. The results obtained are compared with their respective liquid mixtures. Optical gain of the acceptor dye with and without the donor dye is determined experimentally, in both solid and liquid media. The gain of the acceptor with donor increases and then decreases with increase in acceptor concentration. Both solid and liquid media show similar trends. But, the gain coefficient in the solid matrix is less than that in the liquid medium. The photobleaching of the dye doped polymer rod under nitrogen laser excitation is studied.     

Surface anchoring effect on guest–host ferroelectric liquid crystal response time – an electro-optical investigation

The effect is reported of surface anchoring on various electro-optical parameters of a pure ferroelectric liquid crystal (FLC) and five mixtures with different concentrations of dye. The Anthraquinone D5 dye was used as guest entity, whereas Felix 17-000 was used as host in this investigation. The presence of dye molecules in the FLC dramatically affects the electro-optical properties compared with those of the pure system. Electro-optical parameters such as spontaneous polarization and rotational viscosity not only change with the addition of dye but they are also strongly dependent on the concentration of dye in pure FLC. The effect of dye molecules on the anchoring energy of the pure FLC system was also investigated. Due to strong anchoring energy on FLC substrate, its effect on response time was also studied. An improvement in the contrast ratio after dye doping was observed. The value of spontaneous polarization increases due to addition of dye, suggesting that molecular alignment improves, which is very useful from the application point of view.