共查询到20条相似文献,搜索用时 156 毫秒
1.
2.
航空发动机燃烧室高精度数值模拟需要合理的蒸发模型,目前蒸发模型对两相湍流燃烧模拟的影响定量研究不足。乙醇较其他燃料蒸发潜热大,对蒸发模型敏感。文章采用LES求解湍流、TPDF解决湍流和化学反应的相互作用,研究AbramzonSirignano(A-S)蒸发模型、Spalding蒸发模型和厚交换层(NC-TEL)蒸发模型对高雷诺数乙醇两相湍流射流火焰的数值模拟结果并与实验数据对比。定量分析不同蒸发模型对温度、混合物分数及液相分布等的规律性影响发现,A-S蒸发模型在射流中心区域与实验数据拟合较好,在其它区域表现欠佳;Spalding模型在x/d=10截面上模拟结果良好;NC-TEL蒸发模型在x/d>10截面及远离射流中心方向上的模拟结果表现最好。与其他模型相比,NC-TEL蒸发模型在液相速度上与实验数据相差最大为21.9%,表现最好。 相似文献
3.
4.
5.
采用薄层模型brick-wall方法,计算了一般球对称带电蒸发黑洞Dirac场的熵,通过适当选择时间依赖的截断因子,仍可得出黑洞熵与视界面积成正比的结论.
关键词:
熵
蒸发黑洞
薄层模型
Dirac场
Dirac方程 相似文献
6.
对高粘度液体在正弦形波纹壁面上的自由降落和蒸发建立了分析模型。对控制微分方程及边界条件作无量纲处理,引入流函数,采用摄动展开得到了0级近似和一级近似的微分方程组,讨论了液膜的流动和传热特性与壁面之间的关系。 相似文献
7.
8.
9.
10.
研究了非旋波近似下Jaynes-Cummings(J-C)模型中的场熵演化规律,并与旋波近似下的相应结果进行比较,讨论了虚光子过程对场熵演化的影响。 相似文献
11.
12.
13.
比较了绿激光经尿道水下汽化前列腺手术与其它传统几种手术的性能、特点,阐述了绿激光汽化前列腺的优势:手术属微创,手术时间短,无出血,无需或只需短时间插尿管,恢复快,副作用较小,比较安全等.绿激光前列腺手术的特点是由绿激光水下汽化生物组织的机理决定的.532nm波长的绿激光在汽化前列腺时,几乎可以透过水,激光能量主要集中于组织表面的,表面效应好,同时又有一定的体效应,可以较快地汽化组织,又具有较好的止血效果. 相似文献
14.
15.
研究了高能短脉冲激光薄膜制备的整个烧蚀过程.首先建立了基于超热理论的烧蚀模型,然 后利用较为符合实际的高斯分布表示脉冲激光输入能量密度,给出了考虑蒸发效应不同阶段 的烧蚀状态方程.结合适当的边界条件,以Si靶材为例,利用有限差分法得到了靶材在各个 阶段温度随时间和烧蚀深度的演化分布规律及表面蒸发速度与烧蚀深度在不同激光辐照强度 下随时间的演化规律.结果表明,在脉冲激光辐照阶段,靶材表面的蒸发效应使得靶材表面 温度上升显著放缓;在激光辐照强度接近相爆炸能量阈值时,蒸发速度与蒸发厚度的变化由 于逆流现象将显著放缓.还得到了考虑了熔融弛豫时间及蒸发效应的固-液界面随时间的演化 方程,这一结论较先前工作更具有普适性.
关键词:
脉冲激光烧蚀
热流方程
温度演化
有限差分法 相似文献
16.
汽化器是LNG汽车燃料系统的重要设备。本文提出将汽化器换热过程分为过冷段、沸腾段与过热段的简化方法,并进行了LNG汽车起步阶段与正常行驶阶段汽化器性能模拟实验研究。 相似文献
17.
水的比汽化热测量装置的改进 总被引:1,自引:1,他引:0
对传统的测量水的比汽化热实验中的加热和输气装置进行改进,采用集成电路温度传感器测量量热器中温度,实现了水比汽化热非电量电测,较准确地测量水的比汽化热. 相似文献
18.
ZHANG Duan-Ming FANG Ran-Ran LI Zhi-Hua GUAN Li LI Li TAN Xin-Yu LIU Dan LIU Gao-Bin HU De-Zhi 《理论物理通讯》2007,48(7):163-168
We develop a new synthetical model of high-power pulsed laser ablation, which considers the dynamic absorptance, vaporization, and plasma shielding. And the corresponding heat conduction equations with the initial and boundary conditions are given. The numerical solutions are obtained under the reasonable technical parameter conditions by taking YBa2CusO7 target for example. The space-dependence and time-dependence of temperature in target at a certain laser fluence are presented, then, the transmitted intensity through plasma plume, space-dependence of temperature and ablation rate for different laser fluences are significantly analyzed. As a result, the satisfactorily good agreement between our numerical results and experimental results indicates that the influences of the dynamic absorptance, vaporization, and plasma shielding cannot be neglected. Taking all the three mechanisms above simultaneously into account for the first time, we cause the present model to be more practical. 相似文献
19.
利用超声雾化器制作的冷风机,具有水雾颗粒更细,更容易进行交换,在单位时间内能获得更多汽化热,使冷风机降温效率更高的优点。 相似文献
20.
Q. Wang L. D. Chen X. J. Liu W. D. Yu X. M. Li 《Applied Physics A: Materials Science & Processing》2009,96(3):643-653
Melting, vaporization and resolidification processes of thin gold film irradiated by a femtosecond pulse laser are studied
numerically. The nonequilibrium heat transfer in electrons and lattice is described using a two-temperature model. The solid–liquid
interfacial velocity, as well as elevated melting temperature and depressed solidification temperature, is obtained by considering
the interfacial energy balance and nucleation dynamics. An iterative procedure based on energy balance and gas kinetics law
to track the location of liquid–vapor interface is utilized to obtain the material removal by vaporization. The effect of
surface heat loss by thermal radiation was discussed. The influences of laser fluence and duration on the evaporation process
are studied. Results show that higher laser fluence and shorter laser pulse width lead to higher interfacial temperature,
deeper melting and ablation depths. 相似文献