三维抛体问题

依据不同三维抛体模型, 采用合适的三维坐标系, 来求解运动轨迹、 落点特性和初始条件等问题     

双光子技术在三维成像和三维存储技术中的应用

对双光子过程的空间分辨能力进行了理论分析。阐明了双光子技术在三维成像和三维存储中的独特优势。着重介绍了双光子技术与扫描共焦显微术、近场显微术相结合进行三维成像 ,以及一种多焦点多光子显微术和用连续光源激发的双光子三维成像技术的研究和进展情况。对建立在共焦显微镜基础之上的双光子三维光存储和微细加工方面的研究也作了回顾与展望     

一种三维环流模型及其应用

本文建立了一种广泛适用于大陆架浅海的三维环流模型。模型的支配方程是具有自由面的三维非线性瞬态Navier-Stokes方程。支配方程经σ坐标变换后与边界条件一起在空间交错网格系统上用差分法求解。为提高计算效率,基于问题的物理性质引入过程分裂概念没计了计算框架:将三维流动过程分成长重力波的传播(外模式)和速度的垂向剪变(内模式)两大组成部分,对每个部分分别选用最适宜各自物理特性和数值行为的数值方法求解。最后做为本模型的应用实例,计算了渤海三维潮流,获得了很好的结果。     

蛋白质电子晶体学

介绍了蛋白质电子晶体学的基本概念，研究对象以及电子显微学三维重构的原理，概括地描述了蛋白质二维晶体生长技术、电镀样品的制备与观察方法和数据处理流程，通过一些典型事例，说明了蛋白质电子晶体学的发展现状，并展望了该学科的发展前景。     

基于海量散乱点数据三维显示新算法的研究

逆向工程中基于海量散乱点的三维模型重建,在许多应用中具有重要意义.由于测量系统精度的限制和测量数据无法直接与三维显示系统相结合,这也成为逆向工程发展的一个瓶颈.对传统的基于多边形网格的生成过程及Bezier插值细化进行了深入的研究,分析了其中的缺点和不足,并在此基础上提出了三维显示模型构建的新算法,即单层串珠算法、相邻...     

彩色数字编码投影光栅三维轮廓术的研究

研究了一种用彩色条纹对光栅进行数字编码的方法。其中投影光栅用白、红、绿、蓝和它们的补色黑、青、品、黄按照四位二进制原理对光栅进行编码。用白色和黑色条纹分别表示八位上的1和0;用红色和青色条纹分别表示四位上的1和0;用绿色和品色条纹分别表示二位上的1和0;用蓝色和黄色条纹分别表示个位上的1和O。这样在一个周期中共有64个条纹。这样的空间周期能够胜利一般特体的测量。由于每个的条纹只有一个逻辑状态,所以这种方法具有较好的抗干扰能力。     

于散乱三维点云的缺陷检测和三维重构方法

设备表面的缺陷检测对于保证安全生产避免经济损失具有重要意义。针对基于设备表面散乱三维点云缺陷检测和三维重构算法复杂的问题,提出了一种基于散乱三维点云的缺陷检测和三维重构方法。对散乱三维点云沿某一轴向进行分层处理,将同一层内的三维点进行移位规则化处理,并对规则化的三维点云进行缺陷检测和三维重构。分别对无缺陷设备表面和凹凸缺陷设备表面进行缺陷检测和三维重构,规则化前后三维数据缺陷计算结果相对误差为1.01%。实验结果表明,将散乱三维点云分层和规则化处理有效降低了缺陷检测和三维重构的复杂度,易于实现。     

三维虚拟动态测量系统构建方法研究

针对传统二维测量系统存在测量精度较低、稳定性差的不足,提出一种基于数据交互的三维虚拟动态测量方法。该方法采用三维构型与总线技术同步耦合的工作方式,对三维测量系统中模型驱动的关键问题进行了研究,探讨了三维测量系统中数据交互解决方法的可行性,并将该方法应用于煤矿排水系统,完成了三维虚拟动态测量系统的开发。试验结果表明由该方法实现的三维虚拟动态测量系统具有运行稳定、操作简单、直观性强、可靠性高的优点,应用前景广阔。     

彩色三维激光扫描测量方法的研究

提出了彩色三维激光扫描测量方法，即在单色三维激光扫描测量数据上贴合彩色的数字图像。给出了单色三维测量模型——三维光平面方程测量模型，提出了全新的测量系统参量的快速标定方法，并制作了标定靶标。给出了物体三维数据和颜色信息的贴图技术。利用所研制的装置对招财猫模型进行了实验测量，得到了满意的结果。     

真实场景的三维视频采集及显示

提出了一种真实场景三维视频采集及彩色显示的方法.设计了一种采用条纹投影的实时三维成像系统及采用液晶空间光调制器的实时全息彩色三维显示系统.在三维成像系统中采用π相移正弦条纹与编码图案结合实现绝对相位测量,从而可以测量孤立物体.同时对采用数字微镜的投影仪进行改造,实现高速投影,并与高速摄像机配合实现三维视频采集.首先利用实时三维成像系统同时获取三维场景的彩色强度像和距离像;然后根据这些三维成像数据, 设计和制作计算菲涅耳全息图;最后在实时全息彩色三维显示系统中再现.三维信息的采集和显示速度达到了60帧每秒.     

Exponential discretization of the Perfectly Matched Layer (PML) absorbing boundary condition simulation in FD-TD 3D

We present the discretized equations of the 12 PML (perfectly matched layer) in the three-dimensional case using the Cartesian geometry. These equations can be used in different fields where Maxwell equations need to be solved.     

Visualization of 3D variable in time object based on data gathered by active measurement system

The recent needs of analysis and visualization of variable in time real 3D objects in many applications require development of new approach towards combining rapid 3D shape acquisition and the methodology of data processing in order to perform visualization and analysis of real 3D dynamic objects. In this paper, the general concept of visualization system of data gathered by means of optical 4D (x,y,z,t) shape measurement system is presented. The concept of a virtual camera, as the mean for interactive object visualization is introduced. The experimental results for processing of simulated and real variable in time 3D object are presented and discussed. The directions of future works focused on full implementation of the concept are introduced.     

Optoranger: A 3D pattern matching method for bin picking applications

This paper presents a new method, based on 3D vision, for the recognition of free-form objects in the presence of clutters and occlusions, ideal for robotic bin picking tasks. The method can be considered as a compromise between complexity and effectiveness. A 3D point cloud representing the scene is generated by a triangulation-based scanning system, where a fast camera acquires a blade projected by a laser source. Image segmentation is based on 2D images, and on the estimation of the distances between point pairs, to search for empty areas. Object recognition is performed using commercial software libraries integrated with custom-developed segmentation algorithms, and a database of model clouds created by means of the same scanning system.Experiments carried out to verify the performance of the method have been designed by randomly placing objects of different types in the Robot work area. The preliminary results demonstrate the excellent ability of the system to perform the bin picking procedure, and the reliability of the method proposed for automatic recognition of identity, position and orientation of the objects.     

Investigation of resolution of the stereoscopic 3D images

Evaluation of 3D images is an important part of 3D display developments. In this paper, we propose an evaluation method which can reflect the characteristics of the stereoscopic 3D images in the depth direction. Perception of the depth planes is verified using a subjective evaluation method. Resolution of the stereoscopic 3D images which represents the distribution of the 3D images in the depth direction quantitatively is calculated and analyzed.     

Interpolation algorithm for recovering the missing phase values in 3D measurement

In the three-dimensional (3D) phase measurement, some marks are usually adhered to the object in order to make the 3D registration process faster and easier. As covered with marks, local phase data are missing and have to be interpolated later. Considering the phase distribution nearby the marks, a gradient estimate (GE) interpolation algorithm is provided here. This algorithm recovers one pixel's missing phase value with the average of the estimated values which is calculated by gradients in eight directions nearby. Since this algorithm is a local processing, the missing phase values should be interpolated from the edge of the marks to the center. In the computer simulation and the practical experiment, compared with the same-size neighborhood mean (NM) algorithm and the Gerchberg-Saxton (GS) algorithm, this new algorithm achieves very good fit results with the least time. So it can be used as a practical tool for automatic missing phase interpolation.     

3D high-resolution acoustic imaging of the sub-seabed

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable frequency-modulated source signature to produce vertical seismic reflection cross-sections of the sub-seabed. Here a 3D Chirp system is described that operates in the frequency range of 1.5-13 kHz, to produce a three-dimensional image of the sub-seabed, with typical penetration of 10-30 m and decimetric horizontal and vertical resolution. The system design incorporates a rigid frame that contains the Chirp source array together with 60 receiver elements, with positioning provided by an integrated real-time-kinematic (RTK) global positioning system (GPS). The system can be surface towed from a small survey vessel and can be applied to targets of marine geological, engineering, archaeological and defence interest. Data acquisition and processing are described for a case study which images a buried engineering structure in the Port of Southampton.     

Three-dimensional high-resolution acoustic imaging of the sub-seabed

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable frequency-modulated source signature to produce vertical seismic reflection cross-sections of the sub-seabed. Here a 3D Chirp system is described that operates in the frequency range of 1.5-13 kHz, to produce a three-dimensional image of the sub-seabed, with typical penetration of 10-30 m and decimetric horizontal and vertical resolution. The system design incorporates a rigid frame that contains the Chirp source array together with 60 receiver elements, with positioning provided by an integrated real-time-kinematic (RTK) global positioning system (GPS). The system can be surface towed from a small survey vessel and can be applied to targets of marine geological, engineering, archaeological and defence interest. Data acquisition and processing are described for a case study which images a buried engineering structure in the Port of Southampton.     

计算机3D立体图的设计和制造

介绍了计算机３Ｄ立体图的分类和基本原理，给出了计算机３Ｄ立体图的设计制造过程，讨论了计算机３Ｄ立体图的应用前景和发展方向     

发展3D NOE-NOE分析软件的策略

本文发展了一种对3D形式的2D NOE分析软件,提出了一种可表达2D NOE与3D NOE-NOE峰值之间关系的数学模型,并考虑了存储空间与CPU时间的平衡.