Deposition of antibacterial of poly(1,3-bis-(p-carboxyphenoxy propane)-co-(sebacic anhydride)) 20:80/gentamicin sulfate composite coatings by MAPLE

We report on thin film deposition of poly(1,3-bis-(p-carboxyphenoxy propane)-co-sebacic anhydride)) 20:80 thin films containing several gentamicin concentrations by matrix assisted pulsed laser evaporation (MAPLE). A pulsed KrF* excimer laser was used to deposit the polymer-drug composite thin films. Release of gentamicin from these MAPLE-deposited polymer conjugate structures was assessed. Fourier transform infrared spectroscopy was used to demonstrate that the functional groups of the MAPLE-transferred materials were not changed by the deposition process nor were new functional groups formed. Scanning electron microscopy confirmed that MAPLE may be used to fabricate thin films of good morphological quality. The activity of gentamicin-doped films against Escherichia coli and Staphylococcus aureus bacteria was demonstrated using disk diffusion and antibacterial drop test. Our studies indicate that deposition of polymer-drug composite thin films prepared by MAPLE is a suitable technique for performing controlled drug delivery. Antimicrobial thin film coatings have several medical applications, including use for indwelling catheters and implanted medical devices.     

Functional polyethylene glycol derivatives nanostructured thin films synthesized by matrix-assisted pulsed laser evaporation

We report the thin film deposition by matrix-assisted pulsed laser evaporation (MAPLE) of a polymer conjugate with an hydrophilic sequence between metronidazole molecules that was covalently attached to both oligomer ends of carboxylate poly(ethylene glycol) (PEG 1.5-metronidazole). A pulsed KrF* excimer laser was used to deposit the drug-polymer composite films. Fourier transform infrared spectroscopy was used to demonstrate that MAPLE-transferred materials exhibited chemical properties similar to the starting materials. The dependence of the surface morphology on incident laser fluence is given.     

Matrix assisted pulsed laser evaporation processing of triacetate-pullulan polysaccharide thin films for drug delivery systems

We report the first successful deposition of triacetate-pullulan polysaccharide thin films by matrix assisted pulsed laser evaporation. We used a KrF* excimer laser source (λ = 248 nm, τ ≈ 20 ns) operated at a repetition rate of 10 Hz. We demonstrated by FTIR that our thin films are composed of triacetate-pullulan maintaining its chemical structure and functionality. The dependence on incident laser fluence of the induced surface morphology is analysed.     

Matrix assisted pulsed laser evaporation of cinnamate-pullulan and tosylate-pullulan polysaccharide derivative thin films for pharmaceutical applications

We have demonstrated the successful thin film growth of two pullulan derivatives (cinnamate-pullulan and tosylate-pullulan) using matrix assisted pulsed laser evaporation (MAPLE). Our MAPLE system consisted of a KrF* laser, a vacuum chamber, and a rotating target holder cooled with liquid nitrogen. Fused silica and silicon (1 1 1) wafers were used as substrates. The MAPLE-deposited thin films were characterized by transmission spectrometry, profilometry, atomic force microscopy (AFM), Fourier transform infrared (FTIR) spectroscopy and Raman spectroscopy. The deposited layers ranged from 250 nm to 16.5 μm in thickness, depending on the laser fluence (0.065-0.5 J cm⁻²) and number of pulses applied for the deposition of one structure (1500-13,300). Our results confirmed that MAPLE was well-suited for the transfer of cinnamate-pullulan and tosylate-pullulan.     

Matrix assisted pulsed laser evaporation of poly(d,l-lactide) thin films for controlled-release drug systems

We report the successful deposition of the porous polymer poly(d,l-lactide) by matrix assisted pulsed laser evaporation (MAPLE) using a KrF* excimer laser (248 nm, τ = 7 ns) operated at 2 Hz repetition rate. The chemical structure of the starting materials was preserved in the resulting thin films. Fluence played a key role in optimizing our depositions of the polymer. We demonstrated MAPLE was able to improve current approaches to grow high quality thin films of poly(d,l-lactide), including a porosity control highly required in targeted drug delivery.     

Laser processing of poly(methyl methacrylate) Lambertian diffusers

Matrix-assisted pulsed laser deposition was used to deposit poly(methyl methacrylate) on silicon wafers and sodium silicate glass slides for the purpose of making optical diffusers. After deposition, the reflectance of the coated substrates was measured as a function of scattering angle. We found that the angular dependence of the reflectance could be described as the sum of two functions. First, a Gaussian describes the specular reflection of the underlying substrate that has been broadened by passage through the film. Second, a cosine function describes the reflectance contribution from the film itself. We found that by increasing the thickness of the deposited film that we could eliminate the specular reflection to obtain Lambertian diffusers. Since we can control the surface roughness by adjusting the ratio of the two matrices in laser processing, this deposition technique offers the possibility of producing a wide range of diffusers of different types.     

High fluence deposition of polyethylene glycol films at 1064 nm by matrix assisted pulsed laser evaporation (MAPLE)

Matrix assisted pulsed laser evaporation (MAPLE) has been applied for deposition of thin polyethylene glycol (PEG) films with infrared laser light at 1064 nm. We have irradiated frozen targets (of 1 wt.% PEG dissolved in water) and measured the deposition rate in situ with a quartz crystal microbalance. The laser fluence needed to produce PEG films turned out to be unexpectedly high with a threshold of 9 J/cm², and the deposition rate was much lower than that with laser light at 355 nm. Results from matrix assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) analysis demonstrate that the chemistry, molecular weight and polydispersity of the PEG films were identical to the starting material. Studies of the film surface with scanning electron microscopy (SEM) indicate that the Si-substrate is covered by a relatively homogenous PEG film with few bare spots.