木质素催化转化制备异丙苯

Cumene is an important intermediate and chemical in chemical industry.In this work,directional preparation of cumene using lignin was achieved by a three-step cascade process.The mixture aromatics were first produced by the catalytic pyrolysis of lignin at 450℃ over 1% Zn/HZSM-5 catalyst,monocyclic aromatics with the selectivity of 85.7 wt% were obtained.Then,the catalytic dealkylation of heavier aromatics resulted in benzene-rich aromatics with 93.6 wt% benzene at 600℃ over Hβ catalyst.Finally,the cumene synthesis was performed by the aromatic alkylation,giving cumene selectivity of 91.6 C-mol% using the[bmim]Cl-2AlCl₁₃ ionic liquid at room temperature for 15 min.Besides,adding a small amount of methanol to the feed can efficiently suppress the coke yield and enhance the aromatics yield.The proposed transformation potentially provides a useful route for production of cumene using renewable lignin.     

温和温度与常压下纤维素在其均相水溶液中的降解

Degradation of cellulose to chemicals is one of major routes for biomass conversion. Here, a new simple and two-step method has been developed to convert cellulose in its homogeneously alkaline solution to organic acids under atmospheric pressure at mild temperature. At first, cellulose was degraded to small molecular intermediates at 110 ℃ for 3 h under atmospheric pressure, and then it was oxidized with H₂O₂ at 50 ℃ for 4 h. Under the optimal condition, 73.5% conversion of cellulose could be achieved, and the yield of organic acids was 32.8% (formic acid), 11.6% (lactic acid), and 2.3% (oxalic acid), respectively. It is noteworthy that the new strategy reduces energy consumption in the process of reaction, unlike the hydrothermal reaction under high temperature and high pressure.     

MgO/NaY催化剂上葡萄糖水中异构制取果糖的研究

The MgO/NaY catalysts prepared by impregnation method were used for the conversion of glucose to fructose in water medium.The effects of MgO loading,reaction temperature,glucose concentration and reaction time on the catalytic performance for the reaction were studied.The activity testing results indicated that fructose could be generated effectively by controlling the components of the catalyst and reaction conditions.The maximal fructose yield of 33.8% with the selectivity of 67.3% was achieved over the 10% MgO/NaY catalyst at 100 ℃ for 2 h.Moreover,the catalysts were characterized by XRD,BET,and CO₂-TPD techniques.The structural property of NaY with higher surface area facilitated glucose conversion,and the modulated basicity of the catalyst with MgO addition contributed to the formation of fructose in the tautomerization of aldose to ketose.     

SiO2表面双酚A中空分子印迹纳米球的制备及识别性能

A novel and effective approach was developed to synthesize monodisperse hollow molecularly imprinted polymers (MHMIPs) with unfunctionalized SiO₂ spheres in a mixture of toluene and CH₃CN.The factors that affected the synthesis of MHMIPs were systematically investigated.It was determined that a suitable ratio of toluene to CH₃CN and the use of a functional monomer that can generate double H-bonding interactions were the critical factors to obtain MHMIPs with high uniformity and monodispersion.The obtained MHMIPs exhibited a fast adsorption rate and high adsorption capacity (270 μmol/g) for bisphenol A.As the shell thickness increased from 90 nm to 130 nm,the binding capacity of the imprinted shells decreased gradually.The relative selectivity coefficients of MHMIPs for tetra-bromobisphenol A (TBBPA),phenol and p-tert-butylphenol (PTBP) were calculated as 1.53,1.83 and 1.90,respectively.These findings indicate that MHMIPs have good adsorption performances and suggest applications in the selective removal or sensitive analysis of bisphenol A.     

硅铝催化剂催化有机溶剂木质素的解聚

E cient conversion of lignin to fine chemicals and biofuel become more and more attractive in biorefinery. In this work, we used a series of silica-alumina catalysts (i.e., SiO₂-Al₂O₃, HY, Hβ, and HZSM-5) to degrade lignin into arenes and phenols. The relationship between the catalyst structure and lignin depolymerization performance was investigated. The results showed that both acidity and pore size of the catalyst could in uence the conversion of lignin. In the volatilizable product, phenols were identified as the main phenolic monomers via gas chromatography-mass spectrometer. SiO₂-Al₂O₃ was the most effcient catalyst, giving 90.96% degree of conversion, 12.91% yield of phenols, and 2.41% yield of arenes in ethanol at 280℃ for 4 h. The Fourier transform infrared spectroscopy and ¹H nuclear magnetic resonance spectroscopy analysis demonstrated that deoxygenation and alkylation occurred in this process. The effect of solvents was also investigated and the results showed that ethanol was the most effcient solvent.     

Frequency doubling of phase-modulated femtosecond laser pulses in periodically poled and chirped nonlinear crystals

The second harmonic generation (SHG) at a wavelength of 0.8 μm by 50-and 10-fs pulses with and without phase modulation (PM) was systematically studied in LiNbO₃ crystals with regular domain structure and linearly varied domain thickness. The main results were obtained by numerical method, taking into account the difference between group velocities of interacting pulses and the group-velocity dispersion. In the approximation of the given field of the fundamental radiation, an analytical expression was derived for the spectral density of the second harmonic in the periodically poled nonlinear crystal (PPNC) under nonstationary excitation conditions. It was numerically found that the conversion efficiency of about 90% can be achieved by doubling the frequency of 50-fs laser pulses without PM in the LiNbO₃ PPNC. The maximum conversion efficiency for the SHG by PM pulses is achieved at a certain optimum chirp step in the crystal domain length, which depends on both the value and sign of frequency modulation.     

利用二氧化碳的缓慢释放控制聚丙烯酰胺在含柠檬酸铬水溶液中的粘度

Partially hydrolyzed polyacrylamide (HPAM) has been widely used for water shut-off and profile control to enhance oil recovery. Herein, we reported a novel technique by which the crosslinking between HPAM and Cr³⁺ in aqueous solutions at 60 ℃ can be delayed effectively. Citric acid was selected as an organic complexing agent of Cr³⁺ so that the crosslinking between HPAM and Cr³⁺ can be prevented completely. Due to the decomposition of the bicarbonate (HCO₃^-) embedded in solution, CO₂ released from solution and the pH value of solution increased gradually. The degree of ionization of HPAM and its ability to complex with Cr³⁺ increased accordingly. When the complexation of Cr³⁺ with HPAM is stronger than that with citric acid, the viscosity of the HPAM solution increased significantly. Under the closed condition, together with the existence of potassium dihydrogen phosphate (KH₂PO₄), the release of CO₂ was very slow and the condition was highly controlled so that the ionization of HPAM was prevented initially. Furthermore, the hydrogen bonding interactions between HPAM and melamine embedded in solution previously also postponed the ionization of HPAM. As a result, the crosslinking between HPAM and Cr³⁺ can be delayed for almost one month, completely meeting the requirements for deep water shut-off and profile control to enhance oil recovery.     

CdSe/CdTe II型胶态量子阱中长寿命的单激子、带电激子和双激子

Light-harvesters with long-lived excited states are desired for efficient solar energy conversion systems. Many solar-to-fuel conversion reactions, such as H₂ evolution and CO₂ reduction, require multiple sequential electron transfer processes, which leads to a complicated situation that excited states involves not only excitons (electron-hole pairs) but also multi-excitons and charged excitons. While long-lived excitons can be obtained in various systems (e.g., semiconductor nanocrystals), multi-excitons and charged excitons are typically shorted-lived due to nonradiative Auger recombination pathways whereby the recombination energy of an exciton is quickly transferred to the third carrier on a few to hundreds of picoseconds timescale. In this work, we report a study of excitons, trions (an exciton plus an additional charge), and biexcitons in CdSe/CdTe colloidal quantum wells or nanoplatelets. The typeⅡ band alignment effectively separates electrons and holes in space, leading to a single exciton lifetime of 340 ns which is ~2 order of magnitudes longer than that in plane CdSe nanoplatelets. More importantly, the electron-hole separation also dramatically slows down Auger decay, giving rise to a trion lifetime of 70 ns and a biexciton lifetime of 11 ns, among the longest values ever reported for colloidal nanocrystals. The long-lived exciton, trion, and biexciton states, combined with the intrinsically strong light-absorption capability of two-dimensional systems, enable the CdSe/CdTe type-Ⅱ nanoplatelets as promising light harvesters for efficient solar-to-fuel conversion reactions.     

Efficient 266nm Ultraviolet Beam Generation in K2Al2B2O7 Crystal

The ultraviolet beam at 266nm was obtained by fourth harmonic generation of 1064nm Nd:YAG laser radiation through a nonlinear crystal K2Al2B2O7 (KABO).The fundamental frequency of a flash-lamp pumped Nd:YAG laser was doubled in a β-Ba2B2O4 crystal to generate a second harmonic output at the wavelength of 532nm,and then doubled again in the KABO crystal to generate the fourth harmonic output at 266nm.The optical conversion efficiency from 532 to 266 nm was investigated for the first time,and 13% was achieved.     

HIGH-YIELD PRODUCTION OF MULTI-WALLED CARBON NANOTUBES BY CATALYTIC DECOMPOSITION OF BENZENE VAPOR

Multi-walled carbon nanotubes (CNTs) have been synthesized on γ-Al₂O₃ supported unitary, binary or trinity metal (Fe, Co, Ni) catalysts with benzene as carbon source in the range of 600 to 810 ℃. The growth of CNTs was carried out in a fixed bed flow reactor and the quality of carbon deposits was characterized by transmission electron microscopy. The preparation was optimized and the high-yield production of CNTs has been achieved for three mixture catalysts with the yield of high-quality CNTs higher than 200% within 60 min, reaching a maximum of 278% for 1.51 mmol/g Fe-1.51 mmol/g Co/γ-Al₂O₃ catalyst. This provides a good alternative for future large scale and low cost production of CNTs for applications.     

混合物物态方程的计算

 在采用体积相加原理计算混合物物态方程的基础上,建立了一种物理模型确定混合物温度。根据混合物中各组分温度和压强平衡条件,采用压强-密度迭代方法计算给出混合物物态方程,编制了两种组分的混合物物态方程计算程序。为检验建立的温度模型的合理性及程序的有效性,分析了不同密度、温度状态的氢（H2）和钨（W）组成的混合物状态参量,计算了以下情形及其组合情形的混合物物态方程：H₂和W以不同质量比混合;质量比固定,单组分状态不同;温度区间和密度区间不同。研究表明:实际应用中在建立的混合物温度模型基础上确定的混合物物态方程是合理的。     

Infrared Quantitative Study of Acetylation of Microspheres of Polystyrene

Abstract

Fourier transform infrared spectroscopy has been used to study quantitatively the acetylation of monodisperse polystyrene microspheres with diameters ranging from 7 to 9μm. The CH₂ stretching infrared vibration mode at 2921 cm^?1 was used as the internal intensity standard. The acetylation extent could be easily measured by comparing the relative intensities of the bands of acetyl group (1678, 1415, 1359 cm^?1) or the bands due to the para-substituted benzene ring to the band at 2921 cm^?1 from the calibration curve.     

Application of the method of X-ray fluorescence analysis for determination of the degree of chlorination of copper phthalocyanin

To whom correspondence should be addressd.     

分子费米共振拉曼光谱强度分析

测量了CCl_4和CS_2分子的Raman光谱。用Bertran理论和群论等相关理论对其光谱强度进行了分析,获得了发生费米共振分子的拉曼光谱强度的特殊规律:(1)发生费米共振的基频和倍频(和频)间发生能量转移,两光谱强度大小相互接近,当发生费米共振的基频和倍频(和频)间距离很小时,两发生费米共振的光谱强度相等(R=1);(2)能出现倍频光谱强度高于其基频光谱强度;(3)也会观测到费米共振光谱,而观测不到参与费米共振的和频中的基频光谱。此研究对化学、材料科学中的分子结构、材料成分等研究中的谱线认证、归属有很好的参考价值。     

傅里叶望远镜外场实验性能改进和结果分析

为了实现对傅里叶望远镜成像系统更接近实际的仿真,改进了外场实验系统结构。采用反射式目标,利用准直扩束镜替代空间滤波器和准直透镜,使用大靶面电荷耦合器件作为监视器。在无大气和包含200m水平大气两种情况下,分别对2.5mm的4种不同空间频谱分布目标进行实验。实验选用9×9,17×17,33×33和65×65傅里叶分量分别进行重构。最高成像角分辨率为3.5″。结果表明含大气与无大气重构结果的Strehl比值相近,从而证明傅里叶望远镜成像系统能够克服下行链路低阶大气扰动的影响。     

Asymptotic properties of sequences of iterates of nonlinear transformations

By considering functions defined on the unit interval with a single zero minimum and a single unit maximum we are led to a version of the doubling or universal transformation. The fixed point functions of this doubling transformation have certain invariance properties under conjugacy. These invariance properties lead to a widening of the concept of universality to power law conjugacy classes in which the Feigenbaum divergence parameter is a function only of the product of the powers with which iterating functions approach unity at the maximum and zero at the minimum. We also construct an effective method for computing the divergence parameter from iterates, and derivatives of iterates, generated by the appropriate fixed point function.On leave from Mathematics Department, University of Melbourne, Parkville, Victoria 3052, Australia.     

Some peculiarities of deep PT-changes of physical properties of rocks

Abstract

Results of petrophysical PT-experiments are discussed. Used is a method of program modeling of experiments. Thermobaric dependence of elastic properties of acid, intermediate and basic rocks as well as elastic wave velocity anisotropy in amphibolites is studied. Deep PT-regimes effect on electrical resistance of dry and water-saturated rocks has been studied. PT-conditions of full loss of the remanent magnetization of volcanites have been established. A number of regional petrophysical lithosphere models has been constructed.     

Electron microscopy study of aggregation of microclusters of sulphur

A study of aggregation of sulphur particles in colloidal suspension of sulphur in water-methanol mixture using TEM and electron diffraction is reported. From the micrographs the aggregates formed have been found to be random and tenuous indicating a fractal structure. The electron diffraction patterns of the aggregates are used to study the mechanism of diffusion and reaction limited aggregation.     

BSA-SDS-Ag聚合物纳米微粒的制备及其水凝胶性质的研究（Ⅰ）

报道了BSA－SDS－Ag聚合物纳米微粒的制备及水凝胶的性质,用X射线衍射（XRD）、透射电镜（TEM）、傅里叶变换红外（FT－IR）光谱考察了这种聚合物微粒的结构,微粒粒径32nm左右,用UV／Vis光谱及SEM考察了冰凝胶的性,表明Ag^ 离子先与BSA产生化学键合,再学原了Ag粒,进行聚合成网状结构的聚合物。     

Simulation of the contours of spectral lines of closed-ARC radiation

Simulated contours of self-reversed lines of Tl at 535 nm (7²S_1/2−6²P_3/2) and 378 nm (7²S_1/2-6²P_1/2) in alternating-current closed-arc radiation in mercury vapor with an addition of Tll were compared with experimental contours. It is shown that while a single self-reversed contour has many different sets of model parameters that ensure coincidence of experimental and calculated profiles, in the case of operation with a large data file of contours that correspond to different directions of observation along chords perpendicular to the discharge axis, and with different lines that have a common level, such a set of parameters becomes virtually unique. Instantaneous spatial distributions of Hg and Tl atoms in the ground state and of Tl atoms in the 6²P_3/2 state are determined and the parameters of the van der Waals broadening of the 7²S_1/2 level are found. It is shown that a considerable “red” shift of absorption contours in the outer layers of the discharge is observed. The results obtained contradict the presumed existence of local thermodynamic equilibrium in the given discharge. Reported at the Conference “Plasma Physics and Plasma Technologies,” Minsk, September 15–19, 1997 Petrozavodsk State University, 33, Lenin Ave, Petrozavodsk, 185640, Russia. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 65, No. 5, pp. 761–768, September–October, 1998.