色偏振的理论及应用

本文就色偏振的理论作了详尽的分析。重点分析振幅Ａ１、Ａ２与角φ的关系，区别单色的干涉光与非干涉的白色背景光，得出在色偏振中光强、色纯度、互补色、变色位置和色调变化的规律。同时也对某些应用作了探讨。     

Applying colour science in colour design

Although colour science has been widely used in a variety of industries over the years, it has not been fully explored in the field of product design. This paper will initially introduce the three main application fields of colour science: colour specification, colour-difference evaluation and colour appearance modelling. By integrating these advanced colour technologies together with modern colour imaging devices such as display, camera, scanner and printer, some computer systems have been recently developed to assist designers for designing colour palettes through colour selection by means of a number of widely used colour order systems, for creating harmonised colour schemes via a categorical colour system, for generating emotion colours using various colour emotional scales and for facilitating colour naming via a colour-name library. All systems are also capable of providing accurate colour representation on displays and output to different imaging devices such as printers.     

Colour and lighting in hospital design

Little information or guidance has been available to assist the development of a hospital's visual environment. A report on lighting and colour design schemes, accessible to non professionals with responsibility for refurbishment strategies, was required by NHS Estates. Firstly, 20 hospitals were audited to establish a picture of current practice and to identify key issues where colour design could broadly enhance the environment for patients, staff and visitors. Critical areas were outlined in this report, where colour design can be utilised and applied, for the benefit of all users, from ambience to essential legal requirements such as colour contrast for the visually impaired.Provision of staff relaxation rooms that are different in terms of colour and lux levels from immediate work spaces, or thoughtfully designed areas for patients awaiting intensive treatment, have been shown to have some beneficial effects on a sense of well being. Colour and design have not been established as a definite cure for sickness and ill health, but certainly monotony and poor conditions in premises that have not been refurbished with any care, have had a detrimental affect on recovery rates and staff morale. The realisation that a well balanced and attractive environment is of major importance to patients’ health is, in no way new; Florence Nightingale observed that ‘a variety of form and brilliance of colour in the objects presented to patients are an actual means of recovery’.     

Luminescence characteristics of Eu2+ activated Ca2SiO4 Sr2SiO4 and Ba2SiO4 phosphorsfor white LEDs

<正>This paper investigates the luminescence characteristics of Eu²⁺ activated Ca₂SiO₄,Sr₂SiO₄ and Ba₂SiO₄ phosphors. Two emission bands are assigned to the f-d transitions of Eu²⁺ ions doped into two different cation sites in host lattices,and show different emission colour variation caused by substituting M²⁺ cations for smaller cations.This behaviour is discussed in terms of two competing factors of the crystal field strength and covalence.These phosphors with maximum excitation of around 370 nm can be applied as a colour-tunable phosphor for light-emitting diodes（LEDs） based on ultraviolet chip/phosphor technology.     

Contemporary artists and colour: Meaning, organisation and understanding

What implications do the ranges of traditional and non-traditional media used by contemporary artists have for understanding the selection and specification of coloured materials? Interviews with prominent artists explore their use of colour and their views on the role of colour in their work. The paper establishes that the interview respondents operate successfully within a professional and permeable frame of reference, with different approaches to determination of colour meaning. The colour propositions of neuroscience, psychophysics and anthropological linguistics appear to have little impact on the respondents’ practice, and the paper concludes by suggesting the need to explore boundaries between disciplines.     

Then and now: James Clerk Maxwell and colour

A survey of the researches of James Clerk Maxwell into the production and perception of colour is presented, and links to a selection of present day applications of colour science are indicated. Although false colour photography was not known in Maxwell's time, aspects of his work, suitably interpreted, have a bearing on the wide applicability of the technique. An outline is given of one application of false colour to visualising and analysing data on fluid motion.     

Quantitative measurements in thermo-fluid dynamics based on colour processing

Colour can be expressed as a weighted combination of three attributes: hue, intensity, and saturation. Non-coherent light reflected by thermo-sensitive liquid crystals holds a variable hue, moving in a generally narrow temperature interval and also depending on its inclination with respect to the plane of the crystals and on the characteristics of the impinging light. In experimental practice it is not feasible to ensure uniform lighting over an extensive area and its entire view under the same angle. Thus, the acquired hue field is non-uniform even if the liquid crystal sheet is isothermal. However, by means of proper filtering and calibration of the colour attribute, this optical technique, besides being non-intrusive and inexpensive, is capable of mapping the temperature with an accuracy better than 5% of its measuring-range amplitude. A similar method can be applied for measuring the thickness of a thin liquid film. In this case, the colour attribute to be processed is its intensity. In fact, the light transmitted through a dyed liquid decreases with an increasing thickness of the layer. Again, a perfectly uniform light source is unattainable and the recorded intensity field is non-homogeneous even if the liquid free surface is flat. Nevertheless, the film thickness can be determined by this colour-processing procedure with an accuracy better than 8% of the measuring-range amplitude, which is dictated by the utilised dyestuff concentration. Further thermo-fluid dynamic measurements performed over extensive areas could be handled with analogous methodologies. Surface temperature by emitted infrared waves and void fraction in ducts by light absorption are particular examples.     

White light generation through the zinc metaphosphate glass activated by Ce, Tb and Mn ions

The photoluminescence of Ce³⁺, Tb³⁺ and Mn²⁺ ions was investigated in the Zn(PO₃)₂ glass. The blue and green emissions of Tb³⁺ ions and the red emission of Mn²⁺ ions are enhanced upon UV excitation through a non-radiative energy transfer from Ce³⁺ to Tb³⁺ and Mn²⁺ ions. The efficiency of this transfer was estimated in at least 62%. It is demonstrated that this glass activated with three ions (Ce³⁺, Tb³⁺ and Mn²⁺) can generate white light emission (x=0.420 and y=0.423 chromaticity coordinates and 3440 K colour temperature) under excitation at 254 nm, i.e., using an AlGaN-based LED as excitation source.     

Effects of High-Pressure Treatment on the Sensory Quality of White Grape Juice

The effects of high-pressure treatment on the colour (objective measurement) and sensory characteristics of white grape juice were studied during storage at 4 °C for 60 days. Grape juice was subjected to three different treatments: 400 or 500 MPa at 2 u °C, and 400 MPa at 40 °C during 10 min. Untreated juice was used as control. Colour parameters (CIE L * a * b *), hue angle (tan m 1 b */ a *), chroma {( a * 2 + b * 2 ) 1/2 }, luminosity Q *{(10 2 log( L *) + 100} and saturation S *( C */ L *) were measured. Juices were evaluated for sweetness, acidity, off-flavour and aroma. High-pressure treatments did not affect the colour parameters of juice, and similar sensory characteristics were observed in both control and treated samples on the first day. The colour and sensory characteristics of pressure-treated samples remained more stable than those of the control juice during 60 days of storage. The control juice was slightly fermented developing some changes in flavour and colour.     

Mechanisms of browning development in aggregates of marine organic matter formed under anoxic conditions: A study by mid-infrared and near-infrared spectroscopy

In this paper we analyze some chemical aspects concerning the browning development associated to the aggregation of marine organic matter (MOM) occurring in anoxic conditions. Organic matter samples obtained by the degradation of different algal samples were daily taken to follow the evolution of the aggregation process and the associated browning process. These samples were examined by Fourier transform mid infrared (FTIR) and Fourier transform near infrared (FTNIR) spectroscopy and the colour changes occurring during the above mentioned aggregation process were measured by means of Colour Indices (CIs). Spectral Cross Correlation Analysis (SCCA) was applied to correlate changes in CI values to the structural changes of MOM observed by FTIR and FTNIR spectra which were also submitted to Two-Dimensional Hetero Correlation Analysis (2HDCORR). SCCA results showed that all biomolecules present in MOM aggregates such as carbohydrates, proteins and lipids are involved in the browning development. In particular, SCCA results of algal mixtures suggest that the observed yellow–brown colour can be linked to the development of non enzymatic (i.e. Maillard) browning reactions. SCCA results for MOM furthermore suggest that aggregates coming from brown algae also showed evidence of browning related to enzymatic reactions. In the end 2HDCORR results indicate that hydrogen bond interactions among different molecules of MOM can play a significant role in the browning development.In this study the combination of spectroscopic techniques such as FTIR and FTNIR with Colour Indices measurements shows a peculiar ability to improve the knowledge of the complex mechanisms related to the aggregation of marine organic matter and its colour development under anoxic conditions such like those present in the marine environments at high depth.     

用T值测量仪测量卤钨灯色温

云南光学仪器厂研制的TCY微光物镜T值测量仪不仅可以测量物镜T值,而且还可以测量和标定各种卤钨灯的色温。文章阐述了用该仪器测量色温的原理、方法。并重点分析了多方面的误差因素。还指出了提高精度的方法和注意事项。实际测试结果和理论计算吻合较好:在2000～3000K范围内其测量精度为±10 K左右。用该仪器测量色温,操作简便、省时、经济并有较高的精度。建议推广应用。     

Robust geometric,phase and colour structured light projection system calibration

This paper introduces a new comprehensive procedure for both geometric and colour calibration of structured light system. In order to perform both geometric and colour calibration procedure, a new calibration artifact is proposed. The intrinsic and extrinsic parameters of projector and camera are estimated by using an extended pinhole camera model with a tangential and radial distortion. Camera image plane coordinates are obtained by extracting features from images of a calibration artifact. Projector image plane coordinates are calculated on the basis of continuous phase maps obtained from a fringe pattern phase reconstruction procedure. In order to stereo calibrate camera-projector system, pairs of corresponding image plane points are calculated with subpixel accuracy. In addition, one of three pattern views is used in colour calibration. RGB values of a colour field pattern detected by camera and their reference values are compared. This comparison leads to derivation of a colour transformation matrix. The performance of the proposed method is tested by measuring plane, sphere and distance reference. Also 360 degrees complex object 3D model from a set of measurements is obtained. Residual mean errors for all tests performed are calculated.     

Practical colour management

Spectrophotometers have been successfully used for colour measurement. This paper addresses digital imaging as a complementary and alternative method of colour measurement and appearance and an effective communication tool as part of a practical colour management programme within the supply chain of a textile retailer. The specific needs—to measure and communicate textured dyed material and printed fabric—are discussed, as well as the colour specification and quality control (QC) of currently un-measurable fabrics and accessories. A unique method of using digital imaging for the assessment of colour fastness will also be discussed.     

Two international colour meetings

Two international Colour meetings held in May 1961 have given an opportunity or scientists working in this field to meet and compare notes. The first was the Maxwell Colour Centenary in London, organized by the Colour Group, with the Institute of Physics and Physical Society, and the Jnter–Society Colour Council (of the U.S.A.), to celebrate the first demonstration of colour photography; it was deliberately kept informal as its primary purpose was an Anglo–American get-together, and its twenty–odd invited papers consisted mostly of reviews of progress in the field over the last hundred years. The second meeting was on a larger scale, held in Dusseldorf, and organized jointly by the Fachnormenausschuss Farbe im Deutschen Normenausschuss (FNF) and the Centre d'Jnformation de la Couleur (C.I.C.) of France, being the fifth in a series of JournCes Jnternationales de la Couleur. More than eighty papers covered a range of topics from colorimetry and colour vision to problems of education and the use of colour in fashion, decoration, and advertising.     

Studies of the electrochemical reduction processes of Bi, HTeO2 and their mixtures

The reduction process of Bi³⁺, HTeO₂⁺ and their mixtures on Au electrode surface was studied by cyclic voltammetry, linear sweep voltammetry, electrochemical impedance spectroscopy and chronoamperometry. XRD and EDS methods were also used to measure the reductive products prepared under different potentials and provide the evidences of the reactions. The results indicate that the reduction of HTeO₂⁺ occurs at more positive potential than that of Bi³⁺, but its reduction rate is slower and adsorption phenomenon exists during its reduction process. Bi₂Te₃ compound can be obtained potentiostatically at a proper potential in all the mixed solutions with concentration ratio CHTe+O₂/CBi3+ in our research range (0.1-10). But pure Bi₂Te₃ compound can only be obtained at 42 mV in the solution with concentration ratio CHTe+O₂/CBi3+ equaling to 1. And the formation of Bi₂Te₃ compound is an inductive co-depositing process: (1) HTeO₂⁺ + 4e⁻ + 3H⁺ → Te⁰ + 2H₂O, (2) 3Te⁰ + 2Bi³⁺ + 6e⁻ → Bi₂Te₃.     

RGB method in immunofluorescence investigations on stem cells

Colour is not related to a particular discipline, but it is transversely present in many circles and in almost all the aspects of life. It has a special value in art, but also as far as other disciplines are concerned, like the sciences, the colour is at the basis of some of their intrinsic significances and it often needed to allow the interpretation of some of their phenomena as well. As regards the development of cell biology knowledge, colour acquired more and more importance in revealing the observations of the researchers. A field in which the methods based on the colours are particularly employed is the immunofluorescence, used to identify specific proteins in cells and tissues. These techniques combine the fluorochrome properties with specific molecules, i.e. antibodies, directed against particular substances to investigate, for example a specific protein. In single immunofluorescence analysis, the signal from an excited fluorochrome corresponds to a particular protein. In multiple immunofluorescence analysis, two or more signals are simultaneously detected to show the localization of different proteins on the same sample. The three primary colours red, green and blue were currently assigned to the signals from immunofluorescence-processed samples and visualized by the RGB method. In the present work, different examples of RGB applications in immunocytochemical investigations are showed: the first concerns the multiple analysis of three markers, localized in different loci of the cell plasma membrane; the second is related to the co-localization of two signals in the same site of specific subcellular structures. In this case the secondary colours, obtained by overlapping the primary ones, demonstrate the specific co-presence of two proteins in the same site. With the present paper, the authors wish to underline the relevant role of colours also in those areas in which colours are the means not the end.     

Luminescent properties of (Y,Gd)BO3:Bi,RE (RE=Eu, Tb) phosphor under VUV/UV excitation

Bi³⁺- and RE³⁺-co-doped (Y,Gd)BO₃ phosphors were prepared and their luminescent properties under vacuum ultraviolet (VUV)/UV excitation were investigated. Strong red emission for (Y,Gd)BO₃:Bi³⁺,Eu³⁺ and strong green emission for (Y,Gd)BO₃:Bi³⁺,Tb³⁺ are observed under VUV excitation from 147 to 200 nm with a much broader excitation region than that of single Eu³⁺-doped or Tb³⁺-doped (Y,Gd)BO₃ phosphor. Strong emissions are also observed under UV excitation around 265 nm where as nearly no luminescence is observed for single Eu³⁺-doped or Tb³⁺-doped (Y,Gd)BO₃. The luminescence enhancement of Bi³⁺- and RE³⁺-co-doped (Y,Gd)BO₃ phosphors is due to energy transfer from Bi³⁺ ion to Eu³⁺ or Tb³⁺ ion not only in the VUV region but also in the UV region. Besides, host sensitization competition between Bi³⁺ and Eu³⁺ or Tb³⁺ is also observed. The investigated phosphors may be preferable for devices with a VUV light 147-200 nm as an excitation source such as PDP or mercury-free fluorescent lamp.     

Energy transfer between Sm and Er in orthophosphate YPO4

The energy transfer between Sm³⁺ and Er³⁺ ions in yttrium orthophosphate is studied. This choice of ions is based on the possibility of quantum cutting processes and the host material is selected according to the position of the 5d bands of the Sm³⁺ ion. The Sm³⁺ and Er³⁺ doped and Sm³⁺, Er³⁺ co-doped YPO₄ have been synthesized. Spectroscopic studies were done in the ultraviolet and vacuum ultraviolet ranges. The energy transfer between Sm³⁺ and Er³⁺ is very efficient but it does not lead to Er³⁺ visible emission. Whatever the excitation wavelength, the emission of co-doped samples mainly occurs in the infrared range.     

Polyethylene terephthalate (PET) bulk film analysis using C60, Au3, and Au primary ion beams

The damage characteristics of polyethylene terephthalate (PET) have been studied under bombardment by C₆₀⁺, Au₃⁺ and Au⁺ primary ions. The observed damage cross-sections for the three ion beams are not dramatically different. The secondary ion yields however were significantly enhanced by the polyatomic primary ions where the secondary ion yield of the [M + H]⁺ is on average 5× higher for C₆₀⁺ than Au₃⁺ and 8× higher for Au₃⁺ than Au⁺. Damage accumulates under Au⁺ and Au₃⁺ bombardment while C₆₀⁺ bombardment shows a lack of damage accumulation throughout the depth profile of the PET thick film up to an ion dose of ∼1 × 10¹⁵ ions cm⁻². These properties of C₆₀⁺ bombardment suggest that the primary ion will be a useful molecular depth profiling tool.