IMPROVED DETECTION OF TIME WINDOWS OF BRAIN RESPONSES IN fMRI USING MODIFIED TEMPORAL CLUSTERING ANALYSIS

Temporal clustering analysis (TCA) has been proposed recently as a method to detect time windows of brain responses in functional MRI (fMRI) studies when the timing and location of the activation are completely unknown. Modifications to the TCA technique are introduced in this report to further improve the sensitivity in detecting brain activation.     

Improved temporal clustering analysis method applied to whole-brain data in acupuncture fMRI study

Temporal clustering analysis (TCA) has been proposed as a method for detecting the brain responses of a functional magnetic resonance imaging (fMRI) time series when the time and location of activation are completely unknown. But TCA is not suitable for treating the time series of the whole brain due to the existence of many inactive pixels. In theory, active pixels are located only in gray matter (GM). In this study, SPM2 was used to segment functional images into GM, white matter and cerebrospinal fluid, and only the pixels in GM were considered. Thus, most of inactive pixels are deleted, so that the sensitivity of TCA is greatly improved in the analysis of the whole brain. The same set of acupuncture fMRI data was treated using both conventional TCA and modified TCA (MTCA) for comparing their analytical ability. The results clearly show a significant improvement in the sensitivity achieved by MTCA.     

Improved detection of time windows of brain responses in fMRI using modified temporal clustering analysis

Temporal clustering analysis (TCA) has been proposed recently as a method to detect time windows of brain responses in functional MRI (fMRI) studies when the timing and location of the activation are completely unknown. Modifications to the TCA technique are introduced in this report to further improve the sensitivity in detecting brain activation. The modified TCA is based on the integrated signal intensity of a temporal cluster at each time point, while the original TCA is based only on the size of a temporal cluster at each time point. A temporal cluster at each time point is defined, in both TCA methods, as a group of pixels reaching their maximum (or minimum) values at the same time. Both computer simulation and in vivo fMRI experiments have been performed. Compared with the original TCA, the modified TCA shows a significant improvement in the sensitivity to detect activation peaks for determining time windows of brain responses.     

Preoperative localization of the sensorimotor area using independent component analysis of resting-state fMRI

Analysis of resting-state functional magnetic resonance imaging (fMRI) data is based on detecting low-frequency signal fluctuations in functionally connected brain areas. These synchronous fluctuations in resting-state networks have been observed in several studies with healthy subjects. In this study, we explored if independent component analysis (ICA) can be used to localize the sensorimotor area from resting-state fMRI data in patients with brain tumors. Finger-tapping activation task and resting-state blood-oxygenation-level-dependent fMRI data were acquired from 8 patients with brain tumors and 10 healthy volunteers. Sensorimotor task independent components (IC_task) were used to verify resting-state independent components (IC_rest) individually. In addition, sensorimotor IC_rests were compared between the groups and no significant differences were detected in volume, spatial correlation or temporal correlation. These results show that it is possible to localize a sensorimotor area from resting-state data using ICA in patients with brain tumors. This offers a complementary method for assessing the sensorimotor area in subjects with brain tumors who have difficulties in performing motor paradigms.     

Dissecting cognitive stages with time-resolved fMRI data: a comparison of fuzzy clustering and independent component analysis

In combination with cognitive tasks entailing sequences of sensory and cognitive processes, event-related acquisition schemes allow using functional MRI to examine not only the topography but also the temporal sequence of cortical activation across brain regions (time-resolved fMRI). In this study, we compared two data-driven methods--fuzzy clustering method (FCM) and independent component analysis (ICA)--in the context of time-resolved fMRI data collected during the performance of a newly devised visual imagery task. We analyzed a multisubject fMRI data set using both methods and compared their results in terms of within- and between-subject consistency and spatial and temporal correspondence of obtained maps and time courses. Both FCM and spatial ICA allowed discriminating the contribution of distinct networks of brain regions to the main cognitive stages of the task (auditory perception, mental imagery and behavioural response), with good agreement across methods. Whereas ICA worked optimally on the original time series, averaging with respect to the task onset (and thus introducing some a priori information on the stimulation protocol) was found to be indispensable in the case of FCM. On averaged time series, FCM led to a richer decomposition of the spatio-temporal patterns of activation and allowed a finer separation of the neurocognitive processes subserving the mental imagery task. This study confirms the efficacy of the two examined methods in the data-driven estimation of hemodynamic responses in time-resolved fMRI studies and provides empirical guidelines to their use.     

Iterative temporal clustering analysis for the detection of multiple response peaks in fMRI

The temporal clustering analysis (TCA) is a novel and effective technique for obtaining brain activation maps when the timing and location of the activation are completely unknown. Performing the TCA method once can only detect the largest peak of the activation time windows well, if multiple response peaks at the same location of the brain occur. However, this limitation can be removed by using a TCA method in an iterative way in order for the smaller peaks to be detected. Our in vivo fMRI experiments with event-related visual tasks have demonstrated this ability.     

Combining independent component analysis and correlation analysis to probe interregional connectivity in fMRI task activation datasets

A new approach in studying interregional functional connectivity using functional magnetic resonance imaging (fMRI) is presented. Functional connectivity may be detected by means of cross correlating time course data from functionally related brain regions. These data exhibit high temporal coherence of low frequency fluctuations due to synchronized blood flow changes. In the past, this fMRI technique for studying functional connectivity has been applied to subjects that performed no prescribed task ("resting" state). This paper presents the results of applying the same method to task-related activation datasets. Functional connectivity analysis is first performed in areas not involved with the task. Then a method is devised to remove the effects of activation from the data using independent component analysis (ICA) and functional connectivity analysis is repeated. Functional connectivity, which is demonstrated in the "resting brain," is not affected by tasks which activate unrelated brain regions. In addition, ICA effectively removes activation from the data and may allow us to study functional connectivity even in the activated regions.     

Cortex-based independent component analysis of fMRI time series

The cerebral cortex is the main target of analysis in many functional magnetic resonance imaging (fMRI) studies. Since only about 20% of the voxels of a typical fMRI data set lie within the cortex, statistical analysis can be restricted to the subset of the voxels obtained after cortex segmentation. While such restriction does not influence conventional univariate statistical tests, it may have a substantial effect on the performance of multivariate methods.

Here, we describe a novel approach for data-driven analysis of single-subject fMRI time series that combines techniques for the segmentation and reconstruction of the cortical surface of the brain and the spatial independent component analysis (sICA) of the functional time courses (TCs). We use the mesh of the white matter/gray matter boundary, automatically reconstructed from high-spatial-resolution anatomical MR images, to limit the sICA decomposition of a coregistered functional time series to those voxels which are within a specified region with respect to the cortical sheet (cortex-based ICA, or cbICA). We illustrate our analysis method in the context of fMRI blocked and event-related experimental designs and in an fMRI experiment with perceptually ambiguous stimulation, in which an a priori specification of the stimulation protocol is not possible.

A comparison between cbICA and conventional hypothesis-driven statistical methods shows that cortical surface maps and component TCs blindly obtained with cbICA reliably reflect task-related spatiotemporal activation patterns. Furthermore, the advantages of using cbICA when the specification of a temporal model of the expected hemodynamic response is not straightforward are illustrated and discussed. A comparison between cbICA and anatomically unconstrained ICA reveals that — beside reducing computational demand — the cortex-based approach improves the fitting of the ICA model in the gray matter voxels, the separation of cortical components and the estimation of their TCs, particularly in the case of fMRI data sets with a complex spatiotemporal statistical structure.     

Quantification of venous blood signal contribution to BOLD functional activation in the auditory cortex at 3 T

Most modern techniques for functional magnetic resonance imaging (fMRI) rely on blood-oxygen-level-dependent (BOLD) contrast as the basic principle for detecting neuronal activation. However, the measured BOLD effect depends on a transfer function related to neurophysiological changes accompanying electrical neural activation. The spatial accuracy and extension of the region of interest are determined by vascular effect, which introduces incertitude on real neuronal activation maps. Our efforts have been directed towards the development of a new methodology that is capable of combining morphological, vascular and functional information; obtaining new insight regarding foci of activation; and distinguishing the nature of activation on a pixel-by-pixel basis. Six healthy volunteers were studied in a parametric auditory functional experiment at 3 T; activation maps were overlaid on a high-resolution brain venography obtained through a novel technique. The BOLD signal intensities of vascular and nonvascular activated voxels were analyzed and compared: it was shown that nonvascular active voxels have lower values for signal peak (P<10(-7)) and area (P<10(-8)) with respect to vascular voxels. The analysis showed how venous blood influenced the measured BOLD signals, supplying a technique to filter possible venous artifacts that potentially can lead to misinterpretation of fMRI results. This methodology, although validated in the auditory cortex activation, maintains a general applicability to any cortical fMRI study, as the basic concepts on which it relies on are not limited to this cortical region. The results obtained in this study can represent the basis for new methodologies and tools that are capable of adding further characterization to the BOLD signal properties.     

An improved temporal clustering analysis method applied to whole-brain data in fMRI study

Temporal clustering analysis (TCA) has been proposed as a method to detect the brain responses of an fMRI time series when the time and location of the activation are completely unknown. But TCA is still incompetent in dealing with the time series of the whole brain due to the existence of many inactive pixels. If only active pixels are considered, the sensitivity of TCA will be improved greatly and it could be applied to the whole brain. In this study, some modifications were made to TCA to remove inactive pixels, and the applicability of the modified TCA to the whole brain was validated with a set of visual fMRI data. Based on the time series of the modified TCA, activations of the whole brain corresponding to the visual stimulation were detected. Compared with the previous TCA, the modified TCA method shows a significant improvement in the sensitivity to detect activation peaks of the whole brain.     

Discussion on the choice of separated components in fMRI data analysis by spatial independent component analysis

By measuring the changes of magnetic resonance signals during a stimulation, the functional magnetic resonance imaging (fMRI) is able to localize the neural activation in the brain. In this report, we discuss the fMRI application of the spatial independent component analysis (spatial ICA), which maximizes statistical independence over spatial images. Included simulations show the possibility of the spatial ICA on discriminating asynchronous activations or different response patterns in an fMRI data set. An in vivo visual stimulation fMRI test was conducted, and the result shows a proper sum of the separated components as the final image is better than a single component, using fMRI data analysis by spatial ICA. Our result means that spatial ICA is a useful tool for the detection of different response activations and suggests that a proper sum of the separated independent components should be used for the imaging result of fMRI data processing.     

Performance of blind source separation algorithms for fMRI analysis using a group ICA method

Independent component analysis (ICA) is a popular blind source separation technique that has proven to be promising for the analysis of functional magnetic resonance imaging (fMRI) data. A number of ICA approaches have been used for fMRI data analysis, and even more ICA algorithms exist; however, the impact of using different algorithms on the results is largely unexplored. In this paper, we study the performance of four major classes of algorithms for spatial ICA, namely, information maximization, maximization of non-Gaussianity, joint diagonalization of cross-cumulant matrices and second-order correlation-based methods, when they are applied to fMRI data from subjects performing a visuo-motor task. We use a group ICA method to study variability among different ICA algorithms, and we propose several analysis techniques to evaluate their performance. We compare how different ICA algorithms estimate activations in expected neuronal areas. The results demonstrate that the ICA algorithms using higher-order statistical information prove to be quite consistent for fMRI data analysis. Infomax, FastICA and joint approximate diagonalization of eigenmatrices (JADE) all yield reliable results, with each having its strengths in specific areas. Eigenvalue decomposition (EVD), an algorithm using second-order statistics, does not perform reliably for fMRI data. Additionally, for iterative ICA algorithms, it is important to investigate the variability of estimates from different runs. We test the consistency of the iterative algorithms Infomax and FastICA by running the algorithm a number of times with different initializations, and we note that they yield consistent results over these multiple runs. Our results greatly improve our confidence in the consistency of ICA for fMRI data analysis.     

Separating 4D multi-task fMRI data of multiple subjects by independent component analysis with projection

Independent component analysis (ICA) is a widely accepted method to extract brain networks underlying cognitive processes from functional magnetic resonance imaging (fMRI) data. However, the application of ICA to multi-task fMRI data is limited due to the potential non-independency between task-related components. The ICA with projection (ICAp) method proposed by our group (Hum Brain Mapp 2009;30:417–31) is demonstrated to be able to solve the interactions among task-related components for single subject fMRI data. However, it still must be determined if ICAp is capable of processing multi-task fMRI data over a group of subjects. Moreover, it is unclear whether ICAp can be reliably applied to event-related (ER) fMRI data. In this study, we combined the projection method with the temporal concatenation method reported by Calhoun (Hum Brain Mapp 2008;29:828–38), referred to as group ICAp, to perform the group analysis of multi-task fMRI data. Both a human fMRI rest data-based simulation and real fMRI experiments, of block design and ER design, verified the feasibility and reliability of group ICAp, as well as demonstrated that ICAp had the strength to separate 4D multi-task fMRI data into multiple brain networks engaged in each cognitive task and to adequately find the commonalities and differences among multiple tasks.     

A SVM-based quantitative fMRI method for resting-state functional network detection

Resting-state functional magnetic resonance imaging (fMRI) aims to measure baseline neuronal connectivity independent of specific functional tasks and to capture changes in the connectivity due to neurological diseases. Most existing network detection methods rely on a fixed threshold to identify functionally connected voxels under the resting state. Due to fMRI non-stationarity, the threshold cannot adapt to variation of data characteristics across sessions and subjects, and generates unreliable mapping results. In this study, a new method is presented for resting-state fMRI data analysis. Specifically, the resting-state network mapping is formulated as an outlier detection process that is implemented using one-class support vector machine (SVM). The results are refined by using a spatial-feature domain prototype selection method and two-class SVM reclassification. The final decision on each voxel is made by comparing its probabilities of functionally connected and unconnected instead of a threshold. Multiple features for resting-state analysis were extracted and examined using an SVM-based feature selection method, and the most representative features were identified. The proposed method was evaluated using synthetic and experimental fMRI data. A comparison study was also performed with independent component analysis (ICA) and correlation analysis. The experimental results show that the proposed method can provide comparable or better network detection performance than ICA and correlation analysis. The method is potentially applicable to various resting-state quantitative fMRI studies.     

Surface-based functional magnetic resonance imaging analysis of partial brain echo planar imaging data at 1.5 T

Surface-based functional magnetic resonance imaging (fMRI) analysis is more sensitive and accurate than volume-based analysis for detecting neural activation. However, these advantages are less important in practical fMRI experiments with commonly used 1.5-T magnetic resonance devices because of the resolution gap between the echo planar imaging data and the cortical surface models. We expected high-resolution segmented partial brain echo planar imaging (EPI) data to overcome this problem, and the activation patterns of the high-resolution data could be different from the low-resolution data. For the practical applications of surface-based fMRI analysis using segmented EPI techniques, the effects of some important factors (e.g., activation patterns, registration and local distortions) should be intensively evaluated because the results of surface-based fMRI analyses could be influenced by them. In this study, we demonstrated the difference between activations detected from low-resolution EPI data, which were covering whole brain, and high-resolution segmented EPI data covering partial brain by volume- and surface-based analysis methods. First, we compared the activation maps of low- and high-resolution EPI datasets detected by volume- and surface-based analyses, with the spatial patterns of activation clusters, and analyzed the distributions of activations in occipital lobes. We also analyzed the high-resolution EPI data covering motor areas and fusiform gyri of human brain, and presented the differences of activations detected by volume- and surface-based methods.     

A variant of logistic transfer function in Infomax and a postprocessing procedure for independent component analysis applied to fMRI data

Independent component analysis with Infomax algorithm can separate functional magnetic resonance imaging (fMRI) data into independent spatial components (brain activation maps) and their associated time courses. In the current study, we propose a variant of the logistic transfer function in Infomax, referred to as a-logistic Infomax, and a postprocessing procedure to combine a consistently task-related (CTR) component with transiently task-related (TTR) components for a better definition of brain functional localization. This a-logistic Infomax introduced parameter a into the standard logistic transfer function of conventional Infomax algorithm. For postprocessing method, we suggest the use of a stepwise linear regression of CTR and TTR components to fit reference function and then to sum up with different weights only those with significant contributions to the reference function in order to obtain a task component activation map. The effectiveness of both approaches on separating components and functional localization was evaluated with simulated and real fMRI data.     

Investigating the neural basis for fMRI-based functional connectivity in a blocked design: application to interregional correlations and psycho-physiological interactions

This paper investigates how well different kinds of fMRI functional connectivity analysis reflect the underlying interregional neural interactions. This is hard to evaluate using real experimental data where such relationships are unknown. Rather, we use a biologically realistic neural model to simulate both neuronal activities and multiregional fMRI data from a blocked design. Because we know how every element in the model is related to every other element, we can compare functional connectivity measurements across different spatial and temporal scales. We focus on (1) psycho-physiological interaction (PPI) analysis, which is a simple brain connectivity method that characterizes the activity in one brain region by the interaction between another region's activity and a psychological factor, and (2) interregional correlation analysis. We investigated the neurobiological underpinnings of PPI using simulated neural activities and fMRI signals generated by a large-scale neural model that performs a visual delayed match-to-sample task. Simulated fMRI data are generated by convolving integrated synaptic activities (ISAs) with a hemodynamic response function. The simulation was done under three task conditions: high-attention, low-attention and a control task ('passive viewing'). We investigated how biological and scanning parameters affect PPI and compared these with functional connectivity measures obtained using correlation analysis. We performed correlational and PPI analyses with three types of time-series data: ISA, fMRI and deconvolved fMRI (which yields estimated neural signals) obtained using a deconvolution algorithm. The simulated ISA can be considered as the 'gold standard' because it represents the underlying neural activity. Our main findings show (1) that evaluating the change in an interregional functional connection using the difference in regression coefficients (as is essentially done in the PPI method) produces results that better reflect the underlying changes in neural interrelationships than does evaluating the functional connectivity difference as a change in correlation coefficient; (2) that using fMRI and deconvolved fMRI data led to similar conclusions in the PPI-based functional connectivity results, and these generally agreed with the nature of the underlying neural interactions; and (3) the functional connectivity correlation measures often led to different conclusions regarding significance for different scanning and hemodynamic parameters, but the significances of the PPI regression parameters were relatively robust. These results highlight the way in which neural modeling can be used to help validate the inferences one can make about functional connectivity based on fMRI data.     

Validating the performance of one-time decomposition for fMRI analysis using ICA with automatic target generation process

Independent component analysis (ICA) has been proven to be effective for functional magnetic resonance imaging (fMRI) data analysis. However, ICA decomposition requires to optimize the unmixing matrix iteratively whose initial values are generated randomly. Thus the randomness of the initialization leads to different ICA decomposition results. Therefore, just one-time decomposition for fMRI data analysis is not usually reliable. Under this circumstance, several methods about repeated decompositions with ICA (RDICA) were proposed to reveal the stability of ICA decomposition. Although utilizing RDICA has achieved satisfying results in validating the performance of ICA decomposition, RDICA cost much computing time. To mitigate the problem, in this paper, we propose a method, named ATGP-ICA, to do the fMRI data analysis. This method generates fixed initial values with automatic target generation process (ATGP) instead of being produced randomly. We performed experimental tests on both hybrid data and fMRI data to indicate the effectiveness of the new method and made a performance comparison of the traditional one-time decomposition with ICA (ODICA), RDICA and ATGP-ICA. The proposed method demonstrated that it not only could eliminate the randomness of ICA decomposition, but also could save much computing time compared to RDICA. Furthermore, the ROC (Receiver Operating Characteristic) power analysis also denoted the better signal reconstruction performance of ATGP-ICA than that of RDICA.     

Analysis of functional networks involved in motor execution and motor imagery using combined hierarchical clustering analysis and independent component analysis

Cognitive experiments involving motor execution (ME) and motor imagery (MI) have been intensively studied using functional magnetic resonance imaging (fMRI). However, the functional networks of a multitask paradigm which include ME and MI were not widely explored. In this article, we aimed to investigate the functional networks involved in MI and ME using a method combining the hierarchical clustering analysis (HCA) and the independent component analysis (ICA). Ten right-handed subjects were recruited to participate a multitask experiment with conditions such as visual cue, MI, ME and rest. The results showed that four activation clusters were found including parts of the visual network, ME network, the MI network and parts of the resting state network. Furthermore, the integration among these functional networks was also revealed. The findings further demonstrated that the combined HCA with ICA approach was an effective method to analyze the fMRI data of multitasks.     

Detecting functional connectivity in the resting brain: a comparison between ICA and CCA

Independent component analysis (ICA) and cross-correlation analysis (CCA) are general tools for detecting resting-state functional connectivity. In this study, we jointly evaluated these two approaches based on simulated data and in vivo functional magnetic resonance imaging data acquired from 10 resting healthy subjects. The influence of the number of independent components (maps) on the results of ICA was investigated. The influence of the selection of the seeds on the results of CCA was also examined. Our results reveal that significant differences between these two approaches exist. The performance of ICA is superior as compared with that of CCA; in addition, the performance of ICA is not significantly affected by structured noise over a relatively large range. The results of ICA could be affected by the number of independent components if this number is too small, however. Converting the spatially independent maps of ICA into z maps for thresholding tends to overestimate the false-positive rate. However, the overestimation is not very severe and may be acceptable in most cases. The results of CCA are dependent on seeds location. Seeds selected based on different criteria will significantly affect connectivity maps.