共查询到19条相似文献,搜索用时 109 毫秒
1.
测量物体位移的数字白光散斑照相术 总被引:2,自引:1,他引:1
给出了一测量物体刚体位移的数字白光散斑照相术。数字傅里叶变换从双曝光字白光散斑图用来产生杨氏条纹。该杨氏条纹能够用数字傅里叶变换结合条纹重构进行自动分析。此外,给出一种条纹质量增强的方法。 相似文献
2.
一种基于傅里叶变换的分析载波条纹的新方法 总被引:1,自引:0,他引:1
针对传统傅里叶变换法处理光载波干涉条纹图时会有边缘效应产生的问题,提出了一种基于傅里叶变换法的外推延拓方法,并从理论上进行了数学推导。为了验证这种方法的正确性,分别对一维数字信号和二维空间载波条纹图进行了数值模拟,进一步分析了误差产生的原因,并与传统的傅里叶变换法对比。结果表明该法可以有效抑制传统傅里叶变换法处理光载波干涉条纹图时边缘效应所造成的较大误差,在基于空间域相位调制技术的波面干涉测量中,对空间载波条纹图进行处理,可以使相位的计算精度达到3.3 mrad。 相似文献
3.
4.
5.
6.
基于傅里叶变换的高精度条纹细分方法 总被引:2,自引:1,他引:2
针对传统傅里叶变换法在提取条纹图相位中存在的能量泄漏问题,提出了条纹图整周期裁剪的方法,可有效抑制能量泄漏对检相精度的影响,提高傅里叶变换法相位计算的精度。在此基础上,提出了一种基于傅里叶变换时移特性的叠栅条纹细分新方法。与传统傅里叶变换法相比,该方法求取相邻两帧条纹图间的相移,只需经过两次傅里叶变换,不需要截取条纹图的基频再逆变换回空域,因此计算量至少减少了一倍,计算速度大大提高。数值计算结果表明,对两束单色平面波形成的条纹,理想条件下细分精度高达10-12量级;对高斯包络调制的条纹,细分精度至少可达10-3量级。 相似文献
7.
光纤傅里叶变换光谱仪干涉图的对称化处理 总被引:2,自引:0,他引:2
偏离中心条纹的抽样以及光纤干涉仪的缺陷引起光纤傅里叶变换光谱仪(FFTS)输出的干涉图不对称,导致由傅里叶余弦变换计算得到的光谱带有相位误差,影响光谱的线型。文章首次将卷积方法应用到光纤傅里叶变换光谱仪中干涉图的对称化处理,利用干涉图的中心部分计算出相位误差,通过傅里叶变换得到了对称化处理函数,用卷积运算在时域完成了光谱的相位误差校正。实验研究表明,在FFTS中该方法能在时域有效地实现干涉图对称化,校正了光谱的相位误差。该方法不仅克服了双边干涉图的缺点,而且校正的结果有较高的准确度。 相似文献
8.
9.
本文提出了一种新的以晶体锥光偏光干涉效应为原理的强度空间滤波器的方法以及用于傅里叶滤波准光干涉术进行相位测量的原理.这种方法不需要傅里叶变换透镜以及空间滤波器图案板.讨论了各种具体结构,分析了工作特性,叙述了能产生多种等位线条纹系统并可带有背景条纹.最后给出实验例子. 相似文献
10.
11.
Sanjit K. Debnath Mahendra P. Kothiyal Seung-Woo Kim 《Optics and Lasers in Engineering》2009,47(11):1125-1130
Spectral phase in a white-light interferogram contains information about the absolute optical path difference (OPD) in the interferometer. Evaluation of spectral phase is therefore important in applications such as profilometry with white light. In spectrally resolved white-light interferometry (SRWLI) the white-light interferogram is spectrally decomposed by a spectrometer in order to determine this phase. Several single-frame techniques in SRWLI have been proposed for the evaluation of the phase including Fourier transform, Hilbert transform, spatial phase shifting, windowed Fourier transform and wavelet transform. In this paper we present a comparative study of these techniques in this application in relation to the temporal phase-shifting technique which is a multi- frame method. Further, we also propose a modified method to remove the influence of source spectrum modulation in Hilbert transform procedure. 相似文献
12.
A measurement technique for depth profiling in a time-domain low-coherence interferometer has been proposed. The spatial variation
of the optical path caused by a diffraction grating in the Littrow configuration produces a white-light interferogram. A one-dimensional
charge-coupled device (1D-CCD) detector is used to measure the undersampled white-light interferogram. The position of the
reflective boundary is calculated from the rate of phase change with spatial frequency, which is based on the sub-Nyquist
sampling of the white-light interferogram in the frequency domain. 相似文献
13.
根据相似性准则,对采集到的干涉图像进行干涉图元的拆分,通过寻址定位,得到与离散光程差序列相匹配的采样干涉图序列。采用过零采样方式,对大单边干涉图序列与小双边干涉图序列利用不同的窗函数进行切趾。为了校正相位误差,结合所研究采样干涉图的特点,对频域光谱乘积校正和空域干涉图卷积校正进行了研究和改进,获得了比较理想的光谱线形,其中空域干涉图卷积校正后的光谱偏差仅为0.012088,具有最好的校正效果。 相似文献
14.
Accurate carrier-removal technique based on zero padding in Fourier transform method for carrier interferogram analysis 总被引:1,自引:0,他引:1
Based on interferogram zero padding and fast Fourier transform (FFT) methods, an effective, straightforward and stable carrier-removal approach in Fourier transform (FT) based method for carrier interferogram analysis is proposed. The spatial carrier interferogram is firstly extrapolated by zero padding method, and the carrier-frequency values within a small fraction of an integral (or a pixel) are estimated from the extrapolation interferogram with FFT method. Then the carrier-phase component is removed by subtracting a pure carrier-frequency phase constructed by the estimated carrier-frequencies in the spatial domain. Numerical simulations and experiments are given to demonstrate the performance of the proposed method and the results show that the proposed method is effective and stable for suppressing the carrier-removal error in the FT method for carrier interferogram analysis. 相似文献
15.
Micro-profile measurement based on windowed Fourier transform in white-light scanning interferometry
White-light scanning interferometry (WLSI) has been widely used in micro-profile measurement such as Micro-Electro-Mechanical Systems (MEMS) and Computer Generated Hologram (CGH) diffractive elements. It does not contain phase ambiguity problem which is often encountered in monochromatic wavelength interferometry. This paper presents an algorithm based on windowed Fourier transform (WFT) to extract the phase of a white-light interferogram and compensates for the difference in zero optical path difference (ZOPD) position in WLSI. With the WFT technique, the center wavelength of a white-light source and the phase of a white-light interferogram could be retrieved simultaneously. The effect of noise, scanning interval of a piezoelectric transducer (PZT) and the window size of WFT are also analyzed. Both simulated and experimental results show that the proposed algorithm has good noise immunity and is able to accurately measure the micro-profile of a specimen. 相似文献
16.
We describe a method for time-domain surface profile measurements via white-light reflection spectroscopy using a hyperspectral Fourier transform spectrometer (HS-FTS). This technique measures the frequency of the spectral modulation of reflected light from a multilayer optical surface and reports the spatially resolved optical thickness. Owing to the Fourier relationship, the Fourier transform spectrometer manifests this spectral modulation as temporal satellites in interferogram space. We show that measurement of the positions of these satellites can be used to reconstruct the optical thickness profile over a surface using the HS-FTS. 相似文献
17.
提出了一种新型的基于Savart偏光镜的外差式偏振干涉成像光谱技术,该技术在偏振干涉成像光谱仪中引入一对平行偏振光栅对,使其得到的干涉图频率与波数相关,具有了波数外差的特点,降低了干涉图频率,从而可利用较少的采样点数实现很高的光谱分辨率.对外差式偏振干涉成像光谱技术的基本原理进行了研究,详细分析了系统光程差、干涉图表达式、光谱分辨率以及光谱复原方法等.最后给出了外差式偏振干涉成像光谱仪的设计实例并进行了计算机仿真模拟,所复原的光谱与输入光谱曲线相符合,验证了方案的正确性.外差式偏振干涉成像光谱仪具有结构紧凑、光通量高、稳定性强、光谱分辨率高的特点,尤其适合超小型高稳定性、高探测灵敏度的高光谱探测应用. 相似文献
18.
光纤法布里-珀罗传感器串连复用的傅里叶变换解调方法初探 总被引:6,自引:2,他引:4
光纤法布里—珀罗传感器复用、特别是串连复用的解调十分困难。为解决这个问题,从光纤法布里—珀罗应变传感器的基本原理出发、在仅有两只传感器复用的基本条件下,深人分析了复用系统组合输出光强信号及其分布特性;研究了对其进行傅里叶变换的解调原理及具体实现方法,分析了因复用信号不满足傅里叶变换条件而在变换域产生的畸变,进行了计算机仿真解调。在此基础上,搭建了两只传感器的串连复用实验系统,并用此方法实现了两只复用传感器的解调,且传感器之间的相互影响小于5%。理论与实验表明,虽然传感器的复用信号不满足傅里叶变换的标准条件,且仿真与实验存在一定差异,但所提出的傅里叶变换方法,基本可用于光纤法布里—珀罗传感器的串连复用解调。 相似文献
19.
对群折射率的精确而快速测量是光学工程领域一个基础而又亟需解决的难题,本文提出了一套光谱型迈克尔逊白光干涉系统的解决方案.该系统充分利用了微型光纤光谱仪一次测量便可获得所有干涉信息的特点,无需机械扫描装置,具有结构简单和测量快速的优点.与传统的窗口傅里叶变换算法相比,本文采用小波变换直接从干涉信号的小波脊中提取群延迟,减小了由相位求导得到群延迟过程中引入的误差放大效应,进而提高了群折射率的测量精度.基于此迈克尔逊白光干涉系统,在不同干涉位置处对两块不同厚度的石英和BK7玻璃进行了测量,实验结果表明此方法在宽
关键词:
白光干涉
群折射率
小波变换
傅里叶变换 相似文献