A method of relaying the transverse profile of a laser beam and its application to holography

The holography of engineering plant where only restricted access is available requires a method of piping the pulsed laser beam to a compact, remote head. Because amplifier distortions which occur in pulsed lasers result in far field beam break-up, it is not possible to simply collimate the beam as normally possible with a continuous wave laser. A possible way to transmit the pulsed laser beam is by an optical relay which repeatedly images the output until the launching point is reached.

The use of a relay system to transmit the pulsed laser output 20 m has been demonstrated in the laboratory. Holograms taken at the output of the relay showed a resolution of 18l.p. mm^-1, the same as that achieved when a hologram was taken by expanding the beam immediately at the laser output.     

Splitting algorithm for DMT optimal cooperative MAC protocols in wireless mesh networks

A cooperative protocol for wireless mesh networks is proposed in this paper. The protocol implements both on-demand relaying and a selection of the best relay terminal so only one terminal is relaying the source message when cooperation is needed. Two additional features are also proposed. The best relay is selected with a splitting algorithm. This approach allows fast relay selection within less than three time-slots, on average. Moreover, a pre-selection of relay candidates is performed prior to the splitting algorithm. Only terminals that are able to improve the direct path are pre-selected. So efficient cooperation is now guaranteed. We prove that this approach is optimal in terms of diversity-multiplexing trade-off. The protocol has been designed in the context of Nakagami-m fading channels. Simulation results show that the performance of the splitting algorithm does not depend on channel statistics.     

Relay propagation of partially coherent flattened Gaussian beam in turbulent atmosphere

Relay propagation of partially coherent flattened Gaussian–Schell beam in turbulent atmosphere has been studied. The analytical expresses of average intensity distribution at target are derived. The effects of spatial correlation length of initial and relay beam on the average intensity are analyzed in details. Study shows that the effects of the variation of spatial correlation length of relay beam are much larger than that of initial beam. The effects of spatial correlation length on relay propagation become smaller and smaller with the increase of structure constant. When the spatial correlation length is large and turbulence is strong, the effects of the variation of spatial correlation length on relay propagation are so small that can be neglected.     

Comparison between relay propagation and direct propagation of Gaussian-Schell-model beam in turbulent atmosphere along a slant path

The relay propagation of Gaussian-Schell-model in turbulent atmosphere along a slant path is studied in this paper. Based on the extended Huygens-Fresnel principle and a quadratic approximation, an analytical formula of average intensity for Gaussian-Schell-model beams in turbulent atmosphere along a slant path is derived, and some special cases are discussed. From the study and the comparison with the direct propagation, we can see that the relay propagation has an advantage over the direct propagation. When the altitude of the target is low, the peak intensity of relay propagation is much larger than that of direct propagation. However, because of the limitation of the relay system aperture for relay propagation and the variation of coherence length for direct propagation, the difference in peak intensity between the two propagations decreases with the increase of the target altitude.     

Light Pipe Line Beam Shaper

A light pipe based laser beam shaper is proposed as a low loss approach to transfer a Gaussian laser beam into a long line beam with uniform distribution along the line direction for the applications of illumination or material processing. A telecentric relay optics has been used for solving the radiometric issues in the wide angle optics. In addition, the length of the light pipe is used as a parameter for manipulating irradiance distribution at the outlet to compensate for the non-uniformity resulting from the partial reflection at the optical interface in the relay optics, so as to achieve a highly uniform line beam at the target plane. The proposed scheme provides an economical and versatile solution for the wide angle beam shaping problem.     

用于微电子硅芯片液晶显示的反射式中继目视系统

设计了用对角为 18mm的微电子硅芯片液晶显示器、6 0°视场角的反射中继头盔显示系统。该系统由一个常用的艾尔弗 (Erfle)接目镜和一个反射中继镜组成。反射中继镜和接目镜的场曲异号 ,因此相互部分抵消 ,系统具有较小的场曲和像散。中继系统的采用 ,不仅保证了头盔显示的特定规格要求 ,诸如出瞳直径和出瞳距离 ,而且为反射式微电子硅芯片液晶显示器的照明光源提供了空间。该系统像差较小 ,尺寸和重量合理 ,适用于特定用途的头盔显示     

基于通用模块化的大型空间飞行器地面供配电系统设计

地面供配电系统一直存在体积过于庞大、系统通用性稳定性差问题。基于通用模块化的设计方案,从基本功能实现模块的角度,将系统划分为功率继电器模块、信号继电器模块、PXI控制模块、地面电缆模块、软件实现模块等,通过对这些模块的通用性设计及部分软硬件功能的整合,实现了减少系统体积规模、加大系统集成化及小型化程度、提高系统间通用性及鲁棒性的目的。     

Delay optimization and energy balancing algorithm for improving network lifetime in fixed wireless sensor networks

Since wireless in terms of energy-restricted processes, dispersion radii, processing power limitations, buffers, bandwidth-limited connections, active network topologies, and network stream of traffic outlines, sensor networks provide difficult design issues. The number of hops and latency are decreased if there is a relay mote because it interacts directly with relay motes that are closer to the destination mote. The tremendous intensive research in the area of Wireless Sensor Networks (WSN) has gained a lot of significance among the technical community and research. The job of WSN is to sense the data using sensor motes, pass on the data to the destination detection mote which is associated with a processing center and can be used in multiple spans of Internet of Things (IoT) applications. Wireless sensor network has a set of sensor motes. By making use of sensor mote placement strategy all the sensor motes are spread in an area with each mote having its own exceptional location. Internet of things applications are delay sensitive those applications have a challenge of forming the complete path at a lower delay constraint. The proposal is to modify the game theory energy balancing algorithm by making use of relay motes so that overall network lifetime is increased. It has been proved that modified GTEB is better with respect to existing algorithms in terms of delay, figure of hops, energy depletion, figure of alive motes, figure of dead motes, lifespan ratio, routing overhead and throughput.     

Experimental study on beam shaping in a reduced-scale relay mirror system

Improving power coupling efficiency of beam uplink propagation in a relay mirror system is under extensive research in recent years. A typical model of the relay mirror system is established and theory of beam shaping used to improve power coupling efficiency of the relay mirror system is analyzed in detail. A reduced-scale experimental relay mirror system is founded, which has the same Fresnel number as uplink propagation in the relay mirror system with 1.0 m-caliber transmitter and 30?km propagation distance. Phase distribution of the source is optimized by using the stochastic parallel gradient descent algorithm. The experimental results showed that power coupling efficiency of uplink propagation in the reduced-scale relay mirror system was improved from 72.67 to 87.88 % by beam shaping and the bucket power proportion in 5 pixels at the target was improved from 45.49 to 52.78 %.     

一种面向中继协作频谱感知系统的自适应全局最优化算法

该文研究了冗余中继, 次用户及中继用户数目, 检测门限, 信道传输错误率等因素对中继协作频谱感知系统性能的影响, 并提出一种新的自适应全局最优化算法.该算法基于获得最大无干扰功率的自适应中继选择方法, 确定备选认知中继集合;单个次用户以信道传输错误率最小为准则, 从备选认知中继集合中自适应选择最佳中继, 使总体检测率最大;在给定目标检测率的条件下, 以系统吞吐量最大为准则, 给出了自适应全局最优化算法.仿真实验结果表明新算法信道传输精度高, 信道吞吐量大, 节约带宽资源.