Variable-temperature FT-IR studies on the thermodynamics of carbon dioxide adsorption on a faujasite-type H-Y zeolite

Adsorption of carbon dioxide on a faujasite-type H-Y zeolite (Si:Al = 2.6:1) was studied by variable-temperature (200-290 K range) infrared spectroscopy. Adsorbed CO₂ molecules interact with the Brønsted acid Si(OH)Al groups located inside the zeolite supercage, bringing about a characteristic bathochromic shift of the O-H stretching mode from 3645 cm⁻¹ (free OH group) to 3540 cm⁻¹ (hydrogen-bonded CO₂ adsorption complex). Simultaneously, the asymmetric (ν₃) mode of adsorbed CO₂ is observed at 2353 cm⁻¹. From the observed variation of the integrated intensity of the 3645 and 2353 cm⁻¹ IR absorption bands upon changing temperature, corresponding values of standard adsorption enthalpy and entropy were found to be ΔH° = −28.5(±1) kJ mol⁻¹ and ΔS° = −129(±10) J mol⁻¹ K⁻¹. Comparison with the reported values of ΔH° for CO₂ adsorption on other zeolites is briefly discussed.     

Infrared spectra and stability of CO and H2O sorption over Ag-exchanged ZSM-5 zeolite: DFT study

The infrared spectra and stability of CO and H₂O sorption over Ag-exchanged ZSM-5 zeolite were investigated by using density function theory (DFT). The changes of NBO charge show that the electron transfers from CO molecule to the Ag⁺ cation to form an σ-bond, and it accompanies by the back donation of d-electrons from Ag⁺ cation to the CO (π*) orbital as one and two CO molecules are adsorbed on Ag-ZSM-5. The free energy changes ΔG, −5.55 kcal/mol and 6.52 kcal/mol for one and two CO molecules, illustrate that the Ag⁺(CO)₂ complex is unstable at the room temperature. The vibration frequency of C-O stretching of one CO molecule bonded to Ag⁺ ion at 2211 cm⁻¹ is in good agreement with the experimental results. The calculated C-O symmetric and antisymmetric stretching frequencies in the Ag⁺(CO)₂ complex shift to 2231 cm⁻¹ and 2205 cm⁻¹ when the second CO molecule is adsorbed. The calculated C-O stretching frequency in CO-Ag-ZSM-5-H₂O complex shifts to 2199 cm⁻¹, the symmetric and antisymmetric O-H stretching frequencies are 3390 cm⁻¹ and 3869 cm⁻¹, respectively. The Gibbs free energy change (ΔGH₂O) is −6.58 kcal/mol as a H₂O molecule is adsorbed on CO-Ag-ZSM-5 complex at 298 K. The results show that CO-Ag-ZSM-5-H₂O complex is more stable at room temperature.     

Local vibration assisted molecular configurations in poly(vinylidene fluoride) of ordered ferroelectric phase in N,N-dimethylformamide

Amide-based polymer liquids are important for developing biological and optical colloids or nanofluids. Functionalized properties arise from specific molecular structures. In this investigation, we report model molecular configurations of a polymer liquid, 0.3 g/L poly(vinylidene fluoride) (PVF₂) dissolved in liquid N,N-dimethylformamide (DMF), based on the characteristic IR vibration bands. Peculiarly, a ferroelectric β-PVF₂ phase reorders on a linear configuration in support with the DMF molecules, showing a characteristic band 840 cm^− 1 (CH₂ rocking and CF₂ asymmetric stretching) with the trans band at 1275 cm^− 1. Four CO stretching bands ν₁⁰, ν₁¹, ν₁², and ν₁³ of 1650, 1675, 1725, and 1760 cm^− 1 (bandwidth Δν_½ = 180 cm^− 1 in the four bands) arise in four major configurations of DMF-PVF₂ pairs (or derivatives). Only one prominent ν₁⁰ band 1660 cm^− 1 (Δν_½ = 75 cm^− 1) incurs with a shoulder ν₁¹ of 1725 cm^− 1 (Δν_½ = 25 cm^− 1) in two DMF configurations. A ferroelectric field cased in presence of β-PVF₂ leads to enhance IR absorption by as much as an order of magnitude. It leads to converging non-bonding electron density on the amide moiety.     

The structures of physisorbed and chemisorbed formic acid on Si(1 1 1)-7 × 7

The reaction of formic acid on Si(1 1 1)-7 × 7 was investigated using X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS) and high-resolution electron energy loss spectroscopy (HREELS). The hydroxyl and carbonyl O 1s core levels of chemisorbed formic acid display chemical shifts of 2.4 and 0.2 eV respectively, compared with those of physisorbed molecules. The HREELS spectra of chemisorbed formic acid show the absence of stretching and bending modes of the O-H bond, the appearance of Si-H (2089 cm⁻¹) and the Si-O (680 cm⁻¹) stretching modes and the retained stretching mode of CO at 1703 cm⁻¹. Our results clearly suggest that formic acid dissociates to form monodentate formate species and H-atom on the adatom-rest atom pair of Si(1 1 1)-7 × 7.     

Infrared spectroscopy on size-controlled synthesized Pt-based nano-catalysts

Pt, Ru and Pt/Ru nano-particles, synthesized in ethylene glycol solutions, are studied using infrared (IR) spectroscopy and high resolution transmission electron microscopy (HRTEM). The synthesis method allows the control of the mono- and bi-metallic catalyst particle sizes between 1 and 5.5 nm. The IR spectra of CO adsorbed (CO_ads) on the Pt, Ru and bi-metallic Pt/Ru colloids are recorded as a function of the particle size. The stretching frequency of CO_ads depends on the particle size and composition. Strong IR bands due to the stretching vibration of CO_ads are observed between 2010 and 2050 cm⁻¹ for the Pt nano-particles, while two IR bands between 2030 and 2060 cm⁻¹ for linear bonded CO_ads, and at lower wavenumbers between 1950 and 1980 cm⁻¹ for bridged bonded CO_ads, are found for the Ru particles. The IR spectra for the Pt/Ru nano-sized catalyst particles show complex behaviour. For the larger particles (>2 ± 0.5 nm), two IR bands representative of CO_ads on Ru and Pt-Ru alloy phases, are observed in the range of 1970-2050 cm⁻¹. A decrease in the particle size results in the appearance of a third band at ∼2020 cm⁻¹, indicative of CO_ads on Pt. The relative intensity of the band for CO_ads on the Pt-Ru alloy vs. the Pt phase decreases with decreasing particle size. These results suggest that Ru is partially dissolved in the Pt lattice for the larger Pt/Ru nano-particles and that a separate Ru phase is also present. A Pt-Ru alloy and Ru phase is observed for all Pt/Ru particles prepared in this work. However, a decrease in particle size results in a decrease of the number of Pt and Ru atoms in the Pt-Ru alloy phase, as they are increasingly present as single Pt and Ru phases.     

Hydrogen adsorption on the faujasite-type zeolite Mg-X: An IR spectroscopic and thermodynamic study

Hydrogen adsorption (physisorption) on the faujasite-type zeolite Mg-X was studied by means of variable-temperature (80-140 K) FT-IR spectroscopy. Perturbation of the adsorbed H₂ molecules by the cationic adsorbing centres of the zeolite renders the H-H stretching mode IR active, at 4065 cm⁻¹. Simultaneous measurement of IR absorbance and hydrogen equilibrium pressure, for a series of spectra recorded at the increasing temperature, allowed standard adsorption enthalpy and entropy to be determined. They resulted to be ΔH⁰ = −13 kJ mol⁻¹ and ΔS⁰ = −114 J mol⁻¹ K⁻¹, respectively. Both, spectroscopic and thermodynamic results are discussed in the broader context of corresponding data for hydrogen adsorption on other alkali and alkaline-earth cation exchanged zeolites, showing that, while an approximate correlation exists between ΔH⁰ and H-H stretching frequency, deviations can be expected for the case of zeolites containing small metal cations.     

Adsorption states of NO on the Pt(1 1 1) step surface

Using infrared reflection absorption spectroscopy (IRAS) and scanning tunneling microscopy (STM), we investigated the adsorption states of NO on the Pt(9 9 7) step surface. At 90 K, we observe three N-O stretching modes at 1490 cm⁻¹, 1631 cm⁻¹ and 1700 cm⁻¹ at 0.2 ML. The 1490 cm⁻¹ and 1700 cm⁻¹ peaks are assigned to NO molecules at fcc-hollow and on-top sites of the terrace, respectively. The 1631 cm⁻¹ peak is assigned to the step NO species. In the present STM results, we observed that NO molecules were adsorbed at the bridge sites of the step as well as fcc-hollow and on-top sites of the terrace. To help with our assignments, density functional theory calculations were also performed. The calculated results indicate that a bridge site of the step is the most stable adsorption site for NO, and its stretching frequency is 1607 cm⁻¹. The interactions between NO species at different sites on Pt(9 9 7) are also discussed.     

Carbon monoxide adsorption on Pd-deposited Cu(1 1 0) surface: Infrared reflection absorption and temperature programmed desorption studies

We investigated carbon monoxide (CO) adsorption and desorption behaviors on 0.1-nm-, 0.15-nm-, and 0.3-nm-thick-Pd-deposited Cu(1 1 0) surfaces using infrared reflection absorption (IRRAS) and temperature-programmed desorption (TPD) spectroscopic methods. CO was exposed to the 0.1-nm-thick-Pd/Cu(1 1 0) surface at the substrate temperature of 90 K. The IR band attributable to CO bonded to Cu atoms emerged at 2092 cm⁻¹: the band was located at 2100 cm⁻¹ at saturation coverage, with a shoulder at 2110 cm⁻¹. In addition to these bands, weak absorptions attributable to the PdCO bonds appeared at 2050 and 1960 cm⁻¹. With increasing Pd thickness, the Pd related-bands became increasingly prominent. Particularly at the early stage of exposure, the band at 2115 cm⁻¹ became visible. The band at 2117 cm⁻¹ dominated the spectra all through the exposures for the 0.3-nm-thick-Pd surface. The TPD spectra of the surfaces showed two remarkable features at around 220-250 and 320-390 K, ascribable ,respectively, to CuCO and PdCO. The desorption peaks shifted to higher temperatures with increasing Pd thickness. Based on the TPD and IRRAS results, we discuss the adsorption-desorption behaviors of CO on the Pd/Cu(1 1 0) surfaces.     

Optically active vibrational modes in the photoluminescence line shape of BDMO-PPV films

In this work we simulate the photoluminescence (PL) spectra of BDMO-PPV thin films prepared by spin-coating technique on glass and on copper, as a function of temperature (12-300 K). Simulations were done using two theoretical models based on (i) the SSH theory where the line shape of the purely electronic transition is partly generated by localized states and partly by delocalized states and (ii) the semi-empirical model containing the coupling between localized molecular excitons and vibrational modes in Franck-Condon approach. Four active vibrational modes have been considered: C-C stretching coupled to a C-H bending of the phenyl ring at 1111.5 cm⁻¹, inter-rings C-C stretching at 1282.2 cm⁻¹, CC stretching coupled to a C-H bending of the vinyl group at 1309.3 cm⁻¹, C-C stretching of the phenyl ring at 1580.2 cm⁻¹. Additional vibrational mode of 403 cm⁻¹ associated with C-C-C out-of-plane bending allowed leastwise for this material to adjust well with the characteristic asymmetry of the purely electronic transition. Finally, application of theoretical models are strongly dependent on the well-resolved PL spectra, i.e., electronic transition peak presented a relatively thinner HWHM and an asymmetric line shape.     

Pulsed electron beam deposition of highly oriented thin films of polytetrafluoroethylene

Thin films of polytetrafluoroethylene (PTFE) were deposited by pulsed electron deposition (PED) technique. The transmission electron microscopy (TEM) image of the RT fabricated (20 Å thick) film on carbon coated copper grid shows crystalline nature. Infrared spectra show one to one correspondence between PED ablated film and the PTFE bulk target. The asymmetrical and symmetrical -CF₂- stretching modes were observed at 1220 and 1156 cm⁻¹, respectively. The -CF₂- wagging and bending modes occur at 644 and 512 cm⁻¹, respectively. X-ray diffraction patterns of the film deposited at room temperature (RT) show oriented film along (1 0 0) plane of hexagonal structure and the crystalline nature is retained up to 300 °C on vacuum annealing. The room temperature fabricated film shows smooth and pin hole free surface whereas post-annealing brings discontinuity, roughness and pin holes.     

Combinatorial synthesis of Li-doped NiO thin films and their transparent conducting properties

Transparent and conductive oxide (TCO) thin films of Li-doped NiO were prepared by combinatorial pulsed laser deposition technique. Composition spread approach was applied to optimize the Li concentration for achieving high conductivity and transparency in the film. Conductivity of the composition spread film was found to increase almost linearly from nearly insulating to as high as 1.41 Ω⁻¹ cm⁻¹ with increasing Li content along a 9 mm long film. Optical transparency was found to decrease in an equal proportion across the 40 nm thick film with a slight shift in the absorption edge.     

Thermodynamics of nitrogen adsorption on the zeolite H-FER

Adsorption (at a low temperature) of nitrogen on the protonic zeolite H-FER results in hydrogen bonding of the adsorbed N₂ molecules with the zeolite Si(OH)Al Brønsted acid groups. This hydrogen bonding interaction leads to activation, in the IR, of the fundamental NN stretching mode, which appears at 2331 cm⁻¹. From the infrared spectra taken over a temperature range, while simultaneously recording integrated IR absorbance, temperature and nitrogen equilibrium pressure, the thermodynamics of the adsorption process was studied. The standard adsorption enthalpy and entropy resulted to be ΔH° = −20(±1) kJ mol⁻¹ and ΔS° = −131(±10) J mol⁻¹ K⁻¹, respectively.     

Studies on surface graft polymerization of acrylic acid onto PTFE film by remote argon plasma initiation

The graft polymerization of acrylic acid (AAc) was carried out onto poly(tetrafluoroethylene) (PTFE) films that had been pretreated with remote argon plasma and subsequently exposed to oxygen to create peroxides. Peroxides are known to be the species responsible for initiating the graft polymerization when PTFE reacts with AAc. We chose different parameters of remote plasma treatment to get the optimum condition for introducing maximum peroxides (2.87 × 10⁻¹¹ mol/cm²) on the surface. The influence of grafted reaction conditions on the grafting degree was investigated. The maximum grafting degree was 25.2 μg/cm². The surface microstructures and compositions of the AAc grafted PTFE film were characterized with the water contact angle meter, Fourier-transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). Contact angle measurements revealed that the water contact angle decreased from 108° to 41° and the surface free energy increased from 22.1 × 10⁻⁵ to 62.1 × 10⁻⁵ N cm⁻¹ by the grafting of the AAc chains. The hydrophilicity of the PTFE film surface was greatly enhanced. The time-dependent activity of the grafted surface was better than that of the plasma treated film.     

Oxygen broadening parameters of water vapor: 1212-2136 cm

Oxygen-broadened half-widths and pressure induced frequency shifts of water vapor were measured in the (0 1 0)-(0 0 0) band between 1212 and 2136 cm⁻¹. Over 400 observations were obtained at 0.0054 cm⁻¹ spectral resolution using a Fourier transform spectrometer at the Kitt Peak National Observatory. The observed width coefficients ranged from 0.0057 to 0.0718 cm⁻¹/atm and the shift coefficients fell between 0.0042 and −0.0169 cm⁻¹/atm. Previous measurements of N₂- and air-broadening of H₂O by the first author over this spectral range were included in the analysis to compute air-broadening coefficients with comparisons to the observed values. The H₂O+O₂ measured half-widths are compared with previously measured values given in the available literature.     

A theoretical study of TeOH in its electronic ground state

The ab initio multireference single- and double-excitation configuration interaction (MRD-CI) method has been used to calculate the potential surfaces for the six lowest-lying electronic states of the TeOH molecule. The ²A″ ground state is predicted to have a bent equilibrium geometry. The first excited state, ²A′, is calculated to lie 2695 cm⁻¹ above the ground state. The MORBID program package has been used for the rotation-vibration analysis of the electronic ground state, for which the term values of the fundamental levels are calculated as 582 cm⁻¹ for the Te-O stretching mode, 959 cm⁻¹ for the bending mode, and 3655 cm⁻¹ for the O-H stretching mode.     

REMPI and IR-UV double resonance spectroscopy of 3-aminophenol·(NH3)1 cluster in the gas phase

The electronic and geometric structures of the cluster consisting of 3-aminophenol (3AP) and one ammonia molecule were investigated using resonance-enhanced multiphoton ionization and IR-UV double resonance spectroscopy in the gas phase. Between the cis and trans isomers found for the bare 3AP molecule, only trans isomer was found for 3AP·(NH₃)₁. It was found that complete quenching of the excited state of cis isomer, e.g. by conformer-specific excited state hydrogen transfer reaction, does not seem to occur, but that efficient conformational cooling drives the ground state population into the most stable trans isomer. The 0-0 band of the trans-3AP·(NH₃)₁ at 34 409 cm⁻¹ is red-shifted by 68 cm⁻¹ from that of the trans-3AP at 34 477 cm⁻¹. The IR depletion spectrum shows that the OH stretching vibration (3296 cm⁻¹) is red-shifted by 362 cm⁻¹ from that of the bare molecule. The large red-shift in OH frequency, combined with MP2 calculation, reveals that the structure of the cluster is the one with the nitrogen atom of ammonia bound to the hydroxyl hydrogen of aminophenol.     

Charge states of a hydrogen defect (3326 cm line) in ZnO

The hydrogen defect in ZnO that gives rise to a local vibrational mode at 3326 cm⁻¹ is investigated by means of IR absorption. Sub-band gap illumination results in the appearance of a new line at 3358 cm⁻¹ at the expense of the 3326 cm⁻¹ signal. The measurements identify both IR absorption signals as O–H stretch modes of the same defect in different charge states. The effect of the sub-band gap light strongly suggest that this defect has a deep level in the band gap. Additionally, results on the thermal stability of the 3326 cm⁻¹ feature are presented.     

Nanotwinning in CdS quantum dots

High resolution transmission electron microscopy, X-ray diffraction and photoluminescence measurements are carried out in order to study the defects in CdS quantum dots (QDs), synthesized in cubic phase by chemical co-precipitation method. The nanotwinning structures in CdS quantum dots (∼2.7 nm) are reported for the first time. Mostly CdS QDs are characterized by existence of nanotwin structures. The twinning structures are present together with stacking faults in some QDs while others exist with grain boundaries. Raman spectroscopy analysis shows intense and broad peaks corresponding to fundamental optical phonon mode (LO) and the first over tone mode (2LO) of CdS at 302 cm⁻¹ and 605 cm⁻¹ respectively. A noticeable shift is observed in Raman lines indicating the effect of phonon confinement. Fourier transform infrared spectroscopy analysis confirms the presence of Cd–S stretching bands at 661 cm⁻¹ and 706 cm⁻¹. The photoluminescence spectrum shows emission in yellow and red regions of visible spectrum. The presence of stacking faults and other defects are explained on the basis of X-rays diffraction patterns and are correlated with photoluminescence spectrum. These nanotwinning and microstructural defects are responsible for different emissions from CdS QDs.     

The surface structure of Fe3O4(1 1 1) films as studied by CO adsorption

We have studied adsorption of CO on Fe₃O₄(1 1 1) films grown on a Pt(1 1 1) substrate by temperature programmed desorption (TPD), infrared reflection absorption spectroscopy (IRAS) and high resolution electron energy loss spectroscopy (HREELS). Three adsorption states are observed, from which CO desorbs at ∼110, 180, and 230 K. CO adsorbed in these states exhibits stretching frequencies at ∼2115-2140, 2080 and 2207 cm⁻¹, respectively. The adsorption results are discussed in terms of different structural models previously reported. We suggest that the Fe₃O₄(1 1 1) surface is terminated by 1/2 ML of iron, with an outermost 1/4 ML consisting of octahedral Fe²⁺ cations situated above an 1/4 ML of tetrahedral Fe³⁺ ions, in agreement with previous theoretical calculations. The most strongly bound CO is assigned to adsorption to Fe³⁺ cations present on the step edges.     

First-principles prediction and partial characterization of the vibrational states of water up to dissociation

A new, accurate, global, mass-independent, first-principles potential energy surface (PES) is presented for the ground electronic state of the water molecule. The PES is based on 2200 energy points computed at the all-electron aug-cc-pCV6Z IC-MRCI(8,2) level of electronic structure theory and includes the relativistic one-electron mass-velocity and Darwin corrections. For H₂¹⁶O, the PES has a dissociation energy of D₀ = 41 109 cm⁻¹ and supports 1150 vibrational energy levels up to 41 083 cm⁻¹. The deviation between the computed and the experimentally measured energy levels is below 15 cm⁻¹ for all the states with energies less than 39 000 cm⁻¹. Characterization of approximate vibrational quantum numbers is performed using several techniques: energy decomposition, wave function plots, normal mode distribution, expectation values of the squares of internal coordinates, and perturbing the bending part of the PES. Vibrational normal mode labels, though often not physically meaningful, have been assigned to all the states below 26 500 cm⁻¹ and to many more above it, including some highly excited stretching states all the way to dissociation. Issues to do with calculating vibrational band intensities for the higher-lying states are discussed.