声纳导流罩吸声障板声学特性的研究

本文研究内容属于舰艇声兼容性技术研究的一部分。应用声学软件SYSNOISE计算了,声纳定向发射时某试验用声纳导流罩及尾部吸声障板的声场特性,同时进行相同工况的水下模型试验。计算结果与试验结果吻合良好,说明应用声学软件对声纳声场进行计算是一种可行的方法,有可能推广至其他的水下模型的声场计算。结果数据反映了吸声障板对声纳定向发射时声场的影响,为舰艇总体声纳导流罩内吸声障板的结构设计、声兼容设计提供依据。     

基于禁忌搜索的正交多相码波形设计

正交多相码信号有低自相关旁瓣值和低互相关峰值的特点,可以用于编队工作的主动声纳中,降低声纳之间的直达波干扰。文章提出用禁忌搜索的方法设计正交多相码信号集,优化正交多相码的自相关旁瓣值和互相关峰值。通过对实验结果的分析和多种算法之间的比较,证明了禁忌搜索算法能够设计相关性能更优的正交多相码。文章还通过数值实验,分析了正交多相码信号集的相关性能与信号数量和码长的关系。     

连续波主动声呐的直达波抑制处理方法研究*

针对连续波主动声呐面临的强直达波干扰掩蔽目标回波的问题,该文在双基地配置已知的前提下,提出基于声屏蔽和常规方向零陷的联合抑制方法。即在精确的发射点声屏蔽的基础上,利用常规方向零陷技术减少声源附近方位的能量影响,从而达到更好地消除强直达波干扰的目的。仿真结果表明,在极低的信干比条件下,联合抑制方法比声屏蔽方法、常规方向零陷方法具有更好的干扰抑制性能。该方法可以有效减少连续波主动声呐的直达波的影响,在时间-距离模糊度图上得到清晰的目标位置。     

一种消除角度响应影响的多波束声强数据自适应改正方法

针对多波束反向散射强度(Backscatter Strength,BS)数据在采集过程中受到声学散射机理而产生的角度响应(Angular Response,AR)影响,而目前声学硬件方面尚未完美解决且现有后处理改正方法在复杂海底底质环境下适应性较差,尤其在高入射角区域的改正效果甚为不理想的问题,为此,给出了一种基于散射强度的自适应角度响应改正模型。首先获取连续脉冲(Ping)平均散射强度数据的角度响应曲线;其次使用高斯拟合方法对角度响应曲线进行平滑拟合处理,进而对其解算二阶导数提取角度响应模型改正参数;最后给出顾及高入射角区域的单Ping反向散射强度数据的分段处理改正模型。实验结果表明,该方法与传统方法相比,整个发射扇区散射强度平均偏差精度约提高30V,尤其在影响较大的高入射角区域,平均偏差精度约提高40V,并且该区域的标准差精度也提高了近30%。该模型较好地解决了多波束在非正射情况下获取海底精准散射声强的问题,削弱了声波散射机理的影响;同时也解决了散射强度过渡不均衡、中央波束区域改正异常等问题。因此,提高了多波束反向散射强度的可靠性,可以真实地呈现出海底实际的地貌。     

A direct method for acoustic impedance measurement based on the measurement of electrical impedance of acoustic transmitter

A simple and straight forward method for acoustic impedance measurement is presented and evaluated. In this method a speaker is used as the signal source. The relationship between the electrical impedance of the speaker and its acoustical load is developed and studied. It is shown that the electrical current and voltage of the speaker relate to the acoustical pressure and volume velocity. The mechanical and acoustical impedances are therefore easily derived by measuring the electrical current and voltage of the circuit. The proposed method yield itself to the automatic computer measurement and can be used for the field and in situ measurements.Comparison of the measurement data with those from other methods proves the applicability and accuracy of the proposed method.     

小阻尼界面房间声传输函数和声脉冲响应函数的有限元素法

有限元法可用于以声波动方程为基础通过数值计算求解室内声场,适用于分析界面阻抗非均匀分布和复杂形状房间内声场的低频特性。本文首先介绍了小阻尼界面条件下室内声场简正方式、声衰变系数、混响时间的ＦＥＭ计算方法。在此基础上导出了房间内两点之间声传输函数和声脉冲响应函数的ＦＥＭ计算模型,并以矩形房间为例详细讨论了有关细节。本文所讨论的计算模型可以映房间内不同的声源点,接收点位置上的声压频谱特性和脉冲响应的时     

Manipulation with sound and vibration: A review on the micromanipulation system based on sub-MHz acoustic waves

Manipulation of micro-objects have been playing an essential role in biochemical analysis or clinical diagnostics. Among the diverse technologies for micromanipulation, acoustic methods show the advantages of good biocompatibility, wide tunability, a label-free and contactless manner. Thus, acoustic micromanipulations have been widely exploited in micro-analysis systems. In this article, we reviewed the acoustic micromanipulation systems that were actuated by sub-MHz acoustic waves. In contrast to the high-frequency range, the acoustic microsystems operating at sub-MHz acoustic frequency are more accessible, whose acoustic sources are at low cost and even available from daily acoustic devices (e.g. buzzers, speakers, piezoelectric plates). The broad availability, with the addition of the advantages of acoustic micromanipulation, make sub-MHz microsystems promising for a variety of biomedical applications. Here, we review recent progresses in sub-MHz acoustic micromanipulation technologies, focusing on their applications in biomedical fields. These technologies are based on the basic acoustic phenomenon, such as cavitation, acoustic radiation force, and acoustic streaming. And categorized by their applications, we introduce these systems for mixing, pumping and droplet generation, separation and enrichment, patterning, rotation, propulsion and actuation. The diverse applications of these systems hold great promise for a wide range of enhancements in biomedicines and attract increasing interest for further investigation.     

A new method of flame temperature measurement utilizing the acoustic emissions from laser-induced plasmas

The optical emissions from laser-induced plasmas have been successfully exploited for elemental composition measurements in flames; however, the information from the accompanying plasma-generated acoustic emissions has not been well utilized. In this study, we investigated the influence of flame temperature and composition on the acoustic emissions from laser-induced plasmas in an ethylene-air premixed flame. The acoustic emissions are sensitive to temperature, and a negative correlation can be established. The effect of composition on acoustic emissions was found to be second order compared to that of temperature. Based on these findings, we introduce acoustic-based laser-induced breakdown thermometry (LIBT). A statistical analysis was performed to mitigate the bias introduced by anomalous extreme values. The spatial and temporal resolution of LIBT were also analyzed to demonstrate its potential to perform simultaneous composition and temperature measurements when used along with laser induced breakdown spectroscopy (LIBS). Finally, the temperature distribution in an ethylene-air counter-flow diffusion flame was measured; and the results compared favorably with numerical results.     

A novel acoustic emission beamforming method with two uniform linear arrays on plate-like structures

A novel acoustic emission (AE) source localization approach based on beamforming with two uniform linear arrays is proposed, which can localize acoustic sources without accurate velocity, and is particularly suited for plate-like structures. Two uniform line arrays are distributed in the x-axis direction and y-axis direction. The accurate x and y coordinates of AE source are determined by the two arrays respectively. To verify the location accuracy and effectiveness of the proposed approach, the simulation of AE wave propagation in a steel plate based on the finite element method and the pencil-lead-broken experiment are conducted, and the AE signals obtained from the simulations and experiments are analyzed using the proposed method. Moreover, to study the ability of the proposed method more comprehensive, a plate of carbon fiber reinforced plastics is taken for the pencil-lead-broken test, and the AE source localization is also realized. The results indicate that the two uniform linear arrays can localize different sources accurately in two directions even though the localizing velocity is deviated from the real velocity, which demonstrates the effectiveness of the proposed method in AE source localization for plate-like structures.     

Numerical treatment of acoustic problems with the smoothed finite element method

We incorporated a cell-wise acoustic pressure gradient smoothing operation into the standard compatible finite element method and extended the smoothed finite element method (SFEM) for 2D acoustic problems. This enhancement was especially useful for dealing with the problem of an arbitrary shape with violent distortion elements. In this method, the domain integrals that involve shape function gradients can be converted into boundary integrals that involve only shape functions. Restrictions on the shape elements can be removed, and the problem domain can be discretized in more flexible ways. Numerical results showed that the proposed method achieved more accurate results and higher convergence rates than the corresponding finite element methods, even for violently distorted meshes. The most promising feature of SFEM is its insensitivity to mesh distortion. The superiority of the method is remarkable, especially when solving problems that have high wave numbers. Hence, SFEM can be beneficially applied in solving two-dimensional acoustic problems with severely distorted elements, which, in practice, have more foreground than regularity mesh.     

An inversion modelling method to obtain the acoustic power of the noise sources in a large factory

A common problem for large factories that wish to decrease their environmental acoustic impact on neighbouring locations is to find out the acoustic power of every noise source. As these factories cannot stop their activity in order to measure each source individually, a procedure is needed to obtain the acoustic powers with the factory under normal operating conditions. Their contribution to the overall sound pressure level at each neighbouring location can then be found and it is possible to calculate the improvements obtained after any modification of the sources. In this paper an inversion modelling method is used to do so. Acoustic powers are obtained by means of field sound pressure level measurements and with the use of a sound propagation software. A careful analysis of the solution has been carried out by simulating errors on the measured data in order to detect possible correlations between the acoustic power of different sources and avoid misleading interpretations of the results. The whole methodology has been applied to a liquid-gas production factory.     

Simulation of the spatial distribution of the acoustic pressure in sonochemical reactors with numerical methods: A review

Numerical methods for the calculation of the acoustic field inside sonoreactors have rapidly emerged in the last 15 years. This paper summarizes some of the most important works on this topic presented in the past, along with the diverse numerical works that have been published since then, reviewing the state of the art from a qualitative point of view. In this sense, we illustrate and discuss some of the models recently developed by the scientific community to deal with some of the complex events that take place in a sonochemical reactor such as the vibration of the reactor walls and the nonlinear phenomena inherent to the presence of ultrasonic cavitation. In addition, we point out some of the upcoming challenges that must be addressed in order to develop a reliable tool for the proper designing of efficient sonoreactors and the scale-up of sonochemical processes.     

The contribution of aryepiglottic constriction to “ringing” voice quality—A videolaryngoscopic study with acoustic analysis

Fiberscopic video laryngoscopy was performed on five professional singers to determine the presence or absence of aryepiglottic narrowing as a function of voice quality. Each sang “Happy Birthday” and parts of the “Star Spangled Banner” in six different voice qualities: speech, falsetto, sob (a low larynx with a vocal tract expanded by relaxing the middle constrictors), twang, belting, and opera. Several features were found to be common among the subjects and related to specific qualities. Aryepiglottic constriction was present in all singers in twang, belting, and opera qualities. Spectrographic analysis related the constriction to the presence of the “singer's formant.” The presence of this type of constrictive behavior will require further research to ascertain the possible benefits to those for whom a louder voice is essential and to understand the relationship of this constrictive maneuver to the natural closure functions of the larynx.