Laser generated Ag and Ag–Au composite nanoparticles for refractive index sensor

Localized surface plasmon resonance (LSPR) wavelength of metal nanoparticles (NPs) is highly sensitive to size, shape and the surrounding medium. Metal targets were laser ablated in liquid for preparation of spherical Ag and Ag@Au core–shell NP colloidal solution for refractive index sensing. The LSPR peak wavelength and broadening of the NPs were monitored in different refractive index liquid. Quasi-static Mie theory simulation results show that refractive index sensitivity of Ag, Ag–Au alloy and Ag@Au core–shell NPs increases nearly linearly with size and shell thickness. However, the increased broadening of the LSPR peak with size, alloy concentration and Au shell thickness restricts the sensing resolution of these NPs. Figure-of-merit (FOM) was calculated to optimize the size of Ag NPs, concentration of Ag–Au alloy NPs and Au shell thickness of Ag@Au core–shell NPs. The refractive index sensitivity (RIS) and FOM were optimum in the size range 20–40 nm for Ag NPs. Laser generated Ag@Au NPs of Au shell thickness in the range of 1–2 nm showed optimum FOM, where thin layer of Au coating can improve the stability of Ag NPs.     

Plasmonic enhancement of optical absorption of UV radiation by Au nanoparticles dispersed on ZnO thin film

Ultraviolet photoconductivity in sol gel-derived ZnO thin film loaded with gold (Au) nanoparticle (NPs) is investigated. Au-NPs loaded ZnO thin film (Au-NPs/ZnO) is found to exhibit high photoconducting gain (K) of about 4.12 × 10³ as compared to the bare ZnO thin film-based photodetector (4.9 × 10¹). The enhanced photoconductive gain of Au-NPs/ZnO detector has been achieved due to simultaneous lowering of dark current which occurs due to Schottky barrier effect originated after dispersing the Au NPs on the surface of ZnO thin film. The enhancement in photocurrent upon UV illumination is due to trapping of UV radiation via plasmonic effect caused by Au-NPs and subsequently coupling of absorbed light with the optical modes of underlying semiconducting ZnO surface.     

Tunable long-distance light transportation along Au nanoparticle chains: promising for optical interconnect

Tunable light resonance transportation along a single long Au hemisphere nanoparticles (NPs) chain was studied. The realistic experimentally determined gold dielectric function was used for the simulation of Au localized surface plasmon polariton (LSPPs) effect. The resonance light energy with minimized attenuation and its bandwidth were quantitatively analyzed by inducing the effective mass which was observed to increase only with the length of Au NPs between the source and the test point. The geometric ratio g/r of NP size and gap were investigated at 5 µm far of NPs with different gaps from 0 to 70 nm. Strongest resonance can be achieved with g/r = 1.2 by the factor of 1.5 than the connected NPs. This resonance mode falls in the wavelength λ = 555 nm (green light), which is exactly the maximum sensitivity of a light-adapted eye of human beings.     

Composite thin film materials on the basis of silver nanostructures on polymer matrix by methods of chemical metallization and self-assembling

The techniques of formation of thin metallic coatings by deposition of silver nanoparticles (NPs) from solution onto the surface of glass and silicon substrates modified by polyelectrolytes were developed. The possibilities of the adsorption of individual silver particles, as well as creation of continuous films on their basis, were shown. The transmission, absorption and reflection spectra of obtained coatings were investigated. The most promising structure for metamaterials creation from the list of formed one was determined—solid thin film of Ag NPs on a glass substrate modified by polyethylenimine.     

Optimized AC conductivity correlated to structure,morphology and thermal properties of PVDF/PVA/Nafion composites

Polyvinylidene fluoride (PVDF) and polyvinyl alcohol (PVA) composites were prepared by controlled loading of Nafion (5 to 15 wt%) by solution casting using water and dimethylformamide (DMF) as a solvent. The surface morphology of composite analyzed by atomic force microscopy (AFM) reveals the presence of Nafion ionomers. The increase in interlayer spacing of modified PVDF/PVA polymer system as a function of Nafion was detected by X-ray diffraction (XRD). The major change in Fourier transform infrared (FTIR) spectroscopy confirms the chemical bond C=O stretching around 1,700 cm^?1 due to Nafion. Differential scanning calorimetry (DSC) demonstrates the thermal stability of polymer composites and the decrease in melting temperature (T _m). The optimized AC conductivity (σ) of the prepared composite was evaluated by using an impedance analyzer as a function of temperature (40 to 150 °C) at constant 30-MHz frequency. The highest conductivity of 1.3?×?10^?2 S m^?1 was observed at 80 °C for 10 wt% of Nafion and correlated with structure, morphology and thermal properties of modified PVDF/PVA/Nafion composites. The experimental results may be useful for sensors, fuel cells and battery application domains.     

A simple strategy to fabricate poly (acrylamide-co-alginate)/gold nanocomposites for inactivation of bacteria

A facile and efficient approach to prepare uniform gold nanoparticles (Au NPs) in hybrid hydrogel consisting of acrylamide (AM) and alginate (SA) for antibacterial applications is reported. In this study, reduction of gold ions by acrylamide and alginate (AM–SA) occurred before the polymerization and as-obtained gold colloids are stabilized by AM–SA immediately in the absence of commonly used reducing agents and protective reagents. Via transmittance electron microscopy results, we can conclude that the obtained gold nanoparticles in hydrogel are well dispersed. Furthermore, ultraviolet–visible absorption spectroscopy, Fourier transform infrared and thermogravimetric analysis were used to characterize the structure and composition of the synthetic nanocomposites. Our approach provides well-dispersed nanoparticles around 8 mm in size. It is important to underline that nanoparticle aggregation was not observed during and after gel formation. The prepared Au NPs exhibited remarkable stability in the presence of high pH s, and a range of salt concentrations. Importantly, the hydrogel/gold nanocomposites showed a non-compromised activity to inhibit the growth of a model bacterium, Escherichia coli. With their excellent mechanical behavior, as well as the remained antibacterial activity, the nanocomposites should get various potential applications in the fields of pharmaceutical science and tissue engineering.     

The KLL Auger spectrum of fluorine

The KLL Auger spectrum of fluorine (Z=9) has been studied in three different fluoride salts. Five Auger lines are observed in each compound in accordance with extreme LS coupling theory. A cation dependence of the Auger transition energies and line-widths is observed. The energy shifts are in agreement with a theoretical model.     

System design considerations for precision measurement of high magnetic fields by Faraday effect

Practical and technical considerations for an instrument designed to measure high magnetic fields by Faraday effect are given. Magnetic fields up to 2 Tesla were measured and the results compared to those of Nuclear Magnetic Resonance technique. Results of measurements at low temperatures are also reported.     

Surface plasmon resonance and surface-enhanced Raman scattering activity of SiO2–Au core-cap nanostructure arrays

SiO₂–Au core-cap nanostructure arrays were prepared by dip-coating technique combined with wet chemical reduction method. The surface morphologies, structures, and optical properties of the obtained samples were characterized by scanning electron microscopy, X-ray diffraction, and ultraviolet–visible spectrophotometer, respectively. The surface-enhanced Raman scattering (SERS) activity of SiO₂–Au core-cap nanostructure arrays substrates was investigated using leucine as probe molecule. And the relationship between the SERS effect and the surface plasmon resonance (SPR) peaks was discussed. High-quality, stable, and reproducible SERS spectra of leucine were successfully obtained. When the maximum SPR peak matched with the excitation wavelength, the substrate gave rise to the highest SERS enhancement. Furthermore, six different fluorescent dyes were also chosen as probe molecules. It was found that the substrate showed good Raman enhancement and highly efficient fluorescence quenching characteristic on these fluorescent dyes.     

Double-walled core-shell structured Si@SiO2@C nanocomposite as anode for lithium-ion batteries

Double-walled core-shell structured Si@SiO₂@C nanocomposite has been prepared by calcination of silicon nanoparticles in air and subsequent carbon coating. The obtained Si@SiO₂@C nanocomposite demonstrates a reversible specific capacity of about 786 mAh g^?1 after 100 cycles at a current density of 100 mA g^?1 with a capacity fading of 0.13 % per cycle. The enhanced electrochemical performance can be due to that the double walls of carbon and SiO₂ improve the electronic conductivity and enhance the compatibility of electrode materials and electrolyte as a result of accommodating the significant volumetric change during cycles. The interlayer SiO₂ may release the mechanical strain and enhance the interfacial adhesion between carbon shell and silicon core.     

Radiative lifetimes of some energy levels of doubly ionized Xenon

Using 1–5 MeV Xenon ions we have studied the beam-foil spectrum of Xenon between 105 nm and 500 nm. Radiative lifetimes were measured for levels of Xenon III. For those lifetimes which have been measured previously (Andersen et al. [l]) good agreement is obtained. The interpretation of the decay curves and the assignment of a measured value, were done with the help of theoretical lifetimes obtained by Coulomb-approximation calculations [2].     

Superoxide- and NO-Dependent Mechanisms of the Reprogramming of Bone Marrow Cells by Tumor Cells

Electron paramagnetic resonance (EPR) experiments in vitro; spin trapping of the reactive oxygen/nitrogen species (superoxide radicals and nitric oxide, NO); gel zymography measurements in the tumor tissues, in the healthy and tumor-affected bone marrow (BM) samples of rats are carried out. The superoxide and NO generation rates are derived; matrix metalloproteinases (MMP-2 and MMP-9) concentrations are measured. Their changes after the incubation of BM samples with Guérin carcinoma cells at 37 °C are defined. It is shown that the impact of tumor cells on BM manifests in the metabolic disorder, increased concentrations of active forms of MMP-2 and MMP-9, increased production of superoxide and NO radicals. Correlation between the appearance and intensity of the broad EPR signal at g = 2.2–2.4 with the concentrations of active forms of MMP-2 and MMP-9, NO and superoxide radicals’ rates is observed. The obtained spatial and temporal changes of the measured parameters demonstrate the usefulness of the potential application of EPR imaging to study the mechanisms of tumor invasion. The EPR signal may indicate the presence of distant metastases, may become a part of diagnostics and used for the estimation of the therapeutic treatments in the pre-clinical studies. It is proposed that labile iron pool is responsible for the appearance of the EPR signal in tumor and BM samples.     

Plasma-assisted hot filament chemical vapor deposition of AlN thin films on ZnO buffer layer: toward highly c-axis-oriented,uniform, insulative films

c-Axis-oriented aluminum nitride (AlN) thin film with improved quality was deposited on Si(111) substrate using ZnO buffer layer by plasma-assisted hot filament chemical vapor deposition. The optical and electrical properties and surface morphology as well as elemental composition of the AlN films deposited with and without ZnO buffer layer were investigated using a host of measurement techniques: X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, field emission scanning electron microscopy (FESEM), and current–voltage (I–V) characteristic measurement. The XRD and XPS results reveal that the AlN/ZnO/Si films are free of metallic Al particles. Also, cross-sectional FESEM observations suggest formation of a well-aligned, uniform, continuous, and highly (002) oriented structure for a bi-layered AlN film when Si(111) is covered with ZnO buffer. Moreover, a decrease in full width at half maximum of the E₂ (high)-mode peak in Raman spectrum indicates a better crystallinity for the AlN films formed on ZnO/Si substrate. Finally, I–V curves obtained indicate that the electrical behavior of the AlN thin films switches from conductive to insulative when film is grown on a ZnO-buffered Si substrate.     

Synthesis at the nanoscale of ZnO into poly(methyl methacrylate) and its characterization

In this paper, PMMA/ZnO nanocomposites have been prepared by a very simple, facile and versatile chemical approach. The prepared PMMA/ZnO nanocomposites possess no color, high transparency, good thermal stability, UV-shielding capability, luminescence and homogeneity. The chemical process involved solution mixing of ZnO nanoparticles dispersed in DMAc with the Polymethylmethacrylate (PMMA) matrix dissolved in the same solvent. The effect of ZnO content on the physical properties of the PMMA matrix is investigated by X-ray diffraction, field emission scanning electron microscopy, thermogravimetric analysis, UV–Vis absorption and photoluminescence spectroscopy. It was found that pure hexagonal ZnO nanoparticles with an average particle size of 4–8 nm were homogeneously dispersed in the PMMA matrix. A significant improvement in thermal properties was observed with the incorporation of 1.0 wt% ZnO nanoparticles. The prepared nanocomposite films are highly transparent and a clear excitonic peak is observed in their absorption spectra. Measurement of room temperature photoluminescence spectra shows intensive near-band edge emission peak at 3.28 eV without any structural defects for a nanocomposite film with a filler content of 1.0 wt%.     

Luminescent properties of Eu2+ ions in AlN at low and high intensity of excitation

Luminescent properties of powder AlN∶Eu²⁺ phosphors were studied by excitation of 2-nd harmonic of ruby laser (hv=3·56 eV). It was shown that emission spectra of AlN∶Eu²⁺ phosphors consist of five or two overlapping bands according to the concentration of europium and the intensity of excitation. Decay times of luminescence of Eu²⁺ centres in different peaks lie between 0·9 and 1·5 μsec which is in agreement with the value of decay time of 4f⁶ 5d→47⁷ transition of Eu²⁺ ions. It is evident from the decomposition of emission spectra of Eu²⁺ centres that there exist several types of Eu²⁺ centres in AlN as was already demonstrated in the case of oxygen centres in AlN.     

Synthesis of fluorescent carbon dots from one-step pyrolysis of frontal-polymerized poly(acrylamide-co-4-vinylpyridine)

We report herein the synthesis of carbon dots (CDs) by a one-step pyrolysis from poly(acrylamide-co-4-vinylpyridine) [poly(AAM-co-4-VP)]. The poly(AAM-co-4-VP) was fabricated using frontal polymerization within 5 min in an easy and rapid way and then was pyrolyzed to afford CDs. The as-prepared CDs show crystalline structure and excellent dispersibility with particle sizes in the range of 2–4 nm. The optical properties were throughly investigated, and we found the CDs exhibit strong blue fluorescence with quantum yield of ~18 % and excellent photoluminescent stability, which is rarely influenced by the external conditions. This process can be exploited as an effective path for synthesis CDs with polymers by a facile and rapid way.     

THz photomixer with milled nanoelectrodes on LT-GaAs

A terahertz (THz) photomixer: (i) a meander type antenna with integrated nanoelectrodes on (ii) a low temperature grown GaAs has been fabricated and characterized. It was designed for spectral range of 0.3–0.4 THz where molecular fingerprinting and sensing are performed. By combination of electron beam lithography with post-processing using focused ion beam (FIB), milling the THz emitter was successfully fabricated. Nanogaps as small as 40 nm width in the active area of photomixer were milled by FIB. Nanocontacts enhance electric fields of the illuminated and THz radiation and contribute to a better collection of photo-electrons. THz emission was obtained and spectrally characterized.     

Methods of IR spectroscopy in monitoring of chemotherapy of oncological pathologies using palladium complexes

FTIR spectroscopy is used to study mammary-gland tissues of mice with a sarcoma tumor (strain 180). Spectral features that are typical of malignant tumors are revealed in the FTIR spectra in the sarcoma-tumor tissues. Tumor tissues are studied after treatment using coordination compounds based on palladium complexes with 3-amino-1-hydroxypropylidene-1,1-diphosphonic acid and zoledronic acid. A therapeutic effect is not revealed after treatment using palladium complex with 3-amino-1-hydroxypropylidene-1,1-diphosphonic acid. The suppression of tumor growth amounts to 59% when palladium complexes with zoledronic acid are used. Suppression of tumor growth is accompanied by variations in spectral characteristics. With respect to diagnostic features, the FTIR spectra of tumor tissues after treatment with the palladium complexes with zoledronic acid are similar to the FTIR spectra of tissues that are free of malignant tumors. Specific spectroscopic characteristics that make it possible to control the chemotherapy of oncological pathologies are determined.     

Label Free Fluorometric Characterization of DNA Interaction with Cholate Capped Gold Nanoparticles Using Ethidium Bromide as a Fluorescent Probe

We demonstrated label free ethidium bromide assisted characterization of DNA interaction with cholate capped AuNPs. Interactions between ss/ds DNA and AuNPs with two different lengths (0.5 and 0.85 kb) were analyzed through fluorescence spectrophotometer and agrose gel electrophoresis analysis. Further results were confirmed by UV–globally visible spectrophotometer, DLS and TEM. As 0.5 and 0.85 kb of ssDNA effectively interacted with AuNPs through the van der Waals interaction which consequently led to the prevention of salt induced aggregation, EtBr intercalations as well as fluorescence shift with less binding constant 0.098 and 0.108 μM, respectively. On the contrary, the same length of dsDNA (0.5 and 0.85 kb) not interacted with AuNPs which led to the NPs aggregation, EtBr intercalation as well as fluorescence shift with increased binding constant 0.166 and 0.599 μM, respectively. This approach helped to understand the mode of interactions of DNA with cholate capped AuNPs without any modifications in a simple method and the results could be readout through the naked eye under the UV transilluminator. Figure

Fluorometric characterization of interaction of different lengths of ss/dsDNA with cholate capped AuNPs using EtBr as fluorescence probe