首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 140 毫秒
1.
 高功率二极管阵列泵浦固体激光系统的核心在于泵浦耦合技术,泵浦耦合直接决定了系统的成本、增益能力、增益均匀性、泵浦引发动态波前畸变和泵浦引发动态光束漂移等关键问题。通过对用于高功率二极管列阵泵浦固体激光系统泵浦耦合优化设计的3维光线追迹方法的研究,从二极管发光远场属性出发,建立其理论计算模型,对高功率激光二极管阵列端面泵浦大口径放大器的一种新型耦合方式——二极管列阵拟球面排列、空心镀银导管耦合进行了优化设计,并开展了泵浦耦合效率、泵浦场均匀性、泵浦场传输性等实验研究,实现了72%耦合效率、5 mm内80%传输效率的均匀平顶泵浦耦合场输出,理论计算与实验结果符合较好。  相似文献   

2.
贾选军 《应用光学》1991,12(1):32-34,20
本文用速率方程分析了泵浦光源中激光波长辐射对激光介质激发态粒子数积累和激光器阀值的影响情况。实验表明,只要滤掉泵浦光源中激光波长辐射,单脉冲效率就可提高20%,且激光器的阀值保持不变。  相似文献   

3.
沈小华  周复正 《光学学报》1995,15(6):97-802
提出了半导体激光泵浦光束在固体增益介质内的加权平均半径是影响泵浦效率的主要参数;分析了泵浦光束尺寸、椭圆率与斜率效率和阈值的关系。从分析模式匹配理论出发,提出了光学耦合系统的设计和调整应满足的条件,最后对棱镜扩束耦合系统进行了详细计算和简单的实验研究。  相似文献   

4.
双端泵浦保偏光纤激光器   总被引:1,自引:1,他引:0       下载免费PDF全文
 以两台808 nm半导体激光器LD1和LD2为泵浦源,对光纤激光器双端泵浦进行了研究,获得了6.5 W的激光输出。实验分别测出了LD1和LD2半导体激光器单端泵浦和双端泵浦时的输出功率,对双端泵浦输出功率与单端泵浦功率之和进行了比较,利用双端泵浦提高了泵浦效率和输出激光功率。同时测量了输出激光的偏振度,通过计算得到双端泵浦输出激光的偏振度为0.5。  相似文献   

5.
LD端面泵浦Nd:YLF激光放大器研究   总被引:6,自引:3,他引:3       下载免费PDF全文
 描述了对高功率LD端面泵浦Nd:YLF激光放大器的研究。放大器的耦合结构采用微透镜对泵浦光进行准直,透镜导管(Lensduct)对其汇聚,耦合效率达72.2%。用该放大器构成的振荡器的斜效率为35.9%。该激光放大器的口径为Φ 10mm,在1053nm处具有2.66的小信号增益。  相似文献   

6.
在 TRIM软件计算结果的基础上利用蒙卡方法编制了能量沉积效率与损失率的 EDL计算软件 ,模拟计算了泵浦腔尺寸、混合气体中 3 He分压等参数与能量沉积密度之间的关系 ,研究了反应堆核泵浦激光腔内的能量沉积问题 ,推导出了能量沉积密度的函数关系式。  相似文献   

7.
在TRIM软件计算结果的基础上利用蒙卡方法编制了能量沉积效率与损失率的EDL计算软件,模拟了计算了泵浦腔尺寸、混合气体中^3He分压等参数与能量沉积密度之间的关系,研究了反应堆核泵浦激光腔内的能量沉积问题,推导了了能量沉积密度的函数关系式。  相似文献   

8.
长距离侧面泵浦激光光纤在泵浦光注入、热管理、非线性抑制等方面具有天然优势,是实现高功率激光输出的有效途径。研制了(1+1)型长距离侧面泵浦激光光纤,采用1018 nm同带泵浦反向注入方式实现了17.4 kW激光输出,斜率效率为82.1%,3 dB线宽为1.3 nm,拉曼抑制比为37.8 dB。研究结果展示了长距离侧面泵浦光纤作为数十千瓦光纤激光放大器增益介质的巨大应用潜力。  相似文献   

9.
太阳光泵浦激光器直接利用太阳光作为泵浦源,实现了太阳光能量到激光能量的直接转化。设计了分腔水冷型金属锥形泵浦腔,以直径8mm,长115mm的Nd:YAG晶体棒作为激光工作物质,用有效面积1.03m2菲涅尔透镜会聚太阳光,实验获得了23.7 W的稳定激光输出,斜效率为7.87%。通过对比实验,改进后的分腔水冷型太阳光泵浦激光器较原有锥形腔激光器有55.92%的激光输出功率提升。分别从侧面泵浦光在冷却水中的吸收损耗以及其耦合效率等方面对新型腔体结构进行了分析,证实了分腔水冷型腔体结构对侧面泵浦效率的提高,并提出了陶瓷漫反射材质的分腔水冷型激光腔的设计。  相似文献   

10.
激光二极管泵浦的高效、单频Nd:YVO4激光器   总被引:2,自引:0,他引:2  
对激光二极管端面泵浦的单频Nd:YVO4激光器进行了研究,研究了不同输出耦合率情况下输出功率随泵浦功率的变化曲线及光-光转化效率随输出耦合率的变化曲线,实验结果与理论分析结果基本一致.当泵浦功率为2.2 W时,得到瓦级单频1064 nm激光输出,最高光-光转化效率为47.2%.  相似文献   

11.
In the present work it is demonstrated that a wideband CO laser operating at fundamental and overtone vibrational transitions is a promising source of laser radiation for remote laser sensing of the atmosphere. A compact slab RF-discharge CO laser has been designed. The optimal operating conditions are determined for this CO laser. In experiments, the maximum average output laser power was ∼12 W for lasing efficiency of ∼14%. Under fixed experimental conditions, stable lasing (with fluctuations of the output laser characteristics ≤5%) was observed during more than one hour, which suggests that we first excited the sealed-off mode of cryogenic slab RF-discharge CO laser. The frequency-selective mode was first obtained for this laser. Wavelengths for sensing of nitrous oxide, nitrogen dioxide, methane, formaldehyde, and some other gases on near-ground propagation paths are determined. Our experiments and calculations confirm that this CO laser is promising for laser gas analysis. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 11, pp. 76–83, November, 2008.  相似文献   

12.
光泵铯蒸气激光的动力学模型   总被引:2,自引:0,他引:2       下载免费PDF全文
朱琦  潘佰良  陈立  王亚娟  张迅懿 《物理学报》2010,59(3):1797-1801
建立了一个物理模型描述了光泵铯蒸气激光的动力学过程和激光机理.结合实验参量,经数值求解该模型,定量分析了抽运光参量、缓冲气压和输出镜反射率等对激光输出功率和光光效率产生的影响,得到了与实验基本一致的模拟结果.表明该模型较好地反映了光泵銫蒸气激光的动力学机理和发射过程,为该类激光的优化设计提供了借鉴和参考.  相似文献   

13.
CO气体分子发射激光需要在低温(液氮温度附近)时才容易实现。为在常温条件下实现CO的激光输出,采用横向激励大气压(TEA)脉冲放电的方式对CO气体分子在室温条件下的红外发光辐射性能进行了实验研究。在实验所限定的参数条件下,没有获得FO波段激光辐射,仅实现了FB波段的激光输出。典型的指标为:电光转换效率1%,中心波长5.3μm,辐射能量0.22 J,辐射脉宽(FWHM)700 ns,相当于辐射的峰值功率达到0.3 mW左右;当以500 Hz放电脉冲重复频率运转时,常温条件下还获得了大于百瓦量级的高平均功率辐射输出。  相似文献   

14.
The dispersive characteristic of the optically pumped FIR laser (OPFIRL) system had been studied theoretically. It was found that the refractive index of the lasing medium was not a constant in the OPFIRL, and the approximate value n=1 must be corrected, otherwise, it will lead to a large error for theoretical calculation of the optimization of the operating parameters of the OPFIRL. The value of n as function of (Ip, Is, x, y, z, P) was calculated theoretically. The additional losses due to the energy exchange between the lasing system and the molecules populated in the energy levels except the appointed three-level system was estimated. The calculated optimum length of the sample tube of OPFIRL with the corrected theory was in pretty good agreement with the experimental result.Supported by national science foundation of PRC  相似文献   

15.
声光可调谐环形腔掺铒光纤激光器   总被引:1,自引:0,他引:1       下载免费PDF全文
杨薇  刘迎  肖立峰  杨兆祥  潘建旋 《物理学报》2010,59(2):1030-1034
应用单级偏振无关的准共线型声光可调谐滤波器为调谐元件,实现了环形腔掺铒光纤激光器的连续可调谐激光输出.简要阐述了与偏振无关的准共线型声光可调谐滤波器的工作原理,对其频移补偿原理进行了分析.实验研究得到:当抽运功率为13mW时,中心波长为1550nm的激光输出功率为322μW,阈值抽运功率在7.65mW左右,斜率效率约为6.02%;并获得了38nm带宽(1524.7—1562.4nm)的连续可调谐激光输出.  相似文献   

16.
掺Yb光纤激光器激射波长与阈值关系研究   总被引:6,自引:0,他引:6  
陈柏  林尊琪 《光学学报》2000,20(6):750-754
依据石英中 Yb3 的能级和光谱特性 ,推导了掺 Yb光纤激光器中激射波长与抽运阈值等的关系式。依据所得到的关系式 ,深入分析、研究了抽运功率、损耗及阈值对激光运行波长的影响。进行了相关实验 ,理论与实验结果符合得很好  相似文献   

17.
考虑激光棒的热透镜效应对有源平平腔、平凹腔进行了数值计算,分析了谐振腔内激光光斑及腔体的稳定性.实验中以Er3+:Yb3+共掺磷酸盐玻璃为工作介质,成功地实现了平凹腔在常温下连续输出TEM00模的1.54μm激光,最大输出功率为21.5mW,光光转换效率达到了0.7%.  相似文献   

18.
The two or multi-mode optically pumped NH3 FIR laser had been studied theoretically. The NH3 molecular gas was assumed to be a three-level system and obeyed the time-dependent behavior of the density matrix equations. Considering the situation of playing the two or multi-mode optical pumping and the FIR laser field were same polarized. The gain coefficient and the output FIR power of the system could be calculated by using the iteration method.It had been predicted that the two or multiple longitudinal mode optically pumped NH3 FIR laser could have a greater output power or higher lasing efficiency than single mode pumped FIR laser under suitable selected operating parameters of laser.Supported by The Education Foundation of PRC.  相似文献   

19.
We report on detailed experiment and modeling of a small-scale, supersonic chemical oxygen-iodine laser. The laser has a 5 cm long active medium and utilizes a simple sparger-type O2(1 ) chemical generator and a medium-size pumping system. A grid nozzle is used for iodine injection and supersonic expansion. 25 W of cw laser emission at 1.315 µm are obtained in the present experiments. The small size and the simple structure of the laser system and its stable operation for long times make it a convenient tool for studying parameters important for high-power supersonic iodine lasers and for comparison to model calculations. The lasing power is studied as a function of the molar flow rates of the various reagents, and conditions are found for optimal operation. Good agreement is found between the experimental results and calculations based on a simple one-dimensional semi-empirical model, previously developed in our laboratory and modified in the present work. The model is used to predict optimal values for parameters affecting the laser performance that are difficult to examine in the present experimental system.  相似文献   

20.
本文基于随机激光的时域理论,研究了飞秒脉冲抽运下二维随机激光的辐射特性,并着重讨论了抽运脉冲的峰值强度、脉宽和脉冲波形对辐射光时域波形的影响.结果表明, 辐射光的时域波形强烈依赖于抽运光脉冲的参数,通过调整抽运方式可以控制辐射光的输出波形.数值模拟结果为研究随机激光输出波形的可控性技术提供了理论依据. 关键词: 激光物理 随机激光器 飞秒抽运 脉冲波形  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号