Measuring nanopore size from the spin-lattice relaxation of CF4 gas

The NMR 19F spin-lattice relaxation time constant T1 for CF4 gas is dominated by spin-rotation interaction, which is mediated by the molecular collision frequency. When confined to pores of approximately the same size or smaller than the bulk gas mean free path, additional collisions of molecules with the pore walls should substantially change T1. To develop a method for measuring the surface/volume ratio S/V by measuring how T1 changes with confinement, we prepared samples of known S/V from fumed silica of known mass-specific surface area and compressed to varying degrees into cylinders of known volume. We then measured T1 for CF4 in these samples at varying pressures, and developed mathematical models for the change in T1 to fit the data. Even though CF4 has a critical temperature below room temperature, we found that its density in pores was greater than that of the bulk gas and that it was necessary to take this absorption into account. We modeled adsorption in two ways, by assuming that the gas condenses on the pore walls, and by assuming that gas in a region near the wall is denser than the bulk gas because of a simplified attractive potential. Both models suggested the same two-parameter formula, to which we added a third parameter to successfully fit the data and thus achieved a rapid, precise way to measure S/V from the increase in T1 due to confinement in pores.     

Surface relaxation of polarized Xe atoms dissolved in deuterated ethanol

We measured the spin relaxation of polarized xenon atoms dissolved in deuterated ethanol. Surface relaxation was suppressed by coating the cell walls with deuterated eicosane. From the dependence of the decay rate on temperature and static magnetic field, we obtained the correlation time of random fluctuations of the local field at the liquid-solid interface. By varying the cell volume, the wall coating, and the surface area of the eicosane, we measured the contribution of the spin-rotation interaction to the relaxation. The use of both deuterated molecules enables us to distinguish surface relaxation from the magnetic dipole-dipole and spin-rotation interactions in solution.     

Thermal infrared cross-sections of C2F6 at atmospheric temperatures

Spectral absorption cross-sections, k_ν (), have been measured in the 8.0 and bands of C₂F₆. Temperature and total (N₂-broadening) pressure have been varied to represent the conditions specified in various models of the terrestrial atmosphere so that the absorption cross-sections can be applied directly to the optical remote-sensing of C₂F₆ in the atmosphere. The measured absolute intensities of the 8.0 and the bands are (1.636±0.003)×10⁻¹⁶ and (, respectively.     

Theoretical study on the interaction of heptafluoro-iso-butyronitrile decomposition products with Al (1 1 1)

Seeking environmentally friendly gas-insulated medium has become a research hotspot in recent years. At present, C₃F₇CN (Heptafluoro-iso-butyronitrile) is considered to be a potential SF₆ environment-friendly alternative gas and some achievements have been made in the study of its insulation and decomposition characteristics, but there are few reports on the compatibility between its characteristic decomposition products and materials. The investigation of compatibility between gas-insulated medium and material is an important part of evaluating its comprehensive performance. In this paper, we investigated the interaction between C₂F₅CN, CF₃CN, COF₂ and CF₄ with the aluminium widely used in electrical equipment. It was found that the interaction between C₂F₅CN, CF₃CN and Al (1 1 1) surface is strong. There are obvious charge transfer and electron orbital overlap between the C atom, N atom in CN group and Al (1 1 1). The interaction between COF₂, CF₄ and Al (1 1 1) surface is weak and van der Waal’s forces play the major role. Relevant results reveal the characteristics of C₃F₇CN decomposition products and provide theoretical guidance for evaluating the material compatibility between C₃F₇CN decomposition products and aluminium.     

DFT calculation of core– and valence–shell electron excitation and ionization energies of 2,1,3-benzothiadiazole C6H4SN2, 1,3,2,4-benzodithiadiazine C6H4S2N2, and 1,3,5,2,4-benzotrithiadiazepine C6H4S3N2

The vertical core– and valence–shell electron excitation and ionization energies of the three title molecules, 1–3, were calculated by density functional theory (DFT) using adequate functional for each type of processes and atoms under study. The inner shells treated were C1s, N1s, S1s, S2s, S2p. Molecular geometry was optimized by DFT B3LYP/6-311 + (d,p). The basis set of triple zeta plus polarization (TZP) Slater-type orbitals was employed for DFT calculations. The ΔSCF method was used to calculate ionization energies. The average absolute deviation (AAD) from experiment of 26 valence-electron ionization energies calculated by DFT for the three molecules 1–3 was 0.14 eV; while that of 24 calculated core-electron binding energies (CEBEs) from experiment was 0.4 eV. Selected core excitation energies were calculated by the multiplet approximation for the three molecules. The AAD of twelve calculated core excitation energies by the multiplet approximation that exclude S2s cases was 0.56 eV. Time-dependent DFT (TDDFT) was employed to calculate the excitation energies and corresponding oscillator strengths of core- and valence-electrons of the molecules. Some selected occupied core orbitals were used to calculate the core-excitation energies with the TDDFT (Sterner–Frozoni–Simone scheme). The core excitation energies thus calculated were in an average error of ca. 28 eV compared to observed values. They were shifted to the value calculated by the multiplet approximation. Convoluted spectra based upon the shifted energies and accompanying oscillator strengths reproduce low-energy region of observed spectra reasonably well, whereas they deviate from experiment in high-energy region. Reasonable agreement between theory and experiment was obtained for the valence electron excitations of the molecules.     

Fourier Transform Infrared Study of A C18 Modified Quartz Surface

In reversed-phase liquid chromatography the separation mechanism depends on the solute-stationary phase and solute-solvent interactions. These interactions can be studied under near-normal chromatographic conditions by total internal reflection fluorescence (TIRF) spectroscopy. Quartz crystals chemically modified with n-octadecyl-substituted-silanes, which are common derivatizing reagents used to modify chromatographic surfaces, can be used as a model stationary phase in TIRF studies. To facilitate study of the separation mechanisms using TIRF, surfaces of quartz crystals were chemically modified with silylating reagents and characterized by Fourier Transform Infrared Spectroscopy (FT-IR). Susceptibility tests of the modified surfaces were performed using protic and aprotic solvents. Siloxane bonds were formed, between the reagent and the quartz surface, at high reaction temperature in the absence of any solvent. Siloxane bond formation in the presence of organic solvent at room temperature was observed only when the crystal was previously dehydrated at high temperature.     

MC20F20（M=Li，Na，Be和Mg）几何结构和电子性质的密度泛函计算研究

采用密度泛函理论（density functional theory, DFT）中的广义梯度近似（generalized gradient approximation, GGA）对MC₂₀F₂₀（M=Li,Na,Be和Mg）的几何结构和电子性质进行了计算研究.几何结构研发现：随着内掺原子序数的增加,金属原子M对C₂₀F₂₀中的C—C键的影响越来越大,而对C—F键的影响甚微.掺杂能计算表明：MC₂₀F₂₀的掺杂能均为负值,需要在一定的实验条件下才能被合成.内掺碱金属和碱土金属分别产生了两类截然不同的能隙和磁性.其中,内掺碱金属的能隙非常小,且带有1μ_B的净磁矩,表现出磁性;而内掺碱土金属的能隙比C₆₀的能隙还大,净自旋为0,表现出非磁性. 关键词： 富勒烯 几何结构 电子结构 密度泛函     

BC5力学性质的第一性原理计算

采用平面波赝势密度泛函理论方法对0—60 GPa静水压下BC₅ 六角晶系P3m1和四方晶系I4m2结构的平衡态晶格常数、弹性常数、各向异性以及泊松比与Cauchy扰动进行了研究. 研究结果表明, BC₅的两种结构在高压下是稳定的, 且不可压缩性随着压强的增加而增大. 另外, 对其电子结构也进行了计算, 计算结果表明, BC₅存在一个较宽的带隙, 两种原子间有较强的共价杂化, 材料的性质主要由B的2p¹和C的2p²态电子共同决定. 压强对材料带隙和费米能级附近的态密度几乎没有影响, 只引起微小的漂移, 可推断其很好的高压稳定性.     

Infrared investigation of benzene to 30 GPa transformation to a polymer

Abstract

After a pressure cycle to 30 GPa, benzene transforms to a white solid which can be recovered at ambient. Results obtained from infrared spectroscopy and other physico-chemical methods show that the recovered solid is a highly cross-linked polymer. The molecular structure of benzene is very likely completely altered by the transformation.     

Integral Representation of the Linear Boltzmann Operator for Granular Gas Dynamics with Applications

We investigate the properties of the collision operator Q associated to the linear Boltzmann equation for dissipative hard-spheres arising in granular gas dynamics. We establish that, as in the case of non-dissipative interactions, the gain collision operator is an integral operator whose kernel is made explicit. One deduces from this result a complete picture of the spectrum of Q in an Hilbert space setting, generalizing results from T. Carleman (Publications Scientifiques de l’Institut Mittag-Leffler, vol. 2, 1957) to granular gases. In the same way, we obtain from this integral representation of Q ⁺ that the semigroup in L ¹(ℝ³×ℝ³,dx ⊗ dv) associated to the linear Boltzmann equation for dissipative hard spheres is honest generalizing known results from Arlotti (Acta Appl. Math. 23:129–144, 1991).     

Hydration water dynamics in biopolymers from NMR relaxation in the rotating frame

Assuming dipole-dipole interaction as the dominant relaxation mechanism of protons of water molecules adsorbed onto macromolecule (biopolymer) surfaces we have been able to model the dependences of relaxation rates on temperature and frequency. For adsorbed water molecules the correlation times are of the order of 10(-5)s, for which the dispersion region of spin-lattice relaxation rates in the rotating frame R(1)(ρ)=1/T(1)(ρ) appears over a range of easily accessible B(1) values. Measurements of T(1)(ρ) at constant temperature and different B(1) values then give the "dispersion profiles" for biopolymers. Fitting a theoretical relaxation model to these profiles allows for the estimation of correlation times. This way of obtaining the correlation time is easier and faster than approaches involving measurements of the temperature dependence of R(1)=1/T(1). The T(1)(ρ) dispersion approach, as a tool for molecular dynamics study, has been demonstrated for several hydrated biopolymer systems including crystalline cellulose, starch of different origins (potato, corn, oat, wheat), paper (modern, old) and lyophilized proteins (albumin, lysozyme).     

Two-dimensional NMR correlation experiments in the gas phase

The application of common two-dimensional NMR correlation experiments to gaseous analytes for structural elucidation is reported. Standard sequences such as COSY, HSQC, and HMBC are readily applied to volatile hydrocarbons and fluorocarbons. In experiments using (19)F or (13)C as the observed nucleus, it is possible to take advantage of efficient spin-rotation relaxation to perform common experiments swiftly (a (19)F COSY acquired in 6s is shown) or to render insensitive experiments possible on a practical timescale (e.g. a gas phase INADEQUATE at natural isotopic abundance in 14h). NOE-based experiments were not successful on the gaseous systems studied.     

Magnetic trapping of silver and copper, and anomalous spin relaxation in the ag-he system

We have trapped large numbers of copper (Cu) and silver (Ag) atoms using buffer-gas cooling. Up to 3 x 10{12} Cu atoms and 4 x 10{13} Ag atoms are trapped. Lifetimes are as long as 5 s, limited by collisions with the buffer gas. Ratios of elastic to inelastic collision rates with He are >or=10{6}, suggesting Cu and Ag are favorable for use in ultracold applications. The temperature dependence of the Ag-3He collision rate varies as T;{5.8+/-0.4}. We find that this temperature dependence is inconsistent with the behavior predicted for relaxation arising from the spin-rotation interaction, and conclude that the Ag-3He system displays anomalous collisional behavior in the multiple-partial wave regime. Gold (Au) was ablated into 3He buffer gas, however, atomic Au lifetimes were observed to be too short to permit trapping.     

Zr催化剂对NaAlH4和Na3AlH6可逆储氢性能的影响

采用基于密度泛函理论的平面波赝势方法,分别计算纯净的以及掺杂Zr的NaAlH₄和Na₃AlH₆的晶格结构常数、能量、电子局域函数和电子态密度.结果表明：NaAlH₄和Na₃AlH₆分别是带隙为46和31 eV的绝缘体;NaAlH₄和Na₃AlH₆中Al—H键是共价键,Na—H键是离子键;Zr原子替代Na原子 关键词： 储氢 4')" href="#">NaAlH₄ 3AlH₆')" href="#">Na₃AlH₆ Zr掺杂     

使用发射光谱对H2稀释情况下的感应耦合H2/C4F8等离子体中碳氟基团的研究

在射频输入功率为400W，气压为0.8Pa的条件下，使用光强标定的发射光谱方法研究了感应耦合H₂/C₄F₈等离子体中CF, CF₂, H和F基团的相对密度随流量比R=H₂/(H₂+C₄F₈)的变化情况，而HF基团相对密度的变化由四级质谱仪探测得到。结果表明等离子体活性先随着R的增加而升高，然后随着R的进一步增加而下降。在流量比从0逐渐上升到0.625的过程中，CF和CF₂基团的相对密度不断降低。实验中测得的CF基团的相对密度[CF]与理论计算得到的[CF]有很好的一致性说明了电子与CF2基团的碰撞反应是CF基团产生的主要原因。文中还讨论了HF基团。     

A theoretical study on the kinetics of multichannel Multiwell reaction of H2S(1A1) with HO2(2A′′)

The mechanism and kinetics of the reaction of hydrogen sulphide (H₂S(¹A₁)) with hydroperoxyl radical (HO₂(²A″)) on the lowest doublet potential energy surface have been theoretically studied. The potential energy surface for possible pathways has been investigated by employing Complete Basis Set (CBS), DFT, and CCSD(T) methods. Three possible pathways are suggested for the title reaction. The most probable entrance channel consists of formation of a hydrogen-bonded pre-reaction complex (vdw1) and two energised intermediates. Multichannel RRKM-Steady State Approximation and CVT calculations have been carried out to compute the rate constants over a broad range of temperature from 200?K to 3000?K to cover the atmospheric and combustion conditions and pressure from 0.1 to 2000?Torr. No sign of pressure dependence was observed for the title reaction over the stated range of pressure. We have shown that the major products of the title reaction are H₂O₂ and SH while at higher temperatures, formation of the other products such as H₂O, HOS, HSOH and OH are feasible, too. Our calculated overall rate constant is in agreement with the reported experimental data in the literature.     

钶铁矿型MnNb2O6的熔盐法合成、钒掺杂与磁性研究

采用了熔盐法新工艺制备了纯相与掺钒的MnNb₂O₆粉晶,利用X射线衍射仪(XRD),扫描电子显微镜(SEM),能谱分析(EDX),透射电子显微镜(TEM)、高分辨透射电镜(HRTEM)和电子衍射(SAED)分析了其物相、形貌及微结构.结果表明合成产物为正交晶系钶铁矿型MnNb₂O₆;在不同的熔盐中合成出了棒状、片状与长方体形貌的纯相产物.讨论了温度与掺杂对结构与形貌的影响,HRTEM与SAED分析表明了产物的各向异性生 关键词： 熔盐法 结构与形貌 掺杂 反铁磁性     

On the isotope effect of Tc in squaric acid (H2C4O4)

The phase transition mechanism in squaric acid is reviewed from the viewpoint of the pressure dependence of the O—H—O bond length (2R). The two-dimensional pressure effect on T_c is extracted from the hydrostatic pressure behaviour by taking account of the uniaxial stress applied perpendicular to the layer planes. The result shows that if 2R(H₂SQ) is stretched to 2R(D₂SQ) the phase transition temperature 7^H _c of H₂SQ coincides with T^D _c of D₂SQ. This result supports the suggestion that the phase transition mechanism is of the order-disorder type.     

Elastic and thermodynamic properties of CaB6 under pressure from first principles

The elastic and thermodynamic properties of CsCl-type structure CaB₆ under high pressure are investigated by first-principles calculations based on plane-wave pseudopotential density functional theory method within the generalized gradient approximation (GGA). The calculated lattice parameters of CaB₆ under zero pressure and zero temperature are in good agreement with the existing experimental data and other theoretical data. The pressure dependences of the elastic constants, bulk modulus B (GPa), and its pressure derivative B′, shear modulus G, Young's modulus E, elastic Debye temperature Θ_B, Zener's anisotropy parameter A, Poisson ratios σ, and Kleinmann parameter ζ are also presented. An analysis for the calculated elastic constants has been made to reveal the mechanical stability of CaB₆ up to 100 GPa. The thermodynamic properties of the CsCl-type structure CaB₆ are predicted using the quasi-harmonic Debye model. The pressure-volume-temperature (P-V-T) relationship, the variations of the heat capacity C_V, Debye temperature Θ_D, and the thermal expansion α with pressure P and temperature T, as well as the Grüneisen parameters γ are obtained systematically in the ranges of 0-100 GPa and 0-2000 K.     

转动传能中NH2()精细结构态变化的研究

利用高分辨光谱技术他NH2（A~2A1,090)423(F1/F2) 在单次碰撞条件下的精细态色散光光谱,发现NH2（A~2A1)在与团壳层分子碰撞传能过程中,母能级的自旋－转动耦合守恒,从实验上直接证实了在开壳层－ 壳层分子碰撞过程中电子自旋为一旁观者的假设;由于长程作用力造成子能级有保持原来自旋－转动耦合的倾向。