首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 125 毫秒
1.
童元伟  田双  庄松林 《物理学报》2011,60(5):54201-054201
本文采用硅柱子周期性排列构成六角结构光子晶体,用平面波展开方法和FDTD方法研究表明,此结构光子晶体存在等效折射率接近-1的频率区域.在等效折射率趋于-1但不等于-1时,此光子晶体平板结构超透镜能形成一个非近场的像.模拟还发现,此结构平板光子晶体等效折射率为非-1时,可以亚波长成像. 关键词: 负折射 光子晶体 亚波长 成像  相似文献   

2.
湛胜高  梁斌明  朱幸福  陈家壁  庄松林 《物理学报》2014,63(15):154212-154212
负折射率材料因为其奇异的特性成为广泛研究的对象,尤其是光子晶体平板的完美成像.本文采用空气孔在硅介质中周期性排列构成六角结构的光子晶体结构,用平面波展开法及FDTD方法,研究了该光子晶体的亚波长成像能力还研究了入射波长以及温度漂移对该光子晶体平面亚波长成像的影响.  相似文献   

3.
运用色散特性分析的方法,在六角形晶格光子晶体能带结构的布里渊区中心找到了狄拉克点,用等效媒质理论验证了在这一点上光子晶体的等效介电常量和等效磁导率同时为零,即存在狄拉克频点,用此六角形晶格光子晶体可以实现零折射率材料,随后运用有限元数值仿真方法,研究了此六角形晶格结构在狄拉克频点及其附近所呈现的零折射率特性,将此种六角形晶格光子晶体经过合理设计用以制作凹透镜,发现可以实现远场的亚波长聚焦,此外在凹透镜的入射面处引入防反射结构可以在一定程度上增强聚焦效果,提高了系统的分辨率.  相似文献   

4.
程星亮  程丽彬  豆振领  张冠茂 《光子学报》2014,41(12):1474-1478
运用色散特性分析的方法,在六角形晶格光子晶体能带结构的布里渊区中心找到了狄拉克点,用等效媒质理论验证了在这一点上光子晶体的等效介电常量和等效磁导率同时为零,即存在狄拉克频点,用此六角形晶格光子晶体可以实现零折射率材料.随后运用有限元数值仿真方法,研究了此六角形晶格结构在狄拉克频点及其附近所呈现的零折射率特性.将此种六角形晶格光子晶体经过合理设计用以制作凹透镜,发现可以实现远场的亚波长聚焦.此外在凹透镜的入射面处引入防反射结构可以在一定程度上增强聚焦效果,提高了系统的分辨率.  相似文献   

5.
利用平面波展开法对由硅(Si)介质柱构成的二维正方晶格光子晶体在TM模式下的能带进行计算。构造了光子晶体微腔,利用时域有限差分法对该光子晶体微腔的谐振特性进行了数值模拟,得到了缺陷态模场分布。考虑硅的热膨胀效应和热光效应对硅性质的影响,引入到光子晶体微腔谐振模式的计算中,模拟计算了微腔谐振波长随温度的变化关系。结果表明,随着温度的升高光子晶体微腔的谐振波长增大,温度每升高1℃,波长向长波漂移6.7pm,而且具有良好的线性。光子晶体微腔的这种特性可以用于温度传感,具有一定的实用意义。  相似文献   

6.
李国俊  康学亮  李永平 《物理学报》2007,56(11):6403-6407
利用有限时域差分法研究了一种二维蜂窝格子光子晶体的远场亚波长成像特性,发现和折射率为-1时的负折射成像规律符合得很好.但是由于晶格结构本身的特性,入射光以大角度入射时,这种结构的耦合效率很低,影响了像的强度和质量.通过适当改变界面上介质柱的半径的方法可以提高耦合效率,进而有效提高成像的质量和强度.  相似文献   

7.
利用平面波展开方法计算了波状结构二维光子晶体(2DPC)的等频面,对等频面内矩形轮廓的等频线进行研究,提出了波状结构2DPC的自准直特性,运用时域有限差分(FDTD)方法模拟了波状结构2DPC在不同入射角情况下对所入射高斯光束的自准直作用.将波状结构2DPC的自准直特性运用到近场亚波长成像,模拟了波状结构2DPC的自准直亚波长成像效果,单光源的成像分辨率达到0.28λ,且随着光源逐渐远离近场范围而降低. 关键词: 光子晶体 自准直 等频面 亚波长成像  相似文献   

8.
最近实验证明周期性的光子晶体中存在电磁波的负折射现象,并且观测到亚波长成像.然而,这些研究主要集中在剧期性结构中,对非周期结构的研究还没有相关的报道。文章报道了一种新的理论和实验结果:非周期性十二重准晶光子结构同样存在负折射,并且可以实现超透镜的远场成像。具有这些特性的光子准晶可以广泛的应用于光集成器件中。  相似文献   

9.
张乐欣  张冉  李志全 《光学技术》2007,33(4):584-586
在一维光子晶体光学传输特性理论的基础上,运用传输矩阵法推导了一维多孔硅光子晶体的反射特性,并对其反射特性与结构参数的关系进行了分析。给出了采用脉冲电化学阳极腐蚀法制备一维多孔硅光子晶体的制作模型。利用计算机数值模拟的方法给出了各种一维多孔硅光子晶体的典型反射谱。为多孔硅光子晶体的实际应用奠定了理论基础。  相似文献   

10.
波状结构二维光子晶体近场亚波长成像的研究   总被引:7,自引:5,他引:2  
研究了波状结构二维光子晶体(2DPC)在红外波段的负折射近场成像,对其等频面进行了分析,指出波状结构二维光子晶体无法实现负折射远场成像的原因在于缺少与入射介质等频面相匹配的光子晶体圆形等频面,所用的矩形等频面使波状膜层二维光子晶体不可避免地具有各向异性特征,进而将成像限制在近场范围内。采用时域有限差分(时域有限差分)方法模拟了不同厚度的波状结构二维光子晶体近场成像效果,当厚度为两倍栅格常量时,单光源的成像分辨力为0.28λ,达到亚波长分辨效果。分辨力随着光源逐渐远离近场范围而降低,而像点的位置基本不随光源距离和光子晶体厚度的变化而改变。双光源的成像模拟进一步验证了波状结构二维光子晶体的近场亚波长成像能力,分辨力达到0.35λ,但成像质量受光子晶体厚度变化的影响较大。  相似文献   

11.
Self-collimation characteristics of the two-dimensional square-lattice photonic crystal(PC) consisting of metal rods immersed in silicon are studied by the finite-difference time-domain method.The Drude dispersion model is adopted to describe the metal rod,and the self-collimation behaviours of the near-infrared light through the PC are studied.The frequency region and the tolerance of incident angle for the self-collimation behaviour can be controlled by changing the shape of the metal rods.  相似文献   

12.
Negative refraction and subwavelength imaging properties of a two-dimensional (2D) photonic crystal (PC) slab are studied by the finite-difference time-domain method. The PC consists of a triangular lattice of air holes immersed in a dielectric. For a certain frequency range in the third photonic band, the directions of the group velocities and the phase velocities can be opposite, so the PC can work as a kind of negative refractive-index material. The light radiated from a point source can form a subwavelength image spot through the PC slab. Negative refraction and an effective refractive index of the PC slab n = -1 can be achieved for the incident wave with its incident angle within a certain range.  相似文献   

13.
We experimentally demonstrate subwavelength resolution imaging at microwave frequencies by a three-dimensional (3D) photonic-crystal flat lens using full 3D negative refraction. The photonic crystal was fabricated in a layer-by-layer process. A subwavelength pinhole source and a dipole detector were employed for the measurement. By point-by-point scanning, we obtained the image of the pinhole source shown in both amplitude and phase, which demonstrated the imaging mechanism and subwavelength feature size in all three dimensions. An image of two pinhole sources with subwavelength spacing showed two resolved spots, which further verified subwavelength resolution.  相似文献   

14.
We report the imaging properties of a two-dimensional rectangular-lattice photonic crystal (PC) slab consisting of rectangular metallic rods immersed in a dielectric background. By simulating the electromagnetic wave propagation through such a PC slab with the finite-difference time-domain method, we find that a point source placed in the vicinity of the PC slab can form a good-quality image through the slab. The frequency region where a good-quality image is formed can be controlled by choosing the direction along which the PC slab surface normal is placed.  相似文献   

15.
The problem of subwavelength imaging via a photonic crystal slab lens made of two-dimensional (2D) square arrays of parallel dielectric cylinders in air is studied and discussed theoretically. The finite-difference time-domain method is employed to investigate the unique features of imaging by such lens. We confirm earlier findings that a photonic crystal slab lens can provide the imaging of a point source. By analysing the transmission properties of the proposed structure, we demonstrate that inside the all-angle negative refraction, there are some favourable directions for waves to travel. We show that the surface termination of the photonic crystal is a key parameter to obtain a good quality image. The super-resolution of two sources separated by a distance less than the wavelength is also considered. It is shown that the achievable resolution is limited by the slab length.  相似文献   

16.
Imaging properties of a two-dimensional photonic crystal slab lens are investigated through the finite-difference time-domain method. In this paper, we consider the photonic crystal slab consisting of a square lattice of square metallic rods immersed in a dielectric background. Through the analysis of the equifrequency-surface contours and the field patterns of a point source placed in the vicinity of the photonic crystal slab, we find that a good-quality image can form at the frequencies in the second TM-polarized photonic band. Comparing the images formed at different frequencies, we can clearly see that an excellent-quality image is formed by the mechanisms of simultaneous action of the self-collimation effect and the negative-refraction effect.  相似文献   

17.
We study the imaging process for a photonic crystal slab lens with a surface defect by the finite-difference-time-domain (FDTD) method. We demonstrate an odd surface mode with a specific dispersion curve in this system. The dispersion curve has an extreme point, which is corresponding to a slow light. If the working frequency is chosen at this extreme point the subwavelength resolution of image will be enhanced. Moreover, the subwavelength resolution of image is very sensitive to the position of this extreme point in the dispersion diagram. Longer interaction time and better field distribution may give a qualitative physical understanding for the enhancement of imaging quality.  相似文献   

18.
仲义  许吉  陆云清  王敏娟  王瑾 《物理学报》2014,63(23):237801-237801
柱矢量光束具有柱对称性的偏振分布,其独特的光场分布和聚焦特性被广泛应用于光学微操纵及光学成像等领域,并迅速向亚波长尺度拓展.通常,亚波长尺度聚焦采用等离激元透镜实现,但存在光场调控的偏振态局限性.而借助光子晶体的负折射效应,不仅能够实现亚波长聚焦或成像,而且应对正交偏振态同时有效.采用对电磁波具有更强调控能力的一维金属光子晶体结构,计算得到的能带结构和等频曲线表明其负折射效应在特定波段对正交偏振态同时有效.在此基础上设计出一维金属光子晶体柱对称平凹镜结构,通过有限元算法模拟显示了可见光波段的径向和旋向偏振光的同时亚波长聚焦行为.进一步的结果表明,改变柱矢量光束的偏振组分能够直接有效地调节焦场空间分布及偏振分布特性.所提出的平凹镜结构能够实现对任意偏振组分的柱矢量光束的亚波长尺度聚焦,且该结构的设计对于各波段情况均有参考意义.该研究结果对小尺度粒子的光学微操纵、超分辨率成像等相关领域具有潜在的应用价值.  相似文献   

19.
Imaging properties and negative refraction of the two-dimensional metallic photonic crystal (PC) consisting of a triangular lattice of silver rods immersed in a dielectric is studied. It is found that good-quality image spots and negative refraction with an effective refractive index of ?1 can be achieved for the near-infrared frequency through the adjustment of the metallic PC's lattice constant and the permittivity of the background material together. Drude dispersion model is adopted to describe the silver rod and it is found that the influence of the metal's absorption is trivial to debase the quality of the image spot.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号