Adsorption site, core level shifts and charge transfer on the Pd(1 1 1)-I(√3 × √3) surface

We use core level photoelectron spectroscopy and density functional theory (DFT) to investigate the iodine-induced Pd(1 1 1)-I(√3 × √3) structure formed at 1/3 ML coverage. From the calculations we find that iodine adsorbs preferentially in the fcc hollow site. The calculated equilibrium distance is 2.06 Å and the adsorption energy is 68 kcal/mol, compared to 2.45 Å and 54 kcal/mol in the atop position. The adsorption energy difference between fcc and hcp hollows is 1.7 kcal/mol. Calculated Pd 3d surface core level shift on clean Pd(1 l 1) is 0.30 eV to lower binding energy, in excellent agreement with our experimental findings (0.28-0.29 eV). On the Pd(1 1 1)-I(√3 × √3) we find no Pd 3d surface core level shift, neither experimentally nor theoretically. Calculated charge transfer for the fcc site, determined from the Hirshfeld partitioning method, suggests that the iodine atom remains almost neutral upon adsorption.     

Comparison of S, Pt, and Hf adsorption on NiAl(1 1 0)

First-principles periodic slab density-functional theory (DFT) calculations with a plane-wave basis are used to predict the properties of S, Pt, and Hf adsorption on NiAl(1 1 0). Stable adsorption sites are identified, and adsorbate binding energies and structures are predicted. We find that while S adsorbs in a threefold site, the metals prefer to adsorb in the Ni-Ni twofold bridge site. The latter finding is consistent with scanning tunneling microscopy experiments for adsorption of various transition metals on NiAl(1 1 0) by Ho and coworkers. S is predicted to easily diffuse between threefold sites. We find that Pt and Hf both induce significant changes in the local surface structure, changing twofold bridge sites into fourfold coordination sites by drawing next-nearest-neighbor atoms nearly equidistant with the nearest-neighbor atoms. We find Pt favors interaction with Al slightly more than Ni, while Hf shows a particularly strong affinity for Ni compared to Al. We also predict that Hf may diffuse one-dimensionally along Ni rows with a barrier of ≈0.6 eV.     

A theoretical investigation on Pt3Sn(1 0 2) surface alloy and CO-Pt3Sn(1 0 2) system

The adsorption properties of CO on experimentally verified stepped Pt₃Sn(1 0 2) surface were investigated using quantum mechanical calculations. The two possible terminations of Pt₃Sn(1 0 2) were generated and on these terminations all types of possible adsorption sites were determined. The adsorption energies and geometries of the CO molecule for all those sites were calculated. The most favorable sites for adsorption were determined as the short bridge site on the terrace of pure-Pt row of the mixed-atom-ending termination, atop site at the step-edge of the pure row of pure-Pt-ending termination and atop site at the step-edge of the pure-Pt row of the mixed-atom-ending termination. The results were compared with those for similar sites on the flat Pt₃Sn(1 1 0) surface considering the fact that Pt₃Sn(1 0 2) has terraces with (1 1 0) orientation. The LDOS analysis of bare sites clearly shows that there are significant differences between the electronic properties of Pt atoms at stepped Pt₃Sn(1 0 2) surface and the electronic properties of Pt atoms at flat (1 1 0) surface, which leads to changes in the CO bonding energies of these Pt atoms. Adsorption on Pt₃Sn(1 0 2) surface is in general stronger compared to that on Pt₃Sn(1 1 0) surface. The difference in adsorption strength of similar sites on these two surface terminations is a result of stepped structure of Pt₃Sn(1 0 2). The local density of states (LDOS) of the adsorbent Pt and C of adsorbed CO was utilized. The LDOS of the surface metal atoms with CO-adsorbed atop and of their bare state were compared to see the effect of CO chemisorption on the electron density distribution of the corresponding Pt atom. The downward shift in energy peak in the LDOS curves as well as changes in the electron densities of the corresponding energy levels indicate the orbital mixing between CO molecular orbitals and metal d-states. The present study showed that the adsorption strength of the sites has a direct relation with their LDOS profiles.     

Adsorption site preference of CO2 on the Pt(1 0 0) surface by ab initio calculations

This paper investigates the adsorption sites and electronic structure of the adsorption of CO₂ on the Pt(1 0 0) surface by ab initio periodic density functional theory (DFT) methods. Several parallel and vertical adsorption sites are examined in detail. The results show that the adsorption energy for the atop hollow horizontal (thh) site is 0.34 eV. However, other sites only have small binding energies and these values are very close. For an atop hollow horizontal site, the calculated elecronic interaction is contributed to not only the Pt-O atoms, but also Pt-C atoms. So the results indicate that the thh site is the most favorable and stable.     

Theoretical simulation of butane isomers adsorption on a Pt(1 0 0) surface

The adsorption of the two butane isomers on Pt(1 0 0) has been characterised with use of density functional simulations. The adsorption energies corresponding to various adsorption configurations were evaluated in good agreement with experimental values. Limited changes of the molecular structure were evidenced. The C-H bond length increases at a degree depending on the surface-hydrogen distance, while the C-C bond length remains similar to that of the free molecule. The surface on-top Pt sites exert a preferential attraction on the molecule, probably through the interaction with the H atoms. The local density of states curves around H as well as C of the adsorbed molecules show dispersed states below the metal Fermi level indicating a molecule-Pt mixing demonstrating a chemical interaction.     

Electrochemical properties of palladium adlayers on Pt(1 0 0) substrates

The formation of submonolayers of palladium on well-defined Pt(1 0 0) electrodes is described. It has been found that the adsorption of NO at open circuit and its further reductive stripping enable the possibility to prepare Pt(1 0 0) electrodes fully covered by the first palladium layer, without contributions coming from palladium in the subsequent layers. This method enables a better characterization of the palladium islands formed in the submonolayer range. The CO displacement method points out that hydrogen and anion adsorption play a role in the charge transfer processes involved in the voltammetric profile. The analysis of the charge-potential curves is used to determine the values of the potentials of zero total charge (pztc) of the different adelectrodes. The pztc diminishes almost linearly with palladium coverage, this shift being related to increasing anion adsorption at low potentials. Adsorbed palladium does not electrocatalyze the oxidation of adsorbed CO.     

Effects of metal-support interactions on the electronic structures of metal atoms adsorbed on the perfect and defective MgO(1 0 0) surfaces

The electronic structures of Ni, Pd, Pt, Cu, and Zn atoms adsorbed on the perfect MgO(1 0 0) surface and on a surface oxygen vacancy have been studied at the DFT/B3LYP level of theory using both the bare cluster and embedded cluster models. Ni, Pd, Pt, and Cu atoms can form stable adsorption complexes on the regular O site of the perfect MgO(1 0 0) surface with the binding energies of 19.0, 25.2, 46.7, and 17.3 kcal/mol, respectively, despite very little electron transfer between the surface and the metal atoms. On the other hand, adsorptions of Ni, Pd, Pt, and Cu atoms show strong interaction with an oxygen vacancy on the MgO(1 0 0) surface by transferring a significant number of electron charges from the vacancy to the adsorbed metal atoms and thus forming ionic bonds with the vacancy site. These interactions on the vacancy site for Ni, Pd, Pt, and Cu atoms increase the binding energies by 25.8, 59.7, 85.2, and 19.1 kcal/mol, respectively, compared to those on the perfect surface. Zn atom interacts very weakly with the perfect surface as well as the surface oxygen vacancy. We observed that the interaction increases from Ni to Pt in the same group and decreases from Ni to Zn in the same transition metal period in both perfect and vacancy systems. These relationships correlate well with the degrees of electron transfer from the surface to the adsorbed metal atom. The changes in the ionization potentials of the surface also correlate with the adsorption energies or degrees of electron transfers. Madelung potential is found to have significant effects on the electronic properties of metal atom adsorptions on the MgO(1 0 0) surface as well as on an oxygen vacancy, though it is more so for the latter. Furthermore, the Madelung potential facilitates electron transfer from the surface to the adsorbed metal atoms but not in the other direction.     

Density functional theory investigation of CN on Cu(1 1 1), Ni(1 1 1) and Ni(1 0 0)

The adsorption of CN on Cu(1 1 1), Ni(1 1 1) and Ni(1 0 0) has been investigated using density functional theory (DFT). While experimental studies of CN on Cu(1 1 1) show the molecular axis to be essentially parallel to the surface, the normally-preferred DFT approach using the generalised gradient approximation (GGA) yields a lowest energy configuration with the C-N axis perpendicular to the surface, although calculations using the local density approximation (LDA) do indicate that the experimental geometry is energetically favoured. The same conclusions are found for CN on Ni(1 1 1); on both surfaces bonding through the N atom is always unfavourable, in contrast to some earlier published results of ab initio calculations for Ni(1 1 1)/CN and Ni(1 0 0)/CN. The different predictions of the GGA and LDA approaches may lie in subtly different relative energies of the CN 5σ and 1π orbitals, a situation somewhat similar to that for CO adsorbed on Pt(1 1 1) which has proved challenging for DFT calculations. On Ni(1 0 0) GGA calculations favour a lying-down species in a hollow site in a geometry rather similar to that found experimentally and in GGA calculations for CN on Ni(1 1 0).     

Adsorption of water on TiN (1 0 0), (1 1 0) and (1 1 1) surfaces: A first-principles study

We use first-principles density functional theory-based calculations in the analysis of the interaction of H₂O with (1 0 0), (1 1 0) and (1 1 1) surfaces of TiN, and develop understanding in terms of surface energies, polarity of the surface and chemistry of the cation, through comparison with H₂O adsorption on ZrN. While water molecule physisorbs preferentially at Ti site of (1 0 0) and (1 1 1) surfaces, it adsorbs dissociatively on (1 1 0) surface of TiN with binding stronger than almost 1.32 eV/molecule. Our analysis reveals the following general trends: (a) surfaces with higher energies typically lead to stronger adsorption, (b) dissociative adsorption of H₂O necessarily occurs on a charge neutral high energy surface and (c) lower symmetry of the (1 1 0) plane results in many configurations of comparable stability, as opposed to the higher symmetry (1 0 0) and (1 1 1) surfaces, which also consistently explain the results of H₂O adsorption on MgO available in literature. Finally, weaker adsorption of H₂O on TiN than on ZrN can be rationalized in terms of greater chemical stability of Ti arising from its ability to be in mixed valence.     

Comparative DFT study of the adsorption of 1,3-butadiene, 1-butene and 2-cis/trans-butenes on the Pt(1 1 1) and Pd(1 1 1) surfaces

The interaction of 1,3-butadiene, 1-butene and 2-cis/trans-butenes on the Pt(1 1 1) and Pd(1 1 1) surfaces has been studied with density functional theory methods (DFT). The same most stable adsorption modes have been found on both metal surfaces with similar adsorption energies. For 1,3-butadiene the 1,2,3,4-tetra-σ adsorption structure is shown to be the most stable one, in competition with a 1,4-metallacycle-type mode, which is only less stable by 10-12 kJ mol⁻¹. On Pt(1 1 1) these total energy calculations were combined with simulations of the vibrational spectra. This confirms that the 1,2,3,4-tetra-σ adsorption is the most probable adsorption structure, but cannot exclude the 1,4-metallacycle as a minority species. Although similar in type and energy, the adsorption on the Pd(1 1 1) surface shows a markedly different geometry, with a smaller molecular distortion upon adsorption. The most stable adsorption structure for the butene isomers is the di-σ-mode. Similarly to the case of the 1,3-butadiene, the adsorption geometry is closer to the gas phase one on Pd than on Pt, hence explaining the different spectroscopic results, without the previously assumed requirement of a different binding mode. Moreover the present study has shown that the different selectivity observed on Pt(1 1 1) and Pd(1 1 1) for the hydrogenation reaction of butadiene cannot be satisfactory explained by the single comparison of the relative stabilities of 1,3-butadiene and 1-butene on these metals.     

Measurement of the surface charge density of CO-saturated Pt(1 1 1) electrodes as a function of potential: the potential of zero charge of Pt(1 1 1)

From measurements of the charge flowing upon immersion, at controlled potential, of a CO-covered Pt(1 1 1) electrode in a 0.1 M HClO₄ solution, the corresponding surface charge density vs. potential curve was obtained, and from this the potential of zero charge (pzc) of the CO-covered Pt(1 1 1) electrode. From these data it was estimated that the error incurred when the potential of zero total charge (pztc) of Pt(1 1 1) electrodes is determined by the CO-charge displacement method is of approximately 50 mV at pH 1 and of approximately 90 mV at pH 3. Furthermore, the experimentally determined pzc of the CO-covered Pt(1 1 1) electrode has allowed us to make an estimation of the potential of zero free charge (pzfc) of Pt(1 1 1) electrodes.     

A density functional study of atomic oxygen and water molecule adsorption on Ni(1 1 1) and chromium-substituted Ni(1 1 1) surfaces

Density functional theory (DFT) for generalized gradient approximation calculations has been used to study the adsorption of atomic oxygen and water molecules on Ni(1 1 1) and different kind of Ni-Cr(1 1 1) surfaces. The fcc hollow site is energetically the most favorable for atomic oxygen adsorption and on top site is favorable for water adsorption. The Ni-Cr surface has the highest absorption energy for oxygen at 6.86 eV, followed by the hcp site, whereas the absorption energy is 5.56 eV for the Ni surface. The Ni-O bond distance is 1.85 Å for the Ni surface. On the other hand, the result concerning the Ni-Cr surface implies that the bond distances are 1.93-1.95 Å and 1.75 Å for Ni-O and Cr-O, respectively. The surface adsorption energy for water on top site for two Cr atom substituted Ni-Cr surface is 0.85 eV. Oxygen atoms prefer to bond with Cr rather than Ni atoms. Atomic charge analysis demonstrates that charge transfer increases due to the addition of Cr. Moreover, a local density of states (LDOS) study examines the hybridization occurring between the metal d orbital and the oxygen p orbital; the bonding is mainly ionic, and water bonds weakly in both cases.     

The chemisorption of pentacene on Si(0 0 1)-2 × 1

Adsorption structures of the pentacene (C₂₂H₁₄) molecule on the clean Si(0 0 1)-2 × 1 surface were investigated by scanning tunneling microscopy (STM) in conjunction with density functional theory calculations and STM image simulations. The pentacene molecules were found to adsorb on four major sites and four minor sites. The adsorption structures of the pentacene molecules at the four major sites were determined by comparison between the experimental and the simulated STM images. Three out of the four theoretically identified adsorption structures are different from the previously proposed adsorption structures. They involve six to eight Si-C covalent chemical bonds. The adsorption energies of the major four structures are calculated to be in the range 67-128 kcal/mol. It was also found that the pentacene molecule hardly hopped on the surface when applying pulse bias voltages on the molecule, but was mostly decomposed.     

The orbital interaction of adsorbed CO on NiO (0 0 1;1 1 1) surface: A periodic density functional theory study

The DOS structures of NiO (0 0 1;1 1 1) surfaces and CO adsorption on these surfaces have been studied with spin-unrestricted and periodic DFT (B3LYP) methods. On the basis of the analysis of orbital interaction on DOSs, the bonding properties of surface atomic orbitals have also been interpreted. It is found that CO adsorption on (0 0 1) and (1 1 1) surfaces have different mechanisms and adsorption energies. A four-electron σ orbital interaction is produced when CO is adsorbed on NiO (1 1 1), CO adsorbption on NiO (1 1 1) surface is obviously stronger than that on surface (0 0 1). It is easy for the clean NiO (1 1 1) surface to reconstruct to (2 × 2) structure, but the surface covered by CO does not undergo such a reconstruction.     

Coadsorption of CN and O on Cu (1 0 0) surface: A density functional study

The adsorption of cyanide (CN) or oxygen atom, as well as the coadsorption of CN + O on Cu (1 0 0) surface is studied by using density functional theory (DFT) and the cluster model method. Cu₁₄ cluster is used to simulate the surface. Perpendicular and parallel bonding geometries of CN adsorbed on Cu (1 0 0) surface are considered, respectively. The present calculations show that the CN may be absorbed on top and bridge sites by carbon atom of cyanide (C-down), and C-down on top site is the most favorable. The adsorbed C-N stretch frequencies compared with that of the gaseous CN species are all red-shifted, except the C-down on top site. The charge transfer from the surface to the CN species leads to an increase in work function for the Cu surface. The oxygen atom adsorbed on the four-fold hollow site of Cu (1 0 0) is the most favorable, and is consistent with the experimental study. The coadsorption of O at a four-fold hollow site tends to block adsorption of CN at the nearby sites. If O coverage increases, the CN may be adsorbed on the top and bridges sites with the C-down model. The reaction CN + O → OCN on the Cu (1 0 0) is predicted to be exothermic, and formed OCN species may be stably absorbed on the Cu (1 0 0).     

Anomalous adsorption of Cs on Pt(1 1 1)

The adsorption of Cs on Pt(1 1 1) surfaces and its reactivity toward oxygen and iodine for coverages θ_Cs?0.15 is reported. These surfaces show unusual “anomalous” behavior compared to higher coverage surfaces. Similar behavior of K on Pt(1 1 1) was previously suggested to involve incorporation of K into the Pt lattice. Despite the larger size of Cs, similar behavior is reported here. Anomalous adsorption is found for coverages lower than 0.15 ML, at which point there is a change in the slope of the work function. Thermal Desorption Spectroscopy (TDS) shows a high-temperature Cs peak at 1135 K, which involves desorption of Cs⁺ from the surface.The anomalous Cs surfaces and their coadsorption with oxygen and iodine are characterized by Auger Electron Spectroscopy (AES), TDS and Low Electron Energy Diffraction (LEED). Iodine adsorption to saturation on Pt(1 1 1)(anom)-Cs give rise to a sharp LEED pattern and a distinctive work function increase. Adsorbed iodine interacts strongly with the Cs and weakens the Cs-Pt bond, leading to desorption of Cs_xI_y clusters at 560 K. Anomalous Cs increases the oxygen coverage over the coverage of 0.25 ML found on clean Pt. However, the Cs-Pt bond is not significantly affected by coadsorbed oxygen, and when oxygen is desorbed the anomalous cesium remains on the surface.     

A DFT + U description of oxygen vacancies at the TiO2 rutile (1 1 0) surface

Experimental observations indicate that removing bridging oxygen atoms from the TiO₂ rutile (1 1 0) surface produces a localised state approximately 0.7 eV below the conduction band. The corresponding excess electron density is thought to localise on the pair of Ti atoms neighbouring the vacancy; formally giving two Ti³⁺ sites. We consider the electronic structure and geometry of the oxygen deficient TiO₂ rutile (1 1 0) surface using both gradient-corrected density functional theory (GGA DFT) and DFT corrected for on-site Coulomb interactions (GGA + U) to allow a direct comparison of the two methods. We show that GGA fails to predict the experimentally observed electronic structure, in agreement with previous uncorrected DFT calculations on this system. Introducing the +U term encourages localisation of the excess electronic charge, with the qualitative distribution depending on the value of U. For low values of U (?4.0 eV) the charge localises in the sub-surface layers occupied in the GGA solution at arbitrary Ti sites, whereas higher values of U (?4.2 eV) predict strong localisation with the excess electronic charge mainly on the two Ti atoms neighbouring the vacancy. The precise charge distribution for these larger U values is found to differ from that predicted by previous hybrid-DFT calculations.     

Comparative study of H2 adsorption on W(1 0 0)-c(2 × 2)Cu and W(1 0 0): Surface alloying effects

The interactions of H and H₂ with W(1 0 0)-c(2 × 2)Cu and W(1 0 0) have been investigated through density functional theory (DFT) calculations to elucidate the effect of Cu atoms on the reactivity of the alloy. Cu atoms do not alter the attraction towards top-W sites felt by H₂ molecules approaching the W(1 0 0) surface but make dissociation more difficult due to the rise of late activation barriers. This is mainly due to the strong decrease in the stability of the atomic adsorbed state on bridge sites, the most favourable ones for H adsorption on W(1 0 0). Still, our results show unambiguously that H₂ dissociative adsorption on perfect terraces of the W(1 0 0)-c(2 × 2)Cu surface is a non-activated process which is consistent with the high sticking probability found in molecular beam experiments at low energies.     

Theoretical study of CO and Pb adsorption on the Ni(1 1 1) and Ni3Al(1 1 1) surfaces

Adsorption of CO molecules and Pb atoms on the Ni(1 1 1) and Ni₃Al(1 1 1) substrates is studied theoretically within an ab initio density-functional-theory approach. Stable adsorption sites and the corresponding adsorption energies are first determined for stoichiometric surfaces. The three-fold hollow sites (fcc for Pb and hcp for CO) are found most favourable on both substrates. Next, the effect of surface alloying by a substitution of selected topmost substrate atoms by Pb or Ni atoms on the adsorption characteristics is investigated. When the surface Al atoms of the Ni₃Al(1 1 1) substrate are replaced by Ni atoms, the Pb and CO adsorption energies approach those for a pure Ni(1 1 1) substrate. The Pb alloying has a more substantial effect. On the Ni₃Al(1 1 1) substrate, it reduces considerably adsorption energy of CO. On the Ni(1 1 1) substrate, CO binding strengthens slightly upon the formation of the Ni(1 1 1)p(2×2)-Pb surface alloy, whereas it weakens drastically when the Ni(1 1 1)-Pb surface alloy is formed.     

Density-functional study of the CO adsorption on ferromagnetic Co(0 0 0 1) and Co(1 1 1) surfaces

The regular CO overlayers at coverage θ = 1/3 adsorbed on the (0 0 0 1) surface of hcp Co and (1 1 1) surface of fcc Co are studied by first-principles density-functional theory with the exchange-correlation component in the PBE form. Adsorption in atop, bridge, and three-fold hcp or fcc position are considered. The adsorption energies, CO stretching frequencies, geometry, work function, and local magnetic moments are studied, and, when possible, compared with experimental or theoretical data. Particularly, we show that the recently proposed correction to adsorption energy of CO prefers correctly the atop adsorption site, whereas the remaining sites are almost degenerate in energy. The CO molecule lowers magnetization on neighbouring Co atoms, and the effect decreases with the adsorption site coordination. We show, however, that this trend is not the result of the different C-Co separation at different adsorption sites. A very small magnetic moment appears on CO that couples antiferromagnetically to Co. Most results are very similar for the Co(0 0 0 1) and Co(1 1 1) surfaces.