Structural characterization of the V2O5/TiO2 system obtained by the sol–gel method

The influence of the vanadium load and calcination temperature on the structural characteristics of the V₂O₅/TiO₂ system was studied by X-ray diffraction and X-ray absorption spectroscopy (XAS) techniques. Samples of the V₂O₅/TiO₂ system were prepared by the sol–gel method under acid conditions and calcined at different temperatures. The rutile phase was found to predominate in pure TiO₂ calcined at 450 °C as a result of the reduction of phase transition temperature promoted by the sol–gel method under acid conditions. The anatase phase became predominant at 450 °C as the amount of vanadium increased from 6 to 9 wt%. A structural change in the TiO₂ phase from predominantly anatase to totally rutile with increased calcination temperature was observed in 6 wt% samples. An analysis of the vanadium X-ray Absorption Near Edge Structure (XANES) spectra showed that the oxidation state of vanadium atoms in the samples containing 6 and 9 wt% of vanadium and calcined at 450 °C was predominantly V⁴⁺. However, the presence of V⁵⁺ atoms cannot be ruled out. A qualitative analysis of extended X-ray absorption fine structure (EXAFS) spectra of the samples containing 6 and 9 wt% of vanadium calcined at 450 °C showed that the local structure around vanadium atoms is comparable to that of VO₂ crystalline phase, in which vanadium atoms are fourfold coordinated in a distorted structure. For the sample after calcination at 600 °C, the EXAFS and XANES results showed that a significant portion of vanadium atoms were incorporated in the rutile lattice with a V_xTi_(1−x)O₂ solid solution formation. The conditions of sample preparation used here to prepare V₂O₅/TiO₂ samples associated with different amounts of vanadium and calcination temperatures proved to be useful to modifying the structure of the V₂O₅/TiO₂ system.     

The super-hydrophobic IR-reflectivity TiO2 coated hollow glass microspheres synthesized by soft-chemistry method

The super-hydrophobic and IR-reflectivity hollow glass microspheres (HGM) was synthesized by being coated with anatase TiO₂ and a super-hydrophobic material. The super-hydrophobic self-cleaning property prolong the life time of the IR reflectivity. TBT and PFOTES were firstly applied and hydrolyzed on HGM and then underwent hydrothermal reaction to synthesis anatase TiO₂ film. For comparison, the PFOTES/TiO₂ mutual-coated HGM (MCHGM), PFOTES single-coated HGM (F-SCHGM) and TiO₂ single-coated HGM (Ti-SCHGM) were synthesized as well. The MCHGM had bigger contact angle (153°) but smaller sliding angle (16°) than F-SCHGM (contact angle: 141.2°; sliding angle: 67°). Ti-SCHGM and MCHGM both showed similar IR reflectivity with ca. 5.8% increase compared with original HGM and F-SCHGM. For the thermal conductivity, coefficients of F-SCHGM (0.0479 W/(m K)) was basically equal to that of the original HGM (0.0475 W/(m K)). Negligible difference was found between the thermal conductivity coefficients of MCHGM-coated HGM (0.0543 W/(m K)) and Ti-SCHGM (0.0546 W/(m K)).     

Effects of calcining temperature on structural and magnetic properties of nanosized Fe-doped NiO prepared by diol-based sol−gel process

Iron-doped nickel oxide (Fe_0.01Ni_0.99O, abbreviated as FNO) nanoparticles were prepared by sol–gel process using 1,3-propanediol as a solvent and also as a chelating agent, and calcined at the various temperatures (400–1000 °C) for 2 h. The phase composition and the microstructure of the calcined products were investigated by X-ray diffraction and scanning electron microscopy techniques, respectively. Magnetic properties were measured at room temperature using a vibrating sample magnetometer. All calcined samples showed the single phase of FNO cubic rock-salt structure without the presence of any impurity phases. The crystallite size from XRD and particle size from SEM increased as calcining temperature increased. The FNO powders calcined at 400?600 °C revealed the uniform and dense spherical particles in nanosize. The room-temperature ferromagnetism was observed for all samples. When the calcining temperature was increased, the saturation magnetization decreased whereas the coercivity increased, corresponding to the less dense and larger particles. The calcined sample at 400 °C had the best magnetic properties with the highest M_s of 5.34 emu/g (at 10 kOe) and the lowest H_c of 372 Oe.     

Anatase TiO2 nanocrystals prepared by mechanochemical synthesis and their photochemical activity studied by EPR spectroscopy

Anatase TiO₂ has been prepared by mechanochemical synthesis using TiOSO₄·xH₂O and Na₂CO₃ as starting reactants. The reaction was performed in high-energy ball mill using steel and corundum jars, respectively. The final products were obtained by annealing the milled powder in the temperature range of 300–700 °C and subsequently by washing out the water-soluble byproduct Na₂SO₄·xH₂O. When steel jars were used, the annealing in the range of 300–600 °C led to anatase. For products milled in corundum, the stability of anatase increased up to 700 °C. Transition electron microscopy (TEM) showed that crystallites with a size in the range of 20–50 nm with equiaxed morphology were obtained after milling in corundum and annealing at 600 and 700 °C. The process of photoinduced reactive hydroxyl radical generation in aerated aqueous titania suspensions was studied by EPR spectroscopy using spin trapping technique. The presence of iron impurities in the samples milled in steel substantially decreases the radical formation. The rate of radical formation is substantially affected by particle size development of TiO₂ nanopowders. The product milled in corundum and annealed at 700 °C outperforms more than twice the photochemical activity of TiO₂ Degussa P25 standard.     

Preparation and photocatalytic activity of bicrystal phase TiO2 nanotubes containing TiO2-B and anatase

Bicrystal phase TiO₂ nanotubes (NTS) containing monoclinic TiO₂-B and anatase were prepared by the hydrothermal reaction of anatase nanoparticles with NaOH aqueous solution and a heat treatment. Their structure was characterized by XRD, TEM and Raman spectra. The results showed that the bicrystal phase TiO₂ NTS were formed after calcining H₂Ti₄O₉·H₂O NTS at 573 K. The bicrystal phase TiO₂ NTS exhibit significantly higher photocatalytic activity than the single phase anatase NTS and Dessuga P-25 nanoparticles in the degradation of Methyl Orange aqueous solution under ultraviolet light irradiation, which is attributed to the large surface and interface areas of the bicrystal phase TiO₂ NTS.     

Comparative study on structural and optical properties of ZnO thin films prepared by PLD using ZnO powder target and ceramic target

Zinc oxide thin films have been obtained in O₂ ambient at a pressure of 1.3 Pa by pulsed laser deposition (PLD) using ZnO powder target and ceramic target. The effect of temperature on structural and optical properties of ZnO thin films was investigated systematically by XRD, SEM, FTIR and PL spectra. The results show that the best structural and optical properties can be achieved for ZnO thin film fabricated at 700 °C using powder target and at 400 °C using ceramic target, respectively. The PL spectrum reveals that the efficiency of UV emission of ZnO thin film fabricated by using powder target is low, and the defect emission of ZnO thin film derived from Zn_i and O_i is high.     

Synthesis of CoFe2O4 nanoparticles embedded in a silica matrix by the citrate precursor technique

A metals–citrate–silica gel was prepared from metallic salts, citric acid and tetraethylorthosilicate by sol–gel method (citrate precursor technique) and it was further used to prepare magnetic nanocomposites. The gel was dried at 100 °C and then calcined at temperatures between 600 and 1000 °C to obtain powder samples. The nanocomposites were characterized by XRD, IR, VSM and TEM techniques. The diffraction patterns show the formation of a single magnetic phase identified as CoFe₂O₄. Magnetic nanoparticles with average size less than 50 nm were obtained which are well dispersed in the silica matrix. The combination of different metals concentrations and calcining temperatures allowed obtaining samples with magnetization ranging from 3.6 to 25.3 emu/g.     

Preparation of phase pure and well-crystallized Li4Ti5O12 nanoparticles by precision control of starting mixture and calcining at lowest possible temperatures

In an attempt to obtain spinel Li₄Ti₅O₁₂ with smallest possible grain size and highest possible phase purity via a solid state route, we tried to elevate reactivity of the reactant mixture by mechanical activation and appropriate choice of the starting materials. From the stoichiometric mixture comprising Li₂CO₃ and 150 nm anatase, we needed to heat at 950 °C for 1 h to obtain 81–88% phase purity (PhP) of Li₄Ti₅O₁₂ with its average grain size ca 600 nm. After mechanical activation with a multi-ring mill for 30 min, 850 °C was enough to obtain 85–87% pure 500 nm spinel. From a combination of LiNO₃ and 50 nm anatase, 90–91% phase pure product with its grain size 240 nm was obtained at 750 °C due to fusion of the nitrate and shorter diffusion path. By using CH₃COOLi.2H₂O and 50 nm anatase we obtained 130 nm Li₄Ti₅O₁₂ with its PhP ca 90% by milling the mixture preliminarily calcined at 500 °C for 1 h and heating subsequently at 700 for 1 h.     

Ultrasonic synthesis and photocatalytic characterization of H3PW12O40/TiO2 (anatase)

A novel H₃PW₁₂O₄₀/TiO₂ (anatase) composite photocatalyst was prepared by a high-intensity ultrasonic method using a lower temperature (80 °C) and was characterized by XRD and FT-IR. Its photocatalytic activity, using solar light, was evaluated through the degradation of organic dye methylene blue (MB) in aqueous. When MB solution (50 mg/l, 200 ml) containing H₃PW₁₂O₄₀/TiO₂ (anatase) (0.4 g) was degraded by solar irradiation after 90 min, the removal of concentration and TOC of MB reached 95% and 73%, respectively. The photocatalyst activity of H₃PW₁₂O₄₀/TiO₂ (anatase) was much higher than TiO₂ which was prepared in the same way. H₃PW₁₂O₄₀/TiO₂ remained efficient after five repeated experiments.     

Investigation of the growth and local stoichiometric point group symmetry of titania nanotubes during potentiostatic anodization of titanium in phosphate electrolytes

Potentiostatic anodization of commercially pure, 50 µm-thick titanium (Ti) foil was performed in aqueous, phosphate electrolytes at increasing experimental timeframes at a fixed applied potential for the synthesis of titania nanotube arrays (TNAs). High resolution scanning electron microscopy images, combined with energy dispersive spectroscopy and x-ray diffraction spectra reveal that anodization of the Ti foil in a 1 M NaF+0.5 M H₃PO₄ electrolyte for 4 h yields a titanate surface with pore diameters ranging between 100 and 500 nm. The presence of rods on the Ti foil surface with lengths exceeding 20 µm and containing high concentrations of phosphor on the exterior was also detected at these conditions, along with micro-sized coral reef-like titanate balls. We propose that the formation of these structures play a major role during the anodization process and impedes nanotube growth during the anodization process. High spatially resolved scanning transmission electron microscopy-electron energy loss spectroscopy (STEM-EELS) performed along the length of a single anodized TiO₂ nanotube reveals a gradual evolution of the nanotube crystallinity, from a rutile-rich bottom to a predominantly anatase TiO₂ structure along its length.     

Fabrication and characterization of silver/titanium dioxide composite nanoparticles in ethylene glycol with alkaline solution through sonochemical process

This paper aims to study fabrication and characterization of silver/titanium oxide composite nanoparticle through sonochemical process in the presence of ethylene glycol with alkaline solution. By using ultrasonic irradiation of a mixture of silver nitrate, the dispersed TiO₂ nanoparticle in ethylene glycol associated with aqueous solution of sodium oxide yields Ag/TiO₂ composite nanoparticle with shell/core-type geometry. The powder X-ray diffraction (XRD) of the Ag/TiO₂ composites showed additional diffraction peaks corresponding to the face-centered cubic (fcc) structure of silver crystallization phase, apart from the signals from the cores of TiO₂. Transmission electron microscopy (TEM) images of Ag/TiO₂ composites, which average particle size is roughly 80 nm, reveal that the titanium oxide coated by Ag nanoparticle with a grain size of about 2–5 nm. Additionally, the formation of silver nanoparticles on TiO₂ was monitored by ultraviolet visible light spectrophotometer (UV–Vis). As measured the optical absorption spectra of as-synthesized Ag nanoparticle varying with time, the mechanism of surface formatting silver shell on the cores of TiO₂ could be explored by autocatalytic reaction; the conversion of Ag particle from silver ion is 98% for the reaction time of 1000 s; and the activity energy of synthesizing Ag nanoparticles on TiO₂ is 40 kJ/mol at temperature ranging from 5 to 25 °C. Hopefully, this preliminary investigation could be used for mass production of composite nanoparticles assisted by ultrasonic chemistry in the future.     

Periodic density functional theory studies of the VOx/TiO2 (anatase) catalysts: Structure and stability of monomeric species

Periodic density functional theory has been utilized to investigate the structure and stability of monomeric HVO_x species on anatase support. The three most stable surfaces of anatase were investigated, namely the (001), (100) and (101) surfaces. Unlike previous theoretical studies it was found that on the (001) surface vanadia species with five-coordinated vanadium atom are more stable than those with tetrahedrally coordinated vanadium atom. On the other hand, on the (100) and (101) surfaces, the vanadium atom in the vanadia species is still tetrahedrally coordinated. The stability of different VO_x/TiO₂ structures which are not fully dehydrated has been systematically studied and the results show that the vanadia species on the three surfaces follow an order of TiO₂ (001) > TiO₂ (100) > TiO₂ (101). This can be understood from the acidity and basicity of the three anatase surfaces. The results suggest that monomeric VO_x species may be better stabilized if the support exposes more (001) surfaces. Our analyses on electronic structure of the most stable VO_x/TiO₂ structure (D₀₀₁) suggest that its bridging V–O–Ti oxygen atoms may have higher reactivity than the terminal vanadyl oxygen atoms.     

Simple one-step ultrasonic synthesis of anatase titania/polypyrrole nanocomposites

In this work, hybrid nanocomposites based on anatase titania:polypyrrole (TiO₂:PPy) were directly obtained from a simple, one-step, ultrasonic (UT)-assisted synthesis. The properties of these crystalline nanocomposites were compared with those of others fabricated using cold (Cold)-assisted synthesis without any UT assistance, which required a hydrothermal treatment (HT) to yield crystalline anatase titania in the nanocomposite (TiO₂:PPy) at low temperature (130 °C) and in a short time (3 h). The SEM results demonstrated that the UT-assisted synthesis is a feasible method to obtain anatase TiO₂:PPy nanocomposites with controlled morphology using low energy. The Fourier transform infrared (FT-IR) bands of the crystalline nanocomposites exhibited a shift with respect to neat components, which was attributed to the strong interaction between the secondary amine groups (N–H) of PPy and the oxygen from TiO₂. The acceptable absorption in the visible region (λ_max = 670 nm) indicates that these nanocomposites are good candidates for harvesting energy in solar cells. Devices based on these nanocomposites were built to evaluate their electrical properties. An increase in the photocurrent was observed for the devices prepared with the nanocomposites from the UT-assisted synthesis.     

Effect of Sn doping on the structural,optical and electrical properties of TiO2 films prepared by spray pyrolysis

In this work, highly oriented pure and Tin-doped Titanium dioxide (Sn-doped TiO₂) with porous nature photoelectrodes were deposited on ITO glass plates using spray pyrolysis technique. The XRD pattern revealed the formation of anatase TiO₂ with the maximum intensity of (101) plane while doping 6 at% of Sn. The morphological studies depicted the porous nature with the uniform arrangement of small-sized grains. The presence of tin confirmed with the EDX spectra. The size of particles of 13 nm was observed from High Resolution Transmission Electron Microscopy (HR-TEM) analysis. The average transmittance was about 85% for the doped photoelectrode and was observed for the photoelectrode deposited with 6 at% of tin, with decreased energy band gap. The PL study showed the emission peak at 391 nm. The maximum carrier concentration and Hall mobility was observed for the photoelectrode deposited with 6 at% of tin. With these studies, the DSSCs were prepared separately with the dye extracted from Hibiscus Rosasinesis and Hibiscus Surttasinesis and their efficiency was maximum for the DSSC prepared with 6 at% of tin.     

Sonocatalytic degradation of organic dyes and comparison of catalytic activities of CeO2/TiO2, SnO2/TiO2 and ZrO2/TiO2 composites under ultrasonic irradiation

The CeO₂/TiO₂, SnO₂/TiO₂ and ZrO₂/TiO₂ composites were prepared by dispersing various nano-sized oxides (CeO₂, SnO₂, ZrO₂ and TiO₂) with ultrasound and mixing TiO₂ with CeO₂, SnO₂ and ZrO₂, respectively, in boiling water in a molar ratio of 4:1, followed by calcining temperature 500 °C for 60 min. Then a series of sonocatalytic degradation experiments were carried out under ultrasonic irradiation in the presence of CeO₂/TiO₂, SnO₂/TiO₂ and ZrO₂/TiO₂ composites and nano-sized TiO₂ powder. Also, the influences of heat-treatment temperature and heat-treatment time on the sonocatalytic activities of CeO₂/TiO₂, SnO₂/TiO₂ and ZrO₂/TiO₂ composites, and of irradiation time and solution acidity on the sonocatalytic degradation of Acid Red B were investigated by UV–vis spectra. It was found that the sonocatalytic degradation of Acid Red B shows significant variation in rate and ratio that decreases in order: CeO₂/TiO₂ > SnO₂/TiO₂ > TiO₂ > ZrO₂/TiO₂ > SnO₂ > CeO₂ > ZrO₂, and the corresponding ratios of Acid Red B in aqueous solution are 91.32%, 67.41%, 65.26%, 41.67%, 28.34%, 26.75% and 23.33%, respectively. And that the degradation ratio is only 16.67% under onefold ultrasonic irradiation. Because of the good degradation efficiency, this method may be an advisable choice for the treatment of non- or low-transparent wastewaters in the future.     

Oxidation of ultra-thin Ti films on Mo(100): Soft X-ray photoelectron spectroscopy study

Titanium oxide films grown on Mo(100) have been investigated by low-energy electron diffraction (LEED) and soft X-ray photoelectron spectroscopy (PES). The film was grown by Ti deposition on Mo(100) and subsequent oxidation of the film by 12 L of O₂ exposure at room temperature. As the film was annealed at 700–1000 °C, the film in which the Ti atoms were in a Ti³⁺ oxidation state was formed. As the film was annealed at 1100–1500 °C, the oxidation state of Ti in the film was converted to Ti²⁺. The valence electronic structure of the film was measured under the condition that the emission from the Mo substrate was minimized due to a Cooper minimum of the Mo 4 d photoionization cross sections (hν = 100 eV). It was found that the Ti 3 d band in normal-emission spectra was increased in intensity when the film was annealed at 1100–1500 °C. As the film was annealed at 1300 °C for 10 s and 20 s, the film-covered Mo(100) gave (2 × 2) and (4 × 1) LEED patterns, respectively. The two-dimensional band structure of the (2 × 2) system was investigated by angle-resolved PES, and it was found that the film with a (1 × 1) periodicity with respect to the Mo(100) substrate existed in the (2 × 2) system.     

Effect of calcination temperature on phase transformation,structural and optical properties of sol–gel derived ZrO2 nanostructures

Zirconia (ZrO₂) nanostructures of various sizes have been synthesized using sol–gel method followed by calcination of the samples from 500 to 700 °C. The calcined ZrO₂ powder samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier-transform infra-red spectroscopy (FT-IR), UV–visible spectroscopy (UV–vis.), Raman spectroscopy (RS) and thermogravimetric analysis (TGA). The phase transformation from tetragonal (t) to monoclinic (m) was observed. The average diameter of the ZrO₂ nanostructures calcined at 500, 600 and 700 °C was calculated to be 8, 17 and 10 nm, respectively. The ZrO₂ sample calcined at 500 °C with tetragonal phase shows a direct optical band gap of 5.1 eV. The value of optical band gap is decreased to 4.3 eV for the ZrO₂ calcined at 600 °C, which contains both tetragonal (73%) and monoclinic (27%) phases. On further calcination at 700 °C, where the ZrO₂ nanostructures have 36% tetragonal and 64% monoclinic phases, the optical band gap is calculated to be 4.8 eV. The enhancement in optical band gap for ZrO₂ calcined at 700 °C may be due to the rod like shape of ZrO₂ nanostructures. The tetragonal to monoclinic phase transformation was also confirmed by analyzing Raman spectroscopic data. The TG analysis revealed that the ZrO₂ nanostructure with dominance of monoclinic phase is found to be more stable over the tetragonal phase. In order to confirm the phase stability of the two phases of ZrO₂, single point energy is calculated corresponding to its monoclinic and tetragonal structures using density functional theory (DFT) calculations. The results obtained by theoretical calculations are in good agreement with the experimental findings.     

Photoreactive titanium oxide layer prepared from a titanium naphthenate

Highly transparent titanium oxide thin films were prepared on soda-lime–silica slide glass substrates from a titanium naphthenate precursor. Films prefired at 500 °C for 10 min were finally heat treated at 500 °C for 30 min in air. Crystallinity of the films was analyzed by high resolution X-ray diffraction analysis. A sharp absorption edge of the TiO₂ film was observed. The estimated energy band gap for the film is larger than that of single crystal TiO₂.     

A spectroscopic ellipsometry study of TiO2 thin films prepared by ion-assisted electron-beam evaporation

Film characterization based on variable-angle spectroscopic ellipsometry (VASE) is desirable in order to understand physical and optical characteristics of thin films. A number of TiO₂ film samples were prepared by ion-assisted electron-beam evaporation with 200-nm nominal thickness, 2.0 Å/s deposition rate and 8 sccm oxygen flow rate. The samples were maintained at 250 °C during the deposition, and annealed in air atmosphere afterwards. As-deposited and annealed films were analyzed by VASE, spectrophotoscopy and X-ray diffractometry. From ellipsometry modeling process, the triple-layer physical model and the Cody–Lorentz dispersion model offer the best results. The as-deposited films are inhomogeneous, with luminous transmittance and band gap of 62.37% and 2.95 eV. The 300 °C and 500 °C are transition temperatures toward anatase and rutile phases, respectively. Increasing temperature results in an increase of refractive index, transmittance percentage and band gap energy. At 500 °C, the highest refractive index and band gap energy are obtained at 2.62 and 3.26 eV, respectively. The developed VASE-modeling process should be able to characterize other TiO₂ films, using similar physical and optical modeling considerations.     

Luminescence properties of pHEMA-TiO2 gels based hybrids materials

Photoluminescence (PL) of photochromic pHEMA-TiO₂ gels-based hybrids was studied by means of time- and energy-resolved spectroscopy at temperatures between 300 K and 10 K. The PL band at 485 nm is assigned to S0←T1 transition of methoxyphenol (organic molecule added to the commercial monomer hydroxyethyl methacrylate, HEMA and used as an inhibitor of spontaneous polymerisation) in the polymer environment, while the PL band at 600 nm is assigned to the self-trapped exciton onto octahedral TiO₆ site of the inorganic component. The mechanisms of the excited states population are discussed. In particular it is shown that both singlet-triplet energy transfer in methoxyphenol and methoxyphenol–TiO₂ charge transfer are strongly affected by the material composition and temperature. The hypothesis about the photoexcited holes annihilation with the trapped electrons is confirmed to be one of main mechanisms limiting the Ti³⁺ centres concentration.