First principle study of SrTiO3 (0 0 1) surface and adsorption of NO on SrTiO3 (0 0 1)

The results of first-principles calculations about the two possible terminations of (0 0 1) surface of SrTiO₃ perovskite and adsorption of NO on SrTiO₃ (0 0 1) surface were presented. Both surface parameters (atomic structures and electronic configurations) and adsorption parameters (bond, energy and charge) of NO on SrTiO₃ (0 0 1) surface, which have never been investigated before as far as we know were investigated using density functional theory calculations with the local-density approximation (DFT-LDA). It was found that the two possible terminations of SrTiO₃ (0 0 1) surface have large surface relaxation, which leads to surface polarization and exhibits different reactivity toward the dissociative adsorption of NO. The electronic states of TiO₂-terminated surface have larger difference than that of bulk, so it is more favorable for adsorption of NO than SrO-terminated surface.     

Chemical reactions of water molecules on Ru(0 0 0 1) induced by selective excitation of vibrational modes

Tunneling electrons in a scanning tunneling microscope were used to excite specific vibrational quantum states of adsorbed water and hydroxyl molecules on a Ru(0 0 0 1) surface. The excited molecules relaxed by transfer of energy to lower energy modes, resulting in diffusion, dissociation, desorption, and surface-tip transfer processes. Diffusion of H₂O molecules could be induced by excitation of the O-H stretch vibration mode at 445 meV. Isolated molecules required excitation of one single quantum while molecules bonded to a C atom required at least two quanta. Dissociation of single H₂O molecules into H and OH required electron energies of 1 eV or higher while dissociation of OH required at least 2 eV electrons. In contrast, water molecules forming part of a cluster could be dissociated with electron energies of 0.5 eV.     

A DFT + U description of oxygen vacancies at the TiO2 rutile (1 1 0) surface

Experimental observations indicate that removing bridging oxygen atoms from the TiO₂ rutile (1 1 0) surface produces a localised state approximately 0.7 eV below the conduction band. The corresponding excess electron density is thought to localise on the pair of Ti atoms neighbouring the vacancy; formally giving two Ti³⁺ sites. We consider the electronic structure and geometry of the oxygen deficient TiO₂ rutile (1 1 0) surface using both gradient-corrected density functional theory (GGA DFT) and DFT corrected for on-site Coulomb interactions (GGA + U) to allow a direct comparison of the two methods. We show that GGA fails to predict the experimentally observed electronic structure, in agreement with previous uncorrected DFT calculations on this system. Introducing the +U term encourages localisation of the excess electronic charge, with the qualitative distribution depending on the value of U. For low values of U (?4.0 eV) the charge localises in the sub-surface layers occupied in the GGA solution at arbitrary Ti sites, whereas higher values of U (?4.2 eV) predict strong localisation with the excess electronic charge mainly on the two Ti atoms neighbouring the vacancy. The precise charge distribution for these larger U values is found to differ from that predicted by previous hybrid-DFT calculations.     

Adsorption of water on TiN (1 0 0), (1 1 0) and (1 1 1) surfaces: A first-principles study

We use first-principles density functional theory-based calculations in the analysis of the interaction of H₂O with (1 0 0), (1 1 0) and (1 1 1) surfaces of TiN, and develop understanding in terms of surface energies, polarity of the surface and chemistry of the cation, through comparison with H₂O adsorption on ZrN. While water molecule physisorbs preferentially at Ti site of (1 0 0) and (1 1 1) surfaces, it adsorbs dissociatively on (1 1 0) surface of TiN with binding stronger than almost 1.32 eV/molecule. Our analysis reveals the following general trends: (a) surfaces with higher energies typically lead to stronger adsorption, (b) dissociative adsorption of H₂O necessarily occurs on a charge neutral high energy surface and (c) lower symmetry of the (1 1 0) plane results in many configurations of comparable stability, as opposed to the higher symmetry (1 0 0) and (1 1 1) surfaces, which also consistently explain the results of H₂O adsorption on MgO available in literature. Finally, weaker adsorption of H₂O on TiN than on ZrN can be rationalized in terms of greater chemical stability of Ti arising from its ability to be in mixed valence.     

Band offsets at the epitaxial anatase TiO2/n-SrTiO3(0 0 1) interface

We have used high-energy resolution X-ray photoelectron spectroscopy to measure valence band offsets at the epitaxial anatase TiO₂(0 0 1)/n-SrTiO₃(0 0 1) heterojunction prepared by molecular beam epitaxy. The valence band offsets range between −0.06 ± 0.05 and +0.16 ± 0.05 eV for anatase thicknesses between 1 and 8 monolayers and three different methods of substrate surface preparation, with no systematic dependence on film thickness. The conduction band offset (CBO) varies over a comparable range by virtue of the fact that anatase and SrTiO₃ exhibit the same bandgap (∼3.2 eV). In contrast, density functional theory predicts the VBO to be +0.55 eV. The lack of agreement between theory and experiment suggests that either some unknown factor in the interface structure or composition excluded from the modeling is influencing the band offset, or that density functional theory cannot accurately calculate band offsets in these oxide materials. The small experimental band offsets have important implications for the use of this interface for fundamental investigations of surface photocatalysis. Neither electrons nor holes are likely to become trapped in the substrate and thus be unable to participate in surface photocatalytic processes.     

First-principles study of the (0 0 1) surface of cubic SrZrO3

Density functional calculations have been used to investigate the (0 0 1) surface of cubic SrZrO₃ with both SrO and ZrO₂ termination. Surface structure and electronic structure have been obtained. The SrO surface is found to be similar to its counterpart in SrTiO₃, while there are marked differences between the ZrO₂ and TiO₂ terminations in SrZrO₃ and SrTiO₃, respectively, concerning surface relaxation and rumpling. For the ZrO₂-terminated surface of SrZrO₃, the covalency of the interaction between the outmost Zr and the O beneath is enhanced as a result of their bond contraction. The band gap reduction and the presence of the surface states are also discussed in relation with the behavior of the electrostatic potential.     

Modification of the electronic properties of the TiO2 (1 1 0) surface upon deposition of the ultrathin conjugated organic layers

A few nm thick 3,4,9,10-perylenetetracarboxylic acid dianhydride (PTCDA) and Cu-phthalocyanine (CuPc) overlayers were thermally deposited in situ in UHV onto TiO₂ (1 1 0) surface. Atomic composition of the surfaces under study was monitored using Auger electron spectroscopy (AES). The formation of the interfacial potential barrier and the structure of the unoccupied electronic states located 5-25 eV above the Fermi level (E_F) was monitored using a probing beam of low-energy electrons according to the total current electron spectroscopy (TCS) method. The work function values upon the overlayer deposition changed from 4.6 to 4.9 eV at the PTCDA/TiO₂ (1 1 0) interface and from 4.6 to 4.3 eV at the CuPc/TiO₂ (1 1 0) interface. Band bending in the TiO₂ substrate, molecular polarization in the organic film and changes in the work function due to the change in the surface composition were found to contribute to the formation of the interfacial potential barriers. Oxygen admixture related peaks were observed in the AES and in the TCS spectra of the CuPc overlayers. A mechanism of the transformations in the PTCDA and CuPc overlayers on the TiO₂ (1 1 0) upon elevating temperature from 25 to 400 °C was suggested.     

High resolution scanning tunneling spectroscopy of ultrathin Pb on Si(1 1 1)-(6 × 6) substrate

The electronic structure of Si(1 1 1)-(6 × 6)Au surface covered with submonolayer amount of Pb is investigated using scanning tunneling spectroscopy. Already in small islands of Pb with thickness of 1 ML Pb_(1 1 1) and with the diameter of only about 2 nm we detected the quantized electronic state with energy 0.55 eV below the Fermi level. Similarly, the I(V) characteristics made for the Si(1 1 1)-(6 × 6)Au surface reveal a localized energy state 0.3 eV below the Fermi level. These energies result from fitting of the theoretical curves to the experimental data. The calculations are based on tight binding Hubbard model. The theoretical calculations clearly show prominent modification of the I(V) curve due to variation of electronic and topographic properties of the STM tip apex.     

Formation of oxygen vacancies on the TiO2(1 1 0) surfaces

Density functional theory was employed to investigate the formation and properties of the oxygen vacancies on the rutile TiO₂(1 1 0) surface. It is found that the formation of the positively charged bridging-oxygen vacancy (BOV⁺, 4.2 eV) is the most favored one, followed by the positively charged in-plane-oxygen vacancy (POV⁺, 4.5 eV). In contrast, the formation of the neutral bridging-oxygen and in-plane-oxygen vacancies (BOV and POV), and their dication oxygen vacancies (BOV²⁺ and POV²⁺) needs much higher energies (7.9 and 8.3 vs. 8.1 and 8.6 eV), respectively.     

DFT study of Pt adsorption on low index SrTiO3 surfaces: SrTiO3(1 0 0), SrTiO3(1 1 1) and SrTiO3(1 1 0)

Density Functional Theory has been used to determine the energetically preferred structures of submonolayer, monolayer, and multilayer Pt films on both ideal terminations of SrTiO₃(1 0 0), SrTiO₃(1 1 1), and SrTiO₃(1 1 0). The strength of the resulting metal/metal oxide interfaces was characterized by the adsorption energy of the film and the film’s work of separation. The two polar surfaces, SrTiO₃(1 1 1) and SrTiO₃(1 1 0), form significantly stronger interfaces than the non-polar SrTiO₃(1 0 0) surface. Approximate criteria were applied to predict the growth mode of Pt on each surface.     

A study of the interaction between perylene and the TiO2(1 1 0)-(1 × 1) surface-based on XPS, UPS and NEXAFS measurements

The interaction between a semi-large aromatic hydrocarbon compound (perylene) and the TiO₂(1 1 0)-(1 × 1) surface under ultra high vacuum conditions has been probed by X-ray photoemission spectroscopy (XPS), ultraviolet photoemission spectroscopy (UPS) and near-edge X-ray absorption fine structure (NEXAFS) methods. UPS measurements of the adsorbate system have been compared with an experimental UPS spectrum of perylene in the gas phase and a calculated spectrum obtained by means of density functional theory (DFT) methods. NEXAFS results of perylene molecules adsorbed on TiO₂(1 1 0)-(1 × 1) were compared with data from an α-phase perylene single crystal. A novel analysis of the valence data has been employed to show that no strong chemical interaction takes place between perylene and the TiO₂(1 1 0)-(1 × 1) surface. Furthermore, angle-dependent NEXAFS measurements and the growth curve results suggest that the perylene molecules are oriented flat down onto the TiO₂ substrate due to weak van der Waals interactions.     

The 2 × 1 reconstruction of the rutile TiO2(0 1 1) surface: A combined density functional theory, X-ray diffraction, and scanning tunneling microscopy study

An extensive search for possible structural models of the (2 × 1)-reconstructed rutile TiO₂(0 1 1) surface was carried out by means of density functional theory (DFT) calculations. A number of models were identified that have much lower surface energies than the previously-proposed ‘titanyl’ and ‘microfaceting’ models. These new structures were tested with surface X-ray diffraction (SXRD) and voltage-dependent STM measurements. The model that is (by far) energetically most stable shows also the best agreement with SXRD data. Calculated STM images agree with the experimental ones for appropriate tunneling conditions. In contrast to previously-proposed models, this structure is not of missing-row type; because of its similarity to the fully optimized brookite TiO₂(0 0 1) surface, we call it the ‘brookite (0 0 1)-like’ model. The new surface structure exhibits two different types of undercoordinated oxygen and titanium atoms, and is, in its stoichiometric form, predicted to be rather inert towards the adsorption of probe molecules.     

SrTiO3(0 0 1) reconstructions: the (2 × 2) to c(4 × 4) transition

Scanning tunneling microscopy (STM) is used to investigate the (0 0 1) surface structure of Nb doped SrTiO₃ single crystals annealed in ultra high vacuum (UHV). Atomically resolved images of the (2 × 2) reconstructed surface are obtained after annealing a chemically etched sample. With further annealing dotted row domains appear, which coexist with the (2 × 2) reconstruction. The expansion of these domains with further annealing gives rise to the formation of a TiO₂ enriched c(4 × 4) reconstruction.     

Adsorption and reactions of HN3 on Si(1 0 0)-2 × 1: A computational study

We have studied the adsorption and decomposition of HN₃ on Si(1 0 0)-2 × 1 surface using the hybrid density functional B3LYP method and effective core potential basis, LanL2DZ, with Si₁₅H₁₆ as a double dimer surface model for cluster calculations. The result shows that the barriers for the dissociative adsorption of HN₃ forming HN(a) + N₂(g) are quite low by stepwise dissociation processes occurring either on a dimer or across the dimers. The low activation energies are consistent with previous experimental observations that the molecularly adsorbed HN₃(a) can undergo decomposition producing HN(a) at low surface temperatures. On the other hand, the predicted activation energies for the N₃(a) + H(a) formation processes are all relatively higher. These results also explain the absence of the N₃(a) species in HREELS measurements following each annealing experiment. Several selected reaction paths were also confirmed with slab model calculations using an optimization approach coupling the energy and gradient calculations by the slab model with the geometrical optimization using Berny algorithm.In addition, the adsorbate effect was examined for the end-on and side-on molecular configurations. For the side-on adsorption configuration, all possible combinations with 1-4 adsorbates can exist on the four surface Si sites of the double dimers, with adsorption energies lying closely to the multiples of that of a single side-on adsorbate (LM2); i.e., adsorption energies are nearly additive. Interestingly, for the end-on adsorption, only 1 and 2 HN₃ molecules can adsorb on a dimer due to the presence of the negative charges on the remaining Si sites in the neighboring dimer. For the two end-on adsorbates on the same dimer, the total adsorption energy is close to two times that of HN₃(a) or LM1. For the mixed end-on/side-on configurations, only one of each type can co-exist on a single dimer pair (Si₁-Si₂ or Si₃-Si₄) sites with adsorption energy close to the sum of those of one end-on and one side-on adsorbate. Finally, the predicted reaction routes and vibrational frequencies showed good agreement with previous experimental results. The stabilities of many ad-species involved in these reactions with end-on and/or side-on configurations have been predicted together with the transition states connecting those species.     

First principle calculations of benzotriazole adsorption onto clean Cu(1 1 1)

The adsorption of benzotriazole (BTAH or C₆N₃H₅) on a Cu(1 1 1) surface is investigated by using first principle density functional theory calculations (VASP). It is found that BTAH can be physisorbed (<0.1 eV) or weakly chemisorbed (∼0.43 eV) onto Cu(1 1 1), and the chemical bond is formed through nitrogen sp² lone pairs. The weak chemisorption can be stabilized by reaction with neighboring protonphilic radicals, like OH⁻. Furthermore, the geometries and associated energies of intermolecular hydrogen bonds between adsorbates on Cu(1 1 1) are also calculated. A model of the first layer of BTAH/BTA⁻ on Cu(1 1 1) surface is developed based on a hydrogen bond network structure.     

The chemisorption of pentacene on Si(0 0 1)-2 × 1

Adsorption structures of the pentacene (C₂₂H₁₄) molecule on the clean Si(0 0 1)-2 × 1 surface were investigated by scanning tunneling microscopy (STM) in conjunction with density functional theory calculations and STM image simulations. The pentacene molecules were found to adsorb on four major sites and four minor sites. The adsorption structures of the pentacene molecules at the four major sites were determined by comparison between the experimental and the simulated STM images. Three out of the four theoretically identified adsorption structures are different from the previously proposed adsorption structures. They involve six to eight Si-C covalent chemical bonds. The adsorption energies of the major four structures are calculated to be in the range 67-128 kcal/mol. It was also found that the pentacene molecule hardly hopped on the surface when applying pulse bias voltages on the molecule, but was mostly decomposed.     

The growth and structure of titanium dioxide films on a Re(1 0 −1 0) surface: Rutile(0 1 1)-(2 × 1)

Titanium dioxide films were grown on Re(1 0 −1 0) by Ti vapor deposition in oxygen at T = 830 K and studied by means of low-energy electron diffraction (LEED), X-ray photoelectron spectroscopy (XPS), low-energy ion scattering (LEIS) and X-ray diffraction (XRD). The Ti oxide stoichiometry was determined by XPS as Ti:O = 1:2, with the Ti oxidation state (4+). The TiO₂ growth was monitored by means of LEED as a function of film thickness. Extending the coverage from the submonolayer into the multilayer regime gives rise to a p(2 × 2) pattern, a (poorly ordered) (1 × 1), and, finally, a stable (2 × 2) structure, the latter being associated with a homogeneous TiO₂ phase. For normal electron incidence, the (2 × 2) LEED pattern exhibits systematically extinguished beams at (n ± 1/2, 0) positions, indicating a glide mirror plane. The pg(2 × 2) structure could be explained by both a rutile(0 1 1)-(2 × 1) reconstructed surface and a bulk truncated brookite(0 0 1) surface. Faceting phenomena, i.e. running LEED spots, observed with thin TiO₂ films point to the formation of a rutile(0 1 1)-(2 × 1) surface with two domains and {0 1 1}-(2 × 1) facets and rule out the brookite alternative. Confirmation of this assignment was obtained by an XRD analysis performed at the Berlin synchrotron facility BESSY.     

Theoretical study of CO adsorption on the illuminated TiO2 (0 0 1) surface

A quantum modeling of the CO adsorption on illuminated anatase TiO₂ (0 0 1) is presented. The calculated adsorption energy and geometries of illuminated case are compared with the ground state case. The calculations were achieved by using DFT formalism and the BH and HLYP. Upon photoexcitation, an electron-hole pair is generated. Comparing of natural population in the ground state and the exited state, shows that an electron is trapped in a Ti⁴⁺ ion and a hole is localized in an oxygen ion. The photoelectron helps generation of a CO₂ molecule on the TiO₂ surface. As shown by optimization of these systems, the CO molecule adsorbed vertically on the TiO₂ (0 0 1) surface in the ground state case while the CO molecule made an angle of 134.3° to this surface at the excited state case. Based on the here used model the obtained adsorption energy was 0.36 eV which is in excellent agreement with the reported experimental value. In the present work the C-O stretch IR frequencies are calculated which are 1366.53 and 1423.16 cm⁻¹. These results are in good agreement with the earlier reported works for the surface carbonaceous compounds, and oxygenated carbon species.     

Scanning tunnelling microscopy and spectroscopy of the reduced TiO2(1 0 0) surface

Scanning tunnelling microscopy and current imaging tunnelling spectroscopy were used to study the topographic and electronic structure of a reduced TiO₂(1 0 0) surface. The STM results showed that the TiO₂(1 0 0) surface is capable to form (1 × 7) reconstruction which can transform to (1 × 3) reconstruction due to reoxidation of the surface. The CITS results showed that the (1 × 7) reconstruction is much more metallic in compared to the (1 × 3) reconstruction showing pronounced surface states at energy 1.3 eV and 0.8 eV below the Fermi level and at energy 1.0-1.2 eV above the Fermi level.     

Combined investigation of water sorption on TiO2 rutile (1 1 0) single crystal face: XPS vs. periodic DFT

XPS and periodic DFT calculations have been used to investigate water sorption on the TiO₂ rutile (1 1 0) face. Two sets of XPS spectra were collected on the TiO₂ (1 1 0) single crystal clean and previously exposed to water: the first set with photoelectrons collected in a direction parallel to the normal to the surface; and the second set with the sample tilted by 70°, respectively. This tilting procedure promotes the signals from surface species and reveals that the first hydration layer is strongly coordinated to the surface and also that, despite the fact that the spectra were recorded under ultra-high vacuum, water molecules subsist in upper hydration layers. In addition, periodic DFT calculations were performed to investigate the water adsorption process to determine if molecular and/or dissociative adsorption takes place. The first step of the theoretical part was the optimisation of a dry surface model and then the investigation of water adsorption. The calculated molecular water adsorption energies are consistent with previously published experimental data and it appears that even though it is slightly less stable, the dissociative water sorption can also take place. This assumption was considered, in a second step, on a larger surface model where molecular and dissociated water molecules were adsorbed together with different ratio. It was found that, due to hydrogen bonding stabilisation, molecular and dissociated water molecules can coexist on the surface if the ratio of dissociated water molecules is less than ≈33%. These results are consistent with previous experimental works giving a 10-25% range.