HIRFL改造中的加速器物理问题

从加速器运行的角度对兰州重离子加速器 HIRFL建成以来所存在的问题进行了总结 ,结合放射束物理和冷却储存环 CSR对 HIRFL的新要求 ,从加速器的物理设计方面提出了一些改进方案 .主要问题有 :超低能束流传输的空间电荷效应的影响 ,扇聚焦回旋加速器 SFC高频加速电压不对称对束流轨道的影响 ,用半频聚束的方式补偿两台回旋加速器的纵向不匹配 ,前束线上聚束器的工作模式的选取 ,强杂散磁场对超低能和低能束流传输的影响 ,分离扇回旋加速器 SSC注入区过垫补磁场对注入束流轨道的影响 ,SFC和 SSC的单圈引出 ,重离子通过剥离膜后的束流损失和束流品质的变坏等.From the viewpoints of the HIRFL operation and the new requirements to HIRFL by the study of radioactive beam physics and CSR project, the HIRFL upgrading program has been proposed after studying the existing problems found during the operation and new problems when increasing the beam intensιty and ion variety. The accelerator physics problems of the upgrading program were discussed here, which include the space charge effect on the very low energy beam line...     

基于HIRFL-CSR中剥离器的支束线物理设计

介绍了通过剥离器后不同电荷态的束流在弯曲磁铁中的传输情况,由此引出一种切割束流的方法,在此基础上设计了一条支束线,以实现两个实验终端同时供束,增加供束时间.在束运线设计过程中,根据HIRFL CSR的实际条件,对束流的中心轨迹和束流包络做了详细的计算,给出了束流输运线的几何布局和各个元件的基本物理参数. A new branch beam line downstream of the stripper located between SFC and SSC is designed to collect the beams with the charge states other than the most intensive one. The layout of the branch beam line and the physical parameters for each dipole and quadrupole are given based on careful calculations.     

HIRFL装置主动式点扫描束流配送系统的Monte Carlo模拟优化

为获得适用于HIRFL 装置主动式点扫描束流配送系统配送的碳离子束,利用Monte Carlo (MC) 工具SHIELD-HIT12A 研究了配送距离和微型脊形过滤器结构周期对治疗室等中心处束斑半高宽(FWHM) 和剂量平坦度的影响。模拟研究发现:束流配送距离越短,束斑FWHM越小,但剂量平坦度越差;微型脊形滤器结构周期是影响剂量平坦度的关键因素,周期越小,剂量平坦度越好。通过模拟研究得出:在HIRFL装置重离子治疗终端将真空窗设置在距等中心距离小于125 cm 时,采用结构周期为2 mm微型脊形过滤器可以满足主动式点扫描照射对束斑FWHM和剂量平坦度的要求。To obtain carbon ion beams suitable for the active spot scanning beam delivery system at the Heavy Ion Research Facility in Lanzhou (HIRFL), the Monte Carlo program SHIELD-HIT12A was used to study the influences of beam delivery distance and structure period of mini ridge filter on full width at the half maximum (FWHM) of beam spot and dose flatness at the isocenter of the treatment room. The present simulation study shows that the shorter was the beam delivery distance, the smaller was the FWHM of beam spot, but the worse was the dose flatness. The structure period of mini ridge filter was a key factor to account for the dose flatness at the isocenter. The smaller was the structure period of mini ridge filter, the better was the dose flatness. Based on the simulation results, we conclude that 2 mm structure period for a mini ridge filter statisfies the requirements on the FWHM of beam spot and dose flatness at the isocenter for the active spot scanning beam delivery system at HIRFL when the distance between the vacuum window and the isocenter is set shorter than 125 cm in the nozzle.     

兰州重离子加速器冷却储存环束流累积研究

对兰州重离子加速器冷却储存环加速器主体的主要功能环——主环的束流累积方法和设计进行了研究 .为了使主环对不同种类的重离子束流都具有较强的累积能力 ,在设计时考虑采用电子冷却参与下的两种束流累积方法 :多次多圈注入和射频堆积 .对这两种方法 ,电子冷却的冷却时间都是将束流累积到高流强的关键因素. The beam accumulation methods of HIRFL CSR(Heavy Ion Research Facility of Lanzhou and Cooler Storage Rings) project were studied. Two accumulation methods will be adopted to increase the beam intensity of CSRm. For both multiple multi turn injection method and RF stacking method, electron cooling of beam plays an important role.     

束流强度探测变压器

兰州重离子加速器冷却储存环工程 (HIRFL CSR)主环和实验环上带电粒子束流强度的测量和监视拟由环型束流变压器实现 .通过对各种磁芯性能的分析和比较 ,束流变压器磁芯材料最终采用环形高磁导率超微晶合金 ,可测量束流脉冲的频率范围为 0 .2 - 2MHz .选择低噪声放大器将感应信号适当放大 ,可以实现对最小流强为 1μA束流的测量. The intensity of a pulsed beam of charged particles in the Cooling Storage Ring Project of Heavy Ion Research Facility in Lanzhou (HIRFL-CSR) will be measured with a toroidal current transformer. By comparing and analyzing the properties of kinds of magnetic cores, a strip wound toroidal core is adopted, which is made of a high-permeability alloy and can measure a pulsed beam with frequency range of 0.2 to 2 MHz. The permeability of Fe-based nanocrystalline alloy varying with frequency is measured...     

SFC的中心区改造

本文描述了SFC中心区的新结构,采用ECRIS后,在中心区安装了螺旋线型静电偏转器,磁极和D电极都作了修改,送入HIRFL的首次束流~(40)Ar~(8+)的流强可大于1.2μA。The new structure of SFC centre region is described. After an ECRIS was used, a spiralinflector had been assembled at the centre of the machine. The magnetic plog and the Dee electrodewere modified. The current of the first beam ~(40)Ar~(8+) sent to HIRFL is more than 1.2μA.     

在HIRFL上的中能重离子物理基础和应用研究

本文总结了三年来在兰州重离子研究装置(HIRFL)上进行的科研工作和取得的成果.简单介绍了HIRFL 的工作状态、次级束流线与ECR 离子源的发展、中能重离子引起的反应研究、热核与远离β稳定线核素的合成与研究和重离子束的应用等. A The scientific activities and achievements made at the Heavy Ion Research Facil- ity Lanzhou (HIRFL) during the past three years are summarized.In addition to the brief in- troduction of the operation status of HIRFL and the development of the secondary beam line and an ECR ion source,the paper describes the experimental studies of intermediate ener- gy heavy ion-induced reactions,the investigation of hot nuclei,the synthesis and study of nuclei far from ...     

ADS注入器II的5 MeV高能传输线的设计与搭建

ADS先导专项的注入器Ⅱ计划在将质子束通过一个Cryomodule加速到5 MeV后,进行10 mA连续束流的调试,以验证ADS低能段的强流超导直线加速器技术。为了将50 kW的束流功率沉积到束流垃圾站,需要搭建一条高能束流传输线,从超导段开始传输束流。采用两套三组合四极透镜控制束流包络及垃圾站的束流尺寸,利用诊断真空室进行水平和垂直发射度的测量。为避免束流产生的真空管道损伤,该传输线必须确保束流无损失地传输到垃圾站。A CW 10 mA,5 MeV beam commissioning of CADS Injector Ⅱ is planed recently to test the high power superconduction linac techniques.To transport 50 kW beam from linac to the beam dump,a high energy beam line (HEBT) line is designed and setup.Two Triplet are used to control the beam size along HEBT and at the beam dump.One diagnostics box is used for horizontal and vertical emittance measurement.To avoid damages to the vacuum pipe,beam should be transported to the beam dump without losses.The details of the HEBT design will be described in the paper.     

HIRFL-CSR实验环中束流损失机制及寿命研究

分析了在储存环中回旋的离子束与残余气体分子、 内靶和冷却电子束相互作用时的损失机制及相应的束流寿命， 针对兰州重离子加速器冷却储存环实验环内靶模式， 计算了50—500 MeV/u 12C6+, 36Ar18+, 132Xe54+和 238U92+等束流在各种损失机制影响下所对应的束流寿命和总的束流寿命。 结果表明: 影响束流寿命的主要因素是与内靶分子（原子）之间的电荷交换及与冷却电子束之间的辐射复合； 对于重离子束 132Xe54+和 238U92+， 与冷却电子束之间的辐射复合是影响其储存寿命的主要因素。The loss mechanism and lifetime of ion beams in collisions with residual gas, internal target and electrons in e cooler in heavy ion cooler storage rings were studied. The partial beam lifetimes resulting from various loss mechanisms and the total beam lifetimes of 50—500 MeV/u12C6+, 36Ar18+, 132Xe54+ and 238U92+ stored in the experimental ring of the Cooler Storage Ring at the Heavy Ion Research Facility in Lanzhou (HIRFL CSR) were calculated. The calculations indicate that the charge exchange process between ion beams and the internal target, as well as the radiative recombination process with the electrons in e cooler restrict the beam lifetime considerably. For heavy ion beams such as 132Xe54+ and 238U92+, the radiative recombination is the dominant loss mechanism     

面向HIRFL-CSR主动式点扫描技术的剂量标定方法研究(英文)

基于HIRFL-CSR肿瘤重离子治疗终端主动式束流配送系统发展了面向三维点扫描适形调强治疗技术的在线监测器点扫描剂量标定方法。为了验证点扫描剂量标定方法的稳定性和可靠性,利用HIRFL-CSR提供的C离子束考察了在线监测器剂量标定因子的能量依赖以及不同扫描步长的影响。结果表明:在线监测器剂量标定因子存在能量依赖;不同扫描步长对剂量标定因子影响较小（偏差小于1.8%）。证明了点扫描剂量标定方法的稳定性和可靠性。鉴于在三维点扫描适形调强治疗技术中影响在线监测器点扫描剂量标定因子的因素较多,建议今后续继续研究点扫描剂量标定因子影响因素,修正和完善点扫描剂量标定方法。As an important step of the application of spot scanning technique to heavy ion therapy, an experimental calibration procedure of online beam monitors based on standard of absorbed dose to water has recently been developed for scanned pencil like carbon ion beam in the deep seated tumor therapy terminal at the Heavy Ion Research Facility in Lanzhou (HIRFL). In this work, creating homogeneous irradiation field with steerable spot beam was tested using a 207 MeV/u penci like carbon ion beam. Then the verification of energy dependence of the calibration factors (CFs) and the influence of scanning step on the CF were also shown, as a part of the heavy ion clinic dosimetry researches. The results showd that the monitor CF presented energy dependence and performed stable response with deviation of 1.8% for the variation of scan steps. In this paper, the suitability and effectiveness of beam monitor calibration procedure for dynamic particle beam delivery were verified and the further research points to improve the calibration procedure were suggested.     

三维自散焦介质中的暗光束诱导亮光束聚焦

为了获得一种对称压缩圆光束的方法,系统研究了三维自散焦介质中亮暗光束对的共同传输。数值结果表明:当两光束中心重合时,若抽运光(暗光束)初始振幅远大于信号光(亮光束)初始振幅,抽运光将通过交叉相位调制(XPM)诱导信号光聚焦,使得信号光的圆形光斑被对称压缩。讨论了光束参量对信号光聚焦效果的影响,发现抽运光初始振幅越大,信号光聚焦越强。当抽运光初始振幅一定时,暗光束的初始束宽存在最佳值使得信号光压缩最强。当抽运光与信号光的波长比取值为0.5~1.5时,信号光聚焦程度随着波长比的增大而有所降低。还设计了验证理论结果的实验方案。     

洛伦兹光束的传输特性研究

运用光束传输的二阶矩理论，对洛伦兹光束的传输特性进行了研究，给出了束腰、横向发散角和光束传输因子的表达式.横向束腰仅取决于对应方向上的光束参数；而横向发散角和光束传输因子却取决于两横向上的光束参数.给出了光束传输因子随两横向光束参数的变化关系曲线.结果表明，两横向上的光束传输因子随两光束参数的变化规律是不相同的，而整体的光束传输因子随两光束参数的变化是前两者的综合体现；但在傍轴情形下，光束传输因子趋向于常数141，因此，对于相同束腰，其傍轴条件下的发散性为对应高斯光束的141倍.所以，洛伦兹光束适合用于描述某些发散程度较大的激光光源. 关键词： 洛伦兹光束 光束传输 二阶矩     

Analysis of beam quality for the laser beams after spectral beam combining

The beam quality of the laser beams after spectral beam combining (SBC) has been analyzed in this paper. Based on the propagation model of the spectral beam combining system, the expression for the output field of an individual beam passing through the spectral beam combining system with lens aberration has been given and the intensity distribution of the combined beam has been studied by the principle of incoherent superposition. Consequently, according to the intensity second-order moments method, the M²-factor of the combined beam has been calculated and the effect of lens aberration on the characteristics of the combined beam has been analyzed quantitatively. It can be shown that the SBC system can improve the beam quality of laser array significantly, and the M²-factor of the combined beam passing through the ideal spectral beam combining system is almost the same as that of an individual beam. For the spectral beam combining system with lens aberration, the spherical aberration has greater effect on the off-axis beam than on the on-axis beam, and the beam quality of combined beam degrades with increase in lens aberration.     

扩束准直光学系统中光学元件失调对高斯光束传输变换的影响分析

基于广义惠更斯-菲涅尔衍射积分公式, 以高斯光束为激光束模型，推导了激光光束通过失调扩束准直光学系统的传输公式，分析了光学元件失调对扩束准直光学系统输出光束传输特性的影响，并在此基础上进行了仿真。实验结果表明，高斯光束通过失调扩束准直光学系统时，出射光束变为偏心高斯光束，光学元件失调程度越大，输出光束越偏离光轴，光束质量越差。在同样的失调下，长焦距光学元件对输出光束影响更大，因此在激光扩束准直光学系统中，调整长焦距光学元件更为重要。     

高阶模高斯光束整形方法研究

研究了高阶模高斯光束的整形方法.在高阶模高斯光束和平顶光束理论模型的基础上,分别选择了平项洛仑兹函数和费米狄拉克函数作为平顶光分布函数,利用能量守恒定律,分别推导针对拉盖尔-高斯光束和厄米特-高斯光束整形系统中入射光与出射光的映射函数.最后利用ZEMAX软件设计了针对TEM01模高斯光束进行整形的非球面透镜元件.结果表...     

Performance of the plugged-in 22Na based slow positron beam facility

The Beijing intense slow positron beam facility is based on the 1.3 GeV linac of Beijing ElectronPositron CoUider (BEPC) aiming to produce mono-energetic intense slow positron beam for material science investigation. The plugged-in 22Na based slow positron beam section has been newly constructed to supply continuous beam time for the debugging of positron annihilation measurement stations and improve the Beijing intense slow positron beam time using efficiency. Performance testing result of the plugged-in 22Na based slow positron beam facility are reviewed in this paper, with the measurement of the beam transport efficiency, the view of beam spot, the adjustment of beam position, the measurement of beam intensity and energy spread etc. included.     

Ce∶KNSBN晶体中光扇效应的响应时间特性研究

以单束光入射Ce∶KNSBN晶体,系统研究了不同入射光波长下,Ce∶KNSBN晶体中光扇效应的响应时间随入射光强度及光入射角的变化情况.结果显示,相同的入射光强度及光入射角下,入射光波长较短时,光扇效应到达稳态的时间较短.相同的入射光强度下,随光入射角的增大,响应时间先减小后增大,但不同波长入射光下,最小值对应的光入射角不同,入射光波长为532 nm时,响应时间最小值对应的θ为15°；入射光波长为632.8 nm时,对应的θ为15.5°.同时研究发现,入射光强度逐渐增大的过程中,响应时间在逐渐减小.     

四瓣高斯光束的Gyrator变换性质和矩形空心光束的产生

基于Gyrator变换,推导了四瓣高斯光束场分布的解析表达式,研究了四瓣高斯光束通过Gyrator变换后的光强分布和相位分布.结果表明:在Gyrator变换过程中,四瓣高斯光束能够转换为具有光涡旋的矩形空心光束,在获得矩形空心光束时其四顶角处光束强度最强,而四条边上的光束强度分布几乎是均匀的.对影响矩形空心光束强度和相位分布的光束参数和变换角进行了详细的分析,发现光束阶数不同,产生不同类型的空心光束;Gyrator变换的变换角则影响空心光束能量分布;空心光束亮环的大小由四瓣高斯光束的束腰宽度决定,束腰宽度越大,矩形空心光束的宽度越小.     

Ce:KNSBN晶体光扇效应的入射光强度阈值特性研究

采用非同时读出条件下的两波耦合实验装置,以单束光入射Ce:KNSBN光折变晶体,系统研究了Ce:KNSBN晶体中光扇效应随入射光偏振态、入射光强度、光入射角的变化情况.结果表明异常偏振光入射晶体时光扇效应明显,且存在明显的入射光强度阈值特性,入射光强度阈值为38.2 mW/cm2;相同光入射角下,稳态光扇强度随入射光强度的增强而明显变大;对应相同的入射光强度,稳态光扇强度随光入射角θ的增大而增大,当θ为15°时到达峰值,而后随θ的增大而逐渐减小.同时对光扇效应的入射光强度阈值特性以及稳态光扇强度随入射光偏振态、入射光强度、光入射角的变化作出了相应的物理解释.     

信号光束宽度对不同漂移误差的空间光通信系统误码率影响的研究

信号光束宽度直接影响着空间光通信系统误码性能，光束宽度的选择需要综合考虑多种因素。研究了激光在大气湍流中的光束漂移、光强闪烁和平均光强与光束宽度的关系，得到考虑漂移因素的光强闪烁和平均光强与光束宽度的关系。分析表明在弱湍流条件下，光强闪烁和平均光强与光束宽度和对准精度相关，讨论了在水平路径上未跟踪补偿和跟踪补偿的光束的光强闪烁和平均光强随光束宽度的变化趋势。利用数值方法得到光强闪烁最小、平均光强最大时的光束宽度取值区间，通过光强概率分布关系和实际应用要求实现了光束宽度的优化选取。结果表明，在相同系统信噪比情况下，跟踪光束与未跟踪光束相比，系统误码率低，光束宽度值相对较小，取值区间大。