4-benzyl pyridinium dihydrogenmonophosphate C6H5CH2C5H4NHH2PO4 : Single-crystal structure and its conductivity in polycrystalline form

The salt 4-benzyl pyridinium dihydrogenmonophosphate is monoclinic P2₁/c with the following unit cell dimensions: ; ; ; and β=97.328(11). Also, , D_x=1.403, , F(000)=560; ; and R=0.0495 and R_w=0.0964 for 3733 independent reflections. The structure consists of infinite parallel two-dimensional planes built of H₂PO₄⁻ anions and C₆H₅CH₂C₅H₄NH⁺ cations mutually connected by strong O-H ?O and N-H ?O hydrogen bonding. There are no contacts other than the normal Van der Waals interactions between the layers. The conductivity relaxation parameters associated with some H⁺ conduction have been determined from an analysis of the spectrum measured in a wide temperature range.     

Relaxor behavior of K0.5La0.5Bi2Ta2O9 ceramics

Potassium lanthanum bismuth tantalate (K_0.5La_0.5Bi₂Ta₂O₉), a new relaxor ferroelectric was synthesized via the solid-state reaction route. X-ray structural studies along with Rietveld refinement confirmed it to be an n=2 member of the Aurivillius family of oxides and the refined lattice parameters are , and . The appearance of 1/2{h00} and 1/2{hk0} type superlattice reflections in the electron diffraction patterns reflected the presence of ordered polar regions. A broad dielectric peak associated with frequency dependent dielectric maximum temperature was observed. The value of the diffuseness parameter γ=1.93, obtained from the fit of a modified Curie-Weiss law established the relaxor nature of the title compound. The dielectric relaxation obeyed the Vogel-Fulcher relation wherein and . The relaxor behavior was attributed to the local polar ordering on A-sites.     

Crystal field effect and geometric frustration in Er2Ti2O7 —an XY antiferromagnetic pyrochlore

Magnetic susceptibility of powder Er₂Ti₂O₇ (ErT) is measured between 300 K and 80 K. shows a Curie-Weiss (CW) type behaviour with   ErTiO_3.5 and . A crystal field (CF) analysis of our experimental data, g-values (g_∥=0.27 and g_⊥=7.8) and the positions of two CF levels (reported earlier from an inelastic neutron scattering study) provide CF parameters and CF levels of the ground ⁴I_15/2 and excited multiplets of ErT. The theoretical follows a CW-type behaviour, with . Single-ion magnetic anisotropy (χ_⊥−χ_∥) is 9500×10⁻⁶ emu/mol ErTiO_3.5 at 300 K, which increases by ∼54 times at 10 K and ErT resembles an XY planar system. It can be inferred from CF analysis that the earlier observed change of from −13 K to −22 K below 50 K is not due to the CF effect. Nuclear hyperfine (HF) levels of ¹⁶⁷ErT and ¹⁶⁶ErT are calculated and the theoretical curve of vs. T (K) for T<T_N matches the observed results. Mössbauer lines expected for ¹⁶⁶ErT are also predicted.     

Theoretical study of local lattice structure of Mn in perovskite fluorides A2MF4 (A=K, Rb; M=Mg, Zn, Cd) series

A theoretical method for investigating the inter-relation between the molecular structure and electronic structure has been established on the basis of the 252×252 complete energy matrices for a 3d⁵ configuration ion in a tetragonal ligand field. By means of this method, which is independent of the X-ray diffraction, the local structure of the paramagnetic Mn²⁺ ion in perovskite fluorides A₂MF₄ (A=K, Rb; M=Zn, Mg, Cd) are determined directly by analyzing the EPR spectrum of octahedral Mn²⁺ center in A₂MF₄ crystals and the optical absorption spectrum of the (MnF₆)⁴⁻ cluster. It is shown that, comparing with the octahedral cubic structure, the local micro-structure in the vicinity of Mn²⁺ displays an elongated distortion when and a compressed distortion when , and ΔR vs. as well as ΔR vs. in the distortion region is, respectively, approximately linear. Simultaneously, the theoretical zero-field-splitting parameters , and are in good agreement with the experimental values.     

The high quality ZnO growth on c-Al2O3 substrate with Cr2O3 buffer layer using plasma-assisted molecular beam epitaxy

High quality epitaxial ZnO films were grown on c-Al₂O₃ substrates with Cr₂O₃ buffer layer by plasma-assisted molecular beam epitaxy (P-MBE). The hexagonal crystalline Cr₂O₃ layer was formed by oxidation of the Cr-metal layer deposited on the c-Al₂O₃ substrate using oxygen plasma. The epitaxial relationship was determined to be ZnO//Cr₂O₃//Cr//Al₂O₃ and ZnO//Cr₂O₃//[0 0 1]Cr//Al₂O_3. The Cr₂O₃ buffer layer was very effective in improving the surface morphology and crystal quality of the ZnO films. The photoluminescence spectrum showed the strong near band-edge emissions with the weak deep-level emission, which implies high optical quality of the ZnO films grown on the Cr₂O₃ buffer.     

The effect of the Bi source on optical properties of Bi2Te3 nanostructures

nanostructures were synthesized by using different Bi sources via a simple solvothermal process, in which and BiCl₃ were used as the Bi sources. Optical properties of nanostructures prepared with and BiCl₃ as the Bi sources were investigated by micro-Raman spectroscopy. The Raman scattering spectrum of hexagonal nanoplates prepared by using as the Bi source shows that the infrared (IR) active mode A_1u, which must be odd parity and is Raman forbidden for bulk crystal due to its inversion symmetry, is greatly activated and shows up clearly in the Raman scattering spectrum. We attribute the appearance of the infrared active A_1u mode in the Raman spectrum to crystal symmetry breaking of hexagonal nanoplates. However, the Raman scattering spectrum of nanostructures with irregular shape prepared by using as the Bi source only exhibits the two characteristic Raman modes of crystals. Micro-Raman measurements on nanostructures with different morphologies offer us a potential way to tailor optical properties of nanostructures by controlling the morphologies of the nanostructures, which is very important for practical applications of nanostructures in thermoelectric devices.     

Thermal infrared cross-sections of C2F6 at atmospheric temperatures

Spectral absorption cross-sections, k_ν (), have been measured in the 8.0 and bands of C₂F₆. Temperature and total (N₂-broadening) pressure have been varied to represent the conditions specified in various models of the terrestrial atmosphere so that the absorption cross-sections can be applied directly to the optical remote-sensing of C₂F₆ in the atmosphere. The measured absolute intensities of the 8.0 and the bands are (1.636±0.003)×10⁻¹⁶ and (, respectively.     

Preparation-dependent properties of Ca(Cu,Mn)7O12 CMR materials

Both magnetic ordering temperatures and lattice constants were observed to be a function of preparation temperature for single-phase CaCuMn₆O₁₂ CMR ceramics of the same cation, oxygen composition and crystal structure. It was found for the first time that higher preparation temperatures result in a linear increase of a cubic cell parameter a, , and in a sharp decrease of magnetic ordering temperatures , by about , for quenched samples. High resolution NPD experiments have shown the presence of antisite defects resulting in partial occupation of octahedral (8c) sites by Cu²⁺ at higher preparation temperatures as never assumed for an ideal structure. The data obtained give a new insight to the problem of functional properties reproducibility suggesting stronger requirements for the production control of CMR materials.     

Reverse Monte Carlo simulations and Raman scattering of an amorphous GeSe4 alloy produced by mechanical alloying

The short and intermediate range order of an amorphous GeSe₄ alloy produced by Mechanical Alloying were studied by Reverse Monte Carlo simulations of its X-ray total structure factor and Raman scattering. The simulations were used to compute the , and partial distribution functions and the , and partial structure factors. We calculated the coordination numbers and interatomic distances for the first and second neighbors. The data obtained indicate that the structure of the alloy has important differences when compared to alloys prepared by other techniques. There are a high number of Se-Se pairs in the first shell, and some of the tetrahedral units formed seemed to be connected by Se-Se bridges.