温度和应变速率耦合作用下纳米晶Ni压缩行为研究

本文利用低温力学测试系统研究了电化学沉积纳米晶Ni在不同温度和宽应变速率条件下的压缩行为. 借助应变速率敏感指数、激活体积、扫描电子显微镜及高分辨透射电子显微镜方法, 对纳米晶Ni的压缩塑性变形机理进行了表征. 研究表明, 在较低温度条件下, 纳米晶Ni的塑性变形主要是由晶界位错协调变形主导, 晶界本征位错引出后无阻碍的在晶粒内无位错区运动, 直至在相对晶界发生类似切割林位错行为. 并且, 在协调塑性变形时引出位错的残留位错能够增加应变相容性和减小应力集中; 在室温条件下, 纳米晶Ni的塑性变形机理主要是晶界-位错协调变形与晶粒滑移/旋转共同主导. 利用晶界位错协调变形机理和残留位错运动与温度及缺陷的相关性揭示了纳米晶Ni在不同温度、不同应变速率条件下力学压缩性能差异的内在原因.     

Evidence for a transition in deformation mechanism in nanocrystalline pure titanium processed by high-pressure torsion

Nanocrystalline titanium with an average grain size of about 60–70 nm was prepared by high-pressure torsion. The results of hardness and structural evolutions indicate that a strain-induced hardening–softening–hardening–softening behaviour occurs. For coarse-grained titanium, 〈a〉-type dislocation multiplication, twinning and a high pressure-induced α-to-ω phase transformation play major roles to accommodate deformation, leading to a significant strain hardening. As deformation proceeds, dynamic recrystallisation leads to a decrease in dislocation density, especially for 〈a〉-type dislocations, leading to a slight strain softening. The 〈c〉-component dislocation multiplication dominates the deformation when the grain size decreases to 100 nm and 〈c〉-component dislocation multiplication, grain refinement and the α-to-ω phase transformation contribute to the second strain hardening. The following strain softening is attributed to dynamic recovery.     

纳米多晶铜的超塑性变形机理的分子动力学探讨

在聚能装药爆炸压缩形成射流的过程中, 伴随着金属药型罩的晶粒细化, 从原始晶粒30-80 μm细化到亚微米甚至纳米量级, 从微观层面研究其细化机理和动态超塑性变形机理具有很重要的科学意义. 采用分子动力学方法模拟了不同晶粒尺寸下纳米多晶铜的单轴拉伸变形行为, 得到了不同晶粒尺寸下的应力-应变曲线, 同时计算了各应力-应变曲线所对应的平均流变应力. 研究发现平均流变应力最大值出现在晶粒尺寸为14.85 nm时. 通过原子构型显示, 给出了典型的位错运动过程和晶界运动过程, 并分析了在不同晶粒尺寸下纳米多晶铜的塑性变形机理. 研究表明: 当晶粒尺寸大于14.85 nm时, 纳米多晶铜的变形机理以位错运动为主; 当晶粒尺寸小于14.85 nm时, 变形机理以晶界运动为主, 变形机理的改变是纳米多晶铜出现软化现象即反常Hall-Petch关系的根本原因. 通过计算结果分析, 建立了晶粒合并和晶界转动相结合的理想变形机理模型, 为研究射流大变形现象提供微观变形机理参考.     

多晶银纳米线拉伸变形的分子动力学模拟研究

纳米尺度金属Ag以其独特的导电和导热性,广泛应用于微电子、光电子学、催化等领域,特别是在纳米微电极和纳米器件方面的应用.本文采用分子动力学方法模拟了不同晶粒尺寸下多晶银纳米线的拉伸变形行为,详细分析了晶粒尺寸对多晶银纳米线弹性模量、屈服强度、塑性变形机理的影响.发现当晶粒尺寸小于13.49 nm时,多晶Ag纳米线呈现软化现象,出现反Hall-Petch关系,此时的塑性变形机理主要以晶界滑移、晶粒转动为主,变形后期形成五重孪晶;当晶粒尺寸大于13.49 nm时,塑性变形以位错滑移为主,变形后期产生大量的孪晶组织.     

Dislocation and diffusion deformation mechanisms in ultrafine grained materials and free volume role

The effect of average grain size on the mechanisms of polycrystal deformation are considered in the range of grain sizes from 1nm to 1cm. Critical grain sizes are selected. The activity of dislocation and diffusion mechanisms is analyzed. The deformation distribution in grains of different sizes is considered for a polycrystal as a whole within the grain size distribution.     

爆炸载荷下纳米晶铜晶粒度分布及影响因素研究

 采用爆炸动态加载使粗晶铜发生高应变率塑性大变形的方法制备了纳米晶铜。利用X射线衍射法对其晶粒度进行了检测,借助于LS-DYNA3D非线性有限元程序对试样变形过程进行了数值模拟,在此基础上对应变和应变率进行了统计,分析了宏、细观应变对晶粒细化程度的影响。结果表明：采用爆炸加载法可制备出纳米晶铜,平均晶粒度范围可有效控制在100 nm以内;爆炸加载过程中应变率高达10⁴ s^-1,应变的提高有利于晶粒细化;在爆炸加载方向晶粒度成不均匀分布。     

Nanocrystalline gold with small size: inverse Hall–Petch between mixed regime and super-soft regime

ABSTRACT

Molecular dynamics simulations were used to study the atomic mechanisms of deformation of nanocrystalline gold with 2.65–18?nm in grain size to explore the inverse Hall–Petch effect. Based on the mechanical responses, particularly the flow stress and the elastic-to-plastic transition, one can delineate three regimes: mixed (10–18?nm, dislocation activities and grain boundary sliding), inverse Hall-Petch (5–10?nm, grain boundary sliding), and super-soft (below 5?nm). As the grain size decreases, more grain boundaries present in the nanocrystalline solids, which block dislocation activities and facilitate grain boundary sliding. The transition from dislocation activities to grain boundary sliding leads to strengthening-then-softening due to grain size reduction, shown by the flow stress. It was further found that, samples with large grain exhibit pronounced yield, with the stress overshoot decrease as the grain size decreases. Samples with grain sizes smaller than 5?nm exhibit elastic-perfect plastic deformation without any stress overshoot, leading to the super-soft regime. Our simulations show that, during deformation, smaller grains rotate more and grow in size, while larger grains rotate less and shrink in size.     

晶体相场法模拟纳米晶材料反霍尔-佩奇效应的微观变形机理

采用晶体相场模型模拟获得了平均晶粒尺寸从11.61–31.32 nm的纳米晶组织, 研究了单向拉伸过程纳米晶组织的强化规律的微观变形机理. 模拟结果表明: 晶粒转动、晶界迁移等晶间变形行为是纳米晶材料的主要微观变形方式, 纳米晶尺寸减小, 有利于晶粒转动, 使屈服强度降低, 显示出反霍尔-佩奇效应.当纳米晶较小时, 变形量超过屈服点达到4%, 位错运动开启, 其对变形的直接贡献有限, 主要通过改变晶界结构而影响变形行为, 位错运动破坏三叉晶界, 引发晶界弯曲, 促进晶界迁移. 随纳米晶增大, 晶粒转动困难, 出现晶界锯齿化并发射位错的现象. 关键词： 晶体相场 纳米晶 反霍尔-佩奇效应 微观变形     

Deformation behaviour of ultrafine and nanosize-grained Mg alloy synthesized via mechanical alloying

Bulk Mg–5Al alloys were consolidated from powders that had been mechanically alloyed over different milling durations. The microstructural evolution, and physical and mechanical properties of the alloys were investigated. Mechanical measurements revealed a change in deformation behaviour after certain milling durations. At short milling duration, high yield strength was obtained through dislocation strengthening mechanisms predominantly by grain refinement and to a lesser extent by solid solution strengthening and particle dispersion strengthening. However, at longer milling durations, low yield strength was observed and the strengthening mechanisms at work in short milling durations appeared to be no longer effective. Enhanced ductility with no work hardening behaviour was observed in samples with a mean grain size of 45?nm. It appeared that the significantly large increase in the grain boundary regions played an important role in the room temperature deformation of the alloys. The possibility of a diminishing effect of the dislocation strengthening mechanisms and the onset of grain boundary deformation modes for the softening phenomenon and the absence of work hardening at some nanoscale grain sizes are discussed.     

纳晶铜晶粒尺寸对热导率的影响

用热压烧结法制备得到纳晶铜块体. 用激光法测定了不同温度下制备得到的纳晶铜块体的热导率, 并建立卡皮查热阻模型对样品热导率进行模拟. 通过对比, 模拟结果与实验数据基本一致. 随着热压烧结温度的升高, 纳晶铜晶粒尺寸也随之增大. 在900和700 ℃其热导率分别达到了最大和最小值且所对应的热导率分别为200.63和233.37 W·m^-1·K^-1, 各占粗晶铜块体热导率的53.4%和60.6%. 验证了纳晶铜热导率在一定的晶粒尺寸范围内具有尺寸效应, 随着晶粒尺寸的减小, 热导率逐渐减小.