Co9S8 Nanoparticles Incorporated in Hierarchically Porous 3D Few‐Layer Graphene‐Like Carbon with S,N‐Doping as Superior Electrocatalyst for Oxygen Reduction Reaction

Electrochemical oxygen reduction reaction (ORR), using nonprecious metal catalysts, has attracted great attention due to the importance in renewable energy technologies, such as fuel cells and metal–air batteries. A simple and scalable synthetic route is demonstrated for the preparation of a novel 3D hybrid nanocatalyst consisting of Co₉S₈ nanoparticles which are incorporated in N,S‐doped carbon (N, S–C) with rational structure design. In particular, the hybrid catalyst is prepared by direct pyrolysis and calcination of a gel mixture of Mg,Co nitrate‐thiourea‐glycine under Ar atmosphere, with subsequent HCl washing. The properties of obtained hybrid catalyst are quite dependent on calcination temperature and added glycine amount. Under a molar ratio of Co5‐Mg15‐tu10‐gl45 and a calcination temperature of 900 °C, Co₉S₈ nanoparticles are embedded in a well‐developed carbon matrix which shows a porous 3D few‐layer graphene‐like N, S–C with open and hierarchical micro–meso–macro pore structure. Because of the synergistic effect between Co₉S₈ nanoparticles and well‐developed carbon support, the composite exhibits high ORR activity close to that of commercial Pt/C catalyst. More importantly, the composite displays superior long‐term stability and good tolerance against methanol. The strategy developed here provides a novel and efficient approach to prepare a cost‐effective and highly active ORR electrocatalyst.     

Ultrathin Fe‐N‐C Nanosheets Coordinated Fe‐Doped CoNi Alloy Nanoparticles for Electrochemical Water Splitting

The development of highly active and cost‐effective catalyst materials toward electrochemical water splitting is of great importance for converting and storing the intermittent solar energy in the form of hydrogen. Herein, for the first time, an ultrathin Fe and N‐co‐doped carbon nanosheet encapsulated Fe‐doped CoNi alloy nanoparticle (FeCoNi@FeNC) composite is obtained and applied as a bifunctional catalyst for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). This catalyst exhibits prominent catalytic performances for both HER and OER, which only requires overpotentials of 102 and 330 mV, respectively, to reach a current density of 10 mA cm^?2 in alkaline media. The high catalytic activity is intrinsically associated with the presence of Fe in both nanosheets and nanoparticles, which has triggered the occurrence of coordinative effects between Fe‐N‐C and FeCoNi that are beneficial for HER and OER, as revealed by electrochemical techniques. In an overall water splitting electrolyzer, FeCoNi@FeNC is employed as both the cathode and anode catalysts, achieving 12 mA cm^?2 at 1.63 V for a duration of more than 12 h.     

Substrate‐Induced Synthesis of Nitrogen‐Doped Holey Graphene Nanocapsules for Advanced Metal‐Free Bifunctional Electrocatalysts

The development of efficient metal‐free electrocatalysts for oxygen electrocatalysis is of great significance for various energy conversion devices. Herein, novel nitrogen‐doped holey graphene nanocapsules (NHGNs) are reported prepared by self‐assembly of graphene oxide nanosheets on the surface of amino‐functionalized silica template and NH₃ activation with simultaneously enhanced nitrogen doping and etching of nanopores in graphene, followed by template etching. The silica template is demonstrated to show a substrate‐enhanced effect on nitrogen doping and etching of nanopores in graphene based on density functional theory calculations. Benefiting from the large surface area, unique pore distribution, and high surface functionality of nitrogen doping, the resulting NHGNs exhibit superior bifunctional electrocatalytic activity and durability for both oxygen reduction reaction and oxygen evolution reaction, which is similar to that of the commercial Pt/C and RuO₂ electrocatalysts, respectively. This work presents an advance in developing new nitrogen‐doped graphene species for highly efficient metal‐free electrocatalysis.     

Magnetic and electromagnetic absorption properties of FeNi alloy nanoparticles supported by reduced graphene oxide

FeNi alloy nanoparticles (NPs) supported by reduced graphene oxide (RGO) (FeNi/RGO nanocomposites) were successfully synthesized through in‐situ reduction. Large amounts of sphere‐like FeNi NPs are uniformly deposited on the RGO nanosheets. The magnetic hysteresis measurement reveals the ferromagnetic behavior of the nanocomposites at room temperature. According to the electromagnetic (EM) characteristics, the FeNi/RGO nanocomposites show outstanding EM absorption properties in the 2–18 GHz range, as evidenced by the wide effective absorption bandwidth (up to 3.3 GHz, with reflection loss R_L < –10 dB) and a minimal R_L (–32 dB) at 12.4 GHz with a thickness of 1.5 mm. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

基于第一性原理的锂空气电池钌掺杂石墨烯正极 氧还原反应机理研究

双电解液锂空气电池因其高理论能量密度受到广泛研究,但电池正极侧氧还原反应(ORR)速率低,其反应速率是限制锂空气电池发展的主要因素之一.本文提出了以钌(Ru)掺杂单层石墨烯作为正极ORR催化剂,采用第一性原理计算nRu (n=1～3)掺杂石墨烯的电子结构和氧气在Ru掺杂石墨烯表面的吸附性能,并以过渡态搜索方法获得ORR反应路径,研究碱性溶液中Ru掺杂单层石墨烯作用下的ORR机理.研究结果表明,经Ru原子掺杂后,石墨烯能够获得稳定的掺杂结构,且电导率显著提升.同原始单层石墨烯相比,Ru掺杂石墨烯增强了对O₂的吸附能力.在三Ru(n=3)掺杂石墨烯表面进行的ORR无需克服任何能垒.此外,三Ru掺杂石墨烯表面对OH基团的吸附能最低,有利于ORR的连续进行.研究表明三Ru掺杂石墨烯有望成为一种新型的ORR催化剂以提高双电解液锂空气电池的性能.     

A Self‐Assembly Route to an Iron Phthalocyanine/Reduced Graphene Oxide Hybrid Electrocatalyst Affording an Ultrafast Oxygen Reduction Reaction

Graphene oxide (GO) is an attractive freestanding support that can be decorated with ultrathin organic layers for facile and low‐cost fabrication of novel devices with controllable functional properties and microstructures. Here, it is reported that a hybrid material consisting of an ultrathin iron phthalocyanine (FePc) layer self‐assembled on reduced graphene oxide (rGO) exhibits excellent catalytic activity that is superior to that of commercial Pt/C for an oxygen reduction reaction (ORR). During solution processing, the FePc layer is first self‐organized onto GO sheets and then reduced electrochemically to form an FePc/rGO hybrid electrocatalyst. Kinetics studies reveal that the hybrid architecture affords an ultrafast ORR rate caused by a strongly dominant four‐electron process, and the durability of the catalyst shows significant improvement by forming the hybrid structure. Spectroscopic studies suggest that these advantages are afforded by synergistic effects between FePc and rGO, which are enriched by the hybrid structure and the appropriate reduction step.     

Sulfonated reduced graphene oxide as a highly efficient catalyst for direct amidation of carboxylic acids with amines using ultrasonic irradiation

Sulfonated reduced graphene oxide nanosheets (rGO-SO₃H) were prepared by grafting sulfonic acid-containing aryl radicals onto chemically reduced graphene oxide (rGO) under sonochemical conditions. rGO-SO₃H catalyst was characterized by Fourier-transform infrared (FT-IR) spectroscopy, Raman spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and X-ray photoelectron spectroscopy (XPS). rGO-SO₃H catalyst was successfully applied as a reusable solid acid catalyst for the direct amidation of carboxylic acids with amines into the corresponding amides under ultrasonic irradiation. The direct sonochemical amidation of carboxylic acid takes place under mild conditions affording in good to high yields (56–95%) the corresponding amides in short reaction times.     

Bifunctional oxygen electrocatalysts for rechargeable zinc−air battery based on MXene and beyond

Oxygen electrocatalysts are of great importance for the air electrode in zinc–air batteries (ZABs). Owing to large surface area, high electrical conductivity and ease of modification, two-dimensional (2D) materials have been widely studied as oxygen electrocatalysts for the rechargable ZABs. The elaborately modified 2D materials-based electrocatalysts, usually exhibit excellent performance toward the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), which have attracted extensive interests of worldwide researchers. Given the rapid development of bifunctional electrocatalysts toward ORR and OER, the latest progress of non-noble electrocatalysts based on layered double hydroxides (LDHs), graphene, and MXenes are intensively reviewed. The discussion ranges from fundamental structure, synthesis, electrocatalytic performance of these catalysts, as well as their applications in the rechargeable ZABs. Finally, the challenges and outlook are provided for further advancing the commercialization of rechargeable ZABs.     

Composite Nanoarchitectonics with iron nickel bimetallic nanoparticles and carbon composite for efficient electrocatalysis in hydrogen evolution reaction

The poor efficiency and stability of cost-effective metal compounds are major hurdles to substitute expensive metal-based nanomaterials for the hydrogen evolution reaction (HER). As a result, new concepts and tactics for developing electrocatalysts based on earth-abundant elements must be developed. We present iron-nickel alloy nanoparticles that are supported with carbon (FeNi@C) to improve HER performance in alkaline conditions. FeNi particle was supported on Trimesic acid (TMA) based carbon. In particular, the high conductivity of the carbon and a large number of catalytically active sites in the FeNi demonstrated a synergistic effect, making the hybrid structure a good choice for HER catalyst. Moreover, the physicochemical interaction between the carbon and FeNi metal enhanced the electrocatalytic performance and resulted in achieving 10 mA/cm² current density at 190 mV overpotential with 15 h chronopotential cycling, proving the possibility for replacing costly Pt-based catalysts.     

A Highly Effective,Stable Oxygen Evolution Catalyst Derived from Transition Metal Selenides and Phosphides

Recently, transition metal chalcogenides and phosphides have been increasingly reported as efficient and stable oxygen evolution reaction (OER) catalysts in alkaline medium, despite the fact that they are thermodynamically unstable under highly oxidative potentials. Here the active forms of these materials are elucidated by synthesizing a hybrid catalyst, which has a metal chalcogenide in the form of CoSe₂ and metal phosphide in the form of CoP—CoSe₂|CoP. Both CoSe₂ and CoP in the as‐prepared catalyst are completely transformed into their respective oxyhydroxides and hydroxides, which are, in fact, the true OER‐active species in alkaline medium and not the selenide and phosphide themselves. The derived oxides from the hybrid catalyst deliver an excellent OER activity by reaching a current density of 10 mA cm⁻² at a low overpotential of 240 mV (vs reversible hydrogen electrode (RHE)) and a Tafel slope of 46.6 mV dec⁻¹. The stability of the derived oxyhydroxide/hydroxide catalyst shows no appreciable deactivation during 120 h of continuous electrolysis, displaying an extraordinary operational stability.